Macbook Faulty Wiring - no startup?

The week my MacBook Pro went out of warranty, it would not recognize its harddrive. It would startup, but would get the "?" and not see the internal drive. I took it to the Genius Bar - no help there, they wanted to charge me for a new harddrive w/o even looking at the computer. Even though I own several Mac's over the last 10 years - I was out of warranty by a week and they could offer me nothing! I took the computer apart - and realized that the cable that plugs the internal HD to the laptop was poorly assembled and was shorting out by touching the aluminum frame. I taped it up, re-assembled, and everything is fine. Make sure to check this if you have startup problems. P.S. Not pleased with Apple regarding the cold shoulder.

Russ R wrote:
I have a MacBook Pro running 10.6.8 and no longer hear any startup gong.
You likely had the mute button pressed.
I have repaired the permissions and they all repair except the "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" which has been modifed and wasn't repaired.
don't worry about that, we all have it.
I have not reset the PRAM, I think I have reset the power controller.
Well do backup your users data folders (Music, Pictures, etc) to a external storage drive ASAP (in addition to TimeMachine if your only using that, for the "fresh install" method)
run through the list here, you may have a software issue and this will help sort of rule that out, then your looking at a hardware issue not discovered by the hardware test.
Step by Step to fix your Mac
Create a data recovery, undelete boot drive

Similar Messages

  • My MacBook won't start up properly, and I suspect it may be the result of a power surge due to faulty wiring in my apartment.  Is this the kind of thing that can typically be repaired, and if so, at what price?

    My MacBook won't start properly.  It seems to run, but the screen won't light.  I suspect the cause is a power surge due to faulty wiring in my apartment.  Is this the kind of thing that can typically be repaired, and if so, at what price?

    you need to bring it somewhere so it can be determined exactly what is wrong with it and then an estimate can be provided.

  • Early 2009 MacBook Air. On startup no keyboard or mouse me to login. Neither is the USB working so I cannot use an external mouse or keyboard either.

    Early 2009 MacBook Air. On startup no keyboard or mouse me to login. Neither is the USB working so I cannot use an external mouse or keyboard either. If I keep restarting the machine suddenly sometime I get mouse and keyboard control and I am able to login and work. After sometime though mouse and keyboard Control is lost again and the machine hangs.
    Lately another problem has cropped up. Now the machine starts up and seems to work for longer time but I have no 0 key and USB everything else is fine.
    What could be the issue

    1. Reset PRAM.  http://support.apple.com/kb/PH4405
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".

  • How do I set up airport on my macbook pro (wired with ethernet to cable modem) and my ipad2 to use ipad wifi?

    How do I set up airport on my macbook pro (wired with ethernet to a cable modem) and the wifi settings on my ipad2 to enable the use of wifi on my ipad?

    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8156.html

  • My macbook pro went from startup screen to grey vertical stripes

    my macbook pro went from startup screen to grey vertical stripes with a bit of flashing.  Force quit twice and it is still doing it.  Had a bit of problem last time I started it with flashing screen, but it settled.  After leaving it on screen went black (as usual) and on waking had desktop up but continued to flash.  Any suggestions?

    Hi there Lochside,
    You may find the troubleshooting steps in the article below helpful.
    Apple computers: Troubleshooting issues with video on internal or external displayshttp://support.apple.com/kb/ht1573
    -Griff W. 

  • TS1365 My MacBook Pro will not startup.  At all.  The suggestions from Apple Support are not helping.  At all.  Someone help?!?

    My MacBook Pro will not startup.  Its not responding at all.  Does anyone have any suggestions on how I can correct this?

    HI Catherine,
    First, make sure it it shut down by holding down the power button for 5-10 seconds. Plug in the power adapter. Press the power button and hold down the shift key to see if you can start in Safe Mode.
    If the power adapter and/or battery are known good, the next thing I'd check would be the RAM to make sure it is securely seated. If batt and/or power adapter are questionable, then you'll want to find one or both and try them out; if you don't know someone with a similar MBP, this might be most easily accomplished by making a free appointment at an Apple Store "genius" bar.

  • My macbook pro will not startup, startup disc is full

    my macbook pro will not startup, startup disc is full

    Freeing Up Space on The Hard Drive
      1. See Lion/Mountain Lion/Mavericks' Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Also see Freeing space on your Mac OS X startup disk.
      5. See Where did my Disk Space go?.
      6. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
    If you are no longer able to boot your computer, then the drive is too full and has become corrupted. You may be able to repair it using Disk Utility on your Installer DVD:
    Repair the Hard Drive and Permissions
    Boot from your Tiger Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If this doesn't work, then you will have to erase the drive and install OS X from scratch. From the Tiger installer disc you will choose the Erase and Install install option.

  • MacBook Pro will not startup, cursor spins forever

    MacBook Pro refuses to startup no matter how long I wait for the spinning cursor to finish. I suspect hardware, because the last successful startup generated some strange bursts of static as it started up.
    I've tried a few successive startups all with the same result. The very last time I held down the "D" key but no diagnostics ever appeared to run.

    If I bought OS from apple store, can I just reload onto the new disk, plug it into bad machine and then select it with opt/alt key at power on?
    Yes.
    The Mac will boot just as easily from an external drive, so if you have an enclosure, you could put your spare drive there initially, or swap drives immediately if you prefer.
    The rub is: if your MacBook is older than about 2011, it needs a Recovery_HD to get the re-download.

  • My macbook started crashing on startup. The startup tone wavers. I got it going with the option start keystroke. Is this apt to be software or hardware? I ordered new system software to see if a new install will solve.

    My macbook started crashing on startup. The startup tone wavers. I got it going with the option start keystroke. Is this apt to be software or hardware? I ordered new system software to see if a new install will solve.

    when you install the disc, do it with the machine powered off. Place the disc in the the slot, push it in while holding the power switch tp poer it up, while holding the "C" key down till the gear starts spinning. After the gear starts spinning you can release the C key and wait. This takes much longer than normal longer, then create a new account. Be ready to wait.
    USE YOUR ORIGINAL INSTALL DISC!

  • When I try to start up my macbook, it makes the startup noise, but won't go any farther than the white/grey screen. I've tried the commands and nothing has worked. Please help

    When I try to start up my macbook, it makes the startup noise, but won't go any farther than the white/grey screen. I've tried the commands and nothing has worked. Please help

    Hey marleyrose,
    Thanks for the question. I understand that you are experiencing issues with your MacBook. The following resource may provide a solution:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    Thanks,
    Matt M.

  • Hello everyone i have macbook air, hello everyone i have macbook air and my startup disc is full i checked everything and and find out that all space is of OTHER and i dont know what is it and what i have to do with that

    hello everyone i have macbook air, hello everyone i have macbook air and my startup disc is full i checked everything and and find out that all space is of OTHER and i dont know what is it and what i have to do with that

    First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    If you're using Time Machine to back up a portable Mac, some of the available space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
    To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • Help~My 2012 macbook pro won't startup

    Help~My 2012 macbook pro won't startup, it just the black screen. I tried to reset the SMC,but doesn't work.
    I still in the warranty, if I need to replace the parts, do I need to charge for the replace? Thank you~!

    Warranty repairs are ALL FREE! 

  • After updating to Lion my macbook pro does not startup, it is stuck to the grey apple screen

    After updating to Lion my macbook pro does not startup, it is stuck to the grey apple screen

    See Here for Troubleshooting Grey Screen on Startup:
    http://support.apple.com/kb/TS2570

  • Macbook air locked at startup with keypad and touchpad

    How to unlock a Macbook Air stuck at startup screen with with key and touch pads unresponsive?

    Welcome to the Apple Support Communities
    If your MacBook Air is locked, hold the Power button until the computer turns off, and then, tunr your MacBook on again

  • My 13" MacBook Pro freezes at startup

    While using Firefox, my Macbook pro frooze about 2 days ago. The screen was only showing the multi-colour spinning circle.
    Pressed [Command + Option + Esc] to force quit. No response
    Pressed Power Button for 10 sec.Power OFF
    Again Pressed Power Button, the MacBook Pro freezes at startup, the MAC makes the startup music, enters a white Screen and is stuck there. There is a light clicking noise continously heard.
    Followed instructions to RESET SMC.
    1. Power OFF.
    2. Press [Shift + CNT + OPT + Power Key] and release at same time.
    3. Power ON.
    There was no response.
    Attempted multiple times to switch-ON and OFF MAC-Book. No response
    Attempted RESET SMC multiple times. No response.
    Then suddenly when I gave up, it unfreeze after 15 minutes and enters the login screen.
    Did a normal shut-down and power up. It was OK.
    Then, ran the Firefox in debug mode and disabled the plug-ins.
    It was stable for a 2 hours.
    Then again, got the spinning colour circle.
    So, took it to the service center last afternoon here at North Point, Hong Kong. The engineer there instructed me to backup the hard-disk and recover the CD.
    Brough the machine back to my home.
    Since the spinning colour circle would not stop, powered OFF the device.
    On POWER ON, the screen freeze. Just like the first time.
    Tried RESET SMC, Nor esult. Left the device power-on for an hour. No result.
    Then, inserted the recovery CD. Powered OFF the Macbook Pro. Powered ON  and pressed "C" immediately. No response. The CD is now stuck inside the MACBook Pro.
    Still have the white Screen at Power-On.
    Advice how to solve this problem

    Disconnect all peripherals from your computer. 
    Troubleshoot the spinning beach ball
    Common symptoms of a dying hard drive
    Hard drive is making a clicking, whirring, grinding, ping pong ball noise or any other type of unusual noises.
    Hard drive is not spinning.
    Computer is not recognizing the hard drive.
    Sluggish loading of applications.
    System freezes and hangs.
    An interesting site - Hard Drive Sounds by drive manufacturer.
    Mac OS X: Starting up in Safe Mode
    Apple Portables: Troubleshooting the slot load optical disc drive

Maybe you are looking for

  • Brighten Quicktime movie in slide

    Is there anyway to brighten a quicktime movie that is set in a slide? The adjust window does not work with a movie that has be inserted and quick time will let you adjust brightness, but not save the movie with the adjustments. Any ideas would be wel

  • Mapped drives automatically disconnected

    Hi, Having a bit of an odd issue with a Windows 2012 R2 server mapping drives to a Windows 2008 R2 in a RDS environment. I have setup the mapped drives in GPO with the replace option and reconnected ticked. When I login with a user account, the drive

  • GETVPN: Cisco 3925E as a Key Server for 1500 GMs

    Hi, In a MPLS-VPN scenario as a private network for a client, they want to encrypt all their data traffic. GETVPN is the chosen encryption solution. They have 1500 branch offices, and 2 CPDs. We plan to use two Cisco 3925E as Key Servers, one in each

  • Setting up of WF - BATCH for invoices released through workflow

    Hi all, i have set up the standard workflow for the Invoice Park and post which is working perfectly for the invoices. From the inbox the invoice is released by executing the work item. when i check the invoice document, the document is not getting p

  • Problems loggin in on new install

    Calendar 5.1 on solaris 9 The logon screen comes up fine but when I try to logon I get a page cannot be displayed error. My URL for logging on is http://172.16.128.77 After the failure the URL changes to http://172.16.128.77/login.wcap I have tried b