Macbook Connects To Spotify, Browers Won't Work

Running Lion on a late 2007 macbook. The internet says it is connected and it connects to spotify. Spotify plays, that runs perfectly. However, when a browser is pulled up nothing loads and it says it can't be loaded. Tried deleting all networks adding fresh network. Tried different DNS. Tried resetting PRAM. I have no idea what is causing this can anyone please help??

skype works, too.

Similar Messages

  • When I try to download the windows support software it is coming up with an error message saying I am not connected to the internet but having checked the network diagnostics several times I am definitely connected but it still won't work. Any ideas?

    When I try to download the windows support software it is coming up with an error message saying I am not connected to the internet but having checked the network diagnostics several times I am definitely connected but it still won't work. Any ideas?

    I get a problem like yours. I have a mac mini with 2 hdds the server and hd2 I installed windows 7 and the windows works fine. except it will not allow me to get on the net.  I get error 651.  I can boot back to lion and the internet connection works. I googled and error 651 does seem to show up.  I would like  a work around.

  • I have a MacBook My pinch-open-close won't work. I've done everything suggested on the website.

    I have a MacBook My pinch-open-close won't work. I've done everything suggested on the website.

    Your home button must be damages somehow. i know that you can use your phone without it using an accessibility feature called assisstive touch. It is a little icon that will always be on your device's display and can function as a home button. This is only a temporary solution. Eventually you should see if you qualify for some kind of replacement.

  • I have 2 macbooks, and my thunderbolt display won't work on one. HELP!

    I have to Macbook Pros. The one for my work is connected to my Thunderbolt. When I tried to connect my personal one to watch a movie, it won't connect. I tried "detect displays" and "gather displays" - nothing.
    HELP!!
    Dana

    Welcome to the Apple Support Communities
    Note that the Thunderbolt Display can only work with Macs with Thunderbolt ports (Early 2011 and newer MacBook Pro). If your Mac is older, it won't connect to this display.
    To check what MacBook Pro you have, see > http://support.apple.com/kb/ht4132 If you have a Mid 2010 or older MacBook Pro, you can't use it with your Thunderbolt Display

  • My MacBook pro's power button won't work.

    So my MacBook pros power button wouldn't work, there fore I couldn't switch the notebook off, which I need to do to try and get access to my houses wifi, which strangely wouldn't connect although would t my iPad and iPhone. So I turned the laptop off through the keyboard short cut and now when I try to turn it back on, the button won't work. The laptop was running perfectly fine (appart from the Internet connection) it was charging great and should be duly charged at the minute, i just can't find a way to turn it om, is there anyway other than the button? And what could be wrong with the button itself, as I'm clueless.

    System Preference > Trackpad > Point & Click > Secondary click
    Make sure that "Secondary click" is enabled.
    Click the  black downward arrow to get the pop-up and pick your choice.
    Best.

  • My macbook pro is freezing/sound won't work

    A few days ago my Macbook pro started freezing up and requiring a forced power off each time. Sometimes the screen would go completely white, other times the cursor would still move but the display was broken and unable to be clicked. It happens at random intervals, sometimes without me even running any programs it will freeze up and go to a blank screen. A lot of times it takes a few consecutive tries to actually restart it in the first place.
    Anyway, I contacted Apple Support Chat and the employee helped me to Repair the Disk Permissions which provided a temporary fix. After it kept acting up later, I followed her instructions to do both a PRAM reset and SMC reset. However, after performing both of those today now my screen has gone dark blue a few times and also the sound won't work with or without headphones.
    Could someone please help me?

    A few days ago my Macbook pro started freezing up and requiring a forced power off each time. Sometimes the screen would go completely white, other times the cursor would still move but the display was broken and unable to be clicked. It happens at random intervals, sometimes without me even running any programs it will freeze up and go to a blank screen. A lot of times it takes a few consecutive tries to actually restart it in the first place.
    Anyway, I contacted Apple Support Chat and the employee helped me to Repair the Disk Permissions which provided a temporary fix. After it kept acting up later, I followed her instructions to do both a PRAM reset and SMC reset. However, after performing both of those today now my screen has gone dark blue a few times and also the sound won't work with or without headphones.
    Could someone please help me?

  • Mail Client Crashing, Mac Messenger won't connect, 1 USB port won't work!!!

    Any ideas on why my macbook pro has the above probs.....Wen I open mail and click on a message, Mal just crashes and gives me a message to relaunch. MSN won't connect no matter how many times i reinstall it and my son decided to unplug his Ipod from the usb port and now anything i plug into the port isn't recognised.......Pleeeeeeaaassseeeee Help!!!!! TY

    Both cables (Cat5e and Cat6) that I used was tested with my WD live hub and worked at 1 Gbps. The Cat5e is not shielded and I'm fairly confident the Cat 6 cable is unshielded as well. I should mention at this point that I've made my own network patch leads for over 10 years now and my networking career started out using coax cables. I would say that I know what I'm doing and can concluded with 100% certainty that it is not the cables.
    After installing Windows 7 through Bootcamp there is not even an option in the network adapter setting to set the speed any faster than 100 Mbps.
    After going to my local Apple store (30 Km away in London!) the genius I spoke with suggested I book a slot and bring it in for them to test to determine if a new logic board should be ordered. I must be honest, I thought however I spoke with would treat me like an idiot and try and blame anything but the mac but she listened and agreed with my assessment and suggested I bring it it for a test.

  • My Macbook connects to Internet but won't open webpage

    Thanks in advance for reading this. My Macbook shows various Airport connections but hasn't worked for a while unless it is directly plugged into my modem. I just set up a new modem and connect via Airport. The Airport signal shows that it is strong and connected, but I cannot open a web page. Any ideas? I'm not sure of my operating system--I bought this mac in June and I know I don't have the fancy new one. Thanks so much.

    Your post is confusing. Your airport can show many signals but that doesn't mean you're on any of those networks - which should require entering some sort of password. Where I'm sitting now, my airport icon shows 9 networks of which 7 are locked and I'm on one and haven't tried the other that might be open. You need to join a network, which you can do by selecting that option from the drop down menu - if you know the password. (You can also open the Network system preference.)
    The version of the OS doesn't matter much, though what the airport drop down menu shows will be different from 10.4 to 10.5.
    In other words, it sounds as though you're confusing having a wireless signal with being connected to the wireless network and thus to the internet.

  • Sync says not connected to Internet so won't work

    I hope somebody can help!
    Just upgraded to Desktop Manager 5 from version 4. All went well - in fact a painless update of all my software, too, which was WONDERFUL.
    However, I cannot sync my current data (it restored the previous sync when updating software) as whenever I start the Sync process I get a message saying, "Your computer must be connected to the Internet to perform the operation. Please ensure you are able to connect to the Internet and try again."  No matter how often I push the Retry button, all I get is the same message and the Sync won't run.
    The problem here is that I AM connected to the Internet (in fact, the device software check works fine) and all other programs that use the Internet (including Outlook) are running perfectly. How can I get the software to recognise that I'm connected? I really need to sync my contacts, etc., etc. from Outlook...
    Many thanks
    Guy

    Hi and welcome to the forums!
    A couple of places for you to visit: Blackberry 101    Tips & Tricks
    See if this kb article doesn't help:   Internet connection required
    Let us know how it goes.
    Great to have you here!
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • IPhone connects to WiFi but won't work.

    Ever since I got my iPhone 4, it connects to the WiFi but it won't do things using WiFi so I usually end up using 3G. But this only happens at my house. I works perfectly on the bus and at school. Same thing happens to my sister's iPhone 4 and recently we had guests over and I connected one of them to the WiFi and she had the same problem (iPhone 4) My dad has an iPhone 5 and I'm pretty sure it works perfectly for him. Please help. I've tried everything. Forgetting the network, resetting my phone, restoring my phone. Any suggestions please?

    Seems to be a problem with your WiFi router.
    If your iPhone can not access the internet using WiFi, due to low signal strength, low internet speed, router overload, or perhaps a wrong router setting (child safety lock, firewall?), it automatically accesses the internet using 3G.
    You just have to find the error...
    Good luck ;-)

  • I tried updating my Macbook Pro and now it won't work?

    I had OS Mountain Lion 10.8.2 for my MacBook Pro (version: late 2012) and I tried updating the operating system. The update was about three out of seven minutes in when a box popped up and said there was an error updating and that the process must restart. I clicked "okay" and waited for a couple of minutes but my screen was all gray and nothing else. I thought my MacBook froze, so I manually restarted it by holding down the power button and then pressing it again and now my screen is gray with the apple symbol and black coded text with writing such as "Unable to find driver for this platform", "Mac OS Version: Not yet set" and "System uptime in nanoseconds: 242856217", along with a series of codes such as " panic(cpu 0 caller 0xffffff8008c59241)". The screen is stuck like this and will not change. I have tried manually restarting it but it just keeps showing this screen. How can I fix this?
    Thanks in advance!

    Reboot your laptop while holding the alt/option key then I prefer you connect your laptop to an Ethernet cable because wifi gets slow . We'll, now choose the recovery driver. After that choose reinstall whatever software and just wait for a few hours for the thing to install and then your basically done hopefully no files will be earased since that is what I did and everything was perfectly fine no files lost, nothing
    Good luck

  • MacBook Spring 2010 Snow Leopard won't work with External Samsung Monitor

    Hi,
    I have a MacBook I purchased about a month ago and it's not working with my Samsung SyncMaster 940 BW. I am using Mini DisplayPort out with a Mini DisplayPort-to-VGA adaptor which goes into my SyncMaster Monitor. I have tried rebooting, and also playing around with my laptop resolution, but otherwise I have no idea what to do about this.
    I've read on the discussions that this is a known Snow-Leopard issue but I thought I might post to see if this has been resolved. I run all the updates but the monitor still isn't working?

    A better place to post would be in the The MacBook Pro Display (2008 and Later) forum:
    http://discussions.apple.com/forum.jspa?forumID=1294

  • MacBook Air (Early 2014) Camera won't work with Webex

    Hi,
    I just bought an 13" MacBook Air but unfortunately the built-in camera doesn't work with WebEx. It works on my iMac hat home though (late 2013 model). I've seen some of the discussions here but didn't find a solution yet. Can anybody help and point me in the right direction here?
    Thank you!

    I don't use WebEx, but one of these ideas may help you get things working:
    tombirdy wrote: ... camera doesn't work with WebEx. It works on my iMac hat home though (late 2013 model)....
    Are you using WBS 29.10 or newer with your "MacBook Air, OS X Yosemite (10.10.2)"?
    WebEx min sys requirements here: https://support.webex.com/MyAccountWeb/knowledgeBase.do?articleId=WBX4830
    If your camera works with Apple software (your problem is ONLY with WebEx), click here to sign in to contact WebEx support. 
    WebEx will be best able to help you use THEIR product with your Apple Mac System or tell you if it is not currently compatible.
    Message was edited by: EZ Jim
    Mac OSX 10.10.2

  • Officejet Pro L7580 connected to home network won't work after working for several years

    My Officejet Pro L7580 would not scan today.  This happens all the time, but today rebooting, uninstalling, and reinstalling did not work.  I finally got it to work by disconnecting it from my local network and using the usb cable.  I am running windows 7 (64bit).  When i ran the scan diagnostic program, it could not connect to my computer, but the home network diagnostic says everything is ok.  The message I get when i try to scan a document is this: "The scan cannot be performed because another program or computer is using the networked HP imaging device. Try again later."

    Hi Anti-Phish,
    Thank you for your reply, and you as well Captain.  I did very carefully follow the process outlined in that post and I've actually gone through it several times to make sure I didn't goof up or miss a step - but no luck.
    Everytime I connect the coax on the secondary router, the primary router DHCP connection to verizon disconnects and never re-establishes itself.  Although, everything else on the internal network side seems to be working like a champ!
    I'm beginning to wonder if the intructions are applicable to the software on my router.  The procedure refers to a connection labeled "Broadband Coax" but my software refers to it as "Broadband Connection (Ethernet/Coax)".  Eitherway, I still disabled it and the PPPoE connection.
    If you've got some ideas and want to be a second set of eyes, I would be happy to share some screen shots of my primary and secondary routers.
    Here is the screenshot of my primary router "Network Connections" screen - the secondary router looks identical - in terms of the labels it uses, but keep in mind that after I complete the process on it - the status for the Broadband entry and the PPPoE entry read "Disabled".
    -Robert
    FIGURE 1: Screenshot from my Primary Router (for reference to the differences in the use of descriptions on the connections)

  • HT3964 On my macbook pro my keyboard backlight won't work but it use to. I think i pressed something in the settings? please help me!

    The backlight on my macbook pro isnt working but it use to work before by using the F5 and F6 keys. I think i pressed something in the settings to change this. please help me!

    If you are in a well lit area this will pop up on the screen. 

Maybe you are looking for