MacBook for field-/location audiorecording (film & video)
Searching for tips about a recording setup for field/location use. My purpose is to record 4-5 wireless + 1-2 boom mikes in the field. The ability to timestamp files by incoming TC would be a strong plus. Also syncing to the cameras sync/blackburst videosignal.
Currently using a 4-channel ENG-mixer sending 2 tracks directly to the camera. Feel that 4-track DAT is stable and sturdy, but way too expensive.
My thoughts about this is a MacBook (not purchased yet!) and a Metric Halo I/O 2882 firewire interface (yes, I got this one!). Recording software could actually be anything - this is just for raw recording - no editing/mixing/plugs. Recording will be done in 24-bit/48kHz mode. No more than 10 tracks simult. This seems to me to be a rugged setup, but I still got no TC reading option (?!?). Any tips? Is the MacBook sturdy enough to bring into cold and rainy weather, dusty fields and warm synny days?? Any experiences?
it too have been eyeing boomrecorder, or its more expensive and more feature / cluttered? competitor metacorder. you can dedicate a track for LTC timecode or if you are running with a camera that does not have TC, you can even run you Mac in free run TC and use it as a "slate" in front of the camera, as it displays numbers, scene, take, etc... it syncs by continuous LTC timecode feed, but if for any reason it loses sync, it will freerun until sync is regained.
for field recorders, however, do you need it portable, as in rigged onto a harness/bag, or is it going to be carted? AC powered or DC powered?
The MH 2882 and a MacBook/Pro would be inherently DC powered, and a viable solution. I personally strap everything up into a harness and wear it on my chest, so Apple does not have a computer with an appropriate form factor for me to run boomrecorder on. To bad, because that would solve all of my needs.
The next best things seems to be the Sound Devices 744t, which supports any standard 2.5" hard drive, flash card, and supports simultaneous recording to both formats for security. BWF, TC in and out, 4 drives, which is fine by me. in your case, you would have to mix several mics to tracks, and personally I would be more comfortable to track all mics to their own tracks for more flexible editing in post... also you'd have to bring some external gear to the mix since i think the sound devices only has 2 built in mic pres.
I wish that Apple would come out with something like the Sony UX1. only downside is that it does not have firewire, except on the optional dock, and it only runs XP, so no boomrecorder or metacorder. come on apple, don't make us wait anymore for a tablet or UMPC killer!
Similar Messages
-
Field-/locationrecording for film & video
Searching for tips about a recording setup for field/location use. My purpose is to record 4-5 wireless + 1-2 boom mikes in the field. The ability to timestamp files by incoming TC would be a strong plus. Also syncing to the cameras sync/blackburst videosignal.
Currently using a 4-channel ENG-mixer sending 2 tracks directly to the camera. Feel that 4-track DAT is stable and sturdy, but way too expensive.
My thoughts about this is a MacBook (not purchased yet!) and a Metric Halo I/O 2882 firewire interface (yes, I got this one!). Recording software could actually be anything - this is just for raw recording - no editing/mixing/plugs. Recording will be done in 24-bit/48kHz mode. No more than 10 tracks simult. This seems to me to be a rugged setup, but I still got no TC reading option (?!?). Any tips? Is the MacBook sturdy enough to bring into cold and rainy weather, dusty fields and warm synny days?? Any experiences?it too have been eyeing boomrecorder, or its more expensive and more feature / cluttered? competitor metacorder. you can dedicate a track for LTC timecode or if you are running with a camera that does not have TC, you can even run you Mac in free run TC and use it as a "slate" in front of the camera, as it displays numbers, scene, take, etc... it syncs by continuous LTC timecode feed, but if for any reason it loses sync, it will freerun until sync is regained.
for field recorders, however, do you need it portable, as in rigged onto a harness/bag, or is it going to be carted? AC powered or DC powered?
The MH 2882 and a MacBook/Pro would be inherently DC powered, and a viable solution. I personally strap everything up into a harness and wear it on my chest, so Apple does not have a computer with an appropriate form factor for me to run boomrecorder on. To bad, because that would solve all of my needs.
The next best things seems to be the Sound Devices 744t, which supports any standard 2.5" hard drive, flash card, and supports simultaneous recording to both formats for security. BWF, TC in and out, 4 drives, which is fine by me. in your case, you would have to mix several mics to tracks, and personally I would be more comfortable to track all mics to their own tracks for more flexible editing in post... also you'd have to bring some external gear to the mix since i think the sound devices only has 2 built in mic pres.
I wish that Apple would come out with something like the Sony UX1. only downside is that it does not have firewire, except on the optional dock, and it only runs XP, so no boomrecorder or metacorder. come on apple, don't make us wait anymore for a tablet or UMPC killer! -
I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work? I understand that using a USB port connection is not fast enough for video editing. I read somewhere the G Drives don't connect well to MacBook Pro.
thanks
larryI doubt this can be relocated or moved so you might want to just repost in the macbook pro area.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
Can you afford a new Thunderbolt case and cable? any case with FW800 is going to be slow 72MB/sec and less, and any new 1TB drive is capable of 75MB/s minimum up to 125MB/sec.
Thunderbolt storage can of course when setup properly reach 100's of MB higher using multiple drives.
Use what you have for a system backup or for secondary backup storage.
you might be able to take the drive - most cases allow you to open and swap drives - and use this:
G-Technology 1TB G-DRIVE mini High-Speed Portable Hard Drive
or this:
http://store.apple.com/us/product/HB137VC/A/g-technology-4tb-g-raid-professional -high-performance-dual-drive-hard-drive?fnode=5f -
I have consolidate my folders related to the video I am in the progress of working on. Premiere elements does not follow their new location. How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project
This is the Photoshop Elements forum, not the Premiere Elements forum, located here:
https://forums.adobe.com/community/premiere_elements
When you open the project, it should ask you where the first file is located. After you tell it where it is, it should be able to find the rest of them if they are located near the first one. Then save the file. If you move the files again, you will have to relink them again. -
I am 12 and want a 13 inch Macbook for video editing and stuff I cannot do on my iPad.
I need a Macbook for video editing and stuff I cannot do on my iPad (flash web browsing, iMovie or Final Cut Pro for YouTube, small games, photoshop, Reaktor 5, etc). I was thinking of buying the MacBook Air 13" refurbished intel core i5 for $999. I can pay up to $1,300 so I was thinking of getting the 13" MacBook Pro with retina display refurbished intel core i5 for $1,260. But then I couldn't buy many accessories or AppleCare. I do not really want to buy the non-retina MacBook Pro because it is not as portable and I am only 12 but I don't know much about how heavy it is because there is no apple store where I live but this is why I came here. So which MacBook should I buy? (I am probably going to wait until the new MacBooks in June 2013)
Hilary:
Welcome to Apple Discussions.
Congratulations on your upcoming graduation and the really wonderful gift you anticipate from your parents. Unfortunately, I am unable to give you information about upcoming Apple products or promotions, as I honestly don't know.
All my purchased music, and games, and videos, etc are on the computer I am currently using. Is there a way to transfer all of it to my new MacBook I will be receiving?
If the computer you are currently using is a Mac, yes, it can be transferred. One of the difficulties with the new MacBook is that it does not have any firewire ports, which will make networking a bit of a pain, but it can be done. Post back after you have your new computer with specs and we will give you directions on how to do it.
And are they going to make a new Macbook? So should I wait?
While I do not have any specific information about upcoming products, it is fairly certain that Apple will be coming out with new products. Of course this is a continuing process so you can be waiting for a long time. I would, personally, go ahead and get one now, and that should certainly see you through college. By then who know what wonderful products will be available!
Please do post back with further questions or comments, if you have any.
cornelius -
I have just bought a MacBook Air and i cannot play videos from the internet as it asks for a flash player to be installed i try to download Adobe flash player and it will not allow me to do so?
Ziatron is correct that Flash does not work on an iPad, but it does work on a Mac. See Adobe Flash Player 11.2.202.160.
-
Best MacBook for Creating Video
I need help choosing the best MacBook for creating sports videos using either iMovie or Final Cut. I currently us a Mac Mini but I want to purchase a laptop to be more mobile.
Any layer may be replaced with new footage by simply selecting the layer you want to replace in the composition, then selecting the new footage in the project panel, then holding down the Alt/Option key and dragging the new footage to the composition.
If you want to automate the process of replacing footage you'll have to use a script.
If you want to use a project as a template then simply copy the template file in it's folder and paste it into a folder that contains the same structure as the template. IOW, the folders should look like this:
Template Project
>template.aep
>Footage
New project
>copiedtemplate.aep
>Footage
Your footage has to have the same filename as the original template project.
You can also save an AE project as a template (aet) project. That's what they are doing on siges like Video Hive. The template isn't easily overwritten so it maintains the work. Then you simply add your footage using the first technique that I talked about. -
LSMW for functional location address fields
HI Folks,
I'm loading functional location thru LSMW Direct input method. I coudn't able to see any structure relation for address fileds on functional location. I have mapped the IBIPFLOC for functional location but it doesn't have any address fields. So how to load the address fields of functional location thru LSMW direct input method. Thanks in advance.Hi Praveen,
You can create a separate LSMW for this or you create a LSMW for FLoc upload along with the address details. I don't think this is possible with the standard program you have chosen.
Regards,
Bala -
I watched a video on my iphone, and it worked fine.
I wanted to watch it on our MacBook for sound and clarity, and every time I accessed it, it locked up. To the point that the only solution was holding down the power button.
Everything else worked, and I could freely enter information and open other Facebook entries, but when hitting the "play" button or clicking on the video it immediately bought up the spinning beach ball, and would never clear. Any solutions?Did you try viewing the video in a different browser? Firefox or Chrome maybe?
-
I need help for how to upload a video on youtube when it is a quicktime file but how i change it to a streamable format in order for it to not take as long to upload, how do i do this?
I have the same issue. If you are exporting from iMovie version 10.0.1, I run into the same issues if I export directly to YouTube or if I export to file then upload to YouTube.
Google's help file doesn't properly address this problem and thier help is also out of date. In talking to a support rep at Apple, they said the export to YouTube should just work or the exporting to a file then uploading otherwise it's an issue for Google support.
If someone can post a solution that works (is a streamable format - which is different than the format that YouTube accepts as it will accept many formats but take a long time to process them), I'd be interested to hear also.
Thanks,
Rob. -
I have a football game recorded on a DVD+R disc that I was trying to view on my MacBook using DVD Player. The video comes onto the screen, but immediately freezes, and then disappears. An error message comes up saying that DVD player unexpectedly quit. My MacBook operating system is Mac OS X, version 10.5.8. DVD Player is App version 5.0.3, framework version 5.0.7.
However, the DVD+R works on both my Dad's and my brother's laptops. My Dad's laptop is an iBook G4 with Mac OS X operating system, version 10.3.9. The DVD Player is version 4.0. My brother's laptop is a MacBook Pro with Mac OS X operating system, version 10.7.2. The DVD Player is App version 5500.26.1 and framework version 5.5.0. The DVD+R plays fine on their laptops, but will not play on mine.
AnthonyLao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands. -
Extra hardware interface for transmiting both Audio and video to client ??
hi i m doing e-learning project. i have to capture video from webcam and voice from headphone and send to client.
but my code is working fine for either one at a time.
DO i need some extra hardware interface for Transmitting both Audio and video to client im using code AVTransmit and AVReceive found from this site only
After running TX
i give dsound:// & vfw://0 in Media Locater only sound is received and no vedio
and when i give vfw://0 in Media Locater only live video is transmited.
im using JMF1.1.2e.
if any one know the method to run or cause of it plz reply me soon. i will be very thankfull
transmiter/server side code .first run TX on server
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import java.net.*;
import java.util.*;
import javax.media.rtp.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.border.*;
public class Tx extends JFrame implements ActionListener, KeyListener,
MouseListener, WindowListener {
Vector targets;
JList list;
JButton startXmit;
JButton rtcp;
JButton update;
JButton expiration;
JButton statistics;
JButton addTarget;
JButton removeTarget;
JTextField tf_remote_address;
JTextField tf_remote_data_port;
JTextField tf_media_file;
JTextField tf_data_port;
TargetListModel listModel;
AVTransmitter avTransmitter;
RTCPViewer rtcpViewer;
JCheckBox cb_loop;
Config config;
public Tx() {
setTitle( "JMF/RTP Transmitter");
config= new Config();
GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
JPanel p= new JPanel();
p.setLayout( gridBagLayout);
JPanel localPanel= createLocalPanel();
gbc= new GridBagConstraints();
gbc.gridx= 0;
gbc.gridy= 0;
gbc.gridwidth= 2;
gbc.anchor= GridBagConstraints.CENTER;
gbc.fill= GridBagConstraints.BOTH;
gbc.insets= new Insets( 10, 5, 0, 0);
((GridBagLayout)p.getLayout()).setConstraints( localPanel, gbc);
p.add( localPanel);
JPanel targetPanel= createTargetPanel();
gbc= new GridBagConstraints();
gbc.gridx= 1;
gbc.gridy= 1;
gbc.weightx= 1.0;
gbc.weighty= 1.0;
gbc.anchor= GridBagConstraints.CENTER;
gbc.fill= GridBagConstraints.BOTH;
gbc.insets= new Insets( 10, 5, 0, 0);
((GridBagLayout)p.getLayout()).setConstraints( targetPanel, gbc);
p.add( targetPanel);
JPanel mediaPanel= createMediaPanel();
gbc= new GridBagConstraints();
gbc.gridx= 1;
gbc.gridy= 2;
gbc.weightx= 1.0;
gbc.weighty= 1.0;
gbc.anchor= GridBagConstraints.CENTER;
gbc.fill= GridBagConstraints.BOTH;
gbc.insets= new Insets( 10, 5, 0, 0);
((GridBagLayout)p.getLayout()).setConstraints( mediaPanel, gbc);
p.add( mediaPanel);
JPanel buttonPanel= new JPanel();
rtcp= new JButton( "RTCP Monitor");
update= new JButton( "Transmission Status");
update.setEnabled( false);
rtcp.addActionListener( this);
update.addActionListener( this);
buttonPanel.add( rtcp);
buttonPanel.add( update);
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 3;
gbc.gridwidth= 2;
gbc.weightx = 1.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.CENTER;
gbc.fill = GridBagConstraints.HORIZONTAL;
gbc.insets = new Insets( 5,5,10,5);
((GridBagLayout)p.getLayout()).setConstraints( buttonPanel, gbc);
p.add( buttonPanel);
getContentPane().add( p);
list.addMouseListener( this);
addWindowListener( this);
pack();
setVisible( true);
private JPanel createMediaPanel() {
JPanel p= new JPanel();
GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
p.setLayout( gridBagLayout);
JLabel label= new JLabel( "Media Locator:");
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 0;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.EAST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,10,5);
((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
p.add( label);
tf_media_file= new JTextField( 35);
gbc= new GridBagConstraints();
gbc.gridx = 1;
gbc.gridy = 0;
gbc.weightx = 1.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.WEST;
gbc.fill = GridBagConstraints.HORIZONTAL;
gbc.insets = new Insets( 5,5,10,5);
((GridBagLayout)p.getLayout()).setConstraints( tf_media_file, gbc);
p.add( tf_media_file);
tf_media_file.setText( config.media_locator);
cb_loop= new JCheckBox( "loop");
startXmit= new JButton( "Start Transmission");
startXmit.setEnabled( true);
startXmit.addActionListener( this);
gbc= new GridBagConstraints();
gbc.gridx = 2;
gbc.gridy = 0;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.WEST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,10,5);
((GridBagLayout)p.getLayout()).setConstraints( cb_loop, gbc);
p.add( cb_loop);
cb_loop.setSelected( true);
cb_loop.addActionListener( this);
gbc= new GridBagConstraints();
gbc.gridx = 1;
gbc.gridy = 1;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.CENTER;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,10,5);
((GridBagLayout)p.getLayout()).setConstraints( startXmit, gbc);
p.add( startXmit);
TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Source");
p.setBorder( titledBorder);
return p;
private JPanel createTargetPanel() {
JPanel p= new JPanel();
GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
p.setLayout( gridBagLayout);
targets= new Vector();
for( int i= 0; i < config.targets.size(); i++) {
targets.addElement( config.targets.elementAt( i));
listModel= new TargetListModel( targets);
list= new JList( listModel);
list.addKeyListener( this);
list.setPrototypeCellValue( "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx");
JScrollPane scrollPane= new JScrollPane( list,
ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED,
ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
gbc= new GridBagConstraints();
gbc.gridx= 0;
gbc.gridy= 0;
gbc.weightx= 1.0;
gbc.weighty= 1.0;
gbc.anchor= GridBagConstraints.CENTER;
gbc.fill= GridBagConstraints.BOTH;
gbc.insets= new Insets( 10, 5, 0, 0);
((GridBagLayout)p.getLayout()).setConstraints( scrollPane, gbc);
p.add( scrollPane);
JPanel p1= new JPanel();
p1.setLayout( gridBagLayout);
JLabel label= new JLabel( "IP Address:");
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 0;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.EAST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
p1.add( label);
tf_remote_address= new JTextField( 15);
gbc= new GridBagConstraints();
gbc.gridx = 1;
gbc.gridy = 0;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.WEST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_address, gbc);
p1.add( tf_remote_address);
label= new JLabel( "Data Port:");
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 1;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.EAST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
p1.add( label);
tf_remote_data_port= new JTextField( 15);
gbc= new GridBagConstraints();
gbc.gridx = 1;
gbc.gridy = 1;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.WEST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_data_port, gbc);
p1.add( tf_remote_data_port);
JPanel p2= new JPanel();
addTarget= new JButton( "Add Target");
removeTarget= new JButton( "Remove Target");
p2.add( addTarget);
p2.add( removeTarget);
addTarget.addActionListener( this);
removeTarget.addActionListener( this);
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 2;
gbc.weightx = 1.0;
gbc.weighty = 0.0;
gbc.gridwidth= 2;
gbc.anchor = GridBagConstraints.CENTER;
gbc.fill = GridBagConstraints.HORIZONTAL;
gbc.insets = new Insets( 20,5,0,5);
((GridBagLayout)p1.getLayout()).setConstraints( p2, gbc);
p1.add( p2);
gbc= new GridBagConstraints();
gbc.gridx= 1;
gbc.gridy= 0;
gbc.weightx= 1.0;
gbc.weighty= 1.0;
gbc.anchor= GridBagConstraints.CENTER;
gbc.fill= GridBagConstraints.BOTH;
gbc.insets= new Insets( 10, 5, 0, 0);
((GridBagLayout)p.getLayout()).setConstraints( p1, gbc);
p.add( p1);
TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Targets");
p.setBorder( titledBorder);
return p;
private JPanel createLocalPanel() {
JPanel p= new JPanel();
GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
p.setLayout( gridBagLayout);
JLabel label= new JLabel( "IP Address:");
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 0;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.EAST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
p.add( label);
JTextField tf_local_host= new JTextField( 15);
gbc= new GridBagConstraints();
gbc.gridx = 1;
gbc.gridy = 0;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.WEST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p.getLayout()).setConstraints( tf_local_host, gbc);
p.add( tf_local_host);
try {
String host= InetAddress.getLocalHost().getHostAddress();
tf_local_host.setText( host);
} catch( UnknownHostException e) {
label= new JLabel( "Data Port:");
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 1;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.EAST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
p.add( label);
tf_data_port= new JTextField( 15);
gbc= new GridBagConstraints();
gbc.gridx = 1;
gbc.gridy = 1;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.WEST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,10,5);
((GridBagLayout)p.getLayout()).setConstraints( tf_data_port, gbc);
p.add( tf_data_port);
tf_data_port.setText( config.local_data_port);
TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Local Host");
p.setBorder( titledBorder);
return p;
public void actionPerformed( ActionEvent event) {
Object source= event.getSource();
if( source == addTarget) {
String ip= tf_remote_address.getText().trim();
String port= tf_remote_data_port.getText().trim();
String localPort= tf_data_port.getText().trim();
addTargetToList( localPort, ip, port);
if( avTransmitter != null) {
avTransmitter.addTarget( ip, port);
} else if( source == removeTarget) {
int index= list.getSelectedIndex();
if( index != -1) {
Target target= (Target) targets.elementAt( index);
if( avTransmitter != null) {
avTransmitter.removeTarget( target.ip, target.port);
targets.removeElement( target);
listModel.setData( targets);
} else if( source == startXmit) {
if( startXmit.getLabel().equals( "Start Transmission")) {
int data_port= new Integer( tf_data_port.getText()).intValue();
avTransmitter= new AVTransmitter( this, data_port);
avTransmitter.start( tf_media_file.getText().trim(), targets);
avTransmitter.setLooping( cb_loop.isSelected());
startXmit.setLabel( "Stop Transmission");
} else if( startXmit.getLabel().equals( "Stop Transmission")) {
avTransmitter.stop();
avTransmitter= null;
removeNonBaseTargets();
listModel.setData( targets);
startXmit.setLabel( "Start Transmission");
} else if( source == rtcp) {
if( rtcpViewer == null) {
rtcpViewer= new RTCPViewer();
} else {
rtcpViewer.setVisible( true);
rtcpViewer.toFront();
} else if( source == cb_loop) {
if( avTransmitter != null) {
avTransmitter.setLooping( cb_loop.isSelected());
private void removeNonBaseTargets() {
String localPort= tf_data_port.getText().trim();
for( int i= targets.size(); i > 0;) {
Target target= (Target) targets.elementAt( i - 1);
if( !target.localPort.equals( localPort)) {
targets.removeElement( target);
i--;
public void addTargetToList( String localPort,
String ip, String port) {
ListUpdater listUpdater= new ListUpdater( localPort, ip,
port, listModel, targets);
SwingUtilities.invokeLater( listUpdater);
public void rtcpReport( String report) {
if( rtcpViewer != null) {
rtcpViewer.report( report);
public void windowClosing( WindowEvent event) {
config.local_data_port= tf_data_port.getText().trim();
config.targets= new Vector();
for( int i= 0; i < targets.size(); i++) {
Target target= (Target) targets.elementAt( i);
if( target.localPort.equals( config.local_data_port)) {
config.addTarget( target.ip, target.port);
config.media_locator= tf_media_file.getText().trim();
config.write();
System.exit( 0);
public void windowClosed( WindowEvent event) {
public void windowDeiconified( WindowEvent event) {
public void windowIconified( WindowEvent event) {
public void windowActivated( WindowEvent event) {
public void windowDeactivated( WindowEvent event) {
public void windowOpened( WindowEvent event) {
public void keyPressed( KeyEvent event) {
public void keyReleased( KeyEvent event) {
Object source= event.getSource();
if( source == list) {
int index= list.getSelectedIndex();
public void keyTyped( KeyEvent event) {
public void mousePressed( MouseEvent e) {
public void mouseReleased( MouseEvent e) {
public void mouseEntered( MouseEvent e) {
public void mouseExited( MouseEvent e) {
public void mouseClicked( MouseEvent e) {
Object source= e.getSource();
if( source == list) {
int index= list.getSelectedIndex();
if( index != -1) {
Target target= (Target) targets.elementAt( index);
tf_remote_address.setText( target.ip);
tf_remote_data_port.setText( target.port);
int index= list.locationToIndex( e.getPoint());
public static void main( String[] args) {
new Tx();
class TargetListModel extends AbstractListModel {
private Vector options;
public TargetListModel( Vector options) {
this.options= options;
public int getSize() {
int size;
if( options == null) {
size= 0;
} else {
size= options.size();
return size;
public Object getElementAt( int index) {
String name;
if( index < getSize()) {
Target o= (Target)options.elementAt( index);
name= o.localPort + " ---> " + o.ip + ":" + o.port;
} else {
name= null;
return name;
public void setData( Vector data) {
options= data;
fireContentsChanged( this, 0, data.size());
class ListUpdater implements Runnable {
String localPort, ip, port;
TargetListModel listModel;
Vector targets;
public ListUpdater( String localPort, String ip, String port,
TargetListModel listModel, Vector targets) {
this.localPort= localPort;
this.ip= ip;
this.port= port;
this.listModel= listModel;
this.targets= targets;
public void run() {
Target target= new Target( localPort, ip, port);
if( !targetExists( localPort, ip, port)) {
targets.addElement( target);
listModel.setData( targets);
public boolean targetExists( String localPort, String ip, String port) {
boolean exists= false;
for( int i= 0; i < targets.size(); i++) {
Target target= (Target) targets.elementAt( i);
if( target.localPort.equals( localPort)
&& target.ip.equals( ip)
&& target.port.equals( port)) {
exists= true;
break;
return exists;
import java.awt.*;
import java.io.*;
import java.net.InetAddress;
import java.util.*;
import javax.media.*;
import javax.media.protocol.*;
import javax.media.format.*;
import javax.media.control.TrackControl;
import javax.media.control.QualityControl;
import javax.media.rtp.*;
import javax.media.rtp.event.*;
import javax.media.rtp.rtcp.*;
public class AVTransmitter implements ReceiveStreamListener, RemoteListener,
ControllerListener {
// Input MediaLocator
// Can be a file or http or capture source
private MediaLocator locator;
private String ipAddress;
private int portBase;
private Processor processor = null;
private RTPManager rtpMgrs[];
private int localPorts[];
private DataSource dataOutput = null;
private int local_data_port;
private Tx tx;
public AVTransmitter( Tx tx, int data_port) {
this.tx= tx;
local_data_port= data_port;
* Starts the transmission. Returns null if transmission started ok.
* Otherwise it returns a string with the reason why the setup failed.
public synchronized String start( String filename, Vector targets) {
String result;
locator= new MediaLocator( filename);
// Create a processor for the specified media locator
// and program it to output JPEG/RTP
result = createProcessor();
if (result != null) {
return result;
// Create an RTP session to transmit the output of the
// processor to the specified IP address and port no.
result = createTransmitter( targets);
if (result != null) {
processor.close();
processor = null;
return result;
// Start the transmission
processor.start();
return null;
* Use the RTPManager API to create sessions for each media
* track of the processor.
private String createTransmitter( Vector targets) {
// Cheated. Should have checked the type.
PushBufferDataSource pbds = (PushBufferDataSource)dataOutput;
PushBufferStream pbss[] = pbds.getStreams();
rtpMgrs = new RTPManager[pbss.length];
localPorts = new int[ pbss.length];
SessionAddress localAddr, destAddr;
InetAddress ipAddr;
SendStream sendStream;
int port;
SourceDescription srcDesList[];
for (int i = 0; i < pbss.length; i++) {
// for (int i = 0; i < 1; i++) {
try {
rtpMgrs[i] = RTPManager.newInstance();
port = local_data_port + 2*i;
localPorts[ i]= port;
localAddr = new SessionAddress( InetAddress.getLocalHost(),
port);
rtpMgrs.initialize( localAddr);
rtpMgrs[i].addReceiveStreamListener(this);
rtpMgrs[i].addRemoteListener(this);
for( int k= 0; k < targets.size(); k++) {
Target target= (Target) targets.elementAt( k);
int targetPort= new Integer( target.port).intValue();
addTarget( localPorts[ i], rtpMgrs[ i], target.ip, targetPort + 2*i);
sendStream = rtpMgrs[i].createSendStream(dataOutput, i);
sendStream.start();
} catch (Exception e) {
e.printStackTrace();
return e.getMessage();
return null;
public void addTarget( String ip, String port) {
for (int i= 0; i < rtpMgrs.length; i++) {
int targetPort= new Integer( port).intValue();
addTarget( localPorts[ i], rtpMgrs[ i], ip, targetPort + 2*i);
public void addTarget( int localPort, RTPManager mgr, String ip, int port) {
try {
SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
new Integer( port).intValue());
mgr.addTarget( addr);
tx.addTargetToList( localPort + "", ip, port + "");
} catch( Exception e) {
e.printStackTrace();
public void removeTarget( String ip, String port) {
try {
SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
new Integer( port).intValue());
for (int i= 0; i < rtpMgrs.length; i++) {
rtpMgrs[ i].removeTarget( addr, "target removed from transmitter.");
} catch( Exception e) {
e.printStackTrace();
boolean looping= true;
public void controllerUpdate( ControllerEvent ce) {
System.out.println( ce);
if( ce instanceof DurationUpdateEvent) {
Time duration= ((DurationUpdateEvent) ce).getDuration();
System.out.println( "duration: " + duration.getSeconds());
} else if( ce instanceof EndOfMediaEvent) {
System.out.println( "END OF MEDIA - looping=" + looping);
if( looping) {
processor.setMediaTime( new Time( 0));
processor.start();
public void setLooping( boolean flag) {
looping= flag;
public void update( ReceiveStreamEvent event) {
String timestamp= getTimestamp();
StringBuffer sb= new StringBuffer();
if( event instanceof InactiveReceiveStreamEvent) {
sb.append( timestamp + " Inactive Receive Stream");
} else if( event instanceof ByeEvent) {
sb.append( timestamp + " Bye");
} else {
System.out.println( "ReceiveStreamEvent: "+ event);
tx.rtcpReport( sb.toString());
public void update( RemoteEvent event) {
String timestamp= getTimestamp();
if( event instanceof ReceiverReportEvent) {
ReceiverReport rr= ((ReceiverReportEvent) event).getReport();
StringBuffer sb= new StringBuffer();
sb.append( timestamp + " RR");
if( rr != null) {
Participant participant= rr.getParticipant();
if( participant != null) {
sb.append( " from " + participant.getCNAME());
sb.append( " ssrc=" + rr.getSSRC());
} else {
sb.append( " ssrc=" + rr.getSSRC());
tx.rtcpReport( sb.toString());
} else {
System.out.println( "RemoteEvent: " + event);
private String getTimestamp() {
String timestamp;
Calendar calendar= Calendar.getInstance();
int hour= calendar.get( Calendar.HOUR_OF_DAY);
String hourStr= formatTime( hour);
int minute= calendar.get( Calendar.MINUTE);
String minuteStr= formatTime( minute);
int second= calendar.get( Calendar.SECOND);
String secondStr= formatTime( second);
timestamp= hourStr + ":" + minuteStr + ":" + secondStr;
return timestamp;
private String formatTime( int time) {
String timeStr;
if( time < 10) {
timeStr= "0" + time;
} else {
timeStr= "" + time;
return timeStr;
* Stops the transmission if already started
public void stop() {
synchronized (this) {
if (processor != null) {
processor.stop();
processor.close();
processor = null;
for (int i= 0; i < rtpMgrs.length; i++) {
rtpMgrs[ i].removeTargets( "Session ended.");
rtpMgrs[ i].dispose();
public String createProcessor() {
if (locator == null) {
return "Locator is null";
DataSource ds;
DataSource clone;
try {
ds = javax.media.Manager.createDataSource(locator);
} catch (Exception e) {
return "Couldn't create DataSource";
// Try to create a processor to handle the input media locator
try {
processor = javax.media.Manager.createProcessor(ds);
processor.addControllerListener( this);
} catch (NoProcessorException npe) {
return "Couldn't create processor";
} catch (IOException ioe) {
return "IOException creating processor";
// Wait for it to configure
boolean result = waitForState(processor, Processor.Configured);
if (result == false)
return "Couldn't configure processor";
// Get the tracks from the processor
TrackControl [] tracks = processor.getTrackControls();
// Do we have atleast one track?
if (tracks == null || tracks.length < 1)
return "Couldn't find tracks in processor";
// Set the output content descriptor to RAW_RTP
// This will limit the supported formats reported from
// Track.getSupportedFormats to only valid RTP formats.
ContentDescriptor cd = new ContentDescriptor(ContentDescriptor.RAW_RTP);
processor.setContentDescriptor(cd);
Format supported[];
Format chosen;
boolean atLeastOneTrack = false;
// Program the tracks.
for (int i = 0; i < tracks.length; i++) {
Format format = tracks[i].getFormat();
if (tracks[i].isEnabled()) {
supported = tracks[i].getSupportedFormats();
// We've set the output content to the RAW_RTP.
// So all the supported formats should work with RTP.
// We'll just pick the first one.
if (supported.length > 0) {
if (supported[0] instanceof VideoFormat) {
// For video formats, we should double check the
// sizes since not all formats work in all sizes.
chosen = checkForVideoSizes(tracks[i].getFormat(),
supported[0]);
} else
chosen = supported[0];
tracks[i].setFormat(chosen);
System.err.println("Track " + i + " is set to transmit as:");
System.err.println(" " + chosen);
atLeastOneTrack = true;
} else
tracks[i].setEnabled(false);
} else
tracks[i].setEnabled(false);
if (!atLeastOneTrack)
return "Couldn't set any of the tracks to a valid RTP format";
// Realize the processor. This will internally create a flow
// graph and attempt to create an output datasource for JPEG/RTP
// audio frames.
result = waitForState(processor, Controller.Realized);
if (result == false)
return "Couldn't realize processor";
// Set the JPEG quality to .5.
setJPEGQuality(processor, 0.5f);
// Get the output data source of the processor
dataOutput = processor.getDataOutput();
return null;
static SessionAddress destAddr1, destAddr2;
* For JPEG and H263, we know that they only work for particular
* sizes. So we'll perform extra checking here to make sure they
* are of the right sizes.
Format checkForVideoSizes(Format original, Format supported) {
int width, height;
Dimension size = ((VideoFormat)original).getSize();
Format jpegFmt = new Format(VideoFormat.JPEG_RTP);
Format h263Fmt = new Format(VideoFormat.H263_RTP);
if (supported.matches(jpegFmt)) {
// For JPEG, make sure width and height are divisible by 8.
width = (size.width % 8 == 0 ? size.width :
(int)(size.width / 8) * 8);
height = (size.height % 8 == 0 ? size.height :
(int)(size.height / 8) * 8);
} else if (supported.matches(h263Fmt)) {
// For H.263, we only support some specific sizes.
if (size.width < 128) {
width = 128;
height = 96;
} else if (size.width < 176) {
width = 176;
height = 144;
} else {
width = 352;
height = 288;
} else {
// We don't know this particular format. We'll just
// leave it alone then.
return supported;
return (new VideoFormat(null,
new Dimension(width, height),
Format.NOT_SPECIFIED,
null,
Format.NOT_SPECIFIED)).intersects(supported);
* Setting the encoding quality to the specified value on the JPEG encoder.
* 0.5 is a good default.
void setJPEGQuality(Player p, float val) {
Control cs[] = p.getControls();
QualityControl qc = null;
VideoFormat jpegFmt = new VideoFormat(VideoFormat.JPEG);
// Loop through the controls to find the Quality control for
// the JPEG encoder.
for (int i = 0; i < cs.length; i++) {
if (cs[i] instanceof QualityControl &&
cs[i] instanceof Owned) {
Object owner = ((Owned)cs[i]).getOwner();
// Check to see if the owner is a Codec.
// Then check for the output format.
if (owner instanceof Codec) {
Format fmts[] = ((Codec)owner).getSupportedOutputFormats(null);
for (int j = 0; j < fmts.length; j++) {
if (fmts[j].matches(jpegFmt)) {
qc = (QualityControl)cs[i];
qc.setQuality(val);
System.err.println("- Setting quality to " +
val + " on " + qc);
break;
if (qc != null)
break;
* Convenience methods to handle processor's state changes.
private Integer stateLock = new Integer(0);
private boolean failed = false;
Integer getStateLock() {
return stateLock;
void setFailed() {
failed = true;
private synchronized boolean waitForState(Processor p, int state) {
p.addControllerListener(new StateListener());
failed = false;
// Call the required method on the processor
if (state == Processor.Configured) {
p.configure();
} else if (state == Processor.Realized) {
p.realize();
// Wait until we get an event that confirms the
// success of the method, or a failure event.
// See StateListener inner class
while (p.getState() < state && !failed) {
synchronized (getStateLock()) {
try {
getStateLock().wait();
} catch (InterruptedException ie) {
return false;
if (failed)
return false;
else
return true;
* Inner Classes
class StateListener implements ControllerListener {
public void controllerUpdate(ControllerEvent ce) {
// If there was an error during configure or
// realize, the processor will be closed
if (ce instanceof ControllerClosedEvent)
setFailed();
// All controller events, send a notification
// to the waiting thread in waitForState method.
if (ce instanceof ControllerEvent) {
synchronized (getStateLock()) {
getStateLock().notifyAll();
import java.io.*;
import java.util.*;
public class Config {
private String pathPrefix;
public String local_data_port;
public Vector targets;
public String media_locator;
public Config() {
pathPrefix= System.getProperty( "user.home") + File.separator;
read();
public void read() {
targets= new Vector();
try {
String path= pathPrefix + "xmit.dat";
FileInputStream fin= new FileInputStream( path);
BufferedInputStream bin= new BufferedInputStream( fin);
DataInputStream din= new DataInputStream( bin);
local_data_port= readString( din);
int n_targets= din.readInt();
for( int i= 0; i < n_targets; i++) {
String ip= readString( din);
String port= readString( din);
targets.addElement( new Target( local_data_port, ip, port));
media_locator= readString( din);
fin.close();
} catch( IOException e) {
System.out.println( "xmit.dat file missing!");
local_data_port= "";
media_locator= "";
public void write() {
try {
String path= pathPrefix + "xmit.dat";
FileOutputStream fout= new FileOutputStream( path);
BufferedOutputStream bout= new BufferedOutputStream( fout);
DataOutputStream dout= new DataOutputStream( bout);
writeString( dout, local_data_port);
dout.writeInt( targets.size());
for( int i= 0; i < targets.size(); i++) {
Target target= (Target) targets.elementAt( i);
writeString( dout, target.ip);
writeString( dout, target.port);
writeString( dout, media_locator);
dout.flush();
dout.close();
fout.close();
} catch( IOException e) {
System.out.println( "Error writing xmit.dat!");
public String readString( DataInputStream din) {
String s= null;
try {
short length= din.readShort();
if( length > 0) {
byte buf[]= new byte[ length];
din.read( buf, 0, length);
s= new String( buf);
} catch( IOException e) {
System.err.println( e);
return s;
public void writeString( DataOutputStream dout, String str) {
try {
if( str != null) {
dout.writeShort( str.length());
dout.writeBytes( str);
} else {
dout.writeShort( 0);
} catch( Exception e) {
e.printStackTrace();
public void addTarget( String ip, String port) {
targets.addElement( new Target( "", ip, port));
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import java.net.*;
import java.util.*;
import javax.media.rtp.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.border.*;
public class RTCPViewer extends JFrame implements ActionListener, KeyListener,
MouseListener, WindowListener {
private JList list;
private Vector reports;
private RtcpListModel listModel;
private JButton clear;
private JButton start;
private boolean recording;
public RTCPViewer() {
setTitle( "JMF/RTCP Tracer");
reI'm also getting some really bad sound quality on facebook notifications. I've been forced to disable them they sound horrible like they are clipping.
Trying to figure out if this is a problem on all Late 2013 15" macbook pros or if mine is defective? This occurs even at around 20-30% volume levels with the Facebook notification sound problems... -
BADI for storage location restriction in IW32
Dear All,
I am working on one scenario in this user has to get the error message :-
1. Whenever he doesn't enter the Storage Location in Component Tab (in IW32) and also he should not be able to save the Maintenance Order.
2. There is ZTABLE (ZTPM058) , if there is no entry of the Storage location in the ZTABLE then also he should get the error.
I have used the BADI BADI_DI_PCS2_1 to do this but the problem is when the user enter the component manually then it works fine , but when he selects the component from List button (it is in the bottom of the component tab screen) , then this BADI doesn't work correctly.
Basically when the user selects component from List then it should first put data into the component tab and then give the error . but this is not happening.
Please suggest what can be done.
Below is the code that I have written :-
l_ucomm = sy-ucomm.
if diad_resbd-MENGE is not INITIAL.
SELECT SINGLE ingpr "Plant Section
lgort "Storage Location
INTO (l_ingpr,
l_lgort)
FROM ztpm058
WHERE lgort = diad_resbd-lgort
AND ingpr = diad_caufvd-ingpr.
IF sy-subrc <> 0.
if l_ucomm <> 'IMKL'.
CONCATENATE 'FOR ITEM NO' diad_resbd-posnr
', COMPONENT' diad_resbd-matnr
'AND PLANNER GROUP' diad_caufvd-ingpr
'THERE IS NO STORAGE LOCATION' diad_resbd-lgort INTO txtmgs SEPARATED BY space.
clear l_ucomm.
clear sy-ucomm.
MESSAGE txtmgs TYPE 'E' .
elseif l_ucomm = 'IMKL'. (OK CODE when user press List button)
CONCATENATE 'FOR ITEM NO' diad_resbd-posnr
', COMPONENT' diad_resbd-matnr
'AND PLANNER GROUP' diad_caufvd-ingpr
'THERE IS NO STORAGE LOCATION' diad_resbd-lgort
INTO txtmgs SEPARATED BY space.
clear l_ucomm.
clear sy-ucomm.
MESSAGE txtmgs TYPE 'W' .
endif.
endif.
ELSE.
message 'Please enter the Quantity' type 'W'.
clear l_ucomm.
clear sy-ucomm.
endif.
Thanks and Regards,
Rachit KhannaDear Rajesh Kumar Raju
Go to IMG-->Logistics Execution >Shipping> Picking -->Determine Picking Location -->Define Rules for Picking Location Determination. There you have to assign the MALA rule to your delivery type
Also maintain in OMJ8 and in material master under MRP2 view the default storage location in the field "Prod. stor. location"
thanks
G. Lakshmipathi -
Process_order api - Validation Failed for Field Bill To
I am relatively new to the EBS world and I'm having some issues with calling the OE_Order_Pub.Process_order API. When I call this API I am getting a return error of "Validation failed for field - Bill To".
For a background...I have an APEX application where users can choose parts from a small part master list to add to an existing order. The existing order will not have a status of Closed or Cancelled and there will be atleast 1 line in the order before the new parts are added. The parts will be added as new lines to the order with some of the new line data defaulting to the same information as the first line. I am using EBS version 12.1.3 with a multi-org setup. It seems that the orders under one org (id=3) are working fine, but another org(id=569) they never work and keep getting the error. I am setting the context to the org of the order and initializing the apps user information with the responsibility "Order Management Super User".
Do you have any idea what could be wrong or how I can debug the error to get a little more detail?
Here is the procedure I have.
PROCEDURE TEK_ORD_PROCESS_ORDER(p_order_id IN NUMBER, p_return_code OUT NOCOPY VARCHAR2, p_status OUT NOCOPY VARCHAR2) IS
CURSOR c_order_parts IS
SELECT *
FROM TEK_APEX.TEK_ORD_ORDER_PARTS
WHERE ORDER_ID = p_order_id;
TYPE t_parts IS TABLE OF TEK_APEX.TEK_ORD_ORDER_PARTS%ROWTYPE;
v_order_parts t_parts;
--Setup variables
H_Op_Code VARCHAR2(25) DEFAULT OE_GLOBALS.G_OPR_UPDATE;
L_Op_Code VARCHAR2(25) DEFAULT OE_GLOBALS.G_OPR_CREATE;
v_install_type VARCHAR2(25) := 'PTO';
v_source_id NUMBER;
v_user_id NUMBER;
v_resp_id NUMBER;
v_app_id NUMBER;
v_debug VARCHAR2(32767);
v_oracle_order OE_ORDER_HEADERS_ALL%ROWTYPE;
v_apex_order TEK_APEX.TEK_ORD_SALES_ORDERS%ROWTYPE;
p_header_rec OE_Order_Pub.Header_Rec_Type;
p_header_val_rec OE_Order_Pub.Header_Val_Rec_Type;
p_Header_Adj_tab OE_Order_Pub.Header_Adj_Tbl_Type;
p_Header_Adj_val_tab OE_Order_Pub.Header_Adj_Val_Tbl_Type;
p_Header_price_Att_tab OE_Order_Pub.Header_Price_Att_Tbl_Type;
p_Header_Adj_Att_tab OE_Order_Pub.Header_Adj_Att_Tbl_Type;
p_Header_Adj_Assoc_tab OE_Order_Pub.Header_Adj_Assoc_Tbl_Type;
p_Header_Scredit_tab OE_Order_Pub.Header_Scredit_Tbl_Type;
p_Header_Scredit_val_tab OE_Order_Pub.Header_Scredit_Val_Tbl_Type;
p_line_tab OE_Order_Pub.Line_Tbl_Type;
p_line_val_tab OE_Order_Pub.Line_Val_Tbl_Type;
p_Line_Adj_tab OE_Order_Pub.Line_Adj_Tbl_Type;
p_Line_Adj_val_tab OE_Order_Pub.Line_Adj_Val_Tbl_Type;
p_Line_price_Att_tab OE_Order_Pub.Line_Price_Att_Tbl_Type;
p_Line_Adj_Att_tab OE_Order_Pub.Line_Adj_Att_Tbl_Type;
p_Line_Adj_Assoc_tab OE_Order_Pub.Line_Adj_Assoc_Tbl_Type;
p_Line_Scredit_tab OE_Order_Pub.Line_Scredit_Tbl_Type;
p_Line_Scredit_val_tab OE_Order_Pub.Line_Scredit_Val_Tbl_Type;
p_Lot_Serial_tab OE_Order_Pub.Lot_Serial_Tbl_Type;
p_Lot_Serial_val_tab OE_Order_Pub.Lot_Serial_Val_Tbl_Type;
p_action_request_tab OE_Order_pub.Request_Tbl_Type;
l_header_rec OE_Order_Pub.Header_Rec_Type;
l_header_val_rec OE_Order_Pub.Header_Val_Rec_Type;
l_Header_Adj_tab OE_Order_Pub.Header_Adj_Tbl_Type;
l_Header_Adj_val_tab OE_Order_Pub.Header_Adj_Val_Tbl_Type;
l_Header_price_Att_tab OE_Order_Pub.Header_Price_Att_Tbl_Type;
l_Header_Adj_Att_tab OE_Order_Pub.Header_Adj_Att_Tbl_Type;
l_Header_Adj_Assoc_tab OE_Order_Pub.Header_Adj_Assoc_Tbl_Type;
l_Header_Scredit_tab OE_Order_Pub.Header_Scredit_Tbl_Type;
l_Header_Scredit_val_tab OE_Order_Pub.Header_Scredit_Val_Tbl_Type;
l_line_tab OE_Order_Pub.Line_Tbl_Type;
l_line_val_tab OE_Order_Pub.Line_Val_Tbl_Type;
l_Line_Adj_tab OE_Order_Pub.Line_Adj_Tbl_Type;
l_Line_Adj_val_tab OE_Order_Pub.Line_Adj_Val_Tbl_Type;
l_Line_price_Att_tab OE_Order_Pub.Line_Price_Att_Tbl_Type;
l_Line_Adj_Att_tab OE_Order_Pub.Line_Adj_Att_Tbl_Type;
l_Line_Adj_Assoc_tab OE_Order_Pub.Line_Adj_Assoc_Tbl_Type;
l_Line_Scredit_tab OE_Order_Pub.Line_Scredit_Tbl_Type;
l_Line_Scredit_val_tab OE_Order_Pub.Line_Scredit_Val_Tbl_Type;
l_Lot_Serial_tab OE_Order_Pub.Lot_Serial_Tbl_Type;
l_Lot_Serial_val_tab OE_Order_Pub.Lot_Serial_Val_Tbl_Type;
l_ret_status VARCHAR2(200);
l_msg_count NUMBER;
l_msg_data VARCHAR2(200);
--Email information
v_email_address varchar2(100);
v_msg_text varchar(1000);
v_subject_text varchar(1000);
--Default line information
v_item_id NUMBER;
v_contact_id NUMBER;
v_invoice_to_org_id oe_order_lines_all.INVOICE_TO_ORG_ID%TYPE;
v_ship_to_org_id oe_order_lines_all.SHIP_TO_ORG_ID%TYPE;
v_sold_to_org_id oe_order_lines_all.SOLD_TO_ORG_ID%TYPE;
v_flow_status_code oe_order_lines_all.FLOW_STATUS_CODE%TYPE;
FUNCTION GET_ORACLE_ORDER(p_order_number IN OE_ORDER_HEADERS_ALL.ORDER_NUMBER%TYPE)
RETURN OE_ORDER_HEADERS_ALL%ROWTYPE IS
v_order OE_ORDER_HEADERS_ALL%ROWTYPE;
BEGIN
SELECT *
INTO v_order
FROM APPS.OE_ORDER_HEADERS_ALL
WHERE ORDER_NUMBER = p_order_number;
RETURN v_order;
EXCEPTION
WHEN OTHERS THEN
RETURN NULL;
END GET_ORACLE_ORDER;
FUNCTION GET_APEX_ORDER(p_order_id IN TEK_APEX.TEK_ORD_SALES_ORDERS.ORDER_ID%TYPE)
RETURN TEK_APEX.TEK_ORD_SALES_ORDERS%ROWTYPE IS
v_order TEK_APEX.TEK_ORD_SALES_ORDERS%ROWTYPE;
BEGIN
SELECT *
INTO v_order
FROM TEK_APEX.TEK_ORD_SALES_ORDERS
WHERE ORDER_ID = p_order_id;
RETURN v_order;
EXCEPTION
WHEN OTHERS THEN
RETURN NULL;
END GET_APEX_ORDER;
FUNCTION GET_SOURCE_ID(p_source_name IN VARCHAR2)
RETURN OE_ORDER_SOURCES.ORDER_SOURCE_ID%TYPE IS
v_source_id OE_ORDER_SOURCES.ORDER_SOURCE_ID%TYPE;
BEGIN
SELECT ORDER_SOURCE_ID
INTO v_source_id
FROM APPS.OE_ORDER_SOURCES
WHERE NAME = p_source_name;
RETURN v_source_id;
EXCEPTION
WHEN OTHERS THEN
RETURN NULL;
END GET_SOURCE_ID;
FUNCTION GET_ITEM_ID(p_part_number IN VARCHAR2, p_org_id IN NUMBER)
RETURN MTL_SYSTEM_ITEMS.INVENTORY_ITEM_ID%TYPE IS
v_item_id MTL_SYSTEM_ITEMS.INVENTORY_ITEM_ID%TYPE;
BEGIN
SELECT INVENTORY_ITEM_ID
INTO v_item_id
FROM APPS.MTL_SYSTEM_ITEMS
WHERE SEGMENT1 = p_part_number
AND ORGANIZATION_ID = p_org_id;
RETURN v_item_id;
EXCEPTION
WHEN OTHERS THEN
RETURN NULL;
END GET_ITEM_ID;
BEGIN
apps.mo_global.set_policy_context('S',3);
apps.mo_global.init('XXTEK');
BEGIN
SELECT USER_ID
INTO v_user_id
FROM APPS.FND_USER
WHERE USER_NAME = 'SYSADMIN';
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20001, 'Error selecting user');
END;
BEGIN
SELECT RESPONSIBILITY_ID, APPLICATION_ID
INTO v_resp_id, v_app_id
FROM TEK_APEX.TEK_RR_ACTIVE_RESP_VW
WHERE UPPER(RESPONSIBILITY_NAME) = 'ORDER MANAGEMENT SUPER USER';
--Set current user information
fnd_global.apps_initialize (user_id => v_user_id
,resp_id => v_resp_id
,resp_appl_id => v_app_id);
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20001, 'Error selecting responsibility');
END;
--Get the order information from Oracle and APEX
v_apex_order := GET_APEX_ORDER(p_order_id);
IF v_apex_order.ORDER_ID IS NULL THEN
RAISE_APPLICATION_ERROR(-20001, 'APEX Order ID is invalid: ' || p_order_id);
END IF;
v_oracle_order := GET_ORACLE_ORDER(TO_NUMBER(v_apex_order.ORDER_NUMBER));
IF v_oracle_order.ORDER_NUMBER IS NULL THEN
RAISE_APPLICATION_ERROR(-20001, 'Order Number not found in Oracle: ' || v_apex_order.ORDER_NUMBER);
END IF;
apps.mo_global.set_policy_context('S', v_oracle_order.ORG_ID);
v_source_id := GET_SOURCE_ID('IMPORT');
IF v_source_id IS NULL THEN
RAISE_APPLICATION_ERROR(-20001, 'Source ID not found for IMPORT');
END IF;
/* ********** Gather Order Header********** */
/* ********** Info. ********** */
OE_Order_Pub.Get_Order(p_api_version_number => 1.0,
p_init_msg_list => FND_API.G_TRUE,
p_return_values => FND_API.G_TRUE,
x_return_status => l_ret_status,
x_msg_count => l_msg_count,
x_msg_data => l_msg_data,
p_header_id => v_oracle_order.HEADER_ID,
p_header => NULL,
x_header_rec => l_header_rec,
x_header_val_rec => l_header_val_rec,
x_Header_Adj_tbl => l_Header_Adj_tab,
x_Header_Adj_val_tbl => l_Header_Adj_val_tab,
x_Header_price_Att_tbl => l_Header_price_Att_tab,
x_Header_Adj_Att_tbl => l_Header_Adj_Att_tab,
x_Header_Adj_Assoc_tbl => l_Header_Adj_Assoc_tab,
x_Header_Scredit_tbl => l_Header_Scredit_tab,
x_Header_Scredit_val_tbl=> l_Header_Scredit_val_tab,
x_line_tbl => l_line_tab,
x_line_val_tbl => l_line_val_tab,
x_Line_Adj_tbl => l_Line_Adj_tab,
x_Line_Adj_val_tbl => l_Line_Adj_val_tab,
x_Line_price_Att_tbl => l_Line_price_Att_tab,
x_Line_Adj_Att_tbl => l_Line_Adj_Att_tab,
x_Line_Adj_Assoc_tbl => l_Line_Adj_Assoc_tab,
x_Line_Scredit_tbl => l_Line_Scredit_tab,
x_Line_Scredit_val_tbl => l_Line_Scredit_val_tab,
x_Lot_Serial_tbl => l_Lot_Serial_tab,
x_Lot_Serial_val_tbl => l_Lot_Serial_val_tab);
--Save defaults from first line
IF l_line_tab.EXISTS(1) THEN
v_contact_id := l_line_tab(1).SHIP_TO_CONTACT_ID;
v_invoice_to_org_id := l_line_tab(1).INVOICE_TO_ORG_ID;
v_ship_to_org_id := l_line_tab(1).SHIP_TO_ORG_ID;
v_sold_to_org_id := l_line_tab(1).SOLD_TO_ORG_ID;
v_flow_status_code := l_line_tab(1).FLOW_STATUS_CODE;
END IF;
--Clear out the line array before adding any new parts
FOR i IN l_line_tab.FIRST..l_line_tab.LAST LOOP
l_line_tab.DELETE(i);
l_line_val_tab.DELETE(i);
l_line_adj_tab.DELETE(i);
l_line_adj_val_tab.DELETE(i);
l_line_price_att_tab.DELETE(i);
l_line_adj_att_tab.DELETE(i);
l_line_adj_assoc_tab.DELETE(i);
l_line_scredit_tab.DELETE(i);
l_line_scredit_val_tab.DELETE(i);
l_lot_serial_tab.DELETE(i);
l_lot_serial_val_tab.DELETE(i);
END LOOP;
/* ********** Gather Order Lines ********** */
OPEN c_order_parts;
FETCH c_order_parts BULK COLLECT INTO v_order_parts;
CLOSE c_order_parts;
FOR i IN v_order_parts.FIRST..v_order_parts.LAST LOOP
v_item_id := GET_ITEM_ID(v_order_parts(i).PART_NUMBER, v_oracle_order.SHIP_FROM_ORG_ID);
IF v_item_id IS NULL THEN
RAISE_APPLICATION_ERROR(-20001, 'Error selecting part number ' || v_order_parts(i).PART_NUMBER);
END IF;
--Clear line first
l_line_tab(i) := OE_Order_Pub.G_Miss_Line_Rec;
l_line_val_tab(i) := OE_ORDER_PUB.G_MISS_LINE_VAL_REC;
l_line_adj_tab(i) := OE_ORDER_PUB.G_MISS_LINE_ADJ_REC;
l_line_adj_val_tab(i) := OE_ORDER_PUB.G_MISS_LINE_ADJ_VAL_REC;
l_line_price_att_tab(i) := OE_ORDER_PUB.G_MISS_LINE_PRICE_ATT_REC ;
l_line_adj_att_tab(i) := OE_ORDER_PUB.G_MISS_LINE_ADJ_ATT_REC;
l_line_adj_assoc_tab(i) := OE_ORDER_PUB.G_MISS_LINE_ADJ_ASSOC_REC;
l_line_scredit_tab(i) := OE_ORDER_PUB.G_MISS_LINE_SCREDIT_REC;
l_line_scredit_val_tab(i) := OE_ORDER_PUB.G_MISS_LINE_SCREDIT_VAL_REC;
l_lot_serial_tab(i) := OE_ORDER_PUB.G_MISS_LOT_SERIAL_REC;
l_lot_serial_val_tab(i) := OE_ORDER_PUB.G_MISS_LOT_SERIAL_VAL_REC;
--Set line information
l_line_tab(i).PRICE_LIST_ID := v_oracle_order.PRICE_LIST_ID;
l_line_tab(i).header_id := v_oracle_order.header_id;
l_line_tab(i).inventory_item_id := v_item_id;
l_line_tab(i).ordered_quantity := v_order_parts(i).QUANTITY;
l_line_tab(i).operation := l_op_code;
l_line_tab(i).unit_list_price := 0;
l_line_tab(i).ship_from_org_id := v_oracle_order.ship_from_org_id;
l_line_tab(i).program_id := fnd_global.conc_program_id ;
l_line_tab(i).program_application_id := fnd_global.PROG_APPL_ID;
l_line_tab(i).order_source_id := v_source_id;
l_line_tab(i).calculate_price_flag := 'N' ;
l_line_tab(i).unit_selling_price := 0.00 ;
l_line_tab(i).request_date := v_apex_order.onsite_date;
l_line_tab(i).Schedule_ship_date := v_apex_order.onsite_date;
l_line_tab(i).promise_date := null;
l_line_tab(i).invoice_to_org_id := v_invoice_to_org_id;
l_line_tab(i).ship_to_org_id := v_ship_to_org_id;
l_line_tab(i).sold_to_org_id := v_sold_to_org_id;
l_line_tab(i).ship_to_contact_id := v_contact_id;
END LOOP;
--OE_DEBUG_PUB.DEBUG_ON;
--OE_DEBUG_PUB.Initialize;
--OE_DEBUG_PUB.SetDebugLevel(5);
--Add lines to order
OE_Order_Pub.Process_order(p_api_version_number => 1.0,
p_init_msg_list => FND_API.G_TRUE,
p_return_values => FND_API.G_TRUE,
p_action_commit => FND_API.G_FALSE,
x_return_status => l_ret_status,
x_msg_count => l_msg_count,
x_msg_data => l_msg_data,
p_header_rec => l_header_rec,
p_old_header_rec => l_header_rec,
p_header_val_rec => l_header_val_rec,
p_old_header_val_rec => l_header_val_rec,
p_Header_Adj_tbl => l_Header_Adj_tab,
p_old_Header_Adj_tbl => l_Header_Adj_tab,
p_Header_Adj_val_tbl => l_Header_Adj_val_tab,
p_old_Header_Adj_val_tbl => l_Header_Adj_val_tab,
p_Header_price_Att_tbl => l_Header_price_Att_tab,
p_old_Header_Price_Att_tbl => l_Header_price_Att_tab,
p_Header_Adj_Att_tbl => l_Header_Adj_Att_tab,
p_old_Header_Adj_Att_tbl => l_Header_Adj_Att_tab,
p_Header_Adj_Assoc_tbl => l_Header_Adj_Assoc_tab,
p_old_Header_Adj_Assoc_tbl => l_Header_Adj_Assoc_tab,
p_Header_Scredit_tbl => l_Header_Scredit_tab,
p_old_Header_Scredit_tbl => l_Header_Scredit_tab,
p_Header_Scredit_val_tbl => l_Header_Scredit_val_tab,
p_old_Header_Scredit_val_tbl => l_Header_Scredit_val_tab,
p_line_tbl => l_line_tab,
p_line_val_tbl => l_line_val_tab,
p_Line_Adj_tbl => l_line_adj_tab,
p_Line_Adj_val_tbl => l_line_adj_val_tab,
p_Line_price_Att_tbl => l_line_price_att_tab,
p_Line_Adj_Att_tbl => l_line_adj_att_tab,
p_Line_Adj_Assoc_tbl => l_line_adj_assoc_tab,
p_Line_Scredit_tbl => l_line_scredit_tab,
p_Line_Scredit_val_tbl => l_line_scredit_val_tab,
p_Lot_Serial_tbl => l_lot_serial_tab,
p_Lot_Serial_val_tbl => l_lot_serial_val_tab,
p_action_request_tbl => OE_ORDER_PUB.G_MISS_REQUEST_TBL,
x_header_rec => p_header_rec,
x_header_val_rec => p_header_val_rec,
x_Header_Adj_tbl => p_Header_Adj_tab,
x_Header_Adj_val_tbl => p_Header_Adj_val_tab,
x_Header_price_Att_tbl => p_Header_price_Att_tab,
x_Header_Adj_Att_tbl => p_Header_Adj_Att_tab,
x_Header_Adj_Assoc_tbl => p_Header_Adj_Assoc_tab,
x_Header_Scredit_tbl => p_Header_Scredit_tab,
x_Header_Scredit_val_tbl => p_Header_Scredit_val_tab,
x_line_tbl => p_line_tab,
x_line_val_tbl => p_line_val_tab,
x_line_adj_tbl => p_line_adj_tab,
x_line_adj_val_tbl => p_line_adj_val_tab,
x_line_price_att_tbl => p_line_price_att_tab,
x_line_adj_att_tbl => p_line_adj_att_tab,
x_line_adj_assoc_tbl => p_line_adj_assoc_tab,
x_line_scredit_tbl => p_line_scredit_tab,
x_line_scredit_val_tbl => p_line_scredit_val_tab,
x_lot_serial_tbl => p_lot_serial_tab,
x_lot_serial_val_tbl => p_lot_serial_val_tab,
x_action_request_tbl => p_action_request_tab);
-- OE_DEBUG_PUB.DEBUG_OFF;
p_return_code := l_ret_status;
IF l_ret_status != 'S' THEN
DBMS_OUTPUT.PUT_LINE(l_msg_data);
IF l_msg_count = 1 THEN
p_status := OE_Msg_Pub.Get(1,'F');
ELSE
FOR i IN 1..l_msg_count LOOP
p_status := OE_Msg_Pub.Get(i,'F') || '<br />';
END LOOP;
END IF;
p_status := 'Error loading lines<br>' || p_status;
ELSE
p_status := 'Order Processed Successfully<br>' || v_order_parts.COUNT || ' Line(s) Loaded';
END IF;
-- WHILE OE_DEBUG_PUB.G_DEBUG_INDEX < OE_DEBUG_PUB.CountDebug LOOP
-- OE_DEBUG_PUB.GetNext(v_debug);
-- DBMS_OUTPUT.PUT_LINE(v_debug);
-- END LOOP;
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
RAISE;
END TEK_ORD_PROCESS_ORDER;Thanks!
Jonathan HartHello,
Try the following
1) Check if any processing constraints are applied to customer/location
2) Try to create a new customer and associate internal location.
Create a new order to reproduce the issue
Thanks
-Arif -
DO i need some extra hardware interface for receving both Audio and video
hi i m doing e-learning project. i have to capture video from webcam and voice from headphone and send to client.
but my code is working fine for either one at a time.
DO i need some extra hardware interface for receving both Audio and video. im using code AVTransmit and AVReceive found from this site only
After running TX
i give Dsound:// & vfw://0 in Media Locater only sound is received and no vedio
and when i give vfw://0 in Media Locater only live video is transmited.
im using JMF1.1.2e.
if any one know the method to run or cause of it plz reply me soon. i will be very thankfull
transmiter/server side code .first run TX on server
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import java.net.*;
import java.util.*;
import javax.media.rtp.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.border.*;
public class Tx extends JFrame implements ActionListener, KeyListener,
MouseListener, WindowListener {
Vector targets;
JList list;
JButton startXmit;
JButton rtcp;
JButton update;
JButton expiration;
JButton statistics;
JButton addTarget;
JButton removeTarget;
JTextField tf_remote_address;
JTextField tf_remote_data_port;
JTextField tf_media_file;
JTextField tf_data_port;
TargetListModel listModel;
AVTransmitter avTransmitter;
RTCPViewer rtcpViewer;
JCheckBox cb_loop;
Config config;
public Tx() {
setTitle( "JMF/RTP Transmitter");
config= new Config();
GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
JPanel p= new JPanel();
p.setLayout( gridBagLayout);
JPanel localPanel= createLocalPanel();
gbc= new GridBagConstraints();
gbc.gridx= 0;
gbc.gridy= 0;
gbc.gridwidth= 2;
gbc.anchor= GridBagConstraints.CENTER;
gbc.fill= GridBagConstraints.BOTH;
gbc.insets= new Insets( 10, 5, 0, 0);
((GridBagLayout)p.getLayout()).setConstraints( localPanel, gbc);
p.add( localPanel);
JPanel targetPanel= createTargetPanel();
gbc= new GridBagConstraints();
gbc.gridx= 1;
gbc.gridy= 1;
gbc.weightx= 1.0;
gbc.weighty= 1.0;
gbc.anchor= GridBagConstraints.CENTER;
gbc.fill= GridBagConstraints.BOTH;
gbc.insets= new Insets( 10, 5, 0, 0);
((GridBagLayout)p.getLayout()).setConstraints( targetPanel, gbc);
p.add( targetPanel);
JPanel mediaPanel= createMediaPanel();
gbc= new GridBagConstraints();
gbc.gridx= 1;
gbc.gridy= 2;
gbc.weightx= 1.0;
gbc.weighty= 1.0;
gbc.anchor= GridBagConstraints.CENTER;
gbc.fill= GridBagConstraints.BOTH;
gbc.insets= new Insets( 10, 5, 0, 0);
((GridBagLayout)p.getLayout()).setConstraints( mediaPanel, gbc);
p.add( mediaPanel);
JPanel buttonPanel= new JPanel();
rtcp= new JButton( "RTCP Monitor");
update= new JButton( "Transmission Status");
update.setEnabled( false);
rtcp.addActionListener( this);
update.addActionListener( this);
buttonPanel.add( rtcp);
buttonPanel.add( update);
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 3;
gbc.gridwidth= 2;
gbc.weightx = 1.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.CENTER;
gbc.fill = GridBagConstraints.HORIZONTAL;
gbc.insets = new Insets( 5,5,10,5);
((GridBagLayout)p.getLayout()).setConstraints( buttonPanel, gbc);
p.add( buttonPanel);
getContentPane().add( p);
list.addMouseListener( this);
addWindowListener( this);
pack();
setVisible( true);
private JPanel createMediaPanel() {
JPanel p= new JPanel();
GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
p.setLayout( gridBagLayout);
JLabel label= new JLabel( "Media Locator:");
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 0;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.EAST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,10,5);
((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
p.add( label);
tf_media_file= new JTextField( 35);
gbc= new GridBagConstraints();
gbc.gridx = 1;
gbc.gridy = 0;
gbc.weightx = 1.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.WEST;
gbc.fill = GridBagConstraints.HORIZONTAL;
gbc.insets = new Insets( 5,5,10,5);
((GridBagLayout)p.getLayout()).setConstraints( tf_media_file, gbc);
p.add( tf_media_file);
tf_media_file.setText( config.media_locator);
cb_loop= new JCheckBox( "loop");
startXmit= new JButton( "Start Transmission");
startXmit.setEnabled( true);
startXmit.addActionListener( this);
gbc= new GridBagConstraints();
gbc.gridx = 2;
gbc.gridy = 0;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.WEST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,10,5);
((GridBagLayout)p.getLayout()).setConstraints( cb_loop, gbc);
p.add( cb_loop);
cb_loop.setSelected( true);
cb_loop.addActionListener( this);
gbc= new GridBagConstraints();
gbc.gridx = 1;
gbc.gridy = 1;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.CENTER;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,10,5);
((GridBagLayout)p.getLayout()).setConstraints( startXmit, gbc);
p.add( startXmit);
TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Source");
p.setBorder( titledBorder);
return p;
private JPanel createTargetPanel() {
JPanel p= new JPanel();
GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
p.setLayout( gridBagLayout);
targets= new Vector();
for( int i= 0; i < config.targets.size(); i++) {
targets.addElement( config.targets.elementAt( i));
listModel= new TargetListModel( targets);
list= new JList( listModel);
list.addKeyListener( this);
list.setPrototypeCellValue( "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx");
JScrollPane scrollPane= new JScrollPane( list,
ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED,
ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
gbc= new GridBagConstraints();
gbc.gridx= 0;
gbc.gridy= 0;
gbc.weightx= 1.0;
gbc.weighty= 1.0;
gbc.anchor= GridBagConstraints.CENTER;
gbc.fill= GridBagConstraints.BOTH;
gbc.insets= new Insets( 10, 5, 0, 0);
((GridBagLayout)p.getLayout()).setConstraints( scrollPane, gbc);
p.add( scrollPane);
JPanel p1= new JPanel();
p1.setLayout( gridBagLayout);
JLabel label= new JLabel( "IP Address:");
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 0;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.EAST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
p1.add( label);
tf_remote_address= new JTextField( 15);
gbc= new GridBagConstraints();
gbc.gridx = 1;
gbc.gridy = 0;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.WEST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_address, gbc);
p1.add( tf_remote_address);
label= new JLabel( "Data Port:");
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 1;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.EAST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
p1.add( label);
tf_remote_data_port= new JTextField( 15);
gbc= new GridBagConstraints();
gbc.gridx = 1;
gbc.gridy = 1;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.WEST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_data_port, gbc);
p1.add( tf_remote_data_port);
JPanel p2= new JPanel();
addTarget= new JButton( "Add Target");
removeTarget= new JButton( "Remove Target");
p2.add( addTarget);
p2.add( removeTarget);
addTarget.addActionListener( this);
removeTarget.addActionListener( this);
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 2;
gbc.weightx = 1.0;
gbc.weighty = 0.0;
gbc.gridwidth= 2;
gbc.anchor = GridBagConstraints.CENTER;
gbc.fill = GridBagConstraints.HORIZONTAL;
gbc.insets = new Insets( 20,5,0,5);
((GridBagLayout)p1.getLayout()).setConstraints( p2, gbc);
p1.add( p2);
gbc= new GridBagConstraints();
gbc.gridx= 1;
gbc.gridy= 0;
gbc.weightx= 1.0;
gbc.weighty= 1.0;
gbc.anchor= GridBagConstraints.CENTER;
gbc.fill= GridBagConstraints.BOTH;
gbc.insets= new Insets( 10, 5, 0, 0);
((GridBagLayout)p.getLayout()).setConstraints( p1, gbc);
p.add( p1);
TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Targets");
p.setBorder( titledBorder);
return p;
private JPanel createLocalPanel() {
JPanel p= new JPanel();
GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
p.setLayout( gridBagLayout);
JLabel label= new JLabel( "IP Address:");
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 0;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.EAST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
p.add( label);
JTextField tf_local_host= new JTextField( 15);
gbc= new GridBagConstraints();
gbc.gridx = 1;
gbc.gridy = 0;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.WEST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p.getLayout()).setConstraints( tf_local_host, gbc);
p.add( tf_local_host);
try {
String host= InetAddress.getLocalHost().getHostAddress();
tf_local_host.setText( host);
} catch( UnknownHostException e) {
label= new JLabel( "Data Port:");
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 1;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.EAST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
p.add( label);
tf_data_port= new JTextField( 15);
gbc= new GridBagConstraints();
gbc.gridx = 1;
gbc.gridy = 1;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.WEST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,10,5);
((GridBagLayout)p.getLayout()).setConstraints( tf_data_port, gbc);
p.add( tf_data_port);
tf_data_port.setText( config.local_data_port);
TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Local Host");
p.setBorder( titledBorder);
return p;
public void actionPerformed( ActionEvent event) {
Object source= event.getSource();
if( source == addTarget) {
String ip= tf_remote_address.getText().trim();
String port= tf_remote_data_port.getText().trim();
String localPort= tf_data_port.getText().trim();
addTargetToList( localPort, ip, port);
if( avTransmitter != null) {
avTransmitter.addTarget( ip, port);
} else if( source == removeTarget) {
int index= list.getSelectedIndex();
if( index != -1) {
Target target= (Target) targets.elementAt( index);
if( avTransmitter != null) {
avTransmitter.removeTarget( target.ip, target.port);
targets.removeElement( target);
listModel.setData( targets);
} else if( source == startXmit) {
if( startXmit.getLabel().equals( "Start Transmission")) {
int data_port= new Integer( tf_data_port.getText()).intValue();
avTransmitter= new AVTransmitter( this, data_port);
avTransmitter.start( tf_media_file.getText().trim(), targets);
avTransmitter.setLooping( cb_loop.isSelected());
startXmit.setLabel( "Stop Transmission");
} else if( startXmit.getLabel().equals( "Stop Transmission")) {
avTransmitter.stop();
avTransmitter= null;
removeNonBaseTargets();
listModel.setData( targets);
startXmit.setLabel( "Start Transmission");
} else if( source == rtcp) {
if( rtcpViewer == null) {
rtcpViewer= new RTCPViewer();
} else {
rtcpViewer.setVisible( true);
rtcpViewer.toFront();
} else if( source == cb_loop) {
if( avTransmitter != null) {
avTransmitter.setLooping( cb_loop.isSelected());
private void removeNonBaseTargets() {
String localPort= tf_data_port.getText().trim();
for( int i= targets.size(); i > 0;) {
Target target= (Target) targets.elementAt( i - 1);
if( !target.localPort.equals( localPort)) {
targets.removeElement( target);
i--;
public void addTargetToList( String localPort,
String ip, String port) {
ListUpdater listUpdater= new ListUpdater( localPort, ip,
port, listModel, targets);
SwingUtilities.invokeLater( listUpdater);
public void rtcpReport( String report) {
if( rtcpViewer != null) {
rtcpViewer.report( report);
public void windowClosing( WindowEvent event) {
config.local_data_port= tf_data_port.getText().trim();
config.targets= new Vector();
for( int i= 0; i < targets.size(); i++) {
Target target= (Target) targets.elementAt( i);
if( target.localPort.equals( config.local_data_port)) {
config.addTarget( target.ip, target.port);
config.media_locator= tf_media_file.getText().trim();
config.write();
System.exit( 0);
public void windowClosed( WindowEvent event) {
public void windowDeiconified( WindowEvent event) {
public void windowIconified( WindowEvent event) {
public void windowActivated( WindowEvent event) {
public void windowDeactivated( WindowEvent event) {
public void windowOpened( WindowEvent event) {
public void keyPressed( KeyEvent event) {
public void keyReleased( KeyEvent event) {
Object source= event.getSource();
if( source == list) {
int index= list.getSelectedIndex();
public void keyTyped( KeyEvent event) {
public void mousePressed( MouseEvent e) {
public void mouseReleased( MouseEvent e) {
public void mouseEntered( MouseEvent e) {
public void mouseExited( MouseEvent e) {
public void mouseClicked( MouseEvent e) {
Object source= e.getSource();
if( source == list) {
int index= list.getSelectedIndex();
if( index != -1) {
Target target= (Target) targets.elementAt( index);
tf_remote_address.setText( target.ip);
tf_remote_data_port.setText( target.port);
int index= list.locationToIndex( e.getPoint());
public static void main( String[] args) {
new Tx();
class TargetListModel extends AbstractListModel {
private Vector options;
public TargetListModel( Vector options) {
this.options= options;
public int getSize() {
int size;
if( options == null) {
size= 0;
} else {
size= options.size();
return size;
public Object getElementAt( int index) {
String name;
if( index < getSize()) {
Target o= (Target)options.elementAt( index);
name= o.localPort + " ---> " + o.ip + ":" + o.port;
} else {
name= null;
return name;
public void setData( Vector data) {
options= data;
fireContentsChanged( this, 0, data.size());
class ListUpdater implements Runnable {
String localPort, ip, port;
TargetListModel listModel;
Vector targets;
public ListUpdater( String localPort, String ip, String port,
TargetListModel listModel, Vector targets) {
this.localPort= localPort;
this.ip= ip;
this.port= port;
this.listModel= listModel;
this.targets= targets;
public void run() {
Target target= new Target( localPort, ip, port);
if( !targetExists( localPort, ip, port)) {
targets.addElement( target);
listModel.setData( targets);
public boolean targetExists( String localPort, String ip, String port) {
boolean exists= false;
for( int i= 0; i < targets.size(); i++) {
Target target= (Target) targets.elementAt( i);
if( target.localPort.equals( localPort)
&& target.ip.equals( ip)
&& target.port.equals( port)) {
exists= true;
break;
return exists;
>>>>>>>>>>>>>>>>>
import java.awt.*;
import java.io.*;
import java.net.InetAddress;
import java.util.*;
import javax.media.*;
import javax.media.protocol.*;
import javax.media.format.*;
import javax.media.control.TrackControl;
import javax.media.control.QualityControl;
import javax.media.rtp.*;
import javax.media.rtp.event.*;
import javax.media.rtp.rtcp.*;
public class AVTransmitter implements ReceiveStreamListener, RemoteListener,
ControllerListener {
// Input MediaLocator
// Can be a file or http or capture source
private MediaLocator locator;
private String ipAddress;
private int portBase;
private Processor processor = null;
private RTPManager rtpMgrs[];
private int localPorts[];
private DataSource dataOutput = null;
private int local_data_port;
private Tx tx;
public AVTransmitter( Tx tx, int data_port) {
this.tx= tx;
local_data_port= data_port;
* Starts the transmission. Returns null if transmission started ok.
* Otherwise it returns a string with the reason why the setup failed.
public synchronized String start( String filename, Vector targets) {
String result;
locator= new MediaLocator( filename);
// Create a processor for the specified media locator
// and program it to output JPEG/RTP
result = createProcessor();
if (result != null) {
return result;
// Create an RTP session to transmit the output of the
// processor to the specified IP address and port no.
result = createTransmitter( targets);
if (result != null) {
processor.close();
processor = null;
return result;
// Start the transmission
processor.start();
return null;
* Use the RTPManager API to create sessions for each media
* track of the processor.
private String createTransmitter( Vector targets) {
// Cheated. Should have checked the type.
PushBufferDataSource pbds = (PushBufferDataSource)dataOutput;
PushBufferStream pbss[] = pbds.getStreams();
rtpMgrs = new RTPManager[pbss.length];
localPorts = new int[ pbss.length];
SessionAddress localAddr, destAddr;
InetAddress ipAddr;
SendStream sendStream;
int port;
SourceDescription srcDesList[];
for (int i = 0; i < pbss.length; i++) {
// for (int i = 0; i < 1; i++) {
try {
rtpMgrs[i] = RTPManager.newInstance();
port = local_data_port + 2*i;
localPorts[ i]= port;
localAddr = new SessionAddress( InetAddress.getLocalHost(),
port);
rtpMgrs.initialize( localAddr);
rtpMgrs[i].addReceiveStreamListener(this);
rtpMgrs[i].addRemoteListener(this);
for( int k= 0; k < targets.size(); k++) {
Target target= (Target) targets.elementAt( k);
int targetPort= new Integer( target.port).intValue();
addTarget( localPorts[ i], rtpMgrs[ i], target.ip, targetPort + 2*i);
sendStream = rtpMgrs[i].createSendStream(dataOutput, i);
sendStream.start();
} catch (Exception e) {
e.printStackTrace();
return e.getMessage();
return null;
public void addTarget( String ip, String port) {
for (int i= 0; i < rtpMgrs.length; i++) {
int targetPort= new Integer( port).intValue();
addTarget( localPorts[ i], rtpMgrs[ i], ip, targetPort + 2*i);
public void addTarget( int localPort, RTPManager mgr, String ip, int port) {
try {
SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
new Integer( port).intValue());
mgr.addTarget( addr);
tx.addTargetToList( localPort + "", ip, port + "");
} catch( Exception e) {
e.printStackTrace();
public void removeTarget( String ip, String port) {
try {
SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
new Integer( port).intValue());
for (int i= 0; i < rtpMgrs.length; i++) {
rtpMgrs[ i].removeTarget( addr, "target removed from transmitter.");
} catch( Exception e) {
e.printStackTrace();
boolean looping= true;
public void controllerUpdate( ControllerEvent ce) {
System.out.println( ce);
if( ce instanceof DurationUpdateEvent) {
Time duration= ((DurationUpdateEvent) ce).getDuration();
System.out.println( "duration: " + duration.getSeconds());
} else if( ce instanceof EndOfMediaEvent) {
System.out.println( "END OF MEDIA - looping=" + looping);
if( looping) {
processor.setMediaTime( new Time( 0));
processor.start();
public void setLooping( boolean flag) {
looping= flag;
public void update( ReceiveStreamEvent event) {
String timestamp= getTimestamp();
StringBuffer sb= new StringBuffer();
if( event instanceof InactiveReceiveStreamEvent) {
sb.append( timestamp + " Inactive Receive Stream");
} else if( event instanceof ByeEvent) {
sb.append( timestamp + " Bye");
} else {
System.out.println( "ReceiveStreamEvent: "+ event);
tx.rtcpReport( sb.toString());
public void update( RemoteEvent event) {
String timestamp= getTimestamp();
if( event instanceof ReceiverReportEvent) {
ReceiverReport rr= ((ReceiverReportEvent) event).getReport();
StringBuffer sb= new StringBuffer();
sb.append( timestamp + " RR");
if( rr != null) {
Participant participant= rr.getParticipant();
if( participant != null) {
sb.append( " from " + participant.getCNAME());
sb.append( " ssrc=" + rr.getSSRC());
} else {
sb.append( " ssrc=" + rr.getSSRC());
tx.rtcpReport( sb.toString());
} else {
System.out.println( "RemoteEvent: " + event);
private String getTimestamp() {
String timestamp;
Calendar calendar= Calendar.getInstance();
int hour= calendar.get( Calendar.HOUR_OF_DAY);
String hourStr= formatTime( hour);
int minute= calendar.get( Calendar.MINUTE);
String minuteStr= formatTime( minute);
int second= calendar.get( Calendar.SECOND);
String secondStr= formatTime( second);
timestamp= hourStr + ":" + minuteStr + ":" + secondStr;
return timestamp;
private String formatTime( int time) {
String timeStr;
if( time < 10) {
timeStr= "0" + time;
} else {
timeStr= "" + time;
return timeStr;
* Stops the transmission if already started
public void stop() {
synchronized (this) {
if (processor != null) {
processor.stop();
processor.close();
processor = null;
for (int i= 0; i < rtpMgrs.length; i++) {
rtpMgrs[ i].removeTargets( "Session ended.");
rtpMgrs[ i].dispose();
public String createProcessor() {
if (locator == null) {
return "Locator is null";
DataSource ds;
DataSource clone;
try {
ds = javax.media.Manager.createDataSource(locator);
} catch (Exception e) {
return "Couldn't create DataSource";
// Try to create a processor to handle the input media locator
try {
processor = javax.media.Manager.createProcessor(ds);
processor.addControllerListener( this);
} catch (NoProcessorException npe) {
return "Couldn't create processor";
} catch (IOException ioe) {
return "IOException creating processor";
// Wait for it to configure
boolean result = waitForState(processor, Processor.Configured);
if (result == false)
return "Couldn't configure processor";
// Get the tracks from the processor
TrackControl [] tracks = processor.getTrackControls();
// Do we have atleast one track?
if (tracks == null || tracks.length < 1)
return "Couldn't find tracks in processor";
// Set the output content descriptor to RAW_RTP
// This will limit the supported formats reported from
// Track.getSupportedFormats to only valid RTP formats.
ContentDescriptor cd = new ContentDescriptor(ContentDescriptor.RAW_RTP);
processor.setContentDescriptor(cd);
Format supported[];
Format chosen;
boolean atLeastOneTrack = false;
// Program the tracks.
for (int i = 0; i < tracks.length; i++) {
Format format = tracks[i].getFormat();
if (tracks[i].isEnabled()) {
supported = tracks[i].getSupportedFormats();
// We've set the output content to the RAW_RTP.
// So all the supported formats should work with RTP.
// We'll just pick the first one.
if (supported.length > 0) {
if (supported[0] instanceof VideoFormat) {
// For video formats, we should double check the
// sizes since not all formats work in all sizes.
chosen = checkForVideoSizes(tracks[i].getFormat(),
supported[0]);
} else
chosen = supported[0];
tracks[i].setFormat(chosen);
System.err.println("Track " + i + " is set to transmit as:");
System.err.println(" " + chosen);
atLeastOneTrack = true;
} else
tracks[i].setEnabled(false);
} else
tracks[i].setEnabled(false);
if (!atLeastOneTrack)
return "Couldn't set any of the tracks to a valid RTP format";
// Realize the processor. This will internally create a flow
// graph and attempt to create an output datasource for JPEG/RTP
// audio frames.
result = waitForState(processor, Controller.Realized);
if (result == false)
return "Couldn't realize processor";
// Set the JPEG quality to .5.
setJPEGQuality(processor, 0.5f);
// Get the output data source of the processor
dataOutput = processor.getDataOutput();
return null;
static SessionAddress destAddr1, destAddr2;
* For JPEG and H263, we know that they only work for particular
* sizes. So we'll perform extra checking here to make sure they
* are of the right sizes.
Format checkForVideoSizes(Format original, Format supported) {
int width, height;
Dimension size = ((VideoFormat)original).getSize();
Format jpegFmt = new Format(VideoFormat.JPEG_RTP);
Format h263Fmt = new Format(VideoFormat.H263_RTP);
if (supported.matches(jpegFmt)) {
// For JPEG, make sure width and height are divisible by 8.
width = (size.width % 8 == 0 ? size.width :
(int)(size.width / 8) * 8);
height = (size.height % 8 == 0 ? size.height :
(int)(size.height / 8) * 8);
} else if (supported.matches(h263Fmt)) {
// For H.263, we only support some specific sizes.
if (size.width < 128) {
width = 128;
height = 96;
} else if (size.width < 176) {
width = 176;
height = 144;
} else {
width = 352;
height = 288;
} else {
// We don't know this particular format. We'll just
// leave it alone then.
return supported;
return (new VideoFormat(null,
new Dimension(width, height),
Format.NOT_SPECIFIED,
null,
Format.NOT_SPECIFIED)).intersects(supported);
* Setting the encoding quality to the specified value on the JPEG encoder.
* 0.5 is a good default.
void setJPEGQuality(Player p, float val) {
Control cs[] = p.getControls();
QualityControl qc = null;
VideoFormat jpegFmt = new VideoFormat(VideoFormat.JPEG);
// Loop through the controls to find the Quality control for
// the JPEG encoder.
for (int i = 0; i < cs.length; i++) {
if (cs[i] instanceof QualityControl &&
cs[i] instanceof Owned) {
Object owner = ((Owned)cs[i]).getOwner();
// Check to see if the owner is a Codec.
// Then check for the output format.
if (owner instanceof Codec) {
Format fmts[] = ((Codec)owner).getSupportedOutputFormats(null);
for (int j = 0; j < fmts.length; j++) {
if (fmts[j].matches(jpegFmt)) {
qc = (QualityControl)cs[i];
qc.setQuality(val);
System.err.println("- Setting quality to " +
val + " on " + qc);
break;
if (qc != null)
break;
* Convenience methods to handle processor's state changes.
private Integer stateLock = new Integer(0);
private boolean failed = false;
Integer getStateLock() {
return stateLock;
void setFailed() {
failed = true;
private synchronized boolean waitForState(Processor p, int state) {
p.addControllerListener(new StateListener());
failed = false;
// Call the required method on the processor
if (state == Processor.Configured) {
p.configure();
} else if (state == Processor.Realized) {
p.realize();
// Wait until we get an event that confirms the
// success of the method, or a failure event.
// See StateListener inner class
while (p.getState() < state && !failed) {
synchronized (getStateLock()) {
try {
getStateLock().wait();
} catch (InterruptedException ie) {
return false;
if (failed)
return false;
else
return true;
* Inner Classes
class StateListener implements ControllerListener {
public void controllerUpdate(ControllerEvent ce) {
// If there was an error during configure or
// realizI do this all the time, I put my MBP to a 60 inch Sharp. If you have the video working do the simple thing first. Check to make sure your sound is on your TV and Mac. Then if that doesn't work go to System Prefrences and under sound go to a tab called Output and see if your TV is listed and if it is change it to that setting
Hope It Works
Maybe you are looking for
-
Problem installing Oracle forms and report in windows 7
I have a problem while installing Oracle forms and reports in windows 7 64 bit The error is : [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IY5_e_EApIRMyYAhMG1BuDGr00000B,0] [[ oracle.as.provisioning.exception.ASProvWorkflowException:
-
How do i resize my hard drive without erasing data
i have OS X 10.10.1 and i also dual boot my mac with windows 8.1. i have a 750 gb hard drive & on my windows partition i have 105 gb of free space but on my mac partition i have only 50 gb free
-
MY MSI 7900 GTX pci-512 , plz need ur help and openions
pc specs : intel 3.00 G DUO core 1 gig kingston 533 MHZ, used to be 2G ( explained below ) built in audology creative sound card MB : gigabyte , 975X PSU :Thermaltake 420 watt u can check it here http://www.dealtime.com/xPF-Thermaltake-Thermaltake
-
Joining two tables on two keys of differnt datat types
Hi, I have two two tables, create table table1( primkey1 double, name varchar(30)) create table table2( primkey2 varchar(40), name varchar(30)) Now I have to join these two table in RPD. I tried to join but i got an error. plz tell me the way to join
-
Numbers hangs / does not respond with Lion OS 10.7
I have the latest version of Numbers but it does not work with Lion OS X: Numbers hangs / stop responding on opening existing files or creating new files. When I run Numbers "Template chooser" appears, I chose an existing file, then the program repor