Macbook Constantly Loses Internet, but not Wireless Signal

I have a black 2008 Macbook (don't have the full specs on me since I'm on my work computer) and it constantly loses internet connection (i.e. I can no longer visit websites), however Airport continues to show full signal strength to my wireless network. I think it may be a DNS issue. Is it possible for the Airport card to go bad? Has anyone else had these issues?
FWIW, I'm using AT&T U-Verse for my internet connection. I think the issue is specific to my computer. My two roommates also have macs, and they have no problems with the internet dropping.
Any help is greatly appreciated. Thanks!

No idea if I'm honest. I used a landline phone on the same line as the broadband. When i used the phone, i could hear it crackling.Once they had done whatever they did, that crackling disappeared.

Similar Messages

  • I have a MacBook Pro and all of a sudden  I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning

    I  have a MacBook Pro and all of a sudden  I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning

    BXB1905 wrote:
    I tried the Apple diagnostics it did not work.
    What do you mean it did not work!  What were the results of the diagnostic tests?
    Have you contacted your ISP to determine if the problem is on their end?  
    Have you changed your router channel?  Sometimes this resolves wireless problems.
    Your profile confirms you are using Lion.  Check out the following: 
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    Configuring 802.1X in Mac OS X Lion and Later

  • I have a net gear wireless router and a APE working great inside the house, but the wireless signal is weak in the backyard, can I get a net gear extender for the back and it will also send my music to the airport express?

    I have a net gear wireless router and a APE working great inside the house, but the wireless signal is weak in the backyard, can I get a net gear extender for the back yard and it will boost our wo
    Ireless signal and also send my music to the airport express? Or does the airport express work as a stand alone hub?

    Trust me when I say this coming from 20 years of experience.
    Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
    Download and install Carbon Copy Cloner, clone internal drive to external drive.
    Set a schedule to remind you to do it at least once a week, keep it near your charger.
    When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
    CCC will do the rest.
    If you want to boot from it, hold the option/alt and select it Startup Manager.
    I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
    It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
    Make as many clones as you want, keep them time seperated, off site etc. etc.
    Cables don't have network issues, clones can be verified in seconds merely by booting from them.
    Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
    Software problem? No sweat, boot of the clone and reverse clone your problems away.
    If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
    I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
    Most commonly used backup methods

  • Is it possible to connect an iMac to the internet but not to the network?

    Hello,
    I volunteered to purchase an iMac for our company. This huge company maintains a huge windows-only network environment and IT does not support any macs (nor do they want to have them on the network).
    Hence, since we really need this machine to be a mac and not a PC I had to promise to set it up as a stand-alone machine and to get anti-virus protection (as users will be coming in with their jump drives etc). At least for the latter reason (regular updates of virus definitions must be possible) we'd like to have it connected to the internet.
    How would I escape the dilemma that as soon as I'd hook it up via ethernet, it would of course get internet but at the same time would see all other machines on the network? (it will sure do so as I had tried it out with some other machine running on the same OS)
    Is there a way to configure Snow Leopard to allow for internet but not network access?
    Does it make sense at all (for security reasons that is)?
    thank you very much,
    HD

    Is there a way to configure Snow Leopard to allow for internet but not network access?
    Well, 'internet' is 'network access' so at one level your question makes no sense.
    If, on the other hand, what you want to do is segregate your Mac from the other machines then that's a different issue. There are numerous ways of doing that, but most would involve some level of interaction with the network administrators. Given their ana^H^H^H attitude towards Macs that may be an issue.
    The best way would be to setup a separate VLAN for the Mac. This will create a separate logical network within the company network with only this Mac and the network router in it. No PC would see the Mac, and the Mac wouldn't be scarred by seeing all those PCs. This cannot be done without buy-in from the network admins, though.
    A step down from that would be to use one PC in the network as a gateway to the rest of the network. The Mac would talk to this PC, and the PC would pass the data out to the rest of the network. This would require admin rights on the PC, though, which you may or may not have (I've seen a lot of corporate networks… :: shudder ::)
    The last option would be to setup an entirely separate internet connection for the Mac but there are logistical issues there, too.
    My advice: Buy a dozen Krispy Kremes for the network guys and sweet talk them into building you a VLAN.

  • My MacBook Pro turns on but not all the way, it gives me an icon of a grey folder with a question mark in the middle, and won't go further that that. Anyone knows why, or what's the problem?

    My MacBook Pro turns on but not all the way, it gives me an icon of a grey folder with a question mark in the middle, and won't go further that that. Anyone knows why, or what's the problem?

    If these do not resolve the issue or if you are not comfortable with proceeding through these steps then take your Mac to an Apple store or an Apple Authorized Service Provider.  An Apple store will perform these initial steps, diagnose the problem, and give an estimate for repairs (if needed).  If the Mac is less than one year old or is covered by AppleCare any repairs would be free.
              Genius reservation http://www.apple.com/retail/geniusbar/ .
              or find an Apple Authorized Service Provider https://locate.apple.com/country

  • I can connect my lexmark printer by usb but not wireless

    i can connect my lexmark printer s400 series by usb but not wirelessly any thoughts please

    I'm having the same issue. On my MBP 15" OS 10.7.3 the Lexmark printer does not connect to WIFI. It works on the USB connection. In wifi however it will work on the Virtual Box Windows 7 partition.
    In my logic this means the printer is properly connected to the wifi (green indicator and working with Virtual Box and Windows 7) The MBP is properly connected to the wifi network as Virtual Box works in the Mac's environment. The printer is present in the System Preferences indicating it is Idle and does have a IP address.
    When I do send a document to the printer it just sits in the Que and in System Preferences the status goes to Busy. In the Que it also indicates it is busy until it tmes out and indicate that communication with the printer is a problem.
    Thanks for any suggestions.

  • Downloads - I want to open some PDFs/other file types from the internet but not have to save them; I can't figure out how to view them and close them without having to save them first.

    Downloads - I want to open some PDFs/other file types from the internet but not have to save them. I can't figure out how to view them and close them without having to save them first. When I click on a file, the downloads box opens and depending on the setting, it auto saves the file or asks me where to save the file. What if I don't want to save it anywhere, I just want to view it and close it?

    https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox
    https://support.mozilla.com/en-US/kb/Opening+PDF+files+within+Firefox

  • Bad video quality on Atom over Internet, but not o...

    I have an Asus netbook with a 1.66GHz Atom, 1GB DDR3, and XP.  The video quality when in a call over the Internet is almost always bad, and Skype complains the computer is "slow".  There is no virus scanner or any other garbage running that sucks up resources.  I keep it lean.
    So I tried using a different computer to make the call; an 8 year old Sempron laptop, also with XP and 2.2GHz or close to that.  Video quality is great.  So it's obviously a computer performance issue, right? 
    It gets stranger.  I set up a video call between these two computers over my LAN (i.e. within the same house).  Video quality is great on both. 
    The results have been similar over a span of a year or more, calling people in different parts of the country, and even dropping Wifi and using a cable.  
    So what causes Skype to think the computer is slow when video calling over the Internet, but not when calling another computer on the same LAN?  I have a theory, but I'll hold that thought for right now.

    I have been using iChat exclusively over WiFi (Airport Extreme) from my iMac, and via Ethernet and WiFi from my Powerbook. I have not had any quality issues when connecting in this manner. Connections within my local network from WiFi to WiFi, as well as to outside connections over Broadband have all been of very good quality. Now if I can just get it all working again following the upgrade to Leopard 10.5.1.
    FYI: I have even used iChat AV on Tiger using DUN on my Treo650 (Sprint), which worked fine as well.

  • Airport express connects to internet, but not print server

    hello all. i hope someone can help me with this. 2 days ago, my wife was able to print using her ibook/airport expess setup. today, the network diagnostics has this message: "network diagnostics was able to connect to the internet but not to the server EPSON Stylus CX3800.pdldatastream.tcp.local. this could be caused by problems with the server, or an internet problem between this computer and the server." she says this happened when she turned it on. what could be causing this? any and all help welcome. mcrat

    You can reset the AirPort Express (AX) following the directions in Resetting an AirPort Base Station or Time Capsule FAQ.
    Then you can use AirPort Utility on your computer to configure the AX.

  • A DVD (mpg file only) comes up on my MacBook and Dell PC but not my iMac.  Aren't all Macs alike?

    A DVD (mpg file only) comes up on my MacBook and Dell PC but not my iMac.  Aren't all Macs alike?  I was told by a couple of experts to copy the file on my MacBook and then send it to my iMac.  But shouldn't my iMac show it now if my little Mac does?

    Zap the PRAM and Reset the SMC, then pop in the DVD again.

  • Hi i use the hp lap in connecting for internet but not open the bro

    hi 
      i have some problam in my laptop in connecting for internet but not open for broswer and not update for software  tell the solution

    Hi @jerry3 ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Notebook and not getting to the Internet. First try just to reset the router. Unplug from the power wait a few moments and plug back in.
    Can get to safe mode with command prompt? F11 upon startup choose safe mode with Networking.
    Can you get to the Internet in safe mode?
    Please note remove any and all USB devices, and remove memory cards from the card reader slot. Disconnect all non-essential devices.
    You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
    I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
    Please let me know.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • My macbook turns off randomly but not completely because when I tap the touchpad it goes to the password screen and I am back to it in seconds. It's really annoying. HELP!!!

    My macbook turns off randomly but not completely because when I tap the touchpad it goes to the password screen and I am back to it in seconds. It's really annoying. HELP!!!

    1. Non volatile random access memory (NVRAM) is where the computer stores user's settings, like time and date, speaker volume, energy saver settings etc.
    2. Reseting NVRAM has no impact on anything on your hard drive, or anything else on the computer.
    See this note from Apple: http://support.apple.com/kb/ht1379

  • TS1492 I can connect to the internet but not to itunes

    itunes error 11333, I can connect to the internet but not to itunes Store. Apple Support, mention update to itunes 7.5 will solve the problem, but if check for itunes updates in my system, it says that the system is pu to date

    I won't give you a lecture about how poor WEP encryption is, but are you sure that is the problem? Is it possible that your new modem (or the carrier behind it) is not providing DHCP service?

  • Why is my Internet connection hanging on both MacBook and Mac mini, but not PCs, Xbox, or iOS devices?

    I have a MacBook pro and Mac mini both running the latest version of lion.  I've had this issue with my MacBook for sometime now, but just dealt with it and figured it was isolated, but now I am finding its not.
    Essentially, I will open up safari, or Chrome, and the first few pages will load fine.  Sometimes I will get lucky and be able to browse normally, but after awhile, safari just hangs there and stops loading.  I can close the window, and open a few more pages before it does it again.  Both my mini and MacBook do this, but only on my home network.  My MacBook runs perfectly fine on my work wi if, and other wi fis, so I definitely know its my home modem.  If I wait it out I can surf the Internet again, but this dead time is absolutely killing me. It just randomly stalls, on both computers.
    I current have time Warner cable roadrunner, with a cable modem gateway.  The issue was happening on a straight connection.  I had hoped getting a time capsule and connecting to that network would solve things, but it didn't.  Interestingly enough, my Pcs, Xbox,and all 4 of my iPads and iPhones work just fine on the wifi, so there has to be a communication issues with the MacBook and mini with the cable router.
    I've tried messing with lions network DNS servers and tried opendns ones, but those didn't work.  Sometimes I can fix the problem for a few hours by power cycling the modem and router, but I shouldn't  have to do that over and over every time it's an issue.  I've also tried removing and adding the wi if connections, but that.works for a minute or two and then the problem resumes.
    Now, I have my time capsule connected to the gateway, and tuned the time Warner modem wireless off, which didn't help of course, but at least I'm properly backed up.
    I'm not sure what the issue is.  I've even tried typing an ip address of apple during a dead time to see if that worked and didn't.
    Does anyone have any other ideas?  I'm pretty much at my wits end in this, any ideas would be greatly appreciated

    Have you tried a simple reset of your iPod to see if that helps?  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    Otherwise, have you tried any of the troubleshooting mentioned in this Apple support document?
    iOS: Troubleshooting Wi-Fi networks and connections
    B-rock

  • Airport connected to internet but not putting out wireless

    Hey there,
    Have a G5 connected directly to an airport extreme that is connected to the internet just fine. Not the new generation airport extreme.
    My POWERBOOK G4 is not showing a wireless signal at all and usually does. I checked the powerbooks system preferences, network, airport status and it says, "Airport is connected to the network. Airport has a self assigned IP address and may not able to connect to the internet." The airport is connected to the airport because my G5 is directly connected through it.
    This set up has worked before but I'm not sure when it stopped because I haven't been using my powerbook for some time.
    Both computers are running OS 10.3.9 Both can connect to the internet directly through the airport. All the setting are set in the airport set up.
    Anyone have any idea how to get this wireless set up back up and running ?
    thanks,
    tnixer

    Okay, looking at the Airport Admin Utility.
    INternet> configured manually (won't work automatic)
    Network> Distribute IP address is checked.
    And Share a single address is checked. Use 10.0.1.1 adressing is selected
    IF I uncheck "Distribute IP address" then Airport can't connect to the internet.
    I can't get Share A Range of IP address to even take the number I type in.
    The thing of all this is it used to work.
    One thing that happened is I tried a different internet provider, didn't like, changed back to my usual service. Maybe that is when this started because like I said I haven't tried using my powerbook for a while so I'm not sure.
    In any case it seems like its just a matter of settings since this set up has worked for years.
    Maybe sharing my settings with give some clues ?
    thanks,
    tnixer

Maybe you are looking for

  • G50-30 Intel USB 3.0 driver Windows 8.1 64bit

    Hello everyone, I have just re-installed (after formatting) win 8.1 64bit on my lenovo G50-30. After downloading every driver from support.lenovo.com, I noticed that there are no USB drivers available for Win 8.1. The only driver I found on the websi

  • LR 5.2 and macBook, air or pro?

    Hi, I am considering buying a macBook to use for images using LR, some video too (don't know which software I will use yet). Is macBook Air good enough or should I go for the macBook Pro? I am looking at the 13" models, but I also have an eye for the

  • Passing data through TCP/IP

    Hello ! My challenge is this: I have a vi that i have to use as a server and a vi as a client. In the server vi, i want to modify multiple parameters of one graph and these modifications should reflect on the client vi. How can i transmit, through TC

  • How do I convert all RGB images to CMYK for PACKAGING - InDesign CC?

    I understand that they can be exported as a CMYK pdf - but I'm splitting a project with another designer and she needs to get me all of her files - many of which are RGB - need them CMYK.  Thanks!

  • Transition logical to physical failover

    Can you change a logical failover to a physical failover using dataguard. I'm running Oracle 10.1.0.4 on Windows thanks.