MacBook don't show the login/pin screen after iCloud lock

I locked my MacBook Pro From my iphone But when i try to open it it show the apple logo then it shutdown (without showing where to put the pin code) When I use opetion when booting it it ask for the password I put it right so I have the bootcamp (windows work) but when I choose Mac or recovery it show the logo then shutdown , Any help !?? :'(
I have the OS X 10.9
And Windows 8.1 on BootCamp

I don't know if this would work when you are dealing with a Filevault startup, but this outside thread contains the following suggestion. You would need an external USB keyboard and mouse:
Operate the MBP the same way as you would in "Clamshell" mode. The external display will automatically become the primary. I operate my MacBook that way when at home. I keep the lid shut on the MacBook, have an external USB keyboard and USB mouse attached. Turn on the MacBook, immediately shut the lid and the video will automatically go to my large external monitor.
You must be on AC power for this to work. Will not work on battery only.

Similar Messages

  • My sound has gone out and please don't tell me about PRAM because my MacBook keeps going to the login screen and I can't hear any start up beeps neither someone PLEASE help me

    my sound has gone out and please don't tell me about PRAM because my MacBook keeps going to the login screen and I can't hear any start up beeps neither someone PLEASE help me

    bcoady90 wrote:
    My guess is a loose connection.
    I suspect you are correct.  I would suggest you bring it to a repair facility that may have better diagnostic tools, preferably an Apple store genius bar.
    Ciao.

  • Installed new screen on macbook pro 15" and now it boots fine but doesn't show the grey boot screen???

    I recently installed a used but in good condition glossy display on my 15" macbook pro as mine the backlight was starting to have issues and there were some surface scratches on the screen. Anyway the screen works perfect except I don't get the grey boot screen when i start the machine up. You can tell the screen is on as you can see the backlight come on. But the screen doesn't actually show anything until it starts to go into OS X. not sure what the problem could be. I relize this is not a big issue but I am stumped on why it is doing this. Also maybe I am just crazy b/c I have dealt with the other screen for such a long time now but it doesn't seem like I am getting exactly the right colors and brighness on the new screen. I have calibrated it and all and like i said it might just be me. More concerned with the whole no boot screen issue. Anyone experience this before, and if so any solutions for me. Thanks.

    It's hard to diagnose but you do have a problem. Take it to an Apple store or AASP and have them diagnose your damage. And, no AppleCare does not cover user accidents. Check with your homeowners insurance.

  • My Macbook starts up, shows the screen saver, then immediately goes to sleep. I tap the spacebar, it comes back for a second, shows the tool bar and the hard drive icon then immediately "goes to sleep".  This can go on forever, on, sleep, on, sleep.

    My Macbook starts up, shows the screen saver, then immediately goes to sleep. I tap the spacebar, it comes back for a second, shows the tool bar and the hard drive icon then immediately "goes to sleep".  This can go on forever, on, sleep, on, sleep. I can only see the screen for maybe 3-5 seconds; not enough time to do anything. Someone did step on it, so I don't know if the problem is with screen or ??
    Thanks!

    Hello, Juniorjr2. 
    Thank you for visiting Apple Support Communities.
    This sounds like screen curtain may be enabled.  Screen curtain is a feature that allows display privacy.  To disable screen curtain while VoiceOver is enabled, you can three finger triple tap the screen to disable this feature.  You may need to press the home button once in order to process these steps.  If you wish to disable VoiceOver, see the link in the article below.
    iOS: Configuring accessibility features
    http://support.apple.com/kb/HT5018
    If the issue persists, try reaching out to us here. 
    Cheers,
    Jason H. 

  • I went to back up my iPhone4 and it said there was an update.  So I clicked  on 'update and backup' (or something close to that.)  It took FOREVER...way longer than usual. When it was done, it showed the power cord w/an arrow to iTunes.  ***??

    I went to back up my iPhone4 and it said there was an update.  So I clicked  on 'update and backup' (or something close to that.)  It took FOREVER...way longer than usual. When it was done, it showed the power cord w/an arrow to iTunes.  ***???  I restarted my computer and tried the whole process again and still...the power cord with an arrow to iTunes.  And I know this means I have to go to Apple and get another phone and will lose anything that wasn't backed up. Anyone else have this happen or have a solution so I don't have to do a restore???

    Reboot your computer.
    Disable your antivirus and firewall.
    Connect the phone to a USB port directly on your computer, not to a hub. If your computer is not a laptop and has ports on both front and back use a port on the back.
    If iTunes does not recognize the phone when you connect it see: http://support.apple.com/kb/HT1808
    If it STILL doesn't work open a command window and type:
       netsh winsock reset
    Then try again. (It seems that a recent Microsoft Windows update may have corrupted network settings; this restores them to the factory default).
    BTW, was there an error number associated with the failed update?

  • I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then the screen goes black, and "sleep" light pulses.

    I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then goes black. The sleep light pulses. From there, I can't turn it off normally. I have tried restarting the PMU. And I have tried unplugging the ac adaptor and removing the battery. From there I have plugged only the ac adaptor in, and it will begin to start but do the same thing once it shows the blue screen.
    I tried only using the battery (without plugging in the ac adaptor) and the same thing happens. I tried starting the computer while holding down CTRL, Option, P, and R, waiting to hear the start up chimes 3 times, and then holding Shift as it starts up. But I still get the black screen once I see the blue one, and the computer's sleep light pulses.
    I need something very important from this computer. And was able to start it last night. I did not shut down the computer, and was going to take it to a friends to use his printer today. The computer was in sleep mode in the morning.
    Thanks for any help!
    Gina

    What your describing could be a logic board or memory issue. 
    You did or did not hear 3 startup chimes?  If you hear 3 chimes when you start it, that would indicate a memory problem.  Try reseating the memory to see if that makes a difference. If you have 2 RAM cards, try one then the other in each slot. If you have 1 RAM card, move it to the other slot. Powerbooks can develop one bad slot.
    You may need to pull the hard drive out of the Powerbook, put it into an external case, then read it from another mac.

  • How to show the login user Id in the upper right corner of each page?

    Hi,
    I was wondering how to show the login user Id in the upper right corner of each page?
    thanks so much!
    cchu

    Cchu,
    The easy question first: applying a style to the welcome message. If you look at the page source, you'll see that #WELCOME_USER# is expanded to <div class="app-user">Welcome: DEMO</div> So to change the style of the message, you need to tweak the style of the app-user div in your CSS, or override it in a style block in your HTML header.
    Now, the tougher question: why the text is wrapping for you. And, really, without seeing your entire page, I can't give a full answer. But I'd suggest that what's most likely happening is that the table column you're putting it in is too narrow, so it's wrapping; try replacing the td tag with <td nowrap="nowrap"> This will force the column to be wide enough to display the full message, but might result in weird formatting elsewhere on the page (depending on what all is in your table).
    -David

  • Wen I turn on the my macbook it only show the aple icon and it show like it looding sometink or searching for someting and it never open.

    wen I turn on the my macbook it only show the aple icon and it show like it looding sometink or searching for someting and it never open.

    May need to grab a micro usb cable and restore via iTunes
    http://support.apple.com/kb/HT4367

  • HT201343 I just verified that i have an early 2011 Macbook Pro and the airplay icon does not appear.  i also have a 2013 Macbook Pro which shows the airplay icon.  do i need to enable airplay on my early 2011 or is there an update that is needed?  Confuse

    I just verified that i have an early 2011 Macbook Pro and the airplay icon does not appear.  i also have a 2013 Macbook Pro which shows the airplay icon.  do i need to enable airplay on my early 2011 or is there an update that is needed?  Confused.

    To check your model go to About This Mac (by clicking on the Apple icon, top left) and then select more info. If you wish to use mirroring you will need one from 2011 or later running OSX 10.8 or later. The alternative would be to use 3rd party software like Airparrot.
    About AirPlay Mirroring in OS X

  • Why is the Bitlocker PIN screen sometime blue and sometimes black?

    I am using Bitlocker on a Windows 8.0 laptop. I have noticed that sometimes when I boot up, the Bitlocker PIN screen has a blue background with white text and a white, full rectangle box to type the PIN in. Yet other times the Bitlocker PIN screen is black
    with white text and the "box" to type the PIN in is just a blank space framed by braces.
    This is not necessarily a problem since in either case I can put in my PIN and everything works correctly, I just want to know why are there two fundamentally different Bitlocker PIN screens and what causes one to appear instead of the other?

    By the way, when I booted up today, I got the normal Blue BitLocker screen. I have noticed that if I restart the computer from Windows I always get the black screen, but on a fresh/cold boot it seems random which one I get.
    Ok, I see the screen now, it mostly seems a fast boot causes this issue. Since the screen image depends on the behavior you shutdown the PC: "Restart" or fresh/cold boot. As a test, I suggest you disable the fast boot feature in Windows8 and
    check if it is the culprit.
    Type "powser button" in the search charm bar, then click "Change what the power buttons do", Untick the "Turn on fast startup (enabled)"
    Check whether the screen remains black screen. 
    Yolanda Zhu
    TechNet Community Support

  • Aplication WFO don't show the files recorded

    Hi,
    I am using QM 8.5.2 with UCCX 8.1 and CUCM 8.6 only  for compliance recording, my problem is that the aplication desktop WFO don't show the files recorded, and I have the folow error in the QM server.
    dbupload.log
    ERROR QMDB2001 SQM database request failed: The DB-API returned a DB error. SQL Statement returned false..
    dbproxy.log
    ERROR QMDB2001 SQM database execute failed: The INSERT statement conflicted with the FOREIGN KEY constraint "EventAudit_person_FK". The conflict occurred in database "SQMDB", table "dbo.Person", column 'id'..
    mana.log
    INFO  MANA0000 Running polling diagnostic...
    2012-08-21 11:52:31,218 INFO  MANA0002 Notification: <2012-08-17 12:20:17 QM1000 [CATASTROPHIC] Mana no pudo conectarse a Quality Management CTI Service (172.24.4.9): DESCON.>
    2012-08-21 11:52:52,328 ERROR MANA2017 Failed to send notification using SMTP.
    2012-08-21 11:52:52,328 INFO  MANA0000 Polling diagnostic finished.
    2012-08-21 11:52:52,328 INFO  MANA0000 Next poll at 2012-08-21 12:02:30
    Thanks.
    Regards,
    Luis

    Hi Luis,
    QMDB2001
    Text:SQM database failed: .
    Type:Error
    Add’l Info:An operation to the QM database failed, and data may have been lost.
    Action:Ensure that the QM database server is running.
    Check the configuration settings for connecting to the database.
    Confirm that the user has privileges to perform the operation.
    Ensure that the user has privileges to perform the operation.
    Repeatable occurrences of this, after checking all of the above, may indicate a software problem which should be reported.
    Please refer the below link for more information,
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/workforce_optimization/qm_2x/reference/guide/qm26ecd-cisco.pdf
    Hope it helps.
    Anand
    Please rate helpful posts !!

  • My ipod will only show the dead battery screen and wont taking a charge.

    my ipod will only show the dead battery screen and wont taking a charge on any of my sinc cords or my outlet charger. And I have checked that nothing is in the plug port blocking the electrodes. What do I do now?

    Put the device in DFU mode (google it) and restore via iTunes.

  • IExplorer don't show the cetificate

    Hello,
    I have signed an applet in a Windows NT, to run it with IExplorer, using cabarc and signcode in any Windows platform. It only give a timestamp warning. I validate if it's correct with a command prompt and it show the certificate well.
    But whe I try to run it in a client browser (IExplorer) the applet don't show the certificate to the client and consequently it give a Security Exception on its execution.
    It could be a classes problem??
    What's happening??
    Thank you.

    I've the same problem, How have you resolve it?.
    Thanks...

  • Show it when u click show it will show what ur writing and u can click D.S to don't show the pass

    Can Apple Make it when u write ur internet pass u can choose to show it when u click show it will show what ur writing and u can click D.S to don't show the pass

    Go to System Preferences/Display and check the box that says Reduce Transparency.

  • Is there any way under iOS7 to show the full home screen without the 3D band at the bottom reducing picture size?

    Is there any way under iOS7 to show the full home screen without the 3D band at the bottom reducing picture size? I want to see full pictures from my camera roll, not "special effects" from Apple..

    By 3D band are you referring to the Dock area where apps like Safari and Mail live? If so there is no way to remove this.
    Regards,
    Steve

Maybe you are looking for

  • I have problem after cleaning LCD on my SP U200

    Hi, I have the following problem with my U200. I routinely clean my monitor using foam LCD cleaner. But because of some reason the foam got inside the monitor, seems that it is between the trubrit and the LCD. Because of experience I believe that it

  • Drag and drop items to document librarys in outlook

    Hi guys, I've seen other post regarding this but there was no answer for the practice drag-and-drop e-mails or documents to documents librarys inside outlook ?? can someone help me pls ? thanks in advance

  • Embed font

    I believe app developers can embed fonts- as I have apps that work with fonts (not just pictures of fonts) that are not available on the default system of the iPad. I hope this capability will be offered to iBooks' authors, or alternatively, an abili

  • Smart Folder stopped working

    When I first installed Tiger, I created a Smart Folder to display all the Presentations on my Powerbook. A simple "Kind: Presentations" Smart Folder did the job perfectly, displaying all Keynote and PowerPoint presentations. Recently, this Smart Fold

  • How to realize configuration-values for applications,updateable at runtime?

    Hello community, i'm developing at a pilot-system for a new application on NW 71.CE in pure Java-Environment. The target-Application conists of different modules. Mainly out of many single Web-Dynpro-Applications and many different Java-Beans for bus