Macbook dead after installing new ram (1gb in each slot)

After upgrading my MB ram to 2gb (1gb each slot) my MB would not start, no lights or action. I replaced the old ram and still nothing. I then went to a genius bar and they tested it out and even replaced the ram with ones they had and still nothing. I was then told that the logic board was dead. Has anyone had this problem? Since it is out of warranty I have to pay $280 to have them repair it which is a flat fee and they will fix it no matter what is wrong which I find is better then some rates I have seen posted online for $600 just for the logic board itself.
My MB is the 1.83, could 2gb be too much? I have had the MB since July 2006 and recently had battery problems before I replaced the ram. Could this have fried the logic board?
having a mac nightmare right now!

Improperly seated RAM is fairly common... but I haven't seen many comments about inserting RAM actually damaging the logic board... but you do have to use quite a bit of force to get them in there. The good thing is the price that they are charging you for the repair... as you mentioned, I've never seen them charge that little for replacing a logic board. I wonder if that is something new.

Similar Messages

Mac crashes regularly after installing new RAM

My laptop crashes at least once a day ever since installing new RAM. It seems to be triggered by quitting programs, usually Firefox, Logic or Spotify. There was nothing else connected to the Mac that brought about the latest crash but I do use an Mbox 2 on a regular basis.
Below is the last crash report and also the RAM profile. It's Kingston brand if that means anything.
*_Crash Report:_*
Interval Since Last Panic Report: 55868 sec
Panics Since Last Report: 1
Anonymous UUID: AEEF5666-4C4E-4FC1-AC7A-5A500F952BF9
Sat Jan 22 00:00:25 2011
panic(cpu 1 caller 0x2aab55): Kernel trap at 0x8b042474, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x8b042474, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x09947100, EBX: 0x09ad4a00, ECX: 0xe15f0000, EDX: 0x0a133800
CR2: 0x8b042474, EBP: 0x5294bb68, ESI: 0x08bd7f40, EDI: 0x0085f838
EFL: 0x00010246, EIP: 0x8b042474, CS: 0x00000008, DS: 0x03450010
Error code: 0x00000010
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x5294b968 : 0x21b50c (0x5d42fc 0x5294b99c 0x223974 0x0)
0x5294b9b8 : 0x2aab55 (0x59616c 0x8b042474 0xe 0x596336)
0x5294ba98 : 0x2a09a8 (0x5294bab0 0x246 0x5294bb68 0x8b042474)
0x5294baa8 : 0x8b042474 (0xe 0x48 0x52940010 0x230010)
0x5294bb68 : 0x1854f8f (0x9ad4a00 0x0 0x5294bbf8 0x60)
0x5294bb88 : 0x4ff5ae (0x9ad4b00 0x85f838 0x1 0x0)
0x5294bba8 : 0x50f6e0 (0x9ad4b00 0x85f838 0x5294bbd8 0x4ff931)
0x5294bbd8 : 0x50f854 (0x8bd7f40 0x0 0x1 0x0)
0x5294bbf8 : 0x4ff5ae (0x8bd7f40 0x0 0x1 0x1)
0x5294bc18 : 0x4ff5c9 (0x8bd7f40 0x0 0x5294bc48 0x4ff5ae)
0x5294bc38 : 0x531e12 (0x8bd7f40 0xffff 0x8bd4f84 0x4ff5c9)
0x5294bc58 : 0x531e45 (0x8bd4f80 0x246 0x5294bc98 0xb18e540)
0x5294bc78 : 0x4ff5ae (0x8bd4f80 0x0 0x1 0x1e)
0x5294bc98 : 0x4ff5c9 (0x8bd4f80 0x0 0x5294bce8 0x0)
0x5294bcb8 : 0x2844eb (0x8bd4f80 0xb18e540 0x1e 0x5294bce8)
0x5294bd08 : 0x21d8d1 (0xa088398 0xb2555a0 0x997aa24 0x1)
0x5294bd48 : 0x210a3a (0xa088300 0x12 0x5294bda8 0x20f45c)
0x5294bda8 : 0x21dda0 (0xa088300 0x10000 0x0 0x2107c2)
0x5294bdd8 : 0x23f567 (0x5294bdfc 0x24 0xa4289e4 0x0)
0x5294be28 : 0x214f6f (0xb18e540 0x1 0x1 0x221bb4)
0x5294be78 : 0x215581 (0x7fc7420 0x33303 0x43dfe330 0x8f1e1f4)
0x5294beb8 : 0x22c521 (0x7fc7420 0xc971640 0x5294bf08 0x47a0f3)
0x5294bf08 : 0x47ab28 (0x8f1e1f4 0x0 0x0 0x2ea2)
0x5294bf58 : 0x47ab56 (0x8f20000 0x0 0xc971684 0x0)
0x5294bf78 : 0x4f0f7d (0x8f20000 0xc971640 0xc971684 0x0)
0x5294bfc8 : 0x2a0ef8 (0xa1916c0 0x1 0x10 0xa194964)
Kernel Extensions in backtrace (with dependencies):
com.digidesign.mbox2.driver(8.0.0f1)@0x184e000->0x1871fff
dependency: com.apple.iokit.IOAudioFamily(1.7.9fc4)@0x90c000
dependency: com.apple.iokit.IOUSBFamily(4.1.7)@0x1232000
dependency: com.apple.driver.AppleUSBMergeNub(4.1.5)@0x1292000
dependency: com.apple.kext.OSvKernDSPLib(1.3)@0x908000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x948000
dependency: com.apple.driver.AppleUSBComposite(3.9.0)@0x1266000
BSD process name corresponding to current thread: Spotify
Mac OS version:
10H574
Kernel version:
Darwin Kernel Version 10.5.0: Fri Nov 5 23:20:39 PDT 2010; root:xnu-1504.9.17~1/RELEASE_I386
System model name: MacBook7,1 (Mac-F22C89C8)
System uptime in nanoseconds: 10016535514139
unloaded kexts:
com.apple.driver.AppleMCP89RootPortPM 1.11 (addr 0x11cd000, size 0x20480) - last unloaded 250987080117
loaded kexts:
com.digidesign.mbox2.driver 8.0.0f1 - last loaded 49888220612
com.rogueamoeba.hermes 2.0.2
com.paceap.kext.pacesupport.snowleopard 5.7.2
com.Cycling74.driver.Soundflower 1.5.1
tc.tctechnologies.driver.PaeFireStudio 8028
com.digidesign.iokit.DigiIO 8.0.0f1
com.digidesign.iokit.DigiDal 8.0.0f1
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.19
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleMikeyDriver 1.9.9f12
com.apple.driver.AudioAUUC 1.13
com.apple.driver.AppleUpstreamUserClient 3.4.5
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.driver.AppleHDA 1.9.9f12
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.AppleBacklight 170.0.34
com.apple.GeForce 6.2.4
com.apple.driver.AppleUSBTCButtons 200.3.2
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.driver.AppleHPET 1.5
com.apple.driver.AirPortBrcm43224 426.36.1
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleUSBHub 4.1.7
com.apple.nvenet 2.0.15
com.apple.driver.AppleUSBEHCI 4.1.7
com.apple.driver.AppleUSBOHCI 4.1.5
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.9fc4
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.nvidia.nv50hal 6.2.4
com.apple.NVDAResman 6.2.4
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
com.apple.iokit.IOBluetoothFamily 2.3.8f7
com.apple.driver.AppleUSBMultitouch 206.6
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.driver.AppleUSBMergeNub 4.1.5
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IO80211Family 312
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.NVSMU 2.2.7
com.apple.iokit.IOUSBFamily 4.1.7
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBook7,1, BootROM MB71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.60f5
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.36.1)
Bluetooth: Version 2.3.8f7, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK2555GSXF, 232.89 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0x06630000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0x06300000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24600000
*_Memory Profile_*
Memory Slots:
ECC: Disabled
BANK 0/DIMM0:
Size: 2 GB
Type: DDR3
Speed: 1067 MHz
Status: OK
Manufacturer: 0x0000
Part Number: 0x000000000000000000000000000000000000
Serial Number: 0x00000000
BANK 1/DIMM0:
Size: 2 GB
Type: DDR3
Speed: 1067 MHz
Status: OK
Manufacturer: 0x0000
Part Number: 0x000000000000000000000000000000000000
Serial Number: 0x00000000

It's almost impossible to trace back the panic report to a specific cause, but it's highly suspicious that you started experiencing problems after installing new RAM.
It's also strange that your RAM has no stated VendorID, Part Number or Serial Number.
I would return this memory poste haste.
Alternatively, if the DIMMs are from Kingston's ValueRAM range, just dump them in the garbage because that's where they belong. While you're there, look for any other RAM that someone else has thrown away - chances are its ValueRAM, too (hint: I have never seen a single ValueRAM DIMM work in any of my systems, so I avoid them like the plague - shame, since Kingston used to have such a good reputation).

Laptop freezes after installing new ram card.

Hi,
i recently upgraded my ram card on my toshiba c650d laptop. after installing the ram card the laptop began to freeze while in the desktop and then it could be resumed when Alt+Ctrl+Del was pressed.
and the laptop wouldn't wake from the sleep mode....
please help me this is urgent...as for im leaving my home country for studies.
thanks for the help in advance
Malith Ratnayake.

Hello Malith Ratnayake,
After changing the old RAM by the new one, this issue occurs?
If the issue doesn’t occur when you change back to use old ram, I think it is the RAM hardware issue.
Please contact the hardware manufacturer for better support.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

4 hrs later - Computer shut down after installing new RAM (mid 2007 Imac)

Mid 2007 imac and I installed new Ram. It worked for 4 hrs then the Imac shutdown. The pressed power button but no power. Unplugged and replugged the power cord and 3 beeps sounded. I am wondering if it worked for 4 hrs or so, then why did it would it fail 4 hrs later?
I am running the correct ram because in system profiler under memory - it said that everything was ok.
Any ideas?

or maybe the back tray wasn't tight enough?
I re-installed it now and so far so good.... I pressed tight and in an upwards motion. We'll see what happens

MacBook won't even turn on after installing new ram

I am using the 2010 MacBook (white 13 inch) I bought ram (two 2gb modules) and was going to install it. I removed my Original ram, but accidentally powered it on it the process (no ram was inside). I got a longed beep. I held the power button and shut it off. I then put the ram back in and it won't turn on. I don't hear any parts moving, no power, nothing. Yes I put the ram in right, an it's tight as can be. Its pushed in well. Help! I never put the new ram in!

The new ram doesn't fit. The laptop won't turn on with old ram. It worked before I removed it now it doesn't. It's I'm there tight so don't tell me to put it in with pressure because I did

After installing new RAM module macbook will not wake without re-start

Im having a little problem with my macbook. It operates normally and the new RAM appears to function as normal except when the computer is in sleep mode, it appears to sleep as normal but when the lid is raised or the power button depressed to wake the system up it will not do so without a full re-start. Any help is much appreciated. I have tried re-setting the PRAM and performing the usual maintenance functions from OnyX.
Thank you.

Did replacing the RAM fix the problem? I am also experiencing the same issue. The RAM works great when the computer is running but occasionally I cannot get the computer out of sleep mode and must reset the entire machine. Is the only cause of this a bad stick of RAM?

Problem after installing new ram

Just installed 1 MB of new ram. Everything appears to work with one very annoying problem that never existed prior to installation of ram. The problem is that the window moves slightly with any movement of the mouse. Not a great deal but enough to hide the menu at top of screen. I ran an Apple Hardware Test and all hardware passed. I changed the mouse but no cure. This happens with nothing running so I assume it is not software. It doesn't appear to affect the operation but it tends to make one sea sick with the up and down and side to side motion anytime the mouse is moved.
Shure would appreciate any help with this.
Doug

Open the Universal Access pane of System Preferences and turn off the Zoom option in the Seeing tab.
(27764)

Blank screen after installing new RAM

I have a 1.5 Ghz, 512 DDR SDRAM and it's starting to get sluggish so I bought 1GB DDR 333MHz RAM and replaced the samsung card inside. When I start up you can hear the chime but the screen is blank. When I put the old card back in it works again.
Anyone any ideas how to resolve or have I bought dodgy/cheap/wrong RAM?

Welcome to the Apple discussions.
Does the Samsung memory have the same label or BNO number on it as http://eshop.macsales.com/item/Samsung/27SAMSO1GB/ ?
Samsung is one of several brands that generally work fine in our Powerbooks.

Ipod dead after installing new software

Hi,
I downloaded updated software for my husband's 3g nano (last year's birthday present), so that I could install the Nike sport software (this year's birthday present!). The ipod software downloaded and installed fine, I didn't do the Nike one.
The next time he tried to turn on the ipod, there was no response at all.
The 'lock button' is not on.
Plugging it into a PC with a USB cable that works with my own ipod (same model)has no effect.
It appears to be completely dead.
It is only a couple of weeks out of warranty, bought 21/09/2007, fired up 29/09/2007 or later.
We have 5 ipods in the family at the last count, and mine is my third since the first one came out. We are definitely loyal customers, so I would hope that Apple might see it's way to stretching the warranty a fraction and sorting this out for us.
To whom can I appeal for help?
Regards
Angie

Wow. Thanks Mitch. When I saw the direction you were going, I thought that couldn't be the problem. But, I decided to remap the ipod anyway, and that was the problem. Thanks again

NB505-N500 Won't Start After Installing New RAM

I just watched a YouTube video showing how to replace RAM in a Toshiba netbook, but now my computer won't start even after I put back in the original RAM. On the parts label, it shows D3. I bought Crucial CT25664BC1067 2GB 204-PIN PC3-8500 SODIMM DDR3 Memory Module. Can someone provide some guida...
Thank you.
Solved!
Go to Solution.

You may want to contact Crucial.
There's a lot of talk of incompatibility in the one-star reviews on Amazon, which are about 14% of the reviews.
- Peter

[VIA] KT4AV seemingly dead after installing new sound card!

Hi all,
I recently fitted a new sound card to my system. following this my system wouldn't start - it wouldn't even get past POST (i'm getting the 4 red LEDs on the D-Bracket for "cpu incorrectly installed or damaged"). I've takenb the card out again, and no change. i've removed and reseated the CPU, and no change. I've even changed the CPU for another that i know is working fine, and (you guessed it) no change. I've also tried resetting/clearing the CMOS (nothing).
The main thing i should stress is that my system was 100% fine before this. never locked, rebooted or crashed.
My system is:
KT4AV mobo
Athlon XP 2800+ (and also a Duron 900 for testing, as above)
2 x Crucial DDR2700 512MB sticks
Radeon 9800 Pro (Saphire)
Q-Tec (yes - i know!) 550W PSU
Could the CPU socket have been damaged/burnt out or something?
Hope someone can help, cheers
Jon...

the first thing i will suggest is.... try another (better) PSU. borrow one off a friend. you may find that the board powers up again

Had to get new hard disk for my macbook. After installing snow leopard on new HD the computer only connects to free wifi at certain places and not others. Took it to genius bar (of course it worked find there!) they said it was fine. Not!

Had to get new hard disk for my macbook. After installing snow leopard on new HD the computer only connects to free wifi at certain places and not others. Took it to genius bar (of course it worked find there!) they said it was fine. But problem persist.

Hi there ricalimo,
I would recommend taking a look at the troubleshooting steps in the article below. If the issue is location specific, than you may want to save the article so you can perform troubleshooting when you are experiencing trouble.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
-Griff W.

HT201974 I just installed a wireless cable modem for a desktop PC and my MacBook Pro; After installing, I changed the password on the wireless connection at the PC but it is not being recognized by Airport as the new password.

I just installed a wireless cable modem for a desktop PC and my MacBook Pro; After installing, I changed the password on the wireless connection at the PC but it is not being recognized by Airport as the new password. Can anyone help?

Hi twinkytomes,
Welcome to the Support Communities!
The article below may be able to help you with this.
AirPort Utility 6.x: Password-protect your wireless network
http://support.apple.com/kb/PH5119
Cheers,
- Judy

MacBook Pro is slow after install new OS X Yosemite

My macbook pro is freezing after I installed
Yosemite
What to do?

Hi brn2win67,
Thanks for using the Apple Support Communities. I understand that you are experiencing performance issues with your MacBook Pro after installing OS X Yosemite. The following resource provides information if your mac runs slowly:
OS X Yosemite: If your Mac runs slowly
http://support.apple.com/kb/PH19031
- Matt M.

Installed new ram, computer wont start up

I installed 1gb of hynix ram. I tried setting it in different ways, but each time when i start up the computer it doesnt even get to the chime sound, the screen doesnt come on, my fan just runs loud and fast and nothing happens, but it starts up fine with out the ram. is there any hope of installing this ram?

Generally if your computer won't start up after you have installed new RAM, either you have purchased the wrong type of RAM, or it is a bad module.
As long as you are able to start up normally after removing the new RAM, and it is supported, it might just be a bad module. Contact Hynix to arrange for a replacement.

Macbook dead after installing new ram (1gb in each slot)

Similar Messages

Maybe you are looking for