MacBook freeze after upgrading the hdd

Hello,
I have following problem with my MacBook. I have made a upgrade of my harddisk to a 500gb WD Blue Skorpio Harddisk. I made a backup of the old HDD and install the new HDD. After the changing, the computer boot normal. But then he freezes every time for a few seconds.
For Information: The HDD is partition into 2 GUID Tablet Parts. What is your recommandation. It is a problem of the HDD or it is a Problem of my MacBook.
I asked Western Digital for support, but I get no answer. I hope some knows the problem and can help me.
Perry_R

Hello Jay
Hello iyacyas
thank you for the fast response due my Problems. In the evening I will try Jays recommendation.
@iyacyas
The only reason to use two GUID Partitions is, to have a better overview about my files. In the main Partition I have all Mac OS files. The second Partition is for Medial file, like Music, Videos and Pictures. There is the folder of iTunes. I know, I didn´t need such differentiation. But to hold that were a good idea to get a better overview about my files. Sorry I worked too long with windows.
Perry_R

Similar Messages

  • MacBook freezes after shutting the screen closed down

    Since some time ago, my MacBook freezes when I close the screen down for substantial time like a few hours or maybe even an hour, so that I have to kill the MB by pressing the power button for a few seconds. I did this almost everyday for maybe a few weeks now. Perhaps this is the after effects of a fall and there is no cheap cure for it?

    Many here have reported no wake from sleep or failure to sleep, running 10.6.3 and other versions, on MacBooks and MBPro's, using Parallels and VMware. Some say deactivating the Sudden Motion Sensor and shutting down Parallels and VMware ,before sleeping, helped.
    DALE

  • Cant open doc files from the server on MacBook Air after upgrading to Maverick

    Cant open doc files from the server on MacBook Air after upgrading to Maverick, I can only open up docx file. Thank you!

    Thanks for the suggestion! I don't use Phantasm or VectorScribe (or any Astute Graphics plugins for that matter). I do, however, have a Wacom tablet and have a few plugins that concern using Blurb Book Creator as well as LiveSurface Context.
    I did the very unfortunate and foolish act of upgrading to Maverick without a backup, so postponing isn't an option for me.
    I geuss my question at this point would be, would it be worthwhile to wipe all the adobe products from my harddrive and re-install them? Or would that be a useless endeavor.
    I don't have an external hard-drive so backing up and re-installing the entire OS would be a bit much. Any suggestions?

  • I am using macbook air, after upgrading to os x mavericks, i am not able to mount my 1 tb seagate go flex hard drive , any solutions , also iPhoto is not upgrading , every time i try to upgrade, it shows an error.....

    i am using macbook air, after upgrading to os x mavericks, i am not able to mount my seagate 1 TB go flex hard drive, also iphoto upgrades crashes mid way ... what to do ?

    What exactly crashes?  iPhoto upgrades to a library or the application? 
    What format is the external HD?
    OT

  • Itunes freezes after upgrading to OS X Mavericks v10.9.3 on connecting iPhone 5

    Itunes freezes after upgrading to OS X Mavericks v10.9.3 on connecting iPhone 5.
    I tried it with a differnt Iphone and the results are the same. Any suggestions?

    Hi JZN1994,
    Welcome to the Apple Support Communities! I understand that after updating your computer to 10.9.3 iTunes stops responding when an iPhone is connected to it. There may be few different steps you will need to go through to get this resolved. I suggest working through the steps in the attached article.
    iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ts3219
    Thanks for reaching out, 
    -Joe

  • Photo Booth Freezes after upgrading to OS X Yosemite Wifi drops, iMac lags!

    Photo Booth Freezes after upgrading to OS X Yosemite Wifi drops, iMac lags!

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • My MacBook freezes after log in

    Help my MacBook freezes after I log in. 

    If you hold down the "shift" key on your keyboard when you log in, does the same thing happen?

  • After upgrading the new operating system, it seems some useful features no longer work such as when typing a message the text anticipates the next word and when trying to delete individual messages from a contact, you can no longer tap and hold to select

    After upgrading the new operating system on my Droid Razr M it seems some useful features no longer work such as when typing a message the text anticipates the next word and when trying to delete individual messages from a contact, you can no longer tap and hold to select multiple message you have to delete them individually or the entire thread. Is there a way to get these back?

    Well, that's kind of embarrassing. And I honestly thought I paid attention to that... It works perfectly now, thank you so much!
    As expected, cdm-git also works fine since DMs only work in the root mode as of now.
    Just for the record, both type commands output "/usr/bin/startx" and pacman -Q gives "systemd 215-4".
    Last edited by looki (2014-08-23 13:04:49)

  • Issue after upgrade the ASA5520 from 7.2.4 to 8.2.5,

    i  am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI  remote session getting disconnect in between in one of the outside  interface
    i  am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI  remote session getting disconnect in between the session at one of the  interface but working fine with another interface,
    i have outside  and backup interface which work on internet failover when internet  routed through backup interface the issue getting started but working  fine if traffic is going via outsid

    i  am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI  remote session getting disconnect in between in one of the outside  interface
    i  am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI  remote session getting disconnect in between the session at one of the  interface but working fine with another interface,
    i have outside  and backup interface which work on internet failover when internet  routed through backup interface the issue getting started but working  fine if traffic is going via outsid

  • I want to upgrade the HDD on Satellite L10

    HI
    I am new to the forum, I purchased a satellite l10 two years ago and was looking at upgrading my hard drive, looking at toshiba accessories It recommends I purchase an external hd, but this just means extra items to carry, can anyone advise or help me

    Hi
    Of course you can upgrade the HDD.
    If you want to upgrade the HDD you have buy one which is compatible and supported by BIOS.
    Not every HDD size is supported by BIOS. There is a limitation and bigger HDDs could be not recognized.
    The Sat L10 supports an enhanced IDE (ATA-6) interface and some units were delivered with the 40GB HDD.
    I think a 60GB HDD should be compatible. Maybe also a 80GB HDD but Im not 100% sure about this HDD size.
    If you want you can test it.
    regards

  • My keyboard freezes after using the option key... what gives?

    I have a 17" MacBookPro with OSX 10.6.8
    The problem:   My keyboard key freeze after using the " option key"  in Photoshop or  when downloading a file using the option key.
    I can usually use it 2 or 3 times before it makes a chirping cricket like sound… then my keys freeze up.? The only way to correct it is to restart.
    Anyone else have or had this issue?   it's frustrating.  What's the deal?

    hausman wrote:
    tianmiao0304 wrote:
    Thanks for your explanation!
    Can I just bring my laptop to the nearest service center and get this problem solved directly? You know, usually it will takes several days to receive the backup keyborad, I can't wait
    You'll have to phone the service center and ask. (When I lived not far from Lenovo's Canadian service center and wanted to bring in a ThinkPad for warranty repair they said that would be OK with them but my unit would be put on a queue the same as if I'd shipped it in. They simply didn't offer walk-in, while you wait service.)
    In the interim it may or may not be possible to reattach the key, even just temporarily, depending on whether it wasn't put on properly at the factory or if it's physically broken in some way. Or you could use an external keyboard until Lenovo sends you a replacement, etc.
    I've just call the local service center, he told me that he can not repair individual key, they can just replace the whole keyboard..... How bad luck I am!!!

  • I'm trying to install Adobe CC on the 2nd computer, a Macbook and after downloading the CC desktop app I double click to intall. When it looks to be done installing I go to double-click on the ourobouros icon at the top and I am rewarded with the spinning

    I'm trying to install Adobe CC on the 2nd computer, a Macbook and after downloading the CC desktop app I double click to intall. When it looks to be done installing I go to double-click on the ourobouros icon at the top and I am rewarded with the spinning beach all of death. Any suggestions?

    Hi,
    Please refer to the help document below to fix the issue:
    App doesn't open | Progress wheel spins continually
    Regards,
    Sheena

  • Why my hp mini 5101 the "7" key doesnt work after upgraded the bios?

    why my hp mini 5101 the "7" key doesnt work after upgraded the bios?
    The current bios version is F.07

    korpx,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • CS5 can't preview the fonts image after upgrade the OS X 10.10.1

    My CS5 can't preview the fonts image after upgrade the OS X 10.10.1,
    Wanna try to reinstall the AI but my disc read error. Anyone has this problem or solution, Many Thanks!!

    Thanks but can't find this "system transparency" setting inside the illustrator. Search the key word doesn't work...

  • Automation error element not found in vb6 2147319765 after upgrading the os

    Hi we had updated our OS to windows 7 from XP.Previously we had an application in XP which is built on Vb 6 .The application throws an error message like Automation error --element not found with error code 2147319765 .The application shows the same error
    message even after I ran the application in XP compatability mode.
    The application is using data from other servers and all the servers are windows server 2003.
    muneer

    Double post:
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/229b4e46-9bcb-411e-901e-fec376dc36da/automation-error-element-not-found-in-vb6-2147319765-after-upgrading-the-os
    This forum is about VB.Net. If your question is about a VB6 project, have a look here:
    Where to post your VB 6 questions
    Armin

Maybe you are looking for

  • How to createWebservice from Functional Module inECC system and how to test

    Hi all i have one functional module in backend system i.e BAPI_GL_ACC_GETLIST. now i want to create a Webservice from the above functional module. once the webservice is ready in ECC system then how do we access in webdynpro thru model. i want to tes

  • Customer Credit Card Informaiton.

    Hi All, How differentiate the credit cards are assigned at customer level and site level in iby_creditcard table. I am actually using the follwoing query to get the customer credit card information. SELECT o628511.card_owner_id , o628511.instrument_t

  • How to lock wbs element

    Hi all, I would like to seek your help on how to lock wbs element in a report program. Is there any bapi or function module for that? The requirement is to lock the wbs element when the user process/run that particular WBS. If the user exit to the re

  • Whenever I try to open Netflix, I get a message saying "Netflix is currently unavailable. Try again later."

    I am able to view it on all other devices in our household, including, two macbooks, and ipad and a wii.  However on appletv it will not work.  This leads me to believe that it is a problem on apple's side.  When can I expect Netflix to start working

  • Remote Control Button Assignment

    I'm having trouble setting the Menu button on my remote. In the inspector I assign the main menu on my dvd to the menu button. However, when you hit the menu button on the remote nothing happens. THen after selecting a track and then hitting the butt