Macbook DVD drive repeats eject sequence even when empty

Giving an old macbook (first model, white, 2006) away to a friend. He wanted Windows7 on it (don't ask ) so I got a copy from him and installed. Decided to use the bootcamp of Snow Leopard above Leopard, since Windows7 wasn't released yet when Leopard was released. Still I was a bit ambivalent as I didn't know if it would be suited to the rather old hardware of the macbook. All seemed to go well but after installation of the drivers of the Bootcamp CD I ejected the dvd drive and it started acting weird. What it does now is it keeps ejecting the drive, whether there's a cd in there or not. When I inject a cd (or dvd, no difference), I have to wait for the eject/load sequence to play out since it's locking the cd drive in between. When the cd/dvd is in, the drive won't read it, instead it will rumble a bit and eventually (about 20 seconds) spit out the CD.
Seems like a rather small coincidence that the drive, after all these years, would fail at this exact moment in time.... thinking there's something else to blaim but not sure how to proceed. What are your tips?

Nobody have any ideas or suggestions as to what steps I might undertake to solve this? Anything is helpful, thanks!

Similar Messages

  • Macbook CD drive does periodic "seek" even when PC is asleep

    My Macbook will be "fast asleep", the power light will be slowly pulsating, the machine has been inactive for so long that opening the screen does not revive the PC, you actually have to touch the power button to revive it, yet (it is in my room near where I sleep) I hear it periodically do a "seek" on the CD drive - you hear the CD's seek motor whirr and then nothing. This will happen at what appear to be (but may not be) random intervals.
    Any idea why this is, and what (if anything) I can do to stop this behaviour?
    Thanks,
    Mike

    You'd be shocked at the amount of traffic that goes through your Mac even under the most benign situations.
    Frankly, it's difficult to diagnose this specific problem. If you're concerned about random traffic of any type on your system. a minimal investment in Little Snitch show you exactly what it is, and throttle unwanted traffic. Anytime something communicates to your computer, you'll see it.
    In the meantime, I'd go to Control Panel/Security/Firewall and click Allow Only Essential Services and see if the behavior persists.

  • My dvd drive makes an awful noise when inserting dvd, I have a macbook PRo

    My dvd drive makes an awful noise when inserting a dvd. Does that means it needs to be replaced?

    It's more like a grinding sound. I was trying to convert  the dvd with Mpeg Streamclip when it started , After that I tried with Handbrakes and got the same sound. I gave it  a rest and inserted another dvd and it was fine. Now I don't know what to do, looks like the drive is ok..

  • HP 550 dvd drive auto ejects randomly

    Hi
    i have a hp550 notebook running win xp with sp2
    the problem is that dvd drive keeps ejecting  randomly with or without a disk in the drive

    I have same problem. My new notebook is HP Pavilion dv6t Quad Edition just one month. When I turn on power, dvd drvie auto eject. It can not be closed. If put a cd inside. it run and read nothing.
    What I can do...
    Thanks.

  • My CD/DVD drive automatically ejects every disc I put in.

    Hi!
    I have an Mac Book 15" - Late 2011 / OX 10.9.2  8 Gig RAM AND 2.2 GHz Intel Core i7 Processor.My CD/DVD drive automatically ejects every disc I put in immediately. I can't figure out why it's doing this as till December 2013 it was doing fine? I had to reinstall OX and Maverics as my Laptop was lost and recovered and I had actioned erase all data.
    Does anyone have any suggestions?

    Check this FAQ*:
    http://www.macmaps.com/cdrfailure.html
    Also check this article
    http://en.wikipedia.org/wiki/Sony_BMG_copy_protection_rootkit_scandal
    If you suspect it could be the latter, you may just have to replace the optical drive, or add an external one that supports Mac OS X utility booting, and not use possible rootkit CDs again.
    * Links to my pages may give me compensation.

  • When I put in a DVD, the mac locks up, an image from the DVD stays on the screen even when the dvd is removed.  The only way to remove the image if to do a hard shutdown.

    When I put in a DVD, the mac locks up, an image from the DVD stays on the screen even when the dvd is removed.  The only way to remove the image if to do a hard shutdown.
    Is the hardware corrupt?

    Could you be a little more descriptive, does this happen with all DVDs? Please describe the type of DVDs you are attempting to use, commercial movies, blank DVDs, etc...

  • Help, DVD Driver keeps ejecting DVD and requesting a Blank, I insert a Blank and the same message keeps coming up, any suggestions ?

    DVD Driver keeps ejecting DVD and requesting a Blank, I insert a Blank and the same message keeps coming up, any suggestions ?

    Hi
    a. You are using Cheap media as Memorex, NoName etc DVDs - I only use Verbatim
    b. You use a DL-DVD or DVD+/-RW type of media - Old Macs can not use DL-DVDs - I only use DVD-R
    c. Your DVD-burner needs a cleaning - Cleaning DVD without liquid but the brush type
    d. Is there OK free space on Your Start-Up (Macintosh HD) hard disk - I never go less than 25Gb free.
    e. Can You describe the material used to create Your DVD
    - Video Codec/s
    - Photo file formats
    - Audio file formats
    iDVD can not use all but only a few of them - still it tries and then often fails
    Just to start by.
    Yours Bengt W

  • Dvd drive wont eject - using windows 7 - G50-70 i5

    Im having problems with my dvd drive.  Have seen a few similar posts on here but I cant get anything to work.  The drive did initially work, but now I have installed windows 7, it wont eject.  The drive can read discs.  When I press the eject button, the light comes on, and I get the usual noise of the drive, but it wont eject.  It will eject using a paperclip, but not using eject under my computer.  Ive installed the lenovo eject utility, but no idea how to use it, but I dont think that having to go into the bios everytime or to use a paperclip is acceptable on a new laptop.  Would be grateful for any tips to try before I send it back.  For example, where can you download a mat**bleep**a driver or firmware update? Ive searched but they dont seem to have a website.  All I seem to get is lots of utilities that want paying for downloading anything.  Many thanks for any help, Tristan
    Solved!
    Go to Solution.

    hi Tristan,
    Welcome to the Forums.
    AFAIK, when you press the eject button, it sends a signal to the logic board, and the logic board sends a function to the eject machanism to release the tray. From your observation, it's likely that there's a mechanical or other physical failure inside the ODD that's preventing the tray to eject.
    The Lenovo Eject Utility on the other hand is design for Thinkpads (haven't tested this on Ideapads units) and its function is the same when you right click on the DVD Icon and chooe Eject.
       - Sample image
    I recommend you contact lenovo and report your findings as you may likely need to send the unit for service.
    Support phone list
    More info:
    ODD - Mechanical Parts
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • My dvd drive wont read (or even accept the existense of cds) much less burn them. HEEELLLLPPP

    my dvd drive wont do alot of the things it is supposed to like burn cds, or even recognize them, also when I went to my profiler it says the drive doesnt exist. as far as I know the model is an  MATSHITA DVD R UJ 875. my computer will still read dvds, but if there is a cd inserted, then it makes some aggrivating noises and then spits it out, I know little to nothing about SERIOUS computer work, like firmware patches, or bridges or whatever the terms are. When I try to burn anything, it cycles almost burns, but then, like clockwork. the error messafe pops up that  there is an un expected error. I am at my witts end here is there any thing I can do to fix this problem, without spending money I really dont have right now? (I am going to school and it starts this thursdaty) or should I just get my SKS out and fix the problem with a Full metal jacket?  someone help. if need be my email is [email protected] Please help me if you can.
    Thanks all

    Try resetting PRAM…
    http://docs.info.apple.com/article.html?artnum=2238
    At times it helps with optical drive issues.

  • DVD Drive keeps ejecting!

    I have an HP Probook 4540s which i bought just a couple of weeks ago. The dvd-rom has suddenly started ejecting randomly, even though i havent used it at all since buying the notebook. Somebody please help!

    update windows, re-install or rollback drivers, and maybe update bios. If that doesn't work get a new optical drive.

  • Macbook just started sucking down bandwidth even when I'm not doing anythin

    Ok so in the past 2 days my Macbook has started to suck down bandwidth. apparently i'm downloading even when my computer is just sitting there. it's about 1 mg per minute. My hard drive is partitioned with Windows XP on one side, but I rarely ever use the XP side.
    Is it possible that I have a trojan or spyware or something on the Windows side running even if I'm not using that side?
    I've removed Limewire and BitTorrent from my system but that hasn't stopped it. I've run Little Snitch and iAntiVirus, but neither found anything. I ran spybot S+D on the Windows side but it only found a few things that i deleted.
    What could be causing this bandwidth suckage?

    the weather.com one is one of my dashboard apps
    resnet-172:~ Beth$ netstat -p tcp -W
    Active Internet connections
    Proto Recv-Q Send-Q Local Address Foreign Address (state)
    tcp4 0 0 resnet-172.30.209.35.resnet.rutgers.edu.53737 207.123.55.126.http ESTABLISHED
    tcp4 0 0 resnet-172.30.209.35.resnet.rutgers.edu.53652 www.weather.com.http ESTABLISHED
    tcp4 0 0 resnet-172.30.209.35.resnet.rutgers.edu.53641 207.123.47.126.http LAST_ACK
    tcp4 0 0 resnet-172.30.209.35.resnet.rutgers.edu.53640 207.123.47.126.http LAST_ACK
    tcp4 0 0 resnet-172.30.209.35.resnet.rutgers.edu.53556 xml.weather.com.http ESTABLISHED
    tcp4 0 0 resnet-172.30.209.35.resnet.rutgers.edu.53706 lga15s03-in-f104.1e100.net.http TIME_WAIT
    tcp4 0 0 resnet-172.30.209.35.resnet.rutgers.edu.53703 lga15s03-in-f104.1e100.net.http TIME_WAIT
    tcp4 0 0 resnet-172.30.209.35.resnet.rutgers.edu.53724 a96-6-69-115.deploy.akamaitechnologies.com.http TIME_WAIT
    tcp4 0 0 resnet-172.30.209.35.resnet.rutgers.edu.53725 a96-6-72-100.deploy.akamaitechnologies.com.http TIME_WAIT
    tcp4 0 0 resnet-172.30.209.35.resnet.rutgers.edu.53720 a96-6-76-20.deploy.akamaitechnologies.com.http TIME_WAIT
    tcp4 0 0 resnet-172.30.209.35.resnet.rutgers.edu.53719 a96-6-76-20.deploy.akamaitechnologies.com.http TIME_WAIT
    tcp4 0 0 resnet-172.30.209.35.resnet.rutgers.edu.53713 a96-6-76-20.deploy.akamaitechnologies.com.http TIME_WAIT
    tcp4 0 0 resnet-172.30.209.35.resnet.rutgers.edu.53704 vw-in-f100.1e100.net.http TIME_WAIT
    tcp4 0 0 resnet-172.30.209.35.resnet.rutgers.edu.53718 vx-in-f101.1e100.net.http TIME_WAIT
    tcp4 0 0 resnet-172.30.209.35.resnet.rutgers.edu.53714 yo-in-f154.1e100.net.http TIME_WAIT
    tcp4 0 0 resnet-172.30.209.35.resnet.rutgers.edu.53716 yo-in-f154.1e100.net.http TIME_WAIT
    tcp4 0 0 resnet-172.30.209.35.resnet.rutgers.edu.53712 yo-in-f166.1e100.net.http TIME_WAIT
    tcp4 0 0 resnet-172.30.209.35.resnet.rutgers.edu.53715 yo-in-f154.1e100.net.http TIME_WAIT
    tcp4 0 0 resnet-172.30.209.35.resnet.rutgers.edu.53717 yo-in-f154.1e100.net.http TIME_WAIT
    tcp4 0 0 resnet-172.30.209.35.resnet.rutgers.edu.53722 yo-in-f166.1e100.net.http TIME_WAIT
    resnet-172:~ Beth$

  • Cd/dvd drive keeps ejecting cd/dvd!!!

    My cd/dvd drive is going crazy. Soon after i put a cd or dvd in the drive, it spits it back out. it sounds as though it is trying to read the disc, but fails. My drive was working normal earlier today, then it went crazy?!? i am not too computer savvy...HELP!

    Like I said I was having problems with the drive called AppleCare they told me to do some things I already done they included...
    Resetting PRAM and NVRAM
    Shut down the computer.
    Holding down the Command(Apple), Option, P, and R and then hold the Power button simultaneously, and told me to do that 3 times and wait for 3 loud buzzing (or some odd sound I can't describe).
    Also Resetting System Management Controller (SMC)
    Was told to shutdown and disconnect the AC Adapter and remove the computer's battery after that I had to press and hold down the power button for 5 seconds(I did 10 seconds) and then release the button, then reconnect the battery and AC Adapter and to restart the system.
    I was asked to try the drive again and it did not work when I was talking on the phone with the person, they said they could not do any thing becasue I was out of warranty but I asked to talk to a manager or someone higher about all my problems with the MacBook and see if I could get a new unit and he said yes and put me on wait but when I was on wait I tried out the drive again and it worked again.
    I do not know if it good again for the long run or it fail and just because of that! This is one of my least trusted Apple systems, for having the plastic replaced, having a hard drive go dead, and having the AC adapter switched out for a different one, and now this drive. This is one odd Apple system!

  • DVD drive removed on Asus computer when updating itunes

    I want to delete and, reinstall iTunes because I am getting a blank screen when trying to access the iTunes store. My DVD drive was  deleted from my Asus PC before when doing an update to itunes. Anyone had this problem before. Happened a couple of years ago.

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.

  • Hard Drive Light remains on even when system is powered off

    HP xw8600 Workstation running XP SP3
    In the past couple of weeks I am getting a lot of blue-screen errors with varying error codes, mostly pointing to problems with the C: drive. But what troubles me is that my hard drive activity light remains lit constantly, even when the system is powered off. The only way to make the light go out is to physically unplug the power cord from the computer. As soon as I plug the power cord back in, the HDD LED lights up.
    I have Googled, Yahooed, and Binged this problem to death, and gotten nothing but pages and pages of why the hard drive would be busy when the machine is powered up. But powered down?
    I ran HP's hardware diagnostics (found no problems, it never does) and have even disconnected the hard drive and moved it to another identical box (we have about 25 xw8600 boxes) and the problem did not follow. The HDD LED on this box remains lit with the power off and no hard drives connected.
    I should note that the power light functions properly, I have checked the wiring and it's not backwards.

    Hello WAVYTV, The symtoms you describe sound suspiciously like a faulty motherboard.
    There may be a possibility that you could also have a faulty power supply.
    Please click the White Kudos star on the left, to say thanks.
    Please mark Accept As Solution if it solves your problem.

  • Brand new MacBook - DVD drive loads with clunk, clunk, clunk!

    Hi all,
    I have set up my new MacBook - very happy so far. This morning I went to load some software via the DVD drive and was shocked at the noise that was made whilst the DVD was loading into the slot and settling - at least three unusually loud clunks. The new iMac I have loads discs silently, so I was thrown by this noise. Does anyone else have this problem? It sounds like something is in the mechanism (there wouldn't be) and that something is about to break.
    This is two days old and this is the first time I have used the DVD drive.
    Thanks in advance!

    me too i got a wii (its the only other slot loading disk i have) its silent and pulls the disk in its self very sleek. like you im disapointed at the extreme noise of the loader but that maybe the price for the slim design? need to see if its the same on a macbook pro?

Maybe you are looking for

  • Opening & closing balance for Multiple Vendors

    Hi Friends, I have an issue. This is my code. *& Report  ZVEN_OPEN_CLOSE_BAL REPORT  ZVEN_OPEN_CLOSE_BAL. *& Report  ZVEN_OPEN_CLOSE_BAL TABLES:lfa1,bsik. TYPES: BEGIN OF ty_bsik,        bukrs TYPE bsik-bukrs,        lifnr TYPE bsik-lifnr,        aug

  • Officejet pro 8610 won't scan in color

    I'm using a Mac OS 10.6.8 and just connected my new HP Officejet Pro 8610.  It is only scanning in black and white.  I do not see a place to select for color (when you select copy you have that choice but not on scan).  It prints in color and makes c

  • Wfload erroring out (workflow, standalone, on 10r2 database on linux)

    I'm having problems installing workflow workflow 10.1.0.3 on my Ubuntu linux box, that is running an oracle 10 release 2 database. The Workflow configuration agent (that is started via this script: $ORACLE_HOME/wf/install/wfinstall.csh), claims that

  • Can't connect to DFS shares from machines not part of the domain

    I'm not sure if this is by design, but we can't connect to DFS shares from machines that are not joined to the domain.  We can't even map a drive using credentials of a domain account. Is that how DFS is supposed to work? 

  • Code 3 Device Error buring Blu-Ray

    Hello, I am having an issue with buring a Blu-Ray.  I am getting this error Blu-ray Error: "device error"' Code: "3" nOTE: "cREATEsTCsEQUENCE: fAIL TO WRITE m2s FILE Can someone help?  This problem has already cost me $10.