Macbook Damaged Hard drive?
Hello,
Recently my Apple Macbook has passed the 1 year warranty mark. I have been expiriancing many problems with it such as, problems booting, Grey screen saying I need to shut down Macbook, and Just today, I was trying to install Mac OS X Lion, on my hard drive. I succesfully purchased and downloaded lion installer, but when i tried to write it to my hard drive, i recieve a screen saying My Hard drive is damaged and cannot be repaired...
Although, i am very confused because i was able to run Mac OS X Snow leopard 10.6.8 and Mac os X lion Beta (developers version) on my mac. I went into disk utility and tried to repair the disk but it did not work. I am un-sure of what to do because, i do not have an Applecare protection plan nor can i afford one at the moment. Apple has denied to speak with me about the problem and the nearest Apple repair store is too far to go just any day.
Can somebody help me or give me some suggestions please?
TasTrosa wrote:
1) What sort of enclosure do I need to externally house my original MacBook Pro hard drive; and
Ant 2.5" SATA enclosure will do. Here are representative samples:
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100008040 600006255 600006269&IsNodeId=1&name=SATA
In regard to data recovery, follow Niel's advice.
Ciao.
Similar Messages
-
Lost iPhoto when Apple replaced damaged MacBook Pro hard drive
My son and daughter-in-law recently had to replace their MacBook Pro hard drive. Apple did the replacement, but they got it back without iPhoto. Isn't that standard software when you purchase a MacBook Pro? Shouldn't it be part of the replacement, too?
If your computer shipped with Lion, follow the directions here to redownload the iLife apps:
Restoring iLife applications after Internet Restore of OS X Lion or OS X Mountain Lion
If you erase install OS X Lion or OS X Mountain Lion on a new Mac that shipped with OS X Lion or OS X Mountain Lion installed, you can download iPhoto, iMovie, and GarageBand from the Mac App Store.
After installation, start (up) from OS X.
Double-click the App Store icon in the dock.
Enter your Apple ID and password.
Click Purchases.
If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to complete installation of your applications. -
Need help saving iPhoto library from damaged hard drive
Trying to help my wife, she has the following:
MacBook Pro running OS X Lion version 10.7.3
iPhoto 11 version 9.2.2
Her hard drive failed last week and she had a ton of photos on it, of course not backed up.
We took her machine to the local Apple Store, they confirmed they couldn't recover the data and they installed a new hard drive in the MacBook. We took the old hard drive to my local PC supplier who's very clever, he worked on the hard drive and was able to copy all my wife's documents to another storage device.....but, he couldn't copy the iPhoto library and is requesting some help.....he doesn't know much about Macs, nor how iPhoto works.
I've read a lot of the posts on this forum and am learning about how the iPhoto library works....and how it requires a Mac based back up hard drive in order to copy it. Okay, here are my questions:
1. My PC troubleshooting guy can see the iPhoto library icon on the damaged hard drive, he says its a huge file. It appears we would need to supply him with a Mac formated back up hard drive, then he could just move that iPhoto library icon (which contains all photos) to the new back up drive. Is this correct?
2. Once we have this old iPhoto library on the new back up hard drive, we could bring it home of course, but then I need to get it into the new hard drive on my wife's MacBook Pro. I'm assuming I can plug this back up drive into my wife's machine, then import the old library into her machine. How do I do this properly?
3. If I bring the old library into the new MacBook Pro hard drive, will it erase the existing iPhoto library on her new hard MacBook Pro hard drive, or will it combine them somehow? She has added of course some pics to the new iPhoto library already, but if we have to delete them it won't kill us. The old stuff that got recovered from the damaged drive is more important.
Thanks ahead.....now to the experts?Thanks Terence.....
regarding this point:
3. use the paid version ($20) of iPhoto Library Manager to merge the Libraries. that way you won't lose anything.
I have another access to her new photos, whereby I could reload them onto her MacBook if we lose the new library.....so I'll save the $20 and just reload them.....two more questions:
1. So, if I drag the iPhoto library folder from the new back up hard drive to the Pictures Folder in Finder, will that overwrite the existing library folder on her MacBook?
2. After I drag this folder into finder, will iPhoto recognize everything? I assume yes....just checking.
thanks ahead! -
My new Macbook Air hard drive gone bad
My new macbook air hard drive just died on me last saturday while I was working on my paper. With that I've lost all my files. I took it to Apple store, but I was told that all they can do is to replace the hard drive for me.
I'm not really happy with the service. You pay so much more to get your money's worth. I was suggested that if I wanted to retrieve my files I had to take it to an outside source for about $500-$700. It's like buying a defective device that causes you some nasty injury and when you ask for their part of responsibility they tell you to take a hike.
I wish there was a law that would be more protective of people's time and (intellectual) property as opposed to leaving us to the mercy of, ultimately, the greed that drives these companies.Dave Changizi wrote:
Fellows,
Please don't read my e-mail with your emotions. I have nothing against Apple other than my disappointment in this particular service that I received. I can make a long list of all the good things that Apple has brought in this world.
My point is this: whether Apple or a PC, when you buy a brand new computer, the manufacturer should not only replace the failed part (in my case it did, as is the norm in the industry), but TRY to retrieve the lost file(s), when is applicable, free of charge, during the warrantee period.
Does it make sense? I find this a very reasonable request/demand. Remember that, according to Apple representative, an outside source was potentially able to retrieve my files.
As a customer, I want to have a better service, especially when I pay more for the promised quality.
If we customers were happy with what is offered/or not, then we would have still worked 70 hours per week, our cars didn't a seatbelt, and ...
I hope this helps to clear my argument.
Cheers,
I understand where you are coming from, however, there is nothing that they can do. If the drive has been damaged and does not work, then there isn't anything that they can do. When those other places charge the prices that they do, it's to pay for them having to physically remove the platters from the drive that you currently had, and keeping every tiny spec of dust off them as a spec of dust could render the platter useless if it gets caught between the heads and the platters. This being said, they would then have to take those platters and place them in a new drive basically. Most people understand that there is nothing that can be done when something like this happens, they have external drives and they backup all their data. I have mine backed up on two seperate drives and in a remote location away from everything here. Let's put it like this, say you bought a house, and then you put a lot of your memories and things and whatnot into your house, say pictures, papers, things like that. Now your house burns down, would you expect the people that built your house be responsible and demand that they somehow get your pictures and things like that back from your house that were burned up? It's kind of asking the same thing that you would get if you were to demand that they somehow magically make your drive start working and get the information off it. -
I'm wondering if someone can help me take a look at the console messages to see if my MacBook Air hard drive is possibly failing.
I had shut down my computer and the shut down process went just fine. A few minutes later when I turned on the computer again, the Apple logo showed up with the spinning disc/sun ray but it never got to the login window.
I hooked up the SuperDrive to repair disk permissions and repair disk. Indeed, it needed disk repairs and permissions to be repaired. It seems to be running fine now.
When I opened the Console, it says something about disk I/O error for some of the log entries.
See below:
{quote}
2010/03/31 3:56:11 PM com.apple.launchd[1] * launchd[1] has started up. *
2010/03/31 3:56:23 PM kernel systemShutdown false
2010/03/31 3:56:23 PM blued[16] Apple Bluetooth daemon started
2010/03/31 3:56:24 PM mDNSResponder[18] mDNSResponder mDNSResponder-214.3 (Feb 11 2010 04:49:16) starting
2010/03/31 3:56:25 PM com.apple.SecurityServer[28] Session 0x5fbff962 created
2010/03/31 3:56:25 PM com.apple.SecurityServer[28] Entering service
2010/03/31 3:56:26 PM configd[14] network configuration changed.
2010/03/31 3:56:26 PM configd[14] setting hostname to "SanghAir.local"
2010/03/31 3:56:28 PM configd[14] network configuration changed.
2010/03/31 3:56:30 PM configd[14] network configuration changed.
2010/03/31 3:56:32 PM kernel Previous Shutdown Cause: 5
2010/03/31 3:56:39 PM kernel disk0s2: I/O error.
2010/03/31 3:56:39 PM kernel
2010/03/31 3:56:39 PM kernel
2010/03/31 3:56:47 PM kernel disk0s2: I/O error.
2010/03/31 3:56:47 PM kernel
2010/03/31 3:56:47 PM kernel
2010/03/31 3:56:47 PM com.apple.dynamic_pager[48] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 3:56:47 PM com.apple.launchd[1] (com.apple.dynamic_pager[48]) Exited with exit code: 1
2010/03/31 3:56:47 PM bootlog[53] BOOT_TIME: 1270076170 0
2010/03/31 3:56:54 PM kernel disk0s2: I/O error.
2010/03/31 3:56:54 PM kernel
2010/03/31 3:56:54 PM kernel
2010/03/31 3:56:55 PM kernel Waiting for DSMOS...
2010/03/31 3:57:02 PM com.apple.dynamic_pager[62] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 3:57:02 PM com.apple.launchd[1] (com.apple.dynamic_pager[62]) Exited with exit code: 1
2010/03/31 3:57:03 PM kernel disk0s2: I/O error.
2010/03/31 3:57:03 PM kernel
2010/03/31 3:57:03 PM kernel
2010/03/31 3:57:10 PM kernel disk0s2: I/O error.
2010/03/31 3:57:10 PM kernel
2010/03/31 3:57:10 PM kernel
2010/03/31 3:57:17 PM kernel disk0s2: I/O error.
2010/03/31 3:57:17 PM kernel
2010/03/31 3:57:17 PM kernel
2010/03/31 3:57:17 PM com.apple.dynamic_pager[67] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 3:57:17 PM com.apple.launchd[1] (com.apple.dynamic_pager[67]) Exited with exit code: 1
2010/03/31 3:57:19 PM kernel BTCOEXIST on
2010/03/31 3:57:19 PM kernel wl0: Broadcom BCM4328 802.11 Wireless Controller
2010/03/31 3:57:19 PM kernel 5.10.91.27
2010/03/31 3:57:25 PM kernel disk0s2: I/O error.
2010/03/31 3:57:25 PM kernel
2010/03/31 3:57:25 PM kernel
2010/03/31 3:57:33 PM kernel disk0s2: I/O error.
2010/03/31 3:57:33 PM com.apple.dynamic_pager[71] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 3:57:33 PM com.apple.launchd[1] (com.apple.dynamic_pager[71]) Exited with exit code: 1
2010/03/31 3:57:33 PM kernel
2010/03/31 3:57:33 PM kernel
2010/03/31 3:57:40 PM kernel disk0s2: I/O error.
2010/03/31 3:57:40 PM kernel
2010/03/31 3:57:40 PM kernel
2010/03/31 3:57:47 PM kernel disk0s2: I/O error.
2010/03/31 3:57:47 PM com.apple.dynamic_pager[73] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 3:57:47 PM com.apple.launchd[1] (com.apple.dynamic_pager[73]) Exited with exit code: 1
2010/03/31 3:57:47 PM kernel
2010/03/31 3:57:48 PM kernel
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: timed out waiting for IOKit to quiesce
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: Busy services :
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1 [2]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert [5]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/CPU0@0 [1]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/CPU0@0/AppleACPICPU [1]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/CPU1@1 [1]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/CPU1@1/AppleACPICPU [1]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PNLF [1]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0 [1]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI [5]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/MCHC@0 [2]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/GFX0@2 [1]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/HDEF@1B [1]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/HDEF@1B/AppleHDAControl ler@1B [1]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/HDEF@1B/AppleHDAControl ler@1B/IOHDACodecDevice@1B,0 [1]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/HDEF@1B/AppleHDAControl ler@1B/IOHDACodecDevice@1B,0/IOHDACodecDriver [1]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/HDEF@1B/AppleHDAControl ler@1B/IOHDACodecDevice@1B,0/IOHDACodecDriver/IOHDACodecFunction@1B,0,1 [1]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/EHC1@1D,7 [1]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/EHC1@1D,7/AppleUSBEHCI [1]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/EHC1@1D,7/AppleUSBEHCI/ Apple USB Ethernet Adapter@fd130000 [1]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/display@2,1 [1]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/display@2,1/IONDRVFrame buffer [1]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/SMS0 [1]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: MacBookAir1,1/IOResources [1]
2010/03/31 3:57:48 PM configd[14] InterfaceNamer: No network stack object
2010/03/31 3:57:55 PM kernel disk0s2: I/O error.
2010/03/31 3:57:55 PM kernel
2010/03/31 3:57:55 PM kernel
2010/03/31 3:58:03 PM kernel disk0s2: I/O error.
2010/03/31 3:58:03 PM kernel
2010/03/31 3:58:03 PM kernel
2010/03/31 3:58:03 PM com.apple.dynamic_pager[74] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 3:58:03 PM com.apple.launchd[1] (com.apple.dynamic_pager[74]) Exited with exit code: 1
2010/03/31 3:58:03 PM _mdnsresponder[75] /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
2010/03/31 3:58:11 PM kernel disk0s2: I/O error.
2010/03/31 3:58:11 PM kernel
2010/03/31 3:58:11 PM kernel
2010/03/31 3:58:18 PM kernel disk0s2: I/O error.
2010/03/31 3:58:18 PM kernel
2010/03/31 3:58:18 PM kernel
2010/03/31 3:58:18 PM com.apple.dynamic_pager[76] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 3:58:18 PM com.apple.launchd[1] (com.apple.dynamic_pager[76]) Exited with exit code: 1
2010/03/31 3:58:27 PM kernel disk0s2: I/O error.
2010/03/31 3:58:27 PM kernel
2010/03/31 3:58:27 PM kernel
2010/03/31 3:58:34 PM kernel disk0s2: I/O error.
2010/03/31 3:58:34 PM kernel
2010/03/31 3:58:34 PM kernel
2010/03/31 3:58:34 PM com.apple.dynamic_pager[79] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 3:58:34 PM com.apple.launchd[1] (com.apple.dynamic_pager[79]) Exited with exit code: 1
2010/03/31 3:58:42 PM kernel disk0s2: I/O error.
2010/03/31 3:58:42 PM kernel
2010/03/31 3:58:42 PM kernel
2010/03/31 3:58:49 PM kernel disk0s2: I/O error.
2010/03/31 3:58:49 PM kernel
2010/03/31 3:58:49 PM kernel
2010/03/31 3:58:49 PM com.apple.dynamic_pager[81] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 3:58:49 PM com.apple.launchd[1] (com.apple.dynamic_pager[81]) Exited with exit code: 1
2010/03/31 3:58:57 PM kernel disk0s2: I/O error.
2010/03/31 3:58:57 PM kernel
2010/03/31 3:58:57 PM kernel
2010/03/31 3:59:04 PM kernel disk0s2: I/O error.
2010/03/31 3:59:04 PM kernel
2010/03/31 3:59:04 PM kernel
2010/03/31 3:59:04 PM com.apple.dynamic_pager[82] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 3:59:04 PM com.apple.launchd[1] (com.apple.dynamic_pager[82]) Exited with exit code: 1
2010/03/31 3:59:11 PM kernel disk0s2: I/O error.
2010/03/31 3:59:11 PM kernel
2010/03/31 3:59:11 PM kernel
2010/03/31 3:59:19 PM kernel disk0s2: I/O error.
2010/03/31 3:59:19 PM kernel
2010/03/31 3:59:19 PM kernel
2010/03/31 3:59:19 PM com.apple.dynamic_pager[83] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 3:59:19 PM com.apple.launchd[1] (com.apple.dynamic_pager[83]) Exited with exit code: 1
2010/03/31 3:59:26 PM kernel disk0s2: I/O error.
2010/03/31 3:59:26 PM kernel
2010/03/31 3:59:26 PM kernel
2010/03/31 3:59:26 PM com.apple.usbmuxd[34] usbmuxd-190 built for iTunesNineOne on Mar 8 2010 at 20:25:36, running 32 bit
2010/03/31 3:59:33 PM kernel disk0s2: I/O error.
2010/03/31 3:59:33 PM com.apple.dynamic_pager[84] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 3:59:33 PM com.apple.launchd[1] (com.apple.dynamic_pager[84]) Exited with exit code: 1
2010/03/31 3:59:33 PM kernel
2010/03/31 3:59:33 PM kernel
2010/03/31 3:59:34 PM _mdnsresponder[85] sntp options: a=2 v=1 e=0.100 E=5.000 P=2147483647.000
2010/03/31 3:59:34 PM _mdnsresponder[85] d=15 c=5 x=0 op=1 l=/var/run/sntp.pid f= time.apple.com
2010/03/31 3:59:34 PM _mdnsresponder[85] sntp: getaddrinfo(hostname, ntp) failed with nodename nor servname provided, or not known
2010/03/31 3:59:41 PM kernel disk0s2: I/O error.
2010/03/31 3:59:41 PM kernel
2010/03/31 3:59:41 PM kernel
2010/03/31 3:59:48 PM kernel disk0s2: I/O error.
2010/03/31 3:59:48 PM kernel
2010/03/31 3:59:48 PM kernel
2010/03/31 3:59:48 PM com.apple.dynamic_pager[86] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 3:59:48 PM com.apple.launchd[1] (com.apple.dynamic_pager[86]) Exited with exit code: 1
2010/03/31 3:59:48 PM sudo[87] root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/libexec/StartupItemContext /usr/bin/open -a /Library/Application Support/iStat Server/iStat Server Updater.app/Contents/Resources/UpdateChecker.app
2010/03/31 3:59:56 PM kernel disk0s2: I/O error.
2010/03/31 3:59:56 PM kernel
2010/03/31 3:59:56 PM kernel
2010/03/31 4:00:03 PM kernel disk0s2: I/O error.
2010/03/31 4:00:03 PM com.apple.dynamic_pager[88] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 4:00:03 PM com.apple.launchd[1] (com.apple.dynamic_pager[88]) Exited with exit code: 1
2010/03/31 4:00:03 PM kernel
2010/03/31 4:00:03 PM kernel
2010/03/31 4:00:11 PM kernel disk0s2: I/O error.
2010/03/31 4:00:11 PM kernel
2010/03/31 4:00:11 PM kernel
2010/03/31 4:00:18 PM kernel disk0s2: I/O error.
2010/03/31 4:00:18 PM kernel
2010/03/31 4:00:18 PM com.apple.dynamic_pager[89] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 4:00:18 PM com.apple.launchd[1] (com.apple.dynamic_pager[89]) Exited with exit code: 1
2010/03/31 4:00:18 PM kernel
2010/03/31 4:00:26 PM kernel disk0s2: I/O error.
2010/03/31 4:00:26 PM kernel
2010/03/31 4:00:26 PM kernel
2010/03/31 4:00:34 PM kernel disk0s2: I/O error.
2010/03/31 4:00:34 PM kernel
2010/03/31 4:00:34 PM com.apple.dynamic_pager[90] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 4:00:34 PM kernel
2010/03/31 4:00:34 PM com.apple.launchd[1] (com.apple.dynamic_pager[90]) Exited with exit code: 1
2010/03/31 4:00:41 PM kernel disk0s2: I/O error.
2010/03/31 4:00:41 PM kernel
2010/03/31 4:00:41 PM kernel
2010/03/31 4:00:48 PM kernel disk0s2: I/O error.
2010/03/31 4:00:48 PM kernel
2010/03/31 4:00:48 PM kernel
2010/03/31 4:00:48 PM com.apple.dynamic_pager[92] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 4:00:48 PM com.apple.launchd[1] (com.apple.dynamic_pager[92]) Exited with exit code: 1
2010/03/31 4:00:56 PM kernel disk0s2: I/O error.
2010/03/31 4:00:56 PM kernel
2010/03/31 4:00:56 PM kernel
2010/03/31 4:01:03 PM kernel disk0s2: I/O error.
2010/03/31 4:01:03 PM kernel
2010/03/31 4:01:03 PM com.apple.dynamic_pager[93] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 4:01:03 PM com.apple.launchd[1] (com.apple.dynamic_pager[93]) Exited with exit code: 1
2010/03/31 4:01:03 PM kernel
2010/03/31 4:01:04 PM kernel AppleUSBEthernet 0x23f7a000 init
2010/03/31 4:01:05 PM kernel AppleUSBEthernet: - Version number 2.1.0, Input buffers 64, Output buffers 64
2010/03/31 4:01:11 PM kernel disk0s2: I/O error.
2010/03/31 4:01:11 PM kernel
2010/03/31 4:01:11 PM kernel
2010/03/31 4:01:18 PM kernel disk0s2: I/O error.
2010/03/31 4:01:18 PM kernel
2010/03/31 4:01:18 PM kernel
2010/03/31 4:01:18 PM com.apple.dynamic_pager[95] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 4:01:18 PM com.apple.launchd[1] (com.apple.dynamic_pager[95]) Exited with exit code: 1
2010/03/31 4:01:25 PM kernel disk0s2: I/O error.
2010/03/31 4:01:25 PM kernel
2010/03/31 4:01:25 PM kernel
2010/03/31 4:01:33 PM kernel disk0s2: I/O error.
2010/03/31 4:01:33 PM kernel
2010/03/31 4:01:33 PM com.apple.dynamic_pager[96] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 4:01:33 PM com.apple.launchd[1] (com.apple.dynamic_pager[96]) Exited with exit code: 1
2010/03/31 4:01:40 PM kernel disk0s2: I/O error.
2010/03/31 4:01:48 PM kernel disk0s2: I/O error.
2010/03/31 4:01:48 PM com.apple.dynamic_pager[97] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 4:01:48 PM com.apple.launchd[1] (com.apple.dynamic_pager[97]) Exited with exit code: 1
2010/03/31 4:01:49 PM kernel IG: Invalid firmware max backlight setting
2010/03/31 4:01:55 PM kernel disk0s2: I/O error.
2010/03/31 4:02:02 PM kernel disk0s2: I/O error.
2010/03/31 4:02:02 PM com.apple.dynamic_pager[98] dynamic_pager: cannot extend paging file size /private/var/vm/swapfile0 to 67108864!
2010/03/31 4:02:02 PM com.apple.launchd[1] (com.apple.dynamic_pager[98]) Exited with exit code: 1
2010/03/31 4:02:10 PM kernel disk0s2: I/O error.
2010/03/31 4:02:17 PM kernel disk0s2: I/O error.
2010/03/31 4:05:08 PM kernel npvhash=4095
2010/03/31 4:05:08 PM kernel PAE enabled
2010/03/31 4:05:08 PM kernel 64 bit mode enabled
2010/03/31 4:05:08 PM kernel Darwin Kernel Version 10.3.0: Fri Feb 26 11:58:09 PST 2010; root:xnu-1504.3.12~1/RELEASE_I386
2010/03/31 4:05:08 PM kernel vmpagebootstrap: 508166 free pages and 16122 wired pages
2010/03/31 4:05:08 PM kernel standard timeslicing quantum is 10000 us
2010/03/31 4:05:08 PM kernel migtable_maxdispl = 73
2010/03/31 4:05:08 PM kernel AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
2010/03/31 4:05:08 PM kernel AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
2010/03/31 4:05:08 PM kernel calling mpopolicyinit for Quarantine
2010/03/31 4:05:08 PM kernel Security policy loaded: Quarantine policy (Quarantine)
2010/03/31 4:05:08 PM kernel calling mpopolicyinit for Sandbox
2010/03/31 4:05:08 PM kernel Security policy loaded: Seatbelt sandbox policy (Sandbox)
2010/03/31 4:05:08 PM kernel calling mpopolicyinit for TMSafetyNet
2010/03/31 4:05:08 PM kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
2010/03/31 4:05:08 PM kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
2010/03/31 4:05:08 PM kernel The Regents of the University of California. All rights reserved.
2010/03/31 4:05:08 PM kernel MAC Framework successfully initialized
2010/03/31 4:05:08 PM kernel using 10485 buffer headers and 4096 cluster IO buffer headers
2010/03/31 4:05:08 PM kernel IOAPIC: Version 0x20 Vectors 64:87
2010/03/31 4:05:08 PM kernel ACPI: System State [S0 S3 S4 S5] (S3)
2010/03/31 4:05:08 PM kernel mbinit: done (64 MB memory set for mbuf pool)
2010/03/31 4:05:08 PM kernel Intel PATA has safe-sleep
2010/03/31 4:05:08 PM kernel rooting via boot-uuid from /chosen: 97D858DD-E1B0-36BF-88C8-5FFD31631E7C
2010/03/31 4:05:08 PM kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
2010/03/31 4:05:08 PM kernel com.apple.AppleFSCompressionTypeZlib load succeeded
2010/03/31 4:05:08 PM kernel AppleIntelCPUPowerManagementClient: ready
2010/03/31 4:05:08 PM kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PATA@1F,1/AppleIntelPIIXAT ARoot/PRID@0/AppleIntelPIIXPATA/ATADeviceNub@0/AppleATADiskDriver/IOATABlockStor ageDevice/IOBlockStorageDriver/SAMSUNG HS082HB SAMSUNG HS082HB Media/IOGUIDPartitionScheme/Customer@2
2010/03/31 4:05:08 PM kernel BSD root: disk0s2, major 14, minor 2
2010/03/31 4:05:08 PM kernel jnl: unknown-dev: replay_journal: from: 664064 to: 6014464 (joffset 0x254000)
2010/03/31 4:05:08 PM kernel AppleIntelCPUPowerManagement: initialization complete
2010/03/31 4:05:08 PM kernel jnl: unknown-dev: journal replay done.
2010/03/31 4:04:57 PM com.apple.launchd[1] * launchd[1] has started up. *
2010/03/31 4:05:16 PM kernel disk0s2: I/O error.
2010/03/31 4:05:16 PM kernel
2010/03/31 4:05:16 PM kernel
2010/03/31 4:05:16 PM DirectoryService[11] Improper shutdown detected
2010/03/31 4:05:17 PM kernel systemShutdown false
2010/03/31 4:05:17 PM blued[17] Apple Bluetooth daemon started
2010/03/31 4:39:43 PM kernel npvhash=4095
2010/03/31 4:05:27 PM mDNSResponder[18] mDNSResponder mDNSResponder-214.3 (Feb 11 2010 04:49:16) starting
2010/03/31 4:39:43 PM kernel PAE enabled
2010/03/31 4:39:43 PM kernel 64 bit mode enabled
2010/03/31 4:39:43 PM kernel Darwin Kernel Version 10.3.0: Fri Feb 26 11:58:09 PST 2010; root:xnu-1504.3.12~1/RELEASE_I386
2010/03/31 4:39:43 PM kernel vmpagebootstrap: 508166 free pages and 16122 wired pages
2010/03/31 4:39:43 PM kernel standard timeslicing quantum is 10000 us
2010/03/31 4:39:43 PM kernel migtable_maxdispl = 73
2010/03/31 4:39:43 PM kernel AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
2010/03/31 4:39:43 PM kernel AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
2010/03/31 4:39:43 PM kernel calling mpopolicyinit for Quarantine
2010/03/31 4:39:43 PM kernel Security policy loaded: Quarantine policy (Quarantine)
2010/03/31 4:39:43 PM kernel calling mpopolicyinit for Sandbox
2010/03/31 4:39:43 PM kernel Security policy loaded: Seatbelt sandbox policy (Sandbox)
2010/03/31 4:39:43 PM kernel calling mpopolicyinit for TMSafetyNet
2010/03/31 4:39:43 PM kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
2010/03/31 4:39:43 PM kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
2010/03/31 4:39:43 PM kernel The Regents of the University of California. All rights reserved.
2010/03/31 4:39:43 PM kernel MAC Framework successfully initialized
2010/03/31 4:39:43 PM kernel using 10485 buffer headers and 4096 cluster IO buffer headers
2010/03/31 4:39:43 PM kernel IOAPIC: Version 0x20 Vectors 64:87
2010/03/31 4:39:43 PM kernel ACPI: System State [S0 S3 S4 S5] (S3)
2010/03/31 4:39:43 PM kernel mbinit: done (64 MB memory set for mbuf pool)
2010/03/31 4:39:43 PM kernel Intel PATA has safe-sleep
2010/03/31 4:39:43 PM kernel rooting via boot-uuid from /chosen: 97D858DD-E1B0-36BF-88C8-5FFD31631E7C
2010/03/31 4:39:43 PM kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
2010/03/31 4:39:43 PM kernel com.apple.AppleFSCompressionTypeZlib load succeeded
2010/03/31 4:39:43 PM kernel AppleIntelCPUPowerManagementClient: ready
2010/03/31 4:39:43 PM kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PATA@1F,1/AppleIntelPIIXAT ARoot/PRID@0/AppleIntelPIIXPATA/ATADeviceNub@0/AppleATADiskDriver/IOATABlockStor ageDevice/IOBlockStorageDriver/SAMSUNG HS082HB SAMSUNG HS082HB Media/IOGUIDPartitionScheme/Customer@2
2010/03/31 4:39:43 PM kernel BSD root: disk0s2, major 14, minor 2
2010/03/31 4:39:43 PM kernel USBMSC Identifier (non-unique): 000881202658 0x5ac 0x1500 0x1221
2010/03/31 4:39:43 PM kernel AppleIntelCPUPowerManagement: initialization complete
2010/03/31 4:39:35 PM com.apple.launchd[1] * launchd[1] has started up. *
2010/03/31 4:39:44 PM DirectoryService[11] Improper shutdown detected
2010/03/31 4:39:47 PM kernel systemShutdown false
2010/03/31 4:39:49 PM blued[17] Apple Bluetooth daemon started
2010/03/31 4:39:56 PM mDNSResponder[18] mDNSResponder mDNSResponder-214.3 (Feb 11 2010 04:49:16) starting
2010/03/31 4:39:57 PM com.apple.SecurityServer[23] Session 0x5fbff962 created
2010/03/31 4:39:58 PM configd[14] setting hostname to "SanghAir.local"
2010/03/31 4:39:58 PM configd[14] network configuration changed.
2010/03/31 4:39:58 PM com.apple.SecurityServer[23] Entering service
2010/03/31 4:39:59 PM configd[14] network configuration changed.
2010/03/31 4:40:01 PM kernel Previous Shutdown Cause: 3
2010/03/31 4:40:01 PM kernel BTCOEXIST on
2010/03/31 4:40:01 PM kernel wl0: Broadcom BCM4328 802.11 Wireless Controller
2010/03/31 4:40:01 PM kernel 5.10.91.27
2010/03/31 4:40:01 PM configd[14] network configuration changed.
2010/03/31 4:40:03 PM kernel [04df7e00][BNBMouseDevice::init][51] init is complete
2010/03/31 4:40:03 PM configd[14] network configuration changed.
2010/03/31 4:40:04 PM kernel [04df7e00][BNBMouseDevice::handleStart][51] Done
2010/03/31 4:40:04 PM kernel [0510e300][AppleMultitouchHIDEventDriver::start] entered
2010/03/31 4:40:04 PM kernel [04dae480][AppleMultitouchDevice::start] entered
2010/03/31 4:40:05 PM kernel IG: Invalid firmware max backlight setting
2010/03/31 4:40:05 PM bootlog[51] BOOT_TIME: 1270078774 0
2010/03/31 4:40:09 PM kernel Waiting for DSMOS...
2010/03/31 4:40:11 PM com.apple.usbmuxd[32] usbmuxd-190 built for iTunesNineOne on Mar 8 2010 at 20:25:36, running 32 bit
2010/03/31 4:40:11 PM fseventsd[44] event logs in /.fseventsd out of sync with volume. destroying old logs. (2606 37 2675)
2010/03/31 4:40:12 PM sudo[61] root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/libexec/StartupItemContext /usr/bin/open -a /Library/Application Support/iStat Server/iStat Server Updater.app/Contents/Resources/UpdateChecker.app
2010/03/31 4:40:23 PM fseventsd[44] log dir: /.fseventsd getting new uuid: 33FF610B-B3F4-42BA-A150-BE95530A86D0
2010/03/31 4:40:24 PM kernel Warning - kext com.apple.iokit.CHUDKernLib has immediate dependencies on both com.apple.kernel* and com.apple.kpi.* components; use only one style.
2010/03/31 4:40:34 PM com.apple.launchd[1] System: Bug: launchdcorelogic.c:8758 (24003):2
2010/03/31 4:40:34 PM com.apple.launchd[1] System: jobmigspawn() can't find its session!
2010/03/31 4:40:34 PM com.bjango.istatserver[56] LSOpenURLsWithRole() failed for the application /Library/Application Support/iStat Server/iStat Server Updater.app/Contents/Resources/UpdateChecker.app with error -10810.
2010/03/31 4:40:34 PM /usr/bin/open[67] spawnvialaunchd() failed, errno=5 label=[0x0-0x1001].com.yourcompany.UpdateChecker path=/Library/Application Support/iStat Server/iStat Server Updater.app/Contents/Resources/UpdateChecker.app/Contents/MacOS/UpdateChecker flags=1
2010/03/31 4:40:34 PM com.bjango.istatserver[56] launchctl bsexec failed: Inappropriate ioctl for device
2010/03/31 4:40:43 PM _mdnsresponder[74] /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
2010/03/31 4:40:43 PM _mdnsresponder[77] sntp options: a=2 v=1 e=0.100 E=5.000 P=2147483647.000
2010/03/31 4:40:43 PM _mdnsresponder[77] d=15 c=5 x=0 op=1 l=/var/run/sntp.pid f= time.apple.com
2010/03/31 4:40:43 PM _mdnsresponder[77] sntp: getaddrinfo(hostname, ntp) failed with nodename nor servname provided, or not known
2010/03/31 4:40:44 PM kernel Warning - kext com.apple.iokit.CHUDProf has immediate dependencies on both com.apple.kernel* and com.apple.kpi.* components; use only one style.
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: timed out waiting for IOKit to quiesce
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: Busy services :
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1 [2]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert [3]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/CPU0@0 [1]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/CPU0@0/AppleACPICPU [2]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/CPU1@1 [1]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/CPU1@1/AppleACPICPU [2]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0 [1]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI [3]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/MCHC@0 [2]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/GFX0@2 [3]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/GFX0@2/AppleIntelGMAX31 00FB [1]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/GFX0@2/AppleIntelGMAX31 00FB/gpu-sensor [2]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/HDEF@1B [1]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/HDEF@1B/AppleHDAControl ler@1B [1]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/HDEF@1B/AppleHDAControl ler@1B/IOHDACodecDevice@1B,0 [1]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/HDEF@1B/AppleHDAControl ler@1B/IOHDACodecDevice@1B,0/IOHDACodecDriver [1]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/HDEF@1B/AppleHDAControl ler@1B/IOHDACodecDevice@1B,0/IOHDACodecDriver/IOHDACodecFunction@1B,0,1 [1]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/HDEF@1B/AppleHDAControl ler@1B/IOHDACodecDevice@1B,0/IOHDACodecDriver/IOHDACodecFunction@1B,0,1/AppleHDA CodecGeneric [2]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/HDEF@1B/AppleHDAControl ler@1B/IOHDACodecDevice@1B,0/IOHDACodecDriver/IOHDACodecFunction@1B,0,1/AppleHDA CodecGeneric/AppleHDADriver [1]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/HDEF@1B/AppleHDAControl ler@1B/IOHDACodecDevice@1B,0/IOHDACodecDriver/IOHDACodecFunction@1B,0,1/AppleHDA CodecGeneric/AppleHDADriver/AppleHDAPlatformDriverLoader [2]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/HDEF@1B/AppleHDAControl ler@1B/IOHDACodecDevice@1B,0/IOHDACodecDriver/IOHDACodecFunction@1B,0,1/AppleHDA CodecGeneric/AppleHDADriver/AppleHDAPlatformDriverLoader/AppleHDAPlatformDriver [1]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/IOResources [3]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: MacBookAir1,1/IOResources/AppleProfileOSHooks [1]
2010/03/31 4:40:44 PM configd[14] InterfaceNamer: No network stack object
2010/03/31 4:40:44 PM /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[40] Login Window Application Started
2010/03/31 4:40:45 PM kernel DSMOS has arrived
2010/03/31 4:40:45 PM kernel IntelMemory::init
2010/03/31 4:40:45 PM kernel IntelMemory::init
2010/03/31 4:40:45 PM kernel InitPool: offset= 0x08000000 size = 0x08000000
2010/03/31 4:40:45 PM kernel AirPort_Brcm43xx: Ethernet address 00:1f:5b:d6:4c:bc
2010/03/31 4:40:45 PM kernel IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
2010/03/31 4:40:45 PM kernel IO80211Interface::efiNVRAMPublished():
2010/03/31 4:40:46 PM kernel AirPort: Link Down on en0. Reason 1 (Unspecified).
2010/03/31 4:40:47 PM kernel en0: 802.11d country code set to 'US'.
2010/03/31 4:40:47 PM kernel en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
2010/03/31 4:40:47 PM kernel Auth result for: 00:1f:5b:88:7b:f5 MAC AUTH succeeded
2010/03/31 4:40:47 PM kernel AirPort: Link Up on en0
2010/03/31 4:40:47 PM kernel AirPort: RSN handshake complete on en0
2010/03/31 4:40:50 PM Firewall[63] krb5kdc is listening from :::88 proto=6
2010/03/31 4:40:50 PM Firewall[63] krb5kdc is listening from 0.0.0.0:88 proto=6
2010/03/31 4:40:52 PM configd[14] network configuration changed.
2010/03/31 4:40:53 PM kernel display: Not usable
2010/03/31 4:40:55 PM com.apple.SecurityServer[23] Session 0x24d957 created
2010/03/31 4:40:55 PM com.apple.SecurityServer[23] Session 0x24d957 attributes 0x30
2010/03/31 4:40:56 PM Firewall[63] AppleVNCServer is listening from ::ffff:0.0.0.0:5900 proto=6
2010/03/31 4:40:57 PM Firewall[63] krb5kdc is listening from :::88 proto=6
2010/03/31 4:40:57 PM Firewall[63] krb5kdc is listening from 0.0.0.0:88 proto=6
2010/03/31 4:41:00 PM loginwindow[40] Login Window Started Security Agent
2010/03/31 4:41:01 PM WindowServer[81] kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
2010/03/31 4:41:01 PM com.apple.WindowServer[81] Wed Mar 31 16:41:01 SanghAir.local WindowServer[81] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
2010/03/31 4:41:03 PM SecurityAgent[101] Showing Login Window
2010/03/31 4:41:19 PM loginwindow[40] Login Window - Returned from Security Agent
2010/03/31 4:41:20 PM shutdown[105] halt by _mdnsresponder:
2010/03/31 4:41:20 PM shutdown[105] SHUTDOWN_TIME: 1270078880 427317
2010/03/31 4:41:21 PM kernel systemShutdown true
2010/03/31 4:41:21 PM kernel Kext loading now disabled.
2010/03/31 4:41:21 PM kernel Kext unloading now disabled.
2010/03/31 4:41:21 PM kernel Kext autounloading now disabled.
2010/03/31 4:41:21 PM kernel Kernel requests now disabled.
2010/03/31 4:41:20 PM mDNSResponder[18] mDNSResponder mDNSResponder-214.3 (Feb 11 2010 04:49:16) stopping
2010/03/31 4:41:20 PM mDNSResponder[18] mDNSDeregisterinternal: 51 _kerberos.SanghAir.local. TXT LKDC:SHA1.63909B41F91883122D56212BD43351FAEE01E166 already marked kDNSRecordTypeDeregistering
2010/03/31 4:41:20 PM DirectoryService[11] BUG in libdispatch: 10D573 - 1960 - 0x10004004
2010/03/31 4:41:21 PM ntpd_initres[78] ntpd exiting on signal 15
2010/03/31 4:41:21 PM SecurityAgent[101] CGSShutdownServerConnections: Detaching application from window server
2010/03/31 4:41:21 PM SecurityAgent[101] (ipc/send) invalid destination port: CGSReleaseShmem : Cannot release shared memory
2010/03/31 4:41:21 PM SecurityAgent[101] kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
2010/03/31 4:41:21 PM SecurityAgent[101] CGSDisplayServerShutdown: Detaching display subsystem from window server
2010/03/31 4:42:18 PM kernel npvhash=4095
2010/03/31 4:42:18 PM kernel PAE enabled
2010/03/31 4:42:18 PM kernel 64 bit mode enabled
2010/03/31 4:42:18 PM kernel Darwin Kernel Version 10.3.0: Fri Feb 26 11:58:09 PST 2010; root:xnu-1504.3.12~1/RELEASE_I386
2010/03/31 4:42:18 PM kernel vmpagebootstrap: 508166 free pages and 16122 wired pages
2010/03/31 4:42:18 PM kernel standard timeslicing quantum is 10000 us
2010/03/31 4:42:18 PM kernel migtable_maxdispl = 73
2010/03/31 4:42:18 PM kernel AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
2010/03/31 4:42:18 PM kernel AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
2010/03/31 4:42:18 PM kernel calling mpopolicyinit for Quarantine
2010/03/31 4:42:18 PM kernel Security policy loaded: Quarantine policy (Quarantine)
2010/03/31 4:42:18 PM kernel calling mpopolicyinit for Sandbox
2010/03/31 4:42:18 PM kernel Security policy loaded: Seatbelt sandbox policy (Sandbox)
2010/03/31 4:42:18 PM kernel calling mpopolicyinit for TMSafetyNet
2010/03/31 4:42:18 PM kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
2010/03/31 4:42:18 PM kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
2010/03/31 4:42:18 PM kernel The Regents of the University of California. All rights reserved.
2010/03/31 4:42:18 PM kernel MAC Framework successfully initialized
2010/03/31 4:42:18 PM kernel using 10485 buffer headers and 4096 cluster IO buffer headers
2010/03/31 4:42:18 PM kernel IOAPIC: Version 0x20 Vectors 64:87
2010/03/31 4:42:18 PM kernel ACPI: System State [S0 S3 S4 S5] (S3)
2010/03/31 4:42:18 PM kernel mbinit: done (64 MB memory set for mbuf pool)
2010/03/31 4:42:18 PM kernel Intel PATA has safe-sleep
2010/03/31 4:42:18 PM kernel rooting via boot-uuid from /chosen: 97D858DD-E1B0-36BF-88C8-5FFD31631E7C
2010/03/31 4:42:18 PM kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
2010/03/31 4:42:18 PM kernel com.apple.AppleFSCompressionTypeZlib load succeeded
2010/03/31 4:42:18 PM kernel AppleIntelCPUPowerManagementClient: ready
2010/03/31 4:42:18 PM kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PATA@1F,1/AppleIntelPIIXAT ARoot/PRID@0/AppleIntelPIIXPATA/ATADeviceNub@0/AppleATADiskDriver/IOATABlockStor ageDevice/IOBlockStorageDriver/SAMSUNG HS082HB SAMSUNG HS082HB Media/IOGUIDPartitionScheme/Customer@2
2010/03/31 4:42:18 PM kernel BSD root: disk0s2, major 14, minor 2
2010/03/31 4:42:18 PM kernel USBMSC Identifier (non-unique): 2HAABTWK 0xd49 0x7300 0x121
2010/03/31 4:42:18 PM kernel USBF: 2.421 [0x4729500] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 3 of Hub at 0x1d200000)
2010/03/31 4:42:18 PM kernel USBF: 2.423 [0x4729500] The IOUSBFamily was not able to enumerate a device.
2010/03/31 4:42:18 PM kernel AppleIntelCPUPowerManagement: initialization complete
2010/03/31 4:42:08 PM com.apple.launchd[1] * launchd[1] has started up. *
2010/03/31 4:42:19 PM kernel systemShutdown false
2010/03/31 4:42:19 PM blued[17] Apple Bluetooth daemon started
2010/03/31 4:42:25 PM mDNSResponder[20] mDNSResponder mDNSResponder-214.3 (Feb 11 2010 04:49:16) starting
2010/03/31 4:42:26 PM com.apple.SecurityServer[28] Session 0x5fbff962 created
2010/03/31 4:42:26 PM com.apple.SecurityServer[28] Entering service
2010/03/31 4:42:27 PM kernel jnl: disk1s2: replay_journal: from: 23303680 to: 23345152 (joffset 0xe8e000)
2010/03/31 4:42:27 PM kernel jnl: disk1s2: journal replay done.
2010/03/31 4:42:28 PM configd[15] network configuration changed.
2010/03/31 4:42:28 PM configd[15] setting hostname to "SanghAir.local"
2010/03/31 4:42:29 PM kernel Previous Shutdown Cause: 5
2010/03/31 4:42:30 PM kernel BTCOEXIST on
2010/03/31 4:42:30 PM kernel wl0: Broadcom BCM4328 802.11 Wireless Controller
2010/03/31 4:42:30 PM kernel 5.10.91.27
2010/03/31 4:42:30 PM configd[15] network configuration changed.
2010/03/31 4:42:31 PM kernel AppleUSBEthernet 0x23fa8000 init
2010/03/31 4:42:31 PM kernel AppleUSBEthernet: - Version number 2.1.0, Input buffers 64, Output buffers 64
2010/03/31 4:42:32 PM kernel IG: Invalid firmware max backlight setting
2010/03/31 4:42:32 PM configd[15] network configuration changed.
2010/03/31 4:42:33 PM kernel Warning - kext com.apple.iokit.CHUDKernLib has immediate dependencies on both com.apple.kernel* and com.apple.kpi.* components; use only one style.
2010/03/31 4:42:33 PM kernel [05063c00][BNBMouseDevice::init][51] init is complete
2010/03/31 4:42:33 PM kernel [05063c00][BNBMouseDevice::handleStart][51] Done
2010/03/31 4:42:33 PM kernel [0548d500][AppleMultitouchHIDEventDriver::start] entered
2010/03/31 4:42:33 PM kernel [05489b80][AppleMultitouchDevice::start] entered
2010/03/31 4:42:33 PM bootlog[53] BOOT_TIME: 1270078927 0
2010/03/31 4:42:35 PM kernel Warning - kext com.apple.iokit.CHUDProf has immediate dependencies on both com.apple.kernel* and com.apple.kpi.* components; use only one style.
2010/03/31 4:42:35 PM com.apple.usbmuxd[34] usbmuxd-190 built for iTunesNineOne on Mar 8 2010 at 20:25:36, running 32 bit
2010/03/31 4:42:36 PM kernel Waiting for DSMOS...
2010/03/31 4:42:36 PM sudo[66] root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/libexec/StartupItemContext /usr/bin/open -a /Library/Application Support/iStat Server/iStat Server Updater.app/Contents/Resources/UpdateChecker.app
2010/03/31 4:42:37 PM Firewall[64] krb5kdc is listening from :::88 proto=6
2010/03/31 4:42:37 PM Firewall[64] krb5kdc is listening from 0.0.0.0:88 proto=6
2010/03/31 4:42:37 PM com.apple.launchd[1] System: Bug: launchdcorelogic.c:8758 (24003):0
2010/03/31 4:42:37 PM com.apple.launchd[1] System: jobmigspawn() can't find its session!
2010/03/31 4:42:37 PM /usr/bin/open[70] spawnvialaunchd() failed, errno=5 label=[0x0-0x1001].com.yourcompany.UpdateChecker path=/Library/Application Support/iStat Server/iStat Server Updater.app/Contents/Resources/UpdateChecker.app/Contents/MacOS/UpdateChecker flags=1
2010/03/31 4:42:37 PM com.bjango.istatserver[59] LSOpenURLsWithRole() failed for the application /Library/Application Support/iStat Server/iStat Server Updater.app/Contents/Resources/UpdateChecker.app with error -10810.
2010/03/31 4:42:37 PM com.bjango.istatserver[59] launchctl bsexec failed: Inappropriate ioctl for device
2010/03/31 4:42:55 PM /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[42] Login Window Application Started
2010/03/31 4:42:56 PM kernel DSMOS has arrived
2010/03/31 4:42:56 PM kernel IntelMemory::init
2010/03/31 4:42:56 PM kernel IntelMemory::init
2010/03/31 4:42:56 PM kernel InitPool: offset= 0x08000000 size = 0x08000000
2010/03/31 4:42:56 PM kernel AppleUSBEthernet: Ethernet address 00:1f:5b:fe:d3:73
2010/03/31 4:42:56 PM kernel AirPort_Brcm43xx: Ethernet address 00:1f:5b:d6:4c:bc
2010/03/31 4:42:56 PM kernel IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
2010/03/31 4:42:56 PM kernel IO80211Interface::efiNVRAMPublished():
2010/03/31 4:42:56 PM kernel AirPort: Link Down on en0. Reason 1 (Unspecified).
2010/03/31 4:42:57 PM kernel AppleUSBEthernet::monitorLinkStatus - Link up at 100 Mbps - Full Duplex (PHY regs 5,6:0xcde1,0x000b)
2010/03/31 4:42:58 PM kernel en0: 802.11d country code set to 'US'.
2010/03/31 4:42:58 PM kernel en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
2010/03/31 4:42:58 PM kernel Auth result for: 00:1f:5b:88:7b:f5 MAC AUTH succeeded
2010/03/31 4:42:58 PM kernel AirPort: Link Up on en0
2010/03/31 4:42:59 PM kernel AirPort: RSN handshake complete on en0
2010/03/31 4:43:01 PM kernel display: Not usable
2010/03/31 4:43:01 PM configd[15] network configuration changed.
2010/03/31 4:43:03 PM configd[15] network configuration changed.
2010/03/31 4:43:06 PM com.apple.SecurityServer[28] Session 0x24c257 created
2010/03/31 4:43:06 PM com.apple.SecurityServer[28] Session 0x24c257 attributes 0x30
2010/03/31 4:43:07 PM Firewall[64] AppleVNCServer is listening from ::ffff:0.0.0.0:5900 proto=6
2010/03/31 4:43:08 PM Firewall[64] krb5kdc is listening from :::88 proto=6
2010/03/31 4:43:08 PM Firewall[64] krb5kdc is listening from 0.0.0.0:88 proto=6
2010/03/31 4:43:11 PM loginwindow[42] Login Window Started Security Agent
2010/03/31 4:43:13 PM WindowServer[77] kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
2010/03/31 4:43:13 PM com.apple.WindowServer[77] Wed Mar 31 16:43:13 SanghAir.local WindowServer[77] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
2010/03/31 4:43:14 PM SecurityAgent[100] Showing Login Window
2010/03/31 4:43:17 PM SecurityAgent[100] User info context values set for conalho
2010/03/31 4:43:17 PM authorizationhost[99] Failed to authenticate user <conalho> (tDirStatus: -14090).
2010/03/31 4:43:21 PM SecurityAgent[100] User info context values set for conalho
2010/03/31 4:43:21 PM SecurityAgent[100] Login Window Showing Progress
2010/03/31 4:43:22 PM SecurityAgent[100] Login Window done
2010/03/31 4:43:22 PM loginwindow[42] Login Window - Returned from Security Agent
2010/03/31 4:43:22 PM loginwindow[42] USER_PROCESS: 42 console
2010/03/31 4:43:22 PM sudo[103] root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/libexec/StartupItemContext /usr/bin/open -a /Library/Application Support/iStat Server/DiskTool.app
2010/03/31 4:43:22 PM com.apple.launchd.peruser.501[105] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
2010/03/31 4:43:22 PM com.apple.launchd.peruser.501[105] (com.apple.SystemUIServer.agent) Conflict with job: 0x1001052e0.anonymous.SecurityAgent over Mach service: com.apple.tsm.uiserver
2010/03/31 4:43:28 PM com.apple.launchd.peruser.501[105] (com.apple.AddressBook.abd) The following job tried to hijack the service "com.apple.AddressBook.abd" from this job: [0x0-0xa00a].com.apple.AddressBook.abd
2010/03/31 4:43:41 PM Firewall[64] AppleVNCServer is listening from ::ffff:0.0.0.0:5900 proto=6
2010/03/31 4:43:45 PM com.apple.launchd.peruser.501[105] (com.apple.Kerberos.renew.plist[129]) Exited with exit code: 1
2010/03/31 4:43:45 PM mdworker[98] (Error) SyncInfo: Catalog changed during searchfs too many times -- falling back to fsw search /
2010/03/31 4:43:47 PM com.apple.fontd[121] FODBError: FODBReconcileWithAuxFile called: kAuxFileHeadersDontMatchErr
2010/03/31 4:44:04 PM Sofa Control[148] INFO: Sofa Control starting on 2010-03-31 16:44:04 -0700
2010/03/31 4:44:08 PM Alarm Clock[143] Initializing Prefs...
2010/03/31 4:44:08 PM Alarm Clock[143] Initializing AlarmScheduler...
2010/03/31 4:44:09 PM Alarm Clock[143] Initializing WindowManager...
2010/03/31 4:44:09 PM Alarm Clock[143] Initializing AlarmTasks...
2010/03/31 4:44:09 PM Alarm Clock[143] Registering for system power notifications...
2010/03/31 4:44:11 PM ShoveBox[147] Database version is 6
2010/03/31 4:44:14 PM SMARTReporter[145] Drive: 'SAMSUNG HS082HB (SanghAir HD | S1BPJ16Q330372 | disk0)' Status: SMARTOK (S.M.A.R.T. condition not exceeded, drive OK)
2010/03/31 4:44:21 PM [0x0-0x19019].com.skype.skype[149] Main starting with pid 149 parent pid 105
2010/03/31 4:44:23 PM Sofa Control[148] INFO: Adding the device AppleRemote
2010/03/31 4:44:24 PM Sofa Control[148] INFO: Got access to remote control (5)
2010/03/31 4:44:34 PM Sofa Control[148] Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
2010/03/31 4:44:34 PM Alarm Clock[143] Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
2010/03/31 4:44:40 PM SpeechSynthesisServer[146] __CFServiceControllerBeginPBSLoadForLocalizations timed out while talking to pbs
2010/03/31 4:45:05 PM kernel CoreServicesUIAg[154] Unable to clear quarantine `Headers': 93
2010/03/31 4:45:05 PM kernel CoreServicesUIAg[154] Unable to clear quarantine `Resources': 93
2010/03/31 4:45:05 PM kernel CoreServicesUIAg[154] Unable to clear quarantine `Sparkle': 93
2010/03/31 4:45:05 PM kernel CoreServicesUIAg[154] Unable to clear quarantine `fr.lproj': 93
2010/03/31 4:45:05 PM kernel CoreServicesUIAg[154] Unable to clear quarantine `fr_CA.lproj': 93
2010/03/31 4:45:05 PM kernel CoreServicesUIAg[154] Unable to clear quarantine `Current': 93
2010/03/31 4:45:10 PM ShoveBox[147] Checking database
2010/03/31 4:45:18 PM Alarm Clock[143] Ready
2010/03/31 4:45:21 PM MagicPrefs[153] Driver version 204.12.1 - 204.12.1 (791201)
2010/03/31 4:45:22 PM MagicPrefs[153] Event tap created 0x114c38550
2010/03/31 4:45:22 PM MagicPrefs[153] Magicprefs 1.8.2 (42) loaded on OSX Version 10.6.3 (Build 10D573) by login
2010/03/31 4:45:24 PM Skype[149] SkypeApplication::init called
2010/03/31 4:45:36 PM Firewall[64] Skype is listening from 0.0.0.0:39740 proto=6
2010/03/31 4:45:43 PM kernel AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving).
2010/03/31 4:45:43 PM configd[15] network configuration changed.
2010/03/31 4:45:46 PM Firewall[64] krb5kdc is listening from :::88 proto=6
2010/03/31 4:45:46 PM Firewall[64] krb5kdc is listening from 0.0.0.0:88 proto=6
2010/03/31 4:46:38 PM Firewall[64] Allow Skype connecting from 174.150.116.207:51093 to port 39740 proto=6
2010/03/31 4:49:28 PM cupsd[215] sandbox cache error: database is locked
2010/03/31 4:49:28 PM cupsd[217] sandbox cache error: database is locked
2010/03/31 4:53:45 PM /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[136] No valid tickets, timing out
2010/03/31 4:53:58 PM com.apple.kextcache[156] Created prelinked kernel /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache_i386.22102C7A.
{/quote}What SmartUtility reports is this:
Attributes
Pending Bad Sectors: 1
Removed Bad Sectors: 0
Reallocated Bad Sectors: 0
CRC Error Count: 0
Errors
Total Errors: 7064
Last Error Type: Unknown
Last Error Time: 0
When I open to see what the errors are, it shows this
location: /dev/disk0
partition count: 1
partitions: SanghAir HD,
SMART Support: Supported
Last SMART Error: *not set*
Model Family: *not set*
Model: SAMSUNG HS082HB
Serial Number: S1BPJ16Q330372
Firmware Version: NL101-06
Capacity: 80,026,361,856 bytes
ATA Version: 6
ATA Standard: ATA/ATAPI-6 T13 1410D revision 1
Health: Failing
Overall Health: PASSED
Offline Data Status: 0
Self Test Status: 121
Offline Data Collection Time: 0
Data Collection Capabilities: 59
SMART Capabilities: 3
Error Logging Capabilities: 1
Short Self Test Time: 2
Long Self Test Time: 46
Conveyance Self Test Time: 0
Attribute Log Revision: 4
Attribute Count: 24
Attributes:
ID# ATTRIBUTE NAME FLAG VALUE WORST THRESH TYPE UPDATED FAILED RAW VALUE
1 Raw Read Error Rate 0x000F 096 096 051 Pre-fail Always Never 2360
3 Spin Up Time 0x0007 094 093 000 Pre-fail Always Never 1922
4 Start/Stop Count 0x0032 096 096 000 Old age Always Never 4208
5 Reallocated Sector Count 0x0033 252 252 010 Pre-fail Always Never 0
7 Seek Error Rate 0x000E 099 099 000 Old age Always Never 2
8 Seek Time Performance 0x0024 252 252 000 Old age Offline Never 0
9 Power On Hours 0x0032 100 100 000 Old age Always Never 6236
10 Spin Retry Count 0x0032 252 252 000 Old age Always Never 0
12 Power Cycle Count 0x0032 098 098 000 Old age Always Never 2071
191 G-Sense Error Rate 0x0032 001 001 000 Old age Always Never 1235815
192 Power Off Retract Count 0x0032 093 093 000 Old age Always Never 8034
194 Temperature Celsius 0x0022 136 118 000 Old age Always Never 34 (Lifetime Min/Max 15/40)
195 Hardware ECC Recovered 0x001A 100 100 000 Old age Always Never 8414559519
196 Reallocated Event Count 0x0032 252 252 000 Old age Always Never 0
197 Current Pending Sector Count 0x0012 100 098 000 Old age Always Never 1
198 Offline Uncorrectable Sector Count 0x0030 252 252 000 Old age Offline Never 0
199 UDMA CRC Error Count 0x0036 200 200 000 Old age Always Never 0
200 Multi Zone Error Rate 0x000A 099 099 000 Old age Always Never 4
201 Soft Read Error Rate 0x0032 252 252 000 Old age Always Never 0
223 Load Retry Count 0x0032 095 095 000 Old age Always Never 5802
225 Load Cycle Count 0x0032 078 078 000 Old age Always Never 226865
255 Unknown Attribute 0x000A 008 008 000 --- Old age -3141
255 Unknown Attribute 0x0000 000 000 000 <== Data 0
254 FreeFallSensor 0x0000 000 000 000 <== Threshold 0
Error Log Version: 1
Error Count: 7064
Error Log:
Error 7064 occured at disk power-on lifetime: 0 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
00 50 08 B8 5B E8 E5
Error: Unknown
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC PoweredUpTime Command/Feature_Name
00 00 01 01 00 00 A0 00 00:00:22.062 NOP [Abort queued commands]
C8 00 08 B8 5B E8 E5 00 00:00:20.665 READ DMA
C8 00 28 90 5B E8 E5 00 00:00:20.664 READ DMA
C8 00 08 88 5B E8 E5 00 00:00:20.664 READ DMA
C8 00 78 10 5B E8 E5 00 00:00:20.662 READ DMA
Error 7063 occured at disk power-on lifetime: 0 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
00 00 00 00 00 00 00
Error: Unknown
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC PoweredUpTime Command/Feature_Name
00 00 01 01 00 00 A0 00 00:00:01.923 NOP [Abort queued commands]
CA 00 10 38 EF 35 40 00 00:33:33.604 WRITE DMA
CA 00 10 18 EF 35 40 00 00:33:33.604 WRITE DMA
CA 00 10 68 EE 35 40 00 00:33:33.603 WRITE DMA
CA 00 10 38 EE 35 40 00 00:33:33.603 WRITE DMA
Error 7062 occured at disk power-on lifetime: 0 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
40 51 27 41 49 06 40
Error: Uncorrectable Error with 39 sectors at LBA = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC PoweredUpTime Command/Feature_Name
C8 00 40 28 49 06 40 00 00:07:24.674 READ DMA
C8 00 40 28 49 06 40 00 00:07:23.219 READ DMA
C8 00 40 28 49 06 40 00 00:07:21.765 READ DMA
C8 00 40 28 49 06 40 00 00:07:20.311 READ DMA
C8 00 40 28 49 06 40 00 00:07:18.848 READ DMA
Error 7061 occured at disk power-on lifetime: 0 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
40 51 27 41 49 06 40
Error: Uncorrectable Error with 39 sectors at LBA = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC PoweredUpTime Command/Feature_Name
C8 00 40 28 49 06 40 00 00:07:23.219 READ DMA
C8 00 40 28 49 06 40 00 00:07:21.765 READ DMA
C8 00 40 28 49 06 40 00 00:07:20.311 READ DMA
C8 00 40 28 49 06 40 00 00:07:18.848 READ DMA
C8 00 40 E8 48 06 40 00 00:07:18.846 READ DMA
Error 7060 occured at disk power-on lifetime: 0 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
40 51 27 41 49 06 40
Error: Uncorrectable Error with 39 sectors at LBA = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC PoweredUpTime Command/Feature_Name
C8 00 40 28 49 06 40 00 00:07:21.765 READ DMA
C8 00 40 28 49 06 40 00 00:07:20.311 READ DMA
C8 00 40 28 49 06 40 00 00:07:18.848 READ DMA
C8 00 40 E8 48 06 40 00 00:07:18.846 READ DMA
C8 00 40 A8 48 06 40 00 00:07:18.845 READ DMA
Self Test Log Revision: 1
Self Test Log Count: 2
Self Test Log:
Num Test_Description Status Remaining LifeTime(hours) LBAof_firsterror
# 1 Extended offline Completed: read failure 90%% 6235 0
# 2 Short offline Completed: read failure 90%% 6235 0 -
I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extreme (2 TB drive plugged into the USB port). I see the drive on my laptop and I can add and delete files no problem. How do I get Itunes to search for the music here with out trying to copy it to my laptop's hard drive? I don't have enough space to do that.
How did you move the music to the external drive? What exactly is on the drive? The entire iTunes folder or only music? If it is the entire iTunes folder you can do the option+start suggestion earlier. If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move. iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507
-
My MacBook Pro hard drive crashed a little while ago and has been replaced. Is it possible to take tunes from iPod Classic and transfer all of them back to iTunes on computer? Is this just for purchased tunes or can I do it for ones that have been burned from CD's as well? Thanks for any help!
[Zevoneer's detailed instructions on getting music off an iPod|http://discussions.apple.com/message.jspa?messageID=9053179]
[Wired's How To: Get Your Music Off of Your iPod|http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod]
[http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipod-window s-mac-os-x/]
[Topic: Get music off iPhone|http://discussions.apple.com/message.jspa?messageID=11512841]
[Copying iTunes Store purchases from your iPod or iPhone to a computer|http://docs.info.apple.com/article.html?artnum=305465] -
My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?
You'll get better performance if you use a Firewire hard drive (especially if you buy a 7200 RPM drive). Firewire's IO speed is significantly faster than USB 2. USB 2 has a theoretical max speed of 480 Mbps except that it has extremely high over-head. The fastest speeds you can typically get are about 300 Mbps. Firewire, on the other hand, has very little overhead. The fastest speeds you can get are very nearly 800 Mbps. You will typically be constrained by the maximum read/write speed of the drive, not the speed of the I/O on the Firewire bus. Now if you had one of those nice shiny new Macs with the Thunderbolt I/O and a Thunderbolt drive (Light Peak) ... I think they alter space and time so that your data arrives before you know you want it.
Also... unless you want to buy a solid state drive (very expensive), try to keep your hard drives from becoming much more than about 60% full if you want great performance. A nearly "full" hard drive is, on average, only about half as fast as the same hard drive when nearly empty.
USB 2 will work perfectly fine... just not as fast.
Also... it's much safer to move the entire Aperture library than to "relocate masters". Your images must be managed. You can Aperture manage them, or you can manage them. But someone has to manage them. If you "relocate" them so that they are no longer stored inside the Aperture library then you'll need to work out a system of how you decide to organize things and it's critically important that you don't start moving files around or deleting things without Aperture's knowledge. If you do, you'll break the links to your masters and start having problems with missing masters. If you have Aperture manage the library then you don't need to worry about any of that stuff.... it's safer.
Do make backups (use the Aperture Vault or use some other backup program, but make sure you back up your work if you care about it.) There are only two kinds of hard drives in the world: (1) those that have failed and (2) those that are going to fail. There are no exceptions to this rule. Hard drives are cheap. Backup software is built into Aperture and into your Mac. -
New 15" Macbook Pro hard drive failure
It is common for a 15" Macbook Pro hard drive to crash after 3 months? How does Apple Support generally fix? Genuis bar seemed overwhelmed by holiday crowds and recommended an $8k 3rd party vendor.
"Any disk can fail at any time."
Over a large sample, the drives used are extremely reliable. You did not have a large sample, you had ONE drive.
Now you are much smarter than you were before this disaster. Apple will not pay for your data recovery. You (and everyone) need a backup solution.
Apple provides an excelent backup solution called Time Machine, that can do hourly backups to an external drive without disturbing your current work. Buy yourself an external drive at least twice as large as the built-in. Turn on Time machine, make sure it is working, plug it in at least daily, and then don't worry about it any more. -
Incredibly slow MacBook, Internal Hard Drive issues...
Good morning everybody! I'm apologize if this post is extremely wordy...
I am extremely baffled by a particular issue with a MacBook 2.0GHz C2D which belongs to a friend of mine. The warranty is expired.
_Brief history:_
Several months ago, this MacBook could not find a bootable volume. The drive would not mount when booting from an external FireWire hard drive. It would not mount when the MacBook was put in Target Disk Mode and connected to another Mac. When booting from an external USB hard drive or with my MacBook Pro connected to the MacBook via Target Disk Mode, the MacBook booted up quickly. I came to the conclusion that the internal hard drive must have failed and needed to be replaced. Ultimately, the data was not recoverable from this drive.
I then proceeded to swap out the defective Apple OEM Seagate hard drive with a known working Apple OEM Fujitsu hard drive. When booting from the Leopard Install DVD, the MacBook would boot incredibly slow, but would finally reach the Installer Language screen. When proceeding to install Leopard, the drive would take a very long time to have data written to it, and ultimately the install failed. I removed the new hard drive from the MacBook and placed it in an external USB enclosure, attached it to the MacBook and booted from the Leopard Install DVD. Leopard would install successfully. I removed the hard drive from the enclosure and reinstalled it the MacBook. When booting from the freshly installed OS, the MacBook would take a very long time to boot. The MacBook is extremely slow!!!
I checked the Activity Monitor to ensure CPU & System Memory Usage was not going crazy. All Processes where normal with adequate CPU & Memory headroom.
I took the MacBook apart thinking that the SATA Controller Cable might be loose. No, it was firmly in place. I reassembled the MacBook and booted it up again. Still incredibly slow!
Finally, after several reboot attempts, the MacBook would book up quickly and operation was perfect. I applied all updates and continued testing the MacBook with great success. Gave my friend his MacBook back and he was grateful.
_Now for the kicker..._
My friend brought me his MacBook a week ago complaining that the MacBook was operating extremely slow (much like when I was initially testing it before). I verified the MacBook was slow when I tried using it. I tried several reboots and then it would get stuck on the gray Apple with spinning gear.
I tried booting into Single User Mode, but it gets stuck on "Waiting for root device"
I put the MacBook in Target Disk Mode and connected it to my G5 2.0GHz Dual Core. The hard drive would mount quickly on the G5 and I used Disk Utility to create a Restore Image. The disk operation would perform normally and the image would be created successfully.
I then partitioned the MacBook's hard drive when connected to the G5, ejected and proceeded to attempt OS reinstall. No dice! The hard drive is not even detected by the Disk Utility on the Leopard Install DVD.
Finally after several reattempts, the hard drive is recognized, but is extremely slow when trying to reinstall...and again, ultimately install fails. Using Disk Utility from Leopard Install DVD, the hard drive fails to unmount when I try formatting.
I don't have Apple Hardware Test disc for the MacBook or Apple Service Diagnostics disc for this model. Running TechTool Pro shows hardware to be okay, disk controller onboard the Fujitsu drive is okay, but running SMART & Surface Scan takes a long, long time (which I'm certain will ultimately error out). Running Drive Genius takes a long, long time as well.
Conclusion:
I think the SATA Controller Cable is defective. I can't think of anything else that would cause disk errors or performance issues like this. Your input is truly appreciated!Even though no one responded to my post, I thought I'd share the resolution with the entire Apple community. I hope this information will be helpful to some of you with MacBooks or MacBook Pros that may be running painfully slow or may be exhibiting hard drive issues because your machine won't recognize the boot drive or fails to properly boot on a perfectly healthy S.M.A.R.T. verified hard drive. It just might be the hard drive connector/cable. Here it goes...
I visited my local Apple Retail Store and asked a "Genius" at the Genius Bar about this issue and told him my thoughts about a possible failed hard drive connector/cable. First, he didn't even know what a hard drive connector was! Then, he arrogantly stated that he never heard of such a thing and that these cables never fail. Finally, he blatantly dispelled this as a possibility.
On the contrary with my experience, I have had many failed PATA controller cables that required replacement when supporting the desktop PC's at work. I have personally owned and supported many Apple manufactured laptops and desktops and have never encountered this issue on a Mac...until this MacBook!
So, after looking at the Service Manual for the MacBook, I went over to my local Apple Authorized Service Provider and purchased the Hard Drive Connector Apple Part #922-7579. I replaced the original cable, reassembled and proceeded to boot the MacBook with the Leopard DVD installer. The Fujitsu drive was immediately recognized and was able to be formatted and Leopard installed without incident. The MacBook boots off the internal hard drive as normal again and works nice and fast again.
Thank you all for your time!
:D -
I recently had the genius bar change my imac hard drive because it crashed. For some reason Time Machine didn't back up some of my important files. Can I get my damaged hard drive back from the genius bar to see if I can access that info?
Unfortunately, that drive is long gone, probably back to the mfr. Drives are not returned when they are exchanged. You can go by and ask them, but the chances are slim to none.
-
Damaged Hard Drive, Can I Clone?
I have a damaged hard drive that does everything but boot my MBP, I can use it as an external drive and it works fine. My question is when i get my new hard drive can i boot damaged hard drive in safe mode and clone it to new hard drive or will it transfer damage to new drive Im fairly sure the damage is physical though...
Have you attempted a software solution to your non-booting problem?
Step by Step to fix your Mac
or will it transfer damage to new drive. Im fairly sure the damage is physical though...
Well if there is damage to the data on the drive, then it's certainly going to transfer over.
Your best option would be to do a fresh install of 10.6 on the drive/new drive, then update...
Reducing bad sectors effect on hard drives
How to erase and install Snow Leopard 10.6
Next install your free iLife and any third party programs
Restoring your Free iLife (iPhoto, iMovie etc)
Then upgrade to the latest OS X version you were using via AppStore
Then install any third party programs from original sources.
Then cherry pick your files from the bad drive eliminating the corrupt ones, transferring manually out of the Music, Pictures, Documents etc., folders (do NOT use Migration or Setup Assistant against a corrupted drive/data.
(mind you have to transfer files into the same named user account, then likely have to reset #6 Users Permissions)
Then make plenty of backups/clones of this new install
Most commonly used backup methods -
My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.
After you have installed the OSX on the new HDD in your MBP, install the old HDD in an enclosure and connect it to your MBP via USB. Then try to drag and drop your data to the new HDD.
If this proves unsuccessful, you may look for data recovery software on the Internet. There will be free trails to see if it will work or not. If the trial suggests that it will work, then you will have to purchase the software.
The last resort is a professional data recovery service that will offer NO guarantees and charge a lot of money.
As you now can appreciate, backups eliminate such predicaments.
Ciao. -
My MacBook Pro Hard Drive recently gave me the gray folder with the question mark of death. Even as
My MacBook Pro Hard Drive recently gave me the gray folder with the question mark of death. Even as a Mac Newbie/Novice, I successfully installed a new hard drive and the OS (10.6.8) software from my installation discs. I have, however, lost the ability to play video using the spacebar and I have no idea on the steps necessary to correct this seemingly simple technical blip. .Here's my system overview:Model Name: MacBook Pro Model Identifier: MacBookPro6,2 Processor Name: Intel Core i5 Processor Speed: 2.4 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache (per core): 256 KB L3 Cache: 3 MB Memory: 4 GB Processor Interconnect Speed: 4.8 GT/s.
I am using the Premiere Pro CS5 NLE (with the 5.0.4 updates), and I have tried to reinstall the software (which is actually the Production Premium package) several times, but I still cannot use the spacebar (or any method) to play any of my imported videos.
PLEASE HELP in any way you can!
Prior to having to replace my hard drive, my software was working just fine. No problems at all. But now, it seems that I can't get it to play whatever type of file I import.
Again, I am a newbie to the Mac, so any and all correctional/repair assistance needs to be expalined as if I were a child : )
I would hate to try to revert to considering the sophmoric Final Cut Pro X editing software package, but I've got to do something to be able to get back to my editing activities.
zionhall
[email protected]Jorge242 wrote:
@FatMac the internet recovery doesnt work. It goes into recovery mode and then when i try to reinstall it cant find a disk to install it to. So what would be a good choice to take now?
Recovery Mode presents you with, among other things, Disk Utility. When you open that, if the internal shows up at all, first try to "Repair DIsk." If that doesn't work but if the "Media" line is present, try to format and partition it with a GUID partition table (understand that you will be erasing the contents of your internal). Then try to reinstall the OS. If that doesn't work, and since your Retina MBP didn't come with a DVD drive or DVDs, you'll need to try a hardware test using these instructions from Apple (short version: shut down, press the power button and hold down the "D" key). If none of those things work, let's hope you either have AppleCare or your warranty has some life left because the SSD in your rMBP is proprietary and expensive. You'll need to bring it to an Apple Genius for evaluation. -
I can't get app store on my old power book to download OS X, My macbook pro hard drive died and all I have is a windows hard drive, still has windows os on it, a 500 Gb USB drive and this power book. How can I get my macbook back up without spending money? Thanks
And what happens if the OPs Mac is of a newer version that came with a version of Snow Leopard above the 10.6.3 version that is on that Retail, meant for Upgrade, disc? Like if it came with 10.6.4/.5/.6/.7? That disc you linked to would not work.
He needs to contact Apple and get a replacement set of Original System Reinstall Discs. That is the only way he can be assured it will work and he would also get the iLife apps which he wouldn't buying that DVD disc you linked to.
dwb wrote:
The Snow Leopard DVD is $20 from Apple. You'll just have to wait a few days. BTW this is a full installer that works with any model computer that can run SL. Apple used to ship recovery/installation disks that were tied to specific computer models so that a 15" MBP installer disk coudn't be used on a 13" MBP computer. So you need either full installer or the recovery disks for your specific model.
And BTW, I have a 2009 13" MBP w/8GB RAM that is running Mavericks. With a 5400 RPM drive I used to experience a bit of beach balling (think hour glassing) but an SSD has given it new life. It feels now slower than the newest MBPs - it obviously benchmarks considerably slower but in everyday use it doesn't feel like a 4 1/2 year old computer at all.
Maybe you are looking for
-
ICM 7.5 Agent Password change utility/interface
I am running ICM 7.5 Enterprise. is there a web or any other interface which can be provided to Agents to change their pasword ?
-
I have family plan of 5 iphones and all them have the same apple id, the q. is how I can set each one with their own apple id? please advise...
-
Two Threads Sharing the Same Object
I am learning Java multithreading recently and I really hit the wall when I came to synchronizing data using the synchronized keyword. According to the explanation, synchronized will only work when 2 or more threads are accessing the same object. If
-
How to clear a container in OOPS...?
Hi, How to Clear a Container in Object Orientation Programming...? There is a method available......can you tell me that one....... Moderator message: Please search the forums and Google before posting basic questions. Thread
-
Dump on screen when configuring Process controlled workflow
Hi Experts, I am facing 1 problem in SAP SRM 7 ehp1. I am configuring Process controlled workflow. Previous workflow settings was Application controlled workflow as its been upgraded from SRM 5. If i run a RFX (BUS2200) cycle in application controll