Macbook display on a 40" LCD

is it possible? what do i need to buy? tv has hdmi inputs, everything except the 100gb processor, it is 80gb. please help!!
macbook   Mac OS X (10.4.8)  

If the TV has an RGB input, you can use an Apple Mini DVI->VGA adaptor, or if you can only connect through HDMI, you can use the Mini DVI->DVI adaptor, and purchase a DVI->HDMI adaptor.

Similar Messages

  • Macbook Display vs LCD Display

    How does my macbook display compare to a 1080i lcd screen

    The 1080 in 1080i is vertical resolution. Assuming a 16:9 widescreen TV, the resolution would be 1920 × 1080. The MacBook LCD's native resolution is 1280 x 800.

  • Small vertical lines when connecting macbook to a Samsung 37" LCD via HDMI

    Hi
    Just connected my macbook to a Samsung 37" LCD thru the HDMI port. Works a treat bar one issue...on non-moving images, colours which aren't whites or blacks, namely brighter colours, there appear small vertical lines. These seem to appear around the areas where there is a substantial difference between 2 colours (example the outline of a face against a lighter or darker background).
    Tried all the obvious things such as calibration, different resolutions etc but cant get rid of them...they dont seem to be there with moving images though and certainly not on mainly white displays such a the Google homepage for example............Any thoughts?
    Much obliged

    i have a samsung 52 inch tv and i have hooked up the vga connector to my pc input on my tv and went to pc input on the screen. all i keep getting when i start is the background but no icons or anything and i cant move the mouse on the tv. if i try to mirror the windows in the display i get a message that says mode not supported on the tv. any ideas. i don't have an external mouse to try

  • MacBook display resets to maximum brightness

    Hello,
    after attaching an external display (Cinema display) to my macbook it automatically resets the LCD display of my MacBook to maximum brightness. After detaching the external display the maximum brightness setting remains on my MacBook.
    Does anyone else have this problem? Does anyonoe know how I can preserve the brightness even when attaching an external display?
    Thank you.

    Hi everybody,
    has anybody determined a solution for this problem yet? My wife has a MacBook that she uses at her desk with an external display. Every time she plugs or unplugs the external display the brightness of the built-in display reverts to maximum.
    It's not really that big of a problem, we discovered that the brightness keys on the notebook itself always adjust the built-in display, even if it's not the primary display. The brightness keys on the external keyboard always adjust the brightness of the primary display (the external monitor in this case).
    But non-the-less it's still an irritation. It would be nice if it was fixed.
    Cheers,
    Jens Petersohn

  • MacBook Display Broken

    So last night I was in a car accident and my MacBooks display is broken. It is miss aligned and cracks in the display. What are my options does apple cover this? How can I get it repaired? Would my home insurance cover this?

    check out www.mbresq.com. I sent them my macbook when my screen got cracked, they mailed me a box sent it off got it back 2 days later or something with a brand new screen. The plus side is it only cost $440. Whoever said apple pays $400 for the lcd is full of it. I wouldn't doubt if they buy them for less than $100, and just gouge people who have broken screens. You can also buy screens yourself and attempt to replace it yourself, but that's a lot more work, and can be much more frustrating.
    Phil

  • New MacBook Display is Horrible

    I just got my new Aluminum MacBook last night, and it's going right back for refund this morning. The LCD is far inferior to my 1st generation MacBook display, and it's actually one of the worst displays I've seen on a modern notebook computer. I've been an Apple owner since I bought an SE/30, but Apple has screwed up badly here, and I find the new MacBook nearly unusable. (Please note, my current MacBook has a glossy screen; that level of glossiness is not the issue here.)
    The issues:
    1. The whole screen has an icky blue cast, and nothing in the display calibration settings will fix this. My old MacBook has a much more pure and natural looking white. I think Apple needs to work more on the LED back-lighting (or maybe they cheaped out on the MacBook LEDs).
    2. The blacks on the new display are washed out. This is obvious on the start-up animation (with the multi-lingual "welcome" animations against the Leopard nebulae in space). It's not just an issue with black images, however, this propagates to everything looking less crisp. And it's not an issue of adjusting brightness or screen angle. In fact, if you try to adjust the screen angle to get some reasonably good blacks, you get parts of the screen where you have a metallic or posterized effect. I saw this in the store displays as well, but I didn't realize that it would occur under normal viewing angles vs. extreme situations.
    3. Colors are not vibrant (nothing compared to my 1st generation MacBook). By not vibrant, I mean that different hues of blue, for example, are not distinct from one another. When I open Word, the splash screen has four different blue colors in the "feather" shape at the top right. On the old MacBook the blues are distinctly different and colorful, on the new MacBook they are much closer in hue and more dull. I think this is a result primarily of issues one and two above, but it may also have to do with other aspects of the inferior LCD on the Aluminum MacBook.
    4. The new MacBook screen should be called "mirrored" not "glossy". My 1st generation MacBook has a glossy screen. It's good. I rarely have an issue with visible reflections from it. The new MacBook is a constant battle. One major problem is that the screen needs to be pushed farther back to get reasonable contrast, but this angle directly reflects ceiling lights at the user. It's also so significantly more reflective than the previous glossy screen that it picks up windows and floor lamps and everything else a lot more easily. It's a mess.
    I hope this helps other folks avoid my mistake in seeking to upgrade from an existing MacBook. The new one is not any faster in day to day use (3D rendering excepted), and it has crippling issues with the display.

    Hey Araboston,
    Unfortunately, I personally don't see what you're talking about on my machine, however I want to help in any way I can. First off, it's possible you're seeing two different problems emerge. Using the mini-display port is a different technology than the mini-dvi port of yesteryear. I know from experience, when I hook up components to my hd tv using different connections (hdmi vs. component cable) I notice a difference. With the new technology you may have to re-calibrate your secondary monitor.
    As for the laptop screen, I'd be interested to know what lighting conditions you're using your laptop mostly in. Mine worked great in all conditions, right out of the box. But, I'd like to also note that when I checked, the battery count showed a count of 7. In real world terms, that means that the battery was discharged and recharged 7 times. I'm wondering if they do some sort of in-house calibration, that was possibly missed on your machine. The best test would be to take your macbook into the apple store, set it next to a display macbook and see if yours looks any different.
    Best of luck.

  • Connecting a Macbook Pro to a Samsung LCD TV. Can anyone tell me where to find information on what I need and how to do it?

    I want to connect my 2009 Macbook Pro to my Samsung LCD TV. I am afraid to go somewhere and ask and get bogus information so am putting it out here to see if anyone can help with the how tos and the types of cords/adapters I might need to purchase.

    You might profit from a visit to a Minneapolis Apple store. With a brand new Mac, I think they will be most helpful - not just with transferring files, but with other advice as well. And I strongly recommend you invest in a back up drive. The Apple folk can help with that as well.

  • User Contributed Tips in the MacBook (Original) The MacBook Display forum

    *The following User Contributed Tips are located in the MacBook (Original) > The MacBook Display forum:*
    <pending>
    *The following related tips are located in other areas of Apple Discussions:*
    a brody - Using a second Mac as a display for a first
    http://discussions.apple.com/thread.jspa?threadID=1587927
    Publish date: July 7, 2008
    See also User Tips Library

  • Macbook display sometimes fails to turn on after shut down (2008 2.4Ghz dual core 2 duo - 2GB DDR2 running OSX 10.6.8)

    I own a black macbook (early 2008 model) and for the past few months the display has occasionally (although recently more often) failed to turn on when booting. This only happens every one in four times after a full shut down. When I turn on the computer, I hear the hard drive boot and the fans start going, I also get a response in the white light indicator. When this occurs, I then have to press the on/off button to shut the macbook down, then press the button to turn it on again. Sometimes this works on the second try, but other times it takes 3 to 4 times turning it on or turning it off. Initially I thought it was a hard drive issue (and planned to purchase a new hard drive), but after connecting the laptop to an external screen, the desktop shows up (macbook display remains off despite unplugging or replugging external display). Is this a firmware issue? Or potentially a display cable issue? I'm leaning towards firmware since it only happens every 1 in 4 times. All parts in the macbook are original to 2008 and I've never really had any problems before.
    I've tried resetting by taking out the battery/pressing the on button.
    I also did a clean 7 pass wipe and reinstalled Mac OSX.
    Used TechTool Deluxe - found no issues.
    Booted computer and pressed D to perform a Mac hardware test - no problems found.
    Not sure what to do now...
    These two looked mildly like my problem: http://www.ifixit.com/Answers/View/68700/Not+booting+properly+after+10.6.8+and+F irmware+updates and another suggested replacing the display cable: http://www.ifixit.com/MacBook-Parts/MacBook-Display-Data-Cable/IF186-073?utm_sou rce=ifixit_guide&utm_medium=wiki_text&utm_term=if186-073&utm_content=product_lin k

    I own a black macbook (early 2008 model) and for the past few months the display has occasionally (although recently more often) failed to turn on when booting. This only happens every one in four times after a full shut down. When I turn on the computer, I hear the hard drive boot and the fans start going, I also get a response in the white light indicator. When this occurs, I then have to press the on/off button to shut the macbook down, then press the button to turn it on again. Sometimes this works on the second try, but other times it takes 3 to 4 times turning it on or turning it off. Initially I thought it was a hard drive issue (and planned to purchase a new hard drive), but after connecting the laptop to an external screen, the desktop shows up (macbook display remains off despite unplugging or replugging external display). Is this a firmware issue? Or potentially a display cable issue? I'm leaning towards firmware since it only happens every 1 in 4 times. All parts in the macbook are original to 2008 and I've never really had any problems before.
    I've tried resetting by taking out the battery/pressing the on button.
    I also did a clean 7 pass wipe and reinstalled Mac OSX.
    Used TechTool Deluxe - found no issues.
    Booted computer and pressed D to perform a Mac hardware test - no problems found.
    Not sure what to do now...
    These two looked mildly like my problem: http://www.ifixit.com/Answers/View/68700/Not+booting+properly+after+10.6.8+and+F irmware+updates and another suggested replacing the display cable: http://www.ifixit.com/MacBook-Parts/MacBook-Display-Data-Cable/IF186-073?utm_sou rce=ifixit_guide&utm_medium=wiki_text&utm_term=if186-073&utm_content=product_lin k

  • Use iPad as MacBook display?

    I have an '07 MacBook that took an unfortunate tumble and destroyed all but one corner of the screen. I was going to replace it over the summer with a Desktop and an iPad, but I don't want to get the Desktop now as I'm moving soon.
    So what I'm wondering is if it would be possible to hook the iPad up to my MacBook somehow and use it as a display so I can access my MacBook until I can buy a Desktop. I've seen a few topics about using the iPad as a split screen for the Pro but I'm looking for it to completely replace my MacBook display.

    Welcome to the Apple Discussions!
    Without a display it is difficult to configure any Mac. In the past did you ever enable screen sharing in the System Preferences so that you could view your MacBook from another Mac? If so you may be able to install an app that allowed you to use the iPad by first accessing your MB from another Mac over a network. But that would be difficult to do if you never enabled screen sharing.
    If perchance you could install on your MB the apps needed you might look at Air Display for viewing your MB's display from an iPad.
    Dah•veed

  • Qosmio X305 screen not displaying like my desktops LCD screen

    My screen seems to be displaying dull images.
    I'm kinda concerened, because it's an LCD screen, and its not displaying like my desktops LCD screen.
    I put the brightness up, and that helped to see the images better, but they still are not of the quality they should be.
    Is there a way to fix this? Or is that just how it is?

    Many Desktop LCD Monitors can get very bright, much brighter than most notebooks. So it may just be how it is. Perhaps you could go to the shops and compare it to other X300's on display.
    Try resetting or modifying the Contrast/Colour/Brightness settings in the nVidia control panel.

  • Macbook display malfunction

    Hello
    Late last week while merely surfing the web, I noticed some flickers on my macbook display. I had never seen those before. I've read about flickers on discussions here. Then over the weekend, I would start the computer only to have the display not light up instantly.
    The machine is on, and you'd have to hold the MB certain, slight ways (against a light) to see that it is operating. Sitting the MB certain ways would enable the display to actually light up to its normal brightness.
    But Monday the display would not light up at all. Again, the MB is operational, the battery is fully charged. But the display is nearly pitch black. Only squinting at it can you see any tiny, grainy vision of the desktop screen. I've tried, out of curiosity, things like extracting and replacing the battery, but to no avail. Might anyone here have any clue as to what's going on? I expect at the least to take it to an apple store/genius bar later this week. Any help/insight would be appreciated.
    MacBook   Mac OS X (10.4.6)  

    bad monitor cable or fault of monitor cable at logic board connector.
    There is no "fix", there needs to be hardware replacements installed
    Contact Apple for full diagnostic and replacing your monitor

  • MacBook Display Cleaning

    Hello,
    I recently purchased the iKlear Travel Wipes Kit to use in cleaning my screen. I followed the instructions exactly and did result in screen smearing which (after researching on these forums), was resolved by vigorously buffering the screen with the included Blue Chamois cloth in the kit.
    Now that my screen is back to normal, is there ANY other product on the market (particularly in Canada) which is available to clean the glossy MacBook display without the result of buffer-able residue streaking? A product which possibly just comes right off without so much effort as required with iKlear Polish?
    Thanks.

    I use to clean my screen using micro fiber streak free wipes.
    I try not to touch my screen, so what on the screen is mostly dust that is easily wiped out with dry cloth above.
    But for smudge oil or finger print on the screen, I damp the fabric lightly by spraying water to the fabric (never spray anything right to the screen). And wipe it clean.
    For some oily mark that water cannot erase, I either spray iklear or windex glass (not recommended but work well on my case) lightly on that damp cloth and wipe it one more time. And it makes my screen crystal clear as new.
    Good Luck.

  • MacBook display brightness will not adjust

    My MacBook display brightness is very low level, the F1 and F2 brightness keys bring up the transparent window and show brightness turned all the way down, but F2 does not increase the brightness. In Preferences, the display section shows the Brightness slider all the way to the top, and if I attempt to slide that down it snaps back to the top, and the actual screen brightness does not change from very low. I also have verified that the function keys are NOT set to lock out the brightness function, so pressing command and F1/F2 does nothing. So nothing from previous forums seems to apply! All other function keys operate properly (multi-window, volume, dashboard).

    OK guys, think I found a solution to this one.
    My girlfriend's mac had the same problem as yours, and I was motivated to fix it becuase I needed to use my mac for my dissertation and she kept stealing it!
    anyway, turn the brightness all the way down, press it up once and you will see the screen flash. do it again, really fast up and down up and down and the scree will stay on as long as you keep playing with the buttons.
    next, use this temporary fix to get into system preferences -> displays... and change the resolution to something considerably lower. then it stays on permanently. Not too sure about why this happens, maybe the mac can no longer handle that many colours or complexities?
    sod it. enjoy.

  • Macbook Display Darker In Corners

    I dont know if I am just being paranoid but I have started noticing that my 4 month old 2GHz Core 2 Duo Macbook display is slightly dark at the bottom two corners. Usually i dont notice it but at times when I see a movie in widescreen, the two dark spots become visible on the black border. Is that normal to do you think Apple will change the display? Its not a major problem but was wondering why it happens. This is my 3rd macbook as one was DOA in a week, other got screwed after I dropped coke on my screen (dont ask). Hence when it comes to Macbook, I am very paranoid
    Message was edited by: Tanya Palta

    I always keep my display with a completely black background.
    There's a noticeable gradation from the bottom to top of my screen as it gets slightly lighter. I see no evidence of differences at the corners. I tilted up, down, and sideways, but even the "gradation" effect is even. But it's an effect noted in a minority of models - particularly the widescreen portables.
    http://www.macintouch.com/reliability/macbooks.html
    Repair doesn't seem an option. But apparently you're not paranoid.

Maybe you are looking for