Macbook create network not working

Hi
Every time I try to Create Network from my Wifi dropdown menu, I get a "Connection Failed" error message. My laptop is connected via a Huauwei Modem. I've set up Internet Sharing correctly in Sharing (tick Internet Sharing box- Share your connection from: HUAWEIMobile Modem- To computers using WiFi). But when I try and start the connection nothing happens.
Any suggestions? Much appreciated!

Hi
Every time I try to Create Network from my Wifi dropdown menu, I get a "Connection Failed" error message. My laptop is connected via a Huauwei Modem. I've set up Internet Sharing correctly in Sharing (tick Internet Sharing box- Share your connection from: HUAWEIMobile Modem- To computers using WiFi). But when I try and start the connection nothing happens.
Any suggestions? Much appreciated!

Similar Messages

  • Create Network Not Working

    I have created a network on my mac which my ipod touch has successfully connected to. When I try to use Remote and 1Password, my mac will detect the ipod but in the case of remote, when I enter the code my ipod displays it just verifies for ages in itunes then stops. What is wrong?
    Thanks for your time,
    Declan

    Howdy infernalcolonel,
    It would be helpful if you gave a bit more info about the symptoms other than "it never works".
    It sounds like you might be trying to create the ad-hoc wireless network from the Airport menu item and then trying to turn internet sharing on. In fact the Airport settings for this type of sharing are set up via the "Airport Options" button that is on the Internet Sharing pane.
    Check that your Airport menu icon changes to a grey segment with an upward pointing arrow, and also click on it to verify the name of the network it has created.
    I'd suggest that for first attempts you create your wireless network without a password and once you can successfully connect to that, implement a password.
    If you've still got problems post a message back here with some more info about what exactly you're observing and doing.

  • MacBook Air wifi internet shared network not working on tethered android phone GT B5122

    MacBook Air wifi internet shared network not working on tethered android phone GT B5122
    I have created a password protected wifi internet network on my Macbook air. I tethered by Andriod phone onto this network, but the internet connection works intermittently on the phone, and when it stops working the network continues to show as connected to the shared network mostly(other times it keeps renewing the wifi IP address on the Andriod phone).
    Also the network the MBA is connected to, is a hardwired one using a SSH login account in a student accomadations.
    I am not sure, but all the restarting and refreshing of system, phone and wifi sharing and re-enabling wifi is not reparing the internet connecting on the wifi network for the phone
    Really puzzled, if this is one of the Apple, Andriod compatability issues.
    Cheers,
    Vivek

    Spanners91 wrote:
    Hi.
    I'm having trouble with the wireless connection on my new home hub 3. Most devices will connect easily, but there are three devices that have trouble connecting. These are an Android Phone (Samsung Galaxy Mini), an android tablet (Sony Tablet S) and an iPod. All of these devices work perfectly on other network connections, and other devices in the house are quite happy connecting to the network.
    The Androids can see the network, and will try to connect to it, but when they do they just go through a loop of "connecting">>"acquiring IP address">>"disconnected". I have tried resetting the Home Hub with a pin, and that lets the devices connect for about 24 hours, but after that time they stop connecting again.
    I'm really not sure what to do to fix the problem, so I will very much appreciate some help.
    Many Thanks.
    My lads SGMini connects perfectly to our hub3
    Have you installed the BTFon app to these devices?
    If so, you could delete it and then see what hapens.....
    -+-No longer a forum member-+-

  • IMessage (Macbook pro) suddenly not working!?

    My imessage from my macbook pro is not working! When I send a message, it automatically displays a red exclamation point and the name of the person I am sending it to turns red. When I click on that it tells me that their number is not registered with imessage! I've sent imessages before (today even) and I don't know what happened. I think I may have messed with some preferences because I was trying to change security preferences, but maybe I accidentally clicked something I shouldn't have? I know it is me because I get the same error for every person I try to message. It works from my phone, though.

    This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
    Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
    Step 1
    Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
    Step 2
    Sign out of iMessage on all your Apple devices. Log out and log back in. Try again to sign in.
    Step 3
    Restart your broadband device and your router, if different. You may have to skip this step if you don't control those devices.
    Step 4
    From the menu bar, select
     ▹ About This Mac
    Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
    Step 5
    Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
    Step 6
    From the menu bar, select
     ▹ System Preferences ▹ Network
    If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
    The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
    Step 7
    Select from the menu bar
     ▹ System Preferences… ▹ Flash Player ▹ Storage
    and click
    Block all sites from storing information on this computer
    Close the preference pane.
    Step 8
    Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" in the name. Log out and log back in.
    Step 9
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    If iMessage worked in the guest account, stop here and post your results.
    Step 10
    Boot in safe mode and log in. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. After testing, reboot as usual (i.e., not in safe mode) and test again.
    If iMessage worked in safe mode, but didn't work when you booted out of safe mode, stop here and post your results.
    Step 11
    Reset the NVRAM.
    Step 12
    Reinstall OS X.
    Step 13
    If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

  • ICloud sync with MacBook Pro does not work

    I've installed iOS 5, updated Lion to 10.7.2, marked Calendar and Contacts sync in System settings for iCloud on my Mac. However iCal and Address Book sync between iCloud and Mac (MacBook Pro) does not work though there is no problem in syncing between iCloud and iPhone. Whether I create new event or contact, change existing one or delete existing one in iCloud this change is not reflected on my Mac and vise versa. I could not find a solution in this site or in forums.

    Yep, worked for me, too and now contacts and calendar seem to be syncing perfectly.  We'll see if it lasts.
    Thanks for your answer.

  • Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Please take the Mac to  Apple store to have it checked out.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
    Best.

  • The sound on my macbook pro is not working

    The sound on my macbook pro is not working. When I increase the sound, the icon appears as if everything is working, but no sound comes from the speakers. Earphones don't work either. I have tried a PRAM reset but at times, this doesn't even work. It's really frustrating having to restart my computer every time I want the sound to work, and even when I do that, theres a 50 50 chance of it working again. It generally happens after my laptop goes to sleep and I wake it up. Has anyone else had this problem and fixed it or even know what caused it?
    There are a lot of discussions around the earphone jack but I have checked that. I've tried a PRAM reset which hasn't worked, and my sound output is set to Internal speakers.
    HELP!!

    Hopefully one of these steps should solve the problem.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers / Headphones
        Make sure Mute is not enabled.
    2. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    4. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

  • My iMessage for my Macbook Air is not working. It says no delivered with a red ! next to it. I have tried serval different options on trying to get it to work to include logging out of iCloud and checking my date and time. I have done about everythin

    My iMessage for my Macbook Air is not working. I have updated everything. My system is running on OS X Yosemite Version 10.10. When I go to send a message, it says no delivered with a next to it. I have tried serval different options on trying to get it to work to include logging out of iCloud and checking my date and time and updating FlashPlayer. I have done about everything I can think of. Any help would be greatly appreciate!

    Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
    I suggest that no response is made to this duplicate thread. 

  • Macbook pro sound not working

    It seems that the sound on my macbook pro does not work when watching videos such as those on youtube. Please help.

    Here is YouTube's help page if you have no sound on YouTube videos:
    http://support.google.com/youtube/bin/answer.py?hl=en&answer=58132
    Try re-installing Flash player.  I'm assuming at this stage that all your other audio works fine, e.g. CDs, DVDs, system sounds, etc...

  • The "A" key on my macbook pro is not working Can I fix it myself?

    The "A" key on my macbook pro will not work.  How can I fix it?
          -----Earnie---------

    Don't use any cleaning spray. Wipe with a moist but not wet microfiber cloth.
    1. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own"
    2.Reset PRAM. http://support.apple.com/kb/PH4405

  • Output volume on my MacBook Pro is not working

    My output volume on my MacBook Pro is not working. When I go to "Settings", then "Sounds", then "Output", I can not slide the volume bar at all, or change it in the menu bar?

    See if a PRAM reset will solve the problem;
    http://support.apple.com/kb/HT1895
    Ciao.

  • Please can someone help,my in built camera on my Macbook Pro is not working what can i do to activate it back.

    Please can somone help my in built cameral on my MacBook Pro is not working, the green light does not show again and the camera is not working . what can i do to active it back.
    Semako

    Yuu can try to reactivate your iSight camera by opening up iMessage.. navigate to Preferences/Audio Video,and then click on Camera. IT shoudl be grayed-out if you only have one camera hooked up to your machine. If you have an external camera, then disconnect it from your machine. 

  • My charger for my MacBook Pro is not working

    The charger cord for my MacBook Pro is not working. This happened before but I do not remember what the tech guy had me do. It was a simple fix....

    If the SMC reset does not work check for contamination or stuck pins:
    Troubleshooting MagSafe adapters
    http://support.apple.com/kb/TS1713

  • One of the key on my macbook pro is not working properly, can it be fixed by a cleaning spray or something. there is lot of dust in where I live and thought that might be the culprit. thanks Jason

    one of the key on my macbook pro is not working properly, can it be fixed by a cleaning spray or something. there is lot of dust in where I live and thought that might be the culprit. thanks Jason

    Don't use any cleaning spray. Wipe with a moist but not wet microfiber cloth.
    1. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own"
    2.Reset PRAM. http://support.apple.com/kb/PH4405

  • My macbook pro is not working properly , when is turned on after then show apple logo and continue show this or nothing.

    my macbook pro is not working properly , when is turned on after then show apple logo and continue show this or nothing

    Gray, Blue or White screen at boot, w/spinner/progress bar

Maybe you are looking for

  • How to use a dropdown in a workbook which can work in different queries?

    Hi Experts,         I have created a workbook which can display the query by using the 'Push Button'. One query is based on material analysis and another one on product analysis.         It works good..         In that workbook, I want to use a dropd

  • IPod shuffle doesn't open in iTunes??

    Hi I have been trying to connect my iPod shuffle to iTunes but it will not recognise it on my computer??????getting frustrated any ideas please!!!!!

  • T-Tap unit out now for FCPX external monitoring

    Hello All, First off, I do not work for or own stock in Aja.  Check out this new unit called the T-Tap from Aja it connects to your Mac via Thunderbolt and is powered by your Thunderbolt connection (you don't have to hook it up to external power).  N

  • BAPI to search for customer

    dear all Iam search for a BAPI  to be used in search for particular customer using one of its attribute wich is stored  in kna1 table and also search in its details stored in ADRC taple if possible.        and also  BAPI for search for  equipment  us

  • Hierachical reports for xml output

    Hi, is there a way to get a SQL result set for the xml export with more than 1 level ? For example: SELECT dname, empno, ename FROM emp, dept WHERE emp.deptno = dept.deptno will give me the following xml when being exported: <?xml version="1.0" encod