Macbook fails to see external HD

Hello -
A couple of days ago I was copying photos on my External HD. It stalled on one particular photo. iPhoto crashed. I made it Force Quit and restarted the laptop.
But when it rebooted it couldn't see the HD - and still hasn't.
Any advice?
Many thanks..

Try to unplugged the external, reset your PRAM and SMC, and plugged the external back in.
http://docs.info.apple.com/article.html?artnum=303319
http://docs.info.apple.com/article.html?artnum=2238
If the HD still not mounting, open about mac by clicking blue apple on the top left corner > about this mac > more info > firewire or usb, and see if the hd or the enclosure connected/detected.
Do try to connect your external to other mac to see it.
If the external is not mounted anywhere, maybe your external HD might failed.
Good Luck.

Similar Messages

Problem - new MacBook Air cannot see external HD

Hi, I'm hoping someone can help, as I have seen similar questions in the forums, but not with an answer that helps me solve my problem.
Ok, I have a new MacBook Air running Lion (bought last year), a MacBook Pro running Leopard which is approx 4 years old and a Windows Laptop. I use the MacBook Air for Work and when travelling (weekly with work), the MacBook Pro for home and managing my other apple devices (iPad/iPhone etc..). I no longer use the PC, but there are loads of files both work and home, I wish to keep on an external HD for use with both Apple Laptops.
So, the external HD used to work with the MacBook Air when I first bought it (a couple of weeks ago) and formatted it with the MacBook Air, but it couldn't be seen or used with the Windows PC. When I formatted it with the Windows PC, I could use it with the MacBook Air but could not write to the disk.
So I have now partitioned and formatted it with the MacBook Pro running Lion, but now the MacBook Air cannot even see the disk in Disk Utility.
My MacBook Air otherwise runs absolutely fine with no problems, and the MacBook Air is a critical piece of kit that I use on a daily basis to do my job. As such, I have no appetite for deleting any drivers etc... from the MacBook Air as it could originally see the disk and I do not want to make a mistake and cause myself problems.
So the question is, how on earth do I get the MacBook Air to see the drive again in Disk Utility? So I can do the partitioning and formatting there, this drive is of no use if can only be seen by the MacBook Pro. The drive is a portable USB powered Toshiba 1TB disk Part Number: HDTB110EK3BA.
Am going to wait for some suggestions, my next thought is to erase everything using the windows PC assuming it can see it, and then see if the Mac Book Air laptop can see it in Disk Utility... no other options left really.
I hope someone can help, otherwise I may be off to buy a new disk and could hit the same problems again!
Thanks
Alex.

http://www.phonenews.com/toshiba-acknowledges-macbook-woes-canvio-usb-3-0-hard-d rives-18699/
Toshiba Acknowledges MacBook Woes in Canvio USB 3.0 Hard Drives
By Christopher Price on December 27, 2011
Following tests conducted by PhoneNews.com, Toshiba has acknowledged an issue affecting their Canvio USB 3.0 hard drives. The issue prevents current-generation MacBook Pro and MacBook Air models from properly connecting and powering up the drives.
Read more to see our findings, and the resulting (ongoing) investigation by Toshiba.
We began our tests based on tips from readers like you, and went out and purchased five (yes, five) Canvio USB 3.0 drives, along with a brand new 2011 MacBook Air.
Drive problems happened immediately, and were relatively isolated to the MacBook Air. Of all the systems we tested on, we were only able to reproduce issues on a Sony VAIO laptop late in our testing, as well as a current-gen MacBook Pro.
Essentially, the drives failed to mount, and in most tests never even spun up on these systems.
The Canvio USB 3.0 hard drives have sat under many people’s Christmas trees, as they were hot sellers during Black Friday. Retailers like Office Depot slashed prices on the slim, 2.5-inch drives down to $79 for a 1TB hard drive. With coupons, Radio Shack was selling the 500GB model for a mere $39.
Canvio USB 3.0 drives tout on the box compatibility with USB 2.0 systems, including both Mac and PC. The advantage of a Canvio USB 3.0 hard drive for a MacBook owner lies in Thunderbolt. Purchasing such a drive today can achieve USB 3.0 speeds with upcoming Thunderbolt-to-USB 3.0 adapters. USB 3.0 mass storage was designed to be fully backwards compatible with USB 2.0.
To get to the bottom of the problem, we probed the five Canvio drives purchased, in an effort to better understand the issue. And, we were able to isolate the problem; the Canvio USB 3.0 drives draw more power than the USB standard permits. The drives were drawing, upon connection, slightly more than the five watts that the spec allows. And, the new MacBooks appear to promptly shut the device down because of this.
Why? Well, Apple can assert that this is to protect the MacBook Air/Pro from a malfunctioning USB device. However, the answer really lies in tablets. Apple allows iPad and MacBook to perform a hardware handshake, which then allows Apple devices to draw 10 watts from the USB port. This is why you can charge an iPad directly on a Mac, but not on a PC.
Apple does not want to allow rival tablet manufacturers (Android) to have the same access to Apple’s USB port. Hence, any device (like a tablet) that wants to draw even slightly more than five watts, is shut off from communicating with the Mac. We affirmed this by testing a powered USB hub. With a powered hub connected to the hard drive, and the hub connected to the MacBook, the drive instantly came to life, and worked without issue.
This creates a bit of an odd situation; Toshiba is technically in the wrong for making drives that technically breach USB specifications… but Apple seems to be the only manufacturer to enforce this aspect (as well as breach it with their own devices).
Toshiba, to its credit, has owned up to our issue, right down to our suggestion to them that a powered hub works around the issue. Quoting an official statement in response to our research:
Toshiba DPD has identified an isolated USB connectivity issue between the Canvio USB 3.0 drive and currently shipping MacBook Pro and MacBook Air laptops. The issue involves the MacBook Pro and MacBook Air being unable to recognize the Canvio USB 3.0 drive when connected directly to the laptop USB 2.0 port. Toshiba is actively working to remedy this USB connectivity issue. In the interim, Toshiba recommends MacBook Pro and MacBook Air users employ a powered USB hub to connect their Canvio USB 3.0 drives.
We have asked Toshiba if they intend to inform retailers to accept returns for affected drives, or if they will offer some form of refund program in the interim. Retailers such as Office Depot do not permit refunds on opened technology items, including Canvio drives. Toshiba has said are looking into that aspect of this problem, and will get back to us shortly.
In all, we spent a few hundred on hard drives, and confirmed the issue. Unfortunately, because it is a power drain concern, Toshiba will likely have to offer an exchange program to fix it. We seriously doubt that this can be fixed at the firmware level. Theoretically, it’s possible a USB cable replacement might be able to mitigate this issue however, so there is hope that Toshiba won’t have to recall a bazillion hard drives.
Update: As a follow-up, Toshiba has informed us that they have completed their investigation, and will replace affected drives.

Macbook can't see external HD connected to iMac

Hello,
I just bought a Macbook and set it up with my iMac on the wireless network. Everything else works fine, but my Macbook can't see the external drive that is connected to my iMac. I want to be able to back up the Macbook to the drive. I tried turning on file sharing on the iMac and adding the LaCie drive to the list of shared folders, but its still not showing. Is there something I need to change or configure to get it to show up?
Thanks

I believe this Airport update, released in the spring (2008) did enable AirDisk usage with Airport Extreme wireless devices:
http://www.apple.com/support/downloads/timemachineandairportupdatesv10.html
MacWorld: Update allows Time Machine backups on AirPort Extreme
http://www.macworld.com/article/132613/2008/03/airporttime.html
Unfortunately, it is Mac OS X 10.5 (Leopard) only, and I see form your stats that you are still on Tiger (10.4).
It will be interesting if Tadd's tip works though. Let us know.
Cheers!

Macbook no longer seeing external hard drive

I have an Intel Macbook running 10.6.7. Yesterday I had two USB devices plugged in, one of them being my external hard drive. I started to unplug the hard drive by accident and quickly plugged it back in. However, I think this has now resulted in my Macbook no longer recognizing that device. I have turned the computer off with the device unplugged then turned it back on and plugged it in again, but it still doesn't see that drive. I've also tried changing ports, which didn't help, and the computer is able to see other devices using both ports. Any help?

Unplugging the hard drive itself from its power source (it's one that needs to be plugged into a wall outlet) solved the issue.

Macbook Air not seeing external harddrive

I have a Seagate external drive I use to back up both my Mac desktop and Macbook air laptop. It's usually plugged into the desktop since that's non-mobile, but I unplug it and plug it into the laptop about once a month. It still works on the desktop just fine, the desktop recognizes it and is backing up to it as normal. But this most recent time I plugged the harddrive into my laptop, the laptop doesn't see it at all. Time Machine says it'll backup "when disk is plugged in", it's not showing up in the side of Finder, and it's not showing up in Disk Utility. I tried rebooting the laptop, nothing. I haven't updated the OS to Mavericks yet, though I just did on the desktop and it continues to read the external drive no problem.

Hi vberardo,
If you are having an issue with your external hard drive now connecting to your MacBook Air, I would suggest that you troubleshoot using the steps in this article -
USB and FireWire Quick Assist
Thanks for using Apple Support Communities.
Best,
Brett L

My second macbook can't see my external drive.

I have the following setup:
-a Macbook that is wirelessly connected to my home network
-Macbook Pro that is wirelessly connected to my home network
-a 500g HD connected directly to my Macbook Pro that I am using for Time Machine.
Initially, I was having issues with my Macbook Pro successfully completing a backup. My Macbook (which is not physically connected to my external HD) had no problems backing up. After a great deal of frustration, I decided that there may be some problems with my HD so I reformated and repartitioned the drive to a single drive with journaling. Fortunately, now my Time Machine works with my Macbook Pro but I'm having major issues with my Macbook.
For some reason, my Macbook can no longer see my Macbook Pro, nor my external hard drives I am using for Time Machine and a second external I was hoping to use to share my iPhoto library between the two computers.
(I'm worried that I've done so much that I may have caused the problems but don't want to undo anything for fear that I'll once again mess things up with the Macbook Pro).
For the Time Machine HD, I've selected SHARE. When I use Time Machine on the Macbook, the drive (which was at one time visible) is not there.
For the new External that I was using for iPhoto, I've Shared, selected Ignore Ownership, and even added my wife's name with Read and Write privledges. But the macbook still can't see either drive.
What is confusing me is that my Macbook can still SHARE the Macbook Pro's screen. Yet when I look at the drive it just says connection failed.
I'm new to Macs so I'm not familiar with setting up. I've just tried to use what I would do with a PC.
ANY help is greatly appreciated.

Welcome to the discussions forum Mightymice.
Networking with Vista is a "bag of hurt" as Steve Jobs might put it, but it can be done.
Is there a "How to" somewhere?
I'd recommend getting this book from David Pogue. He devotes pages and pages to this subject alone. Here is a Google excerpt. Enjoy!

Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS write

Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS read files. Copies that would take seconds from a Windows based machine never complete. I have to close the transfer or shut off the machine half the time. Worst computer I have EVER owned, crashes non-stop, constantly freezes, and seems like EVERY operation is more complicated with this thing. Literally, my 1997 Compaq was FAR MORE reliable and user friendly.

This is one of the messages I keep getting; The Finder can’t complete the operation because some data in -- File Whatever -- can’t be read or written.(Error code -36)
I have copied things to the hard drive in the past, but it has always been incredibly slow, and now just seems to freeze and fail

MacBook Pro 13 doesn't see external monitor

Hello!
Today I put my macbook with an external monitor to sleep. After I woke it up, the macbook can't see my external monitor anymore.
What can be the problem & solutions?
Thanks in advance!

Still need help. When I put my cable in the macbook the screen goes blue for 2 seconds and nothing happens, no image on the external display

Hard disk in mums macbook failed, bought a new one, formatted it first. Have tried starting it with every possible key and I either get flashing question mark folder or a cursor.

Hard disk in mums macbook failed, bought a new one, used sata adapter cable to format it for mac first. Connected it and have tried starting it with every possible key combination and I either get flashing question mark folder or a cursor. A disk is stuck in it so I can't boot from OSX, and yes I have tried every option of starting to try and eject disk but none work. HELP ME!

Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
      left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
      your Utilities folder. At the prompt enter or paste the following:
        /usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
If you have a 2010 MBP or later, then you can use Internet Recovery. Start by rebooting the computer. At the chime press and hold down the COMMAND-OPTION-R keys until a Globe appears in the upper part of the screen. This process can take upwards of 15 minutes to get connected to the Apple network servers. You should eventually see the utility screen of the Recovery HD. You may now go about the process to install Mountain Lion:
Install Lion/Mountain Lion on a New HDD/SDD
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
See Here: http://pondini.org/TM/1.html
And here: http://pondini.org/TM/9.html
Peruse the whole site. There is a lot of information there.

Job for httpd.service failed. See 'systemctl status httpd.service' and

Hello,
I am the problem. I change "/etc/httpd/conf/httpd.conf" to install php5 on apache.
sudo systemctl start httpd
Job for httpd.service failed. See 'systemctl status httpd.service' and 'journalctl -xn' for details.
systemctl status httpd.service
● httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since lun. 2014-08-25 12:19:31 CEST; 1min 18s ago
Process: 2208 ExecStop=/usr/bin/apachectl graceful-stop (code=exited, status=1/FAILURE)
Process: 2433 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
Main PID: 2060 (code=exited, status=0/SUCCESS)
août 25 12:19:31 creaprog apachectl[2433]: httpd: Syntax error on line 66 o...y
août 25 12:19:31 creaprog systemd[1]: httpd.service: control process exite...=1
août 25 12:19:31 creaprog systemd[1]: Failed to start Apache Web Server.
août 25 12:19:31 creaprog systemd[1]: Unit httpd.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
cat /etc/httpd/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/srv/http"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#Load php5 module
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# PHP settings
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Thanks, sorry my english is bad .
Last edited by Creaprog (2014-08-25 10:25:17)

I just noticed the exact same thing. It turns out that the httpd-ssl.conf file on my system is still the old v2.2 syntax, which means that the SSLMutex directive is still in there. This is an invalid directive after 2.2.
This is where things get interesting. At first, I simply thought I had forgotten to merge httpd-ssl.conf.pacnew after apache had been upgraded to 2.4. However, when I check my pacman.log, it appears that httpd-ssl.conf was never upgraded when apache went to 2.4 - (2.2.26-1 -> 2.4.7-1). There was never a pacnew file generated to be merged.
I took a look at the apache package via the abs and the "proper" httpd-ssl.conf is certainly in there, so why pacman never created a pacnew file is a mystery.
Anyway, to fix this: pull the httpd-ssl.conf from the apache package, either from your cache, using the abs and building it, or (I think) pacman may re-install it if you move the file to a backup location (not sure about this). Then merge your original httpd-ssl-conf with the new one.

I cannot find videos (not movies) that i have transferred to my macbook pro from an external hard drive, these files used to be on my windows PC!

I cannot find videos (not movies) that i have transferred to my macbook pro from an external hard drive, these files used to be on my windows PC. Photos and a few of the videos came over but i am missing the majority of the videos. Help please!!! I have tried omnidisksweeper with no success in finding them.
in my Usage it says i have over 40 gb of movies when i only have about 9gb which i can see using spotlight search. i really hope the other amount is my missing videos! these are videos of my kids as babies.

Read this post and do the migration again, putting the library in a portable shape first if necessary.
tt2

MacBook fails to connect to wireless network after sleep mode

My MacBook fails to reconnect to my wireless network after waking up.
After turning on my MacBook it establishes a decent connection to whatever wireless network I choose (mostly at home). When I close the lid and open it again the network connection is lost and is only reestablished after reboot.
Hopefully someone has a solution as this is very annoying.

Instead of a reboot go to your Wireless Menu icon and select "Turn Airport Off".
Wait a second and "Turn Airport On."
For me this has been a problem for about 2 years. This is much faster than a reboot!
Also see this thread - http://discussions.apple.com/thread.jspa?threadID=2383405&tstart=0
It's the same issue.

How to switch off internal macbook screen when using external monitor(s)

as far as i observed, adding external displays ( running different screens on them, not mirroring) to a macbook pro increases the gpu workload and with that comes temperature rise in the laptop and increase in ventilator noise - and probably increased hardware aging and risk of component faillure due to high temperature inside the laptop.
simply try connecting two external 27" screens and open some flash video on both of them. then run a temperature monitoring software and watch temps rise, compared to running same flash videos / demanding tasks only on one connected external screen or only on the laptop screen with no external monitor connected.
especially in mavericks, due to its increased background routines, such a set-up appears ever the more taxing, then again who does not love apple`s nice adds showing laptops with two 27” screens connected to it and the workspace vision they invoke....
i have seen temps around 100° to 102° celsius on a 13" macbook pro 2012 edition, which i would expect is territory where the cpu / gpu temp safety switches will trigger system shutdown any time soon ( hardware status before verified as fully in order by apple service and default osx installation)
imagine your anti-virus software starting some realtime content screening while runnign some demanding tasks already and the system shuts down easily (all such situation observed in reality)
(would be interesting to see how a retina display macbook fares with 2 external monitors running demanding tasks, considering the retina display already increased taxing for the gpu - any experience from users of such a setup would be very much appreciated as it will provide critical purchase decision intelligence for all of us envisioning a retina-book and two big screens adoring our desks...)
turning down the macbook`s built-in screen`s backlight may reduce power consumption but i have not seen any evidence that it switches off the gpu-to-screen feed and respective gpu load - it certainly did not prevent gpu, cpu, board, etc temps to rise to borderline levels.
so the key question here is, how to switch off the macbook pro`s built-in screen in order to avoid gpu cycles being wasted on that screen ( and the resulting heat developments) when working with big external screen(s) connected to the laptop ?

this thread talks about running several monitors as advertised by apple and running demanding task on them.
with the lid open, the keyboard offers a very efficiant heat escape vector, which is blocked when the lid is closed - this is a basic and commonsense insulation effect. this thread also mentions the use of temperature monitoring software and thus a repeatable test setup. the temps recorded were also mentioned. they rose when the lid was closed, the running task remaining unchanged. as far as i could track down the cpus in discussion will shut down around the 105 degree celsius range. i observed system shut downs when the system approached 103° celsius. not to mention that the fans will run loud well before that.
again this is on hardware checked and ok-ed by apple service.
the question still welcoming an expert answer: is there any way to switch off the built-in macbook monitor while the lid is open ?

MacBook won't recognize external disk for Time Machine

Help!
My husband now has my old MacBook (white, 2008). It's running the latest version of Snow Leopard.
He also has his old Mac Mini (PowerPC, not Intel). Its optical drive is failing, so I decided he could use it as a TM backup disk.
Last night, I connected it to his MacBook with a FireWire cable, convinced it to start up in Target Disk mode, wiped it clean with Disk Utility, and told Time Machine, "Hey, look, here's a disk for you!". TM immediately began a full backup, which completed successfully. It did a few more little "mini backups" (as TM does) while he was using the computer. When we went to bed, he closed the MacBook but didn't eject the Mini or turn it off.
When I looked at the Mini this afternoon, it was off. I figured it had shut itself down or whatever. I opened his MacBook and started up the Mini, but it doesn't mount and the MacBook can't see it in Disk Utility. (And yes, the very first thing I did was check the FireWire cable's connection, LOL. It's fine.)
So what just happened here? IDEK.
Thanks in advance!

A.Carlo wrote:
The Mini cannot boot up. Since you wiped out its operating system, it's not able to get up and running. It works only while in Target Disk mode, but rebooting it without holding down the T key to enter Target Disk mode pretty much means it's waiting for an operating system to load.
OMG, I don't know how I could be so stupid, because I totally know how Target Disk Mode works! Clearly, I cannot brain today; I have the dumb.
I connected a USB keyboard to it and booted up while holding down the "T" key, and it showed up on the desktop. TM is now backing up.
Thank you!

Macbook fails to see external HD

Similar Messages

Maybe you are looking for