Macbook freezes after change of wifi location

Finally I can reproduce the freezing of my macbook air. If I change from wifi location for example i go to work from home the following happens:
the MBA will not fall a sleep resulting in a very hot MBA in my bag.
the MBA will fall a sleep but it is not possible to wake it up again
the MBA will fall a sleep and is able to wake up again after opening the lid but now it will freeze the entire mac within 5-10 minutes.
I have to push the power button for a long time in either cases.
I just did a complete restore so i have no extra software installed.
Is repair the only option here?

Can you reproduce the problem after erasing the startup volume and installing OS X, without restoring anything from a backup? If so, the machine needs to be serviced.

Similar Messages

My MacBook freezes after log in

Help my MacBook freezes after I log in.

If you hold down the "shift" key on your keyboard when you log in, does the same thing happen?

MacBook freezes after shutting the screen closed down

Since some time ago, my MacBook freezes when I close the screen down for substantial time like a few hours or maybe even an hour, so that I have to kill the MB by pressing the power button for a few seconds. I did this almost everyday for maybe a few weeks now. Perhaps this is the after effects of a fall and there is no cheap cure for it?

Many here have reported no wake from sleep or failure to sleep, running 10.6.3 and other versions, on MacBooks and MBPro's, using Parallels and VMware. Some say deactivating the Sudden Motion Sensor and shutting down Parallels and VMware ,before sleeping, helped.
DALE

Macbook freezing after waking from sleep

My 4 GB RAM macbook freezes for 30 seconds after I wake it from sleep mode. Sometimes it is unresponsive and sometimes the beachball comes up. I have 200 gigs of free space and no login items. The bluetooth wake is also turned off. What is the problem?

I have noticed similar behaviour. I think it depends on the network activity being carried out when I closed the lid, and maybe it has to wait for something to time out. I don't really know, I'm just guessing.
I have noticed that when it happens, I have to close the lid and watch the light on the front. This will be solidly lit. When it starts "breathing" I can open my MacBook again and it will work ok.
Bob

Locating files after changing iTune file location

iTunes 7 XP Pro
I changed the default location and moved the contents of the iTunes Music folder, however iTunes does not automatically recognize the new location for existing files. Is there anyway I can globally change the location in iTunes so I do not have to change the location of hundreds of files one at a time?
Thank you

The location you set in preference only sets the location for all FUTURE additions to the library. Anything already in your iTunes library will remain in the location they were already being accessed.
If you want to move all the files to the new location, then use the consolidate command. This command copies all files not located in the preference location into that location, thus consolidating them to one location. As I said, I think it copies, not moves the files. So after a consolidate, you may need to go and delete the old locations manually.
Patrick

After changing my wifi password I am having trouble finding my time machine on my network, any help please?

I have just changed my wifi password for added security but cannot find my time machine on my network. In the status bar it says that the time machine is not configured (although it has been) and every time I try to find it using airport utlity it remains hidden. Any help would be appreciated as I have a recent back up on there.

First off, thank you so much to everyone who is trying to help! I really appreciate it!
I opened the "backups.backupdb" folder as you suggested "jeffreyfromtas" and found 2 folders:
dvlynn's iMac and
dvlynn's iMac 2.
The 1st folder seems to contain all the backups from the 1st time it backed up in Sept. 2010 until the last time it backed up without error in January of this year.
The 2nd folder contains one file titled "2014-01-03-175020.inProgress"
I purchased this time machine backup drive in 2010 after the origional drive on my iMac crashed and was replaced. When that happened my system was updated to Snow Leopard where it is now. The only major changes I have made are that I moved a lot of large video files off my main drive onto external hard drives to make more room on the iMac.
Other than that everything has stayed the same.
I'm asking it what size the 2 folders are but it's taking forever to answer and I venture to guess it will be 99.99% in the 1st folder and 0.01% in the second folder.
Let me know if that makes any sense.
And thanks again!

Help: Macbook freezes after sleep and gray screen freeze on startup

I've got a new MacBook (45 days old, minimal usage) and I'm starting to have some problems.
When my computer goes to sleep after inactivity I have a hard time waking it. The screen turns on right away but the mouse/cursor remains frozen. The computer does not respond to any keyboard commands. I usually have to reboot the machine when this happens. I noticed this problem a few weeks ago and it has since become more and more frequent.
I've also noticed that with some regularity my computer freezes on the gray screen during start up and never reaches the mac icon. This has become more and more frequent since I first noticed the initial problem and happens one in every 3 or 4 startups.
I haven't installed any new software except for the regular software upgrades. Nothing extraordinary.
Is it possible that these problems are related? Am I doing something wrong?
Any help would be greatly appreciated.

The grey screen on startup may be the known issue, especially if you start to get vertical lines on the screen. If you can reboot using PRAM reset, go to the displays control panel, set the resolution to something besides your current resolution, then revert to your original setting. That should fix that part.
As far as the freezing after sleep goes, I had a similar issue where the macbook would not actually go to sleep (white light stayed solid), and opening the lid would result in a dimmed screen that I had to force-shut down the computer to get out of. After sending it in for RSD, this seems to have been resolved.

MacBook freeze after upgrading the hdd

Hello,
I have following problem with my MacBook. I have made a upgrade of my harddisk to a 500gb WD Blue Skorpio Harddisk. I made a backup of the old HDD and install the new HDD. After the changing, the computer boot normal. But then he freezes every time for a few seconds.
For Information: The HDD is partition into 2 GUID Tablet Parts. What is your recommandation. It is a problem of the HDD or it is a Problem of my MacBook.
I asked Western Digital for support, but I get no answer. I hope some knows the problem and can help me.
Perry_R

Hello Jay
Hello iyacyas
thank you for the fast response due my Problems. In the evening I will try Jays recommendation.
@iyacyas
The only reason to use two GUID Partitions is, to have a better overview about my files. In the main Partition I have all Mac OS files. The second Partition is for Medial file, like Music, Videos and Pictures. There is the folder of iTunes. I know, I didn´t need such differentiation. But to hold that were a good idea to get a better overview about my files. Sorry I worked too long with windows.
Perry_R

Macbook Freezes after 4 GB RAM upgrade

I work on many Macs for my company, and we have been upgrading our Macbooks with 4 GB of RAM standard. But this causes the screen to freeze, image to break up into different colors and locks up the whole system.
I thought it was the OCZ RAM we were using, so we switched to Crucial. But the same problem exists, and it exists on over 10 machines so it cannot be that all of this RAM is failing. This must be a problem with the unibodies or with OS X?

Please note, I am fairly new to Mac, and only found this info after much searching on-line...
I also have had problems after upgrading to 4GB of RAM, I bought Kingston from Best Buy in Edmonton, AB. I have spent a great deal of time searching for a solution, and just thought I would share what I have found.
It seems to be an issue with the NVIDIA GeForce 9400M graphics card and the way it accesses memory, and it seems to affect anything over 3GB of RAM. Now that being said, on Nvidia's website, with some searching there is a pdf document stating which RAM is compatible with this video card. I should mention that this issue also affects MacBook Pro users with the 9400/9600 graphics card. According to the pdf, my Kingston memory is not on the compatible list...I'll try to include this list:
The tables below list the SO-DIMMs that NVIDIA plans to support on their GeForce 9400M G platform.
Note: Using an SO-DIMM from this list does not imply reduced or simpler design validation on the part of the OEM. NVIDIA recommends customers to perform their full suite of memory interface design validation testing on their systems.
The information in the following tables is preliminary and will be updated as necessary. Table 1. DDR3 SODIMM
Manufacturer
Speed
Latency
Density
Part number
Elpida
DDR3-1333
9-9-9
2GB
EBJ21UE8BASA-DJ-E
Elpida
DDR3-1333
9-9-9
1GB
EBJ11UE6BASA-DJ-E
Elpida
DDR3-1066
7-7-7
2GB
EBJ21UE8BASA-AE-E
Elpida
DDR3-1066
7-7-7
1GB
EBJ11UE6BASA-AE-E
Elpida
DDR3-800
5-5-5
2GB
EBJ21UE8BASA-8A-E
Elpida
DDR3-800
5-5-5
1GB
EBJ11UE6BASA-8A-E
Hynix
DDR3-1333
9-9-9
2GB
HMT125S6AFP8C-H9N0
Hynix
DDR3-1333
9-9-9
1GB
HMT112S6AFP6C-H9N0
Hynix
DDR3-1066
7-7-7
2GB
HMT125S6AFP8C-G7N0
Hynix
DDR3-1066
7-7-7
1GB
HMT112S6AFP6C-G7N0
Hynix
DDR3-1066
7-7-7
512MB
HMT164S6AFP6C-G7N0
Hynix
DDR3-800
6-6-6
2GB
HYMT125S64ZNF8-S6
Hynix
DDR3-800
6-6-6
1GB
HYMP112S64CP6-S6
Micron
DDR3-1333
9-9-9
1GB
MT8JSF12864HY-1G4DZES
Micron
DDR3-1333
9-9-9
512MB
MT4JSF6464HY-1G4BZES
Micron
DDR3-1066
7-7-7
4GB
MT16JSS51264HY-1G1AZES
Micron
DDR3-1066
7-7-7
2GB
MT16JSF25664HY-1G1D1
Micron
DDR3-1066
7-7-7
1GB
MT8JSF12864HZ-1G1D1
Micron
DDR3-1066
7-7-7
512MB
MT4JSF6464HY-1G1B1
Nanya
DDR3-1333
9-9-9
2GB
NT2GC64B8HA1NS-CG
GeForce 9400M G Memory AVL
Manufacturer Speed Latency Density Part number
Nanya
DDR3-1333
9-9-9
1GB
NT1GC64BH8A1PS-CG
Nanya
DDR3-1066
7-7-7
2GB
NT2GC64B8A1NS-BE
Nanya
DDR3-1066
7-7-7
1GB
NT1GC54BH8A1PS-BE
Qimonda
DDR3-1333
8-8-8
2GB
IMSH2GS13A1F1CT-13G
Qimonda
DDR3-1333
8-8-8
1GB
IMSH1GS14A1F1CT-13G
Qimonda
DDR3-1066
7-7-7
2GB
IMSH2GS13A1F1CT10F
Qimonda
DDR3-1066
7-7-7
1GB
IMSH1GS14A1F1CT10F
Samsung
DDR3-1333
9-9-9
2GB
M471B5673DZ1-CH9
Samsung
DDR3-1333
9-9-9
1GB
M471B2874DZ1-CH9
Samsung
DDR3-1333
9-9-9
512MB
M471B6474DZ1-CH9
Samsung
DDR3-1066
7-7-7
2GB
M471B5673DZ1-CF8
Samsung
DDR3-1066
7-7-7
1GB
M471B2874DZ1-CF8
Samsung
DDR3-1066
7-7-7
512MB
M471B6474DZ1-CF8
Samsung
DDR3-800
6-6-6
2GB
M471B5673DZ1-CF7
Samsung
DDR3-800
6-6-6
1GB
M471B2874CZ1-CF7
Samsung
DDR3-800
6-6-6
1GB
M471B2874DZ1-CF7
Samsung
DDR3-800
6-6-6
512MB
M471B6474DZ1-CF7
Samsung
DDR3-800
6-6-6
512MB
M471B6474CZ1-CF7 March
The first part is the manufactrer name, next is type of memory, then latency, then density, then part number.
Another solution seems to be to edit the com.Apple.Boot.plist to set maxmem to 3456, which cuts available memory after rebooting to 3.5GB, on my MacBook, I got fair results with 3072, basically 3GB, it doesn't freeze as often, although I haven't played any movies, etc, for a few days, which always seemed to lead to my freezes. But the system seems much more stable for the moment.
Another solution which I am going to test when I get home and have access to my original RAM is to put one of the 1GB sodimms which came with my machine in the first slot, and one of my Kingston modules into the other slot, I've read that this solves the problem completely. Now I realize this leaves you with 3GB Ram, not the 4 I wanted, but further research showed me that the performance hit is not that significant from 3 to 4 GB, There are a couple of websites with testing results for different RAM configurations, and for my needs, the difference is minimal, I know that may not be acceptable to everyone. If I had bookmarked one of these pages, I would include the link.
Another solution seems to be a change to one of the Kext file, link is here: http://www.insanelymac.com/forum/index.php?showtopic=127611
but this is related to kext for MacOSX on a PC, and I don't know enough about dealing with kext files to feel comfortable doing things like this to my MB.
I don't know if anyone else will find this useful, but if it does, great. In the meantime, I will be able to test the 3GB RAM configuration on Friday, and will test out the MB with movies, etc and post how it goes... one test I read about is to use the program REMBER, and do multiple hard drive searches, etc while it is running, according to the website I found that on, it leads to the freezing fairly rapidly, so at least the problem can be reproducible for those who take their Mac Books or Mac Book Pros into an Apple Genius Bar or where ever so that they can see the freeze in action.
Cheers,
Dan

T43p - Mouse pointer freezes after changing the battery to a new one

Hello,
I have bought a new battery for my IBM Thinkpad T43p. In the description of the new battery I have seen that this battery is compatible with T43 series. Battery details are: DC 10.8V 5200mAh/56Wh. Replace: 08K8214.
My problem is:
I have ordered a new battery for my Thinkpad T43p but when I turned off the notebook and replace the old battery with the new one the notebook became strange. I use Windows XP Prof on this computer and when the login screen appeared and during I was typing my user name and password the mouse pointer was freezed and I had to turn off the computer. It was happened within approx 1 minute after the Login screen appeared. The symptom was the same with or without plugged in AC charger. I have tried several times and the same behavior was happened. When I changed back the old battery the computer became normal again without any freezing. The fan was working properly in both cases. The symptom is the same if I change the battery during AC charging and using Windows.
I don't have an idea about the reason of it. Can you help me with ideas?
Thanks in advance,
Slider

Pull the battery out and run the machine on AC only. Does it freeze now?
If it doesn't, the "new" battery needs to be replaced.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

After installing ox lion macbook freezes after start up

so... just like the title says. after installing ox lion on my macbook pro, sometimes it freezes right after start up, and I could not click on anything, and i had to force it to shut down by holding the power button.
I don't know if anybody else have the same problem or not? is it a bug or something? hope it can be solved soon.....

I just don't know if this is showing some sort of problem..
If your Mac boots to the Desktop without freezing, nothing to worry about. The screen color may vary somewhat betweeen one Mac OS X to another.
This can help startup issues also.
Disable the Lion "resume" feature ...
Open System Preferences > General
Deselect: Restore windows when quitting and re-opening apps
edited by: cs

Macbook freeze after Lion

My Macbook Pro freezes every now and again, especially when using Safari. This happens after an upgrade to Lion.
When I pop out the forced stopping window and give it the command to stop Safari, that window to freezes.
Mouse pointer still moved though, but can't select anything outside the frozen window's scope.
Safari was not running full-screen this time, so the link I suggestede earlier is not confirmed.
Hope This Helps in solving the issue.

I am having the same problem except I get the pinwheel and cant do anything, it just freezes randomly. However mine freezes upon reboots if i do not leave that box checked that says to reopen windows. I have to hold the power button down to shut it down then it will come back up ok. I hope they fix this with a patch soon especially since I had 0 problems before the upgrade

MacBook freeze after desktop loads

I repaired permissions, and this still occurs. I have a new insall of OS 10.7 as I purcahsed a new HD for my MacBook.
Any ideas what would cause this?
Any ideas how to reover or force a reboot when it hangs? Right now I am just holding the power button until the MacBook powers off.

You're responding to a post from five months ago. If that's how long you had to wait for the issue to reappear, it may never be resolved.
If you have more than one user account, these instructions must be carried out as an administrator.
If you have an optical drive, make sure there is no disc in it.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged during the time something abnormal was happening. That time might be before or after the boot.
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. If the problem is a system crash or freeze, post the messages from before the boot time, when the system was about to crash or was failing to shut down. In either case, please include the BOOT_TIME message at the beginning or the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

My Macbook freezes after using it for awhile

I startup my MacBook (aluminum 2008 verions) running lion 10.7.1 and after about 5 minutes of using it, my computer displays the rainbow cursor and freezes. I am unable to click on anything or force quit.
My processor is 2.4 Ghz and has 2Gb ram.
It would be great if someone could give me any thoughts ASAP as I have an assignment due next week and need my computer.
Thanks in advance

Your problem is caused by third-party software that you installed. I'd need more information to be more specific.
Reboot as usual (not in safe mode) if you haven't already done so. Launch the Terminal application, copy or drag -- do not type -- the line of text below into the window, and press return:
kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Next, do the same thing with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
That's one line, not two. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Next, this command:
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Again, one line. Finally, one more:
ls -1 /Library/{InputManagers,StartupItems}
Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal.

Freezes after changing an i5 cpu for i7

Hello,
I've changed my Intel Core i5 680 cpu @ 3,60 GHz which worked pretty well by an Intel Core i7 880 @ 3,06 GHz expecting more performance.
Since I've changed the cpu I'm experiencing some applications freezes for some seconds until they respond again, but I have no error in the terminal output. This affects to other applications too. For example if I'm watching a video while I'm surfing the internet with firefox 27 and it freezes, the video stop playing, and I can't launch any other application, applications menu does not drop... almost all applications freezes for some seconds until it all respond again. When these freezes happens I see the cpu monitor raises up to 50% more or less as a plateau during the freeze.
I've already reinstalled the kernel with 'pacman -S linux' but haven't solved the problem.
The last time I've had to reboot pushing the power button manually because I began to get "bus error" in every application I tried to start from terminal.
I want to know if it is a cpu malfunction because I've just purchased it used.
Is it a cpu malfunction or is it that I have to reinstall Archlinux?

I've come back to the i7 again. I've experienced the same random frozens but now I've been able to do a dmesg after the first one. This is the last part of the dmesg output:
[ 0.541792] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.541802] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.541833] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.541834] vesafb: scrolling: redraw
[ 0.541836] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.541986] vesafb: framebuffer at 0xe5000000, mapped to 0xffffc90005b00000, using 3072k, total 3072k
[ 0.641501] Console: switching to colour frame buffer device 128x48
[ 0.740969] fb0: VESA VGA frame buffer device
[ 0.740977] intel_idle: MWAIT substates: 0x1120
[ 0.740987] intel_idle: v0.4 model 0x1E
[ 0.740988] intel_idle: lapic_timer_reliable_states 0x2
[ 0.741149] GHES: HEST is not enabled!
[ 0.741190] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.761747] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.762021] Linux agpgart interface v0.103
[ 0.762076] rtc_cmos 00:02: RTC can wake from S4
[ 0.762186] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.762211] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.762285] drop_monitor: Initializing network drop monitor service
[ 0.762330] TCP: cubic registered
[ 0.762398] NET: Registered protocol family 10
[ 0.762522] NET: Registered protocol family 17
[ 0.762528] Key type dns_resolver registered
[ 0.762762] registered taskstats version 1
[ 0.763673] Magic number: 2:688:102
[ 0.763769] rtc_cmos 00:02: setting system clock to 2014-02-22 00:07:38 UTC (1393027658)
[ 0.763787] PM: Hibernation image not present or could not be loaded.
[ 0.764686] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
[ 0.764687] Write protecting the kernel read-only data: 8192k
[ 0.766485] Freeing unused kernel memory: 864K (ffff880001528000 - ffff880001600000)
[ 0.767645] Freeing unused kernel memory: 376K (ffff8800017a2000 - ffff880001800000)
[ 0.775079] systemd-udevd[82]: starting version 208
[ 0.776016] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.778838] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.778866] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.797207] ACPI: bus type USB registered
[ 0.797230] usbcore: registered new interface driver usbfs
[ 0.797237] usbcore: registered new interface driver hub
[ 0.797290] usbcore: registered new device driver usb
[ 0.798123] SCSI subsystem initialized
[ 0.798529] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.799364] libata version 3.00 loaded.
[ 0.799537] ehci-pci: EHCI PCI platform driver
[ 0.799663] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.799669] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.799681] ehci-pci 0000:00:1a.0: debug port 2
[ 0.803618] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
[ 0.803637] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3ffe000
[ 0.804588] ahci 0000:09:00.0: version 3.0
[ 0.804655] ahci 0000:09:00.0: irq 50 for MSI/MSI-X
[ 0.804718] ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.804721] ahci 0000:09:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 0.804732] ahci 0000:09:00.0: port 0 can do FBS, forcing FBSCP
[ 0.804775] ahci 0000:09:00.0: port 1 can do FBS, forcing FBSCP
[ 0.805146] scsi0 : ahci
[ 0.805280] scsi1 : ahci
[ 0.805335] ata1: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7eff900 irq 50
[ 0.805337] ata2: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7eff980 irq 50
[ 0.813358] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.813568] hub 1-0:1.0: USB hub found
[ 0.813573] hub 1-0:1.0: 2 ports detected
[ 0.813677] xhci_hcd 0000:08:00.0: xHCI Host Controller
[ 0.813682] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 2
[ 0.813851] xhci_hcd 0000:08:00.0: irq 51 for MSI/MSI-X
[ 0.813856] xhci_hcd 0000:08:00.0: irq 52 for MSI/MSI-X
[ 0.813861] xhci_hcd 0000:08:00.0: irq 53 for MSI/MSI-X
[ 0.813865] xhci_hcd 0000:08:00.0: irq 54 for MSI/MSI-X
[ 0.813870] xhci_hcd 0000:08:00.0: irq 55 for MSI/MSI-X
[ 0.813874] xhci_hcd 0000:08:00.0: irq 56 for MSI/MSI-X
[ 0.813879] xhci_hcd 0000:08:00.0: irq 57 for MSI/MSI-X
[ 0.813883] xhci_hcd 0000:08:00.0: irq 58 for MSI/MSI-X
[ 0.814222] hub 2-0:1.0: USB hub found
[ 0.814230] hub 2-0:1.0: 2 ports detected
[ 0.814335] xhci_hcd 0000:08:00.0: xHCI Host Controller
[ 0.814338] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
[ 0.814362] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.814377] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.814395] ehci-pci 0000:00:1d.0: debug port 2
[ 0.818336] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
[ 0.818353] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3ffd000
[ 0.818494] hub 3-0:1.0: USB hub found
[ 0.818506] hub 3-0:1.0: 2 ports detected
[ 0.826687] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.826825] hub 4-0:1.0: USB hub found
[ 0.826831] hub 4-0:1.0: 2 ports detected
[ 0.826917] ata_piix 0000:00:1f.2: version 2.13
[ 0.827013] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.828206] scsi2 : ata_piix
[ 0.828283] scsi3 : ata_piix
[ 0.828323] ata3: SATA max UDMA/133 cmd 0x8c00 ctl 0x8880 bmdma 0x8400 irq 21
[ 0.828328] ata4: SATA max UDMA/133 cmd 0x8800 ctl 0x8480 bmdma 0x8408 irq 21
[ 0.828398] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.829287] scsi4 : ata_piix
[ 0.829401] scsi5 : ata_piix
[ 0.829442] ata5: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 21
[ 0.829446] ata6: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 21
[ 0.870370] firewire_ohci 0000:0c:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.120293] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.123613] ata2: SATA link down (SStatus 0 SControl 370)
[ 1.157846] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.168602] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.244278] hub 1-1:1.0: USB hub found
[ 1.244361] hub 1-1:1.0: 6 ports detected
[ 1.290308] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 370)
[ 1.292100] ata1.00: ATA-8: ST32000641AS, CC13, max UDMA/133
[ 1.292106] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.294085] ata1.00: configured for UDMA/133
[ 1.294487] scsi 0:0:0:0: Direct-Access ATA ST32000641AS CC13 PQ: 0 ANSI: 5
[ 1.295533] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.295920] sd 0:0:0:0: [sda] Write Protect is off
[ 1.295927] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.296134] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.350262] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.370503] firewire_core 0000:0c:03.0: created device fw0: GUID 001e8c0000cf230a, S400
[ 1.382765] sda: sda1 sda2 < sda5 sda6 > sda3 sda4
[ 1.384890] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.477644] hub 4-1:1.0: USB hub found
[ 1.477706] hub 4-1:1.0: 8 ports detected
[ 1.478163] ata3.00: SATA link down (SStatus 0 SControl 300)
[ 1.478175] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 1.489302] ata4.00: SATA link down (SStatus 0 SControl 300)
[ 1.489314] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 1.490789] scsi6 : pata_marvell
[ 1.490864] scsi7 : pata_marvell
[ 1.490898] ata7: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 18
[ 1.490900] ata8: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 18
[ 1.530283] tsc: Refined TSC clocksource calibration: 3076.211 MHz
[ 1.743898] usb 4-1.5: new low-speed USB device number 3 using ehci-pci
[ 1.839559] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.842220] usbcore: registered new interface driver usbhid
[ 1.842221] usbhid: USB HID core driver
[ 1.842681] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input2
[ 1.842873] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
[ 1.904037] usb 4-1.6: new low-speed USB device number 4 using ehci-pci
[ 1.995810] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input3
[ 1.995929] hid-generic 0003:0603:00F2.0002: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input0
[ 2.001658] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.1/input/input4
[ 2.002017] hid-generic 0003:0603:00F2.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input1
[ 2.224921] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.531128] Switched to clocksource tsc
[ 2.619260] random: nonblocking pool is initialized
[ 2.812798] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 2.823170] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 2.837440] systemd[1]: Set hostname to <ArchLinux>.
[ 3.575780] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.575819] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.575829] systemd[1]: Starting Remote File Systems.
[ 3.576854] systemd[1]: Reached target Remote File Systems.
[ 3.576863] systemd[1]: Expecting device sys-subsystem-net-devices-enp2s0.device...
[ 3.578178] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.579468] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.579475] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.580605] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.580612] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.581827] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.581834] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.582895] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.582906] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.582933] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.582954] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.584746] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.584755] systemd[1]: Starting Journal Socket.
[ 3.585688] systemd[1]: Listening on Journal Socket.
[ 3.585702] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.587447] systemd[1]: Starting Apply Kernel Variables...
[ 3.590085] systemd[1]: Started Load Kernel Modules.
[ 3.590103] systemd[1]: Mounting Configuration File System...
[ 3.591247] systemd[1]: Mounting Huge Pages File System...
[ 3.592327] systemd[1]: Starting Setup Virtual Console...
[ 3.608365] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.611001] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.611054] systemd[1]: Starting Journal Service...
[ 3.612925] systemd[1]: Started Journal Service.
[ 3.932314] systemd-journald[155]: Vacuuming done, freed 0 bytes
[ 4.064664] EXT4-fs (sda4): re-mounted. Opts: data=ordered
[ 4.688884] systemd-udevd[189]: starting version 208
[ 5.199113] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 5.199117] ACPI: Power Button [PWRB]
[ 5.199151] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.199153] ACPI: Power Button [PWRF]
[ 5.218714] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
[ 5.218718] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.218721] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS1 1 (20131115/utaddress-251)
[ 5.218723] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 2 (20131115/utaddress-251)
[ 5.218725] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.218726] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS1 1 (20131115/utaddress-251)
[ 5.218727] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 2 (20131115/utaddress-251)
[ 5.218729] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.218741] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.250594] wmi: Mapper loaded
[ 5.252023] ATK0110 ATK0110:00: EC enabled
[ 5.330570] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x4
[ 5.376652] platform microcode: Direct firmware load failed with error -2
[ 5.376654] platform microcode: Falling back to user helper
[ 5.384674] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 5.387099] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x4
[ 5.387109] platform microcode: Direct firmware load failed with error -2
[ 5.387110] platform microcode: Falling back to user helper
[ 5.388452] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x4
[ 5.388460] platform microcode: Direct firmware load failed with error -2
[ 5.388462] platform microcode: Falling back to user helper
[ 5.388853] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x4
[ 5.388863] platform microcode: Direct firmware load failed with error -2
[ 5.388865] platform microcode: Falling back to user helper
[ 5.389097] microcode: CPU4 sig=0x106e5, pf=0x2, revision=0x4
[ 5.389106] platform microcode: Direct firmware load failed with error -2
[ 5.389107] platform microcode: Falling back to user helper
[ 5.389433] microcode: CPU5 sig=0x106e5, pf=0x2, revision=0x4
[ 5.389443] platform microcode: Direct firmware load failed with error -2
[ 5.389445] platform microcode: Falling back to user helper
[ 5.389824] microcode: CPU6 sig=0x106e5, pf=0x2, revision=0x4
[ 5.389833] platform microcode: Direct firmware load failed with error -2
[ 5.389835] platform microcode: Falling back to user helper
[ 5.390239] microcode: CPU7 sig=0x106e5, pf=0x2, revision=0x4
[ 5.390244] EDAC MC: Ver: 3.0.0
[ 5.390247] platform microcode: Direct firmware load failed with error -2
[ 5.390248] platform microcode: Falling back to user helper
[ 5.390727] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 5.393902] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
[ 5.393942] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[ 5.393947] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 5.426858] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
[ 5.443613] iTCO_vendor_support: vendor-support=0
[ 5.447340] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 5.447359] iTCO_wdt: Found a H57 TCO device (Version=2, TCOBASE=0x0860)
[ 5.447435] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.469753] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 5.498371] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 5.537719] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 5.537856] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 5.537960] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 5.538051] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 5.538118] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 5.538220] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 5.538259] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.538300] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.538552] hda_intel: Disabling MSI
[ 5.538559] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 5.773056] mousedev: PS/2 mouse device common for all mice
[ 6.215598] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input20
[ 6.215877] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input19
[ 6.216144] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input18
[ 6.216410] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input17
[ 6.217997] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.218340] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
[ 6.221830] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.293514] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.293521] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 6.293694] r8169 0000:02:00.0: irq 61 for MSI/MSI-X
[ 6.293809] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xffffc900087fe000, 48:5b:39:10:75:8c, XID 083000c0 IRQ 61
[ 6.293810] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 6.342136] systemd-udevd[193]: renamed network interface eth0 to enp2s0
[ 6.373838] [drm] Initialized drm 1.1.0 20060810
[ 6.671871] nvidia: module license 'NVIDIA' taints kernel.
[ 6.671874] Disabling lock debugging due to kernel taint
[ 6.678484] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 6.678686] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 6.678693] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014
[ 7.374846] fuse init (API version 7.22)
[ 7.391646] Adding 10484732k swap on /dev/sda3. Priority:-1 extents:1 across:10484732k FS
[ 7.899600] systemd-journald[155]: Received request to flush runtime journal from PID 1
[ 9.904737] r8169 0000:02:00.0 enp2s0: link down
[ 9.904751] r8169 0000:02:00.0 enp2s0: link down
[ 9.904759] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 11.796534] r8169 0000:02:00.0 enp2s0: link up
[ 11.796546] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 14.442672] nvidia 0000:01:00.0: irq 62 for MSI/MSI-X
[ 15.067397] NVRM: Your system is not currently configured to drive a VGA console
[ 15.067400] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 15.067402] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 15.067403] NVRM: drivers including, but not limited to, vesafb, may result in
[ 15.067404] NVRM: corruption and stability problems, and is not supported.
[ 26.171382] type=1006 audit(1393024083.894:2): pid=386 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1
[ 26.265105] type=1006 audit(1393024083.991:3): pid=525 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=2 res=1
[ 35.539660] hda-codec: out of range cmd 3:5:707:ffffffff
[ 351.605213] nvidia 0000:01:00.0: irq 62 for MSI/MSI-X
[ 357.785261] type=1006 audit(1393024415.388:4): pid=386 uid=0 old auid=1000 new auid=1000 old ses=1 new ses=3 res=1
[ 365.084560] hda-codec: out of range cmd 0:5:707:ffffffbf
[ 424.713298] ata1.00: exception Emask 0x0 SAct 0x7ff0003f SErr 0x0 action 0x6 frozen
[ 424.713307] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713315] ata1.00: cmd 60/b8:00:40:de:65/00:00:24:00:00/40 tag 0 ncq 94208 in
res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 424.713320] ata1.00: status: { DRDY }
[ 424.713323] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713331] ata1.00: cmd 60/08:08:f8:eb:bd/00:00:3b:00:00/40 tag 1 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713335] ata1.00: status: { DRDY }
[ 424.713338] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713346] ata1.00: cmd 60/08:10:88:eb:bd/00:00:3b:00:00/40 tag 2 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713350] ata1.00: status: { DRDY }
[ 424.713353] ata1.00: failed command: WRITE FPDMA QUEUED
[ 424.713360] ata1.00: cmd 61/08:18:90:bf:34/00:00:49:00:00/40 tag 3 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713364] ata1.00: status: { DRDY }
[ 424.713367] ata1.00: failed command: WRITE FPDMA QUEUED
[ 424.713374] ata1.00: cmd 61/08:20:10:9a:73/00:00:25:00:00/40 tag 4 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713378] ata1.00: status: { DRDY }
[ 424.713382] ata1.00: failed command: WRITE FPDMA QUEUED
[ 424.713389] ata1.00: cmd 61/60:28:a0:8a:42/01:00:3a:00:00/40 tag 5 ncq 180224 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713393] ata1.00: status: { DRDY }
[ 424.713396] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713404] ata1.00: cmd 60/08:a0:a0:eb:bd/00:00:3b:00:00/40 tag 20 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713408] ata1.00: status: { DRDY }
[ 424.713411] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713418] ata1.00: cmd 60/08:a8:a8:eb:bd/00:00:3b:00:00/40 tag 21 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713422] ata1.00: status: { DRDY }
[ 424.713425] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713435] ata1.00: cmd 60/08:b0:b0:eb:bd/00:00:3b:00:00/40 tag 22 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713436] ata1.00: status: { DRDY }
[ 424.713437] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713439] ata1.00: cmd 60/08:b8:b8:eb:bd/00:00:3b:00:00/40 tag 23 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713441] ata1.00: status: { DRDY }
[ 424.713442] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713444] ata1.00: cmd 60/08:c0:c0:eb:bd/00:00:3b:00:00/40 tag 24 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713445] ata1.00: status: { DRDY }
[ 424.713446] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713449] ata1.00: cmd 60/08:c8:c8:eb:bd/00:00:3b:00:00/40 tag 25 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713450] ata1.00: status: { DRDY }
[ 424.713451] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713453] ata1.00: cmd 60/08:d0:d0:eb:bd/00:00:3b:00:00/40 tag 26 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713454] ata1.00: status: { DRDY }
[ 424.713455] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713458] ata1.00: cmd 60/08:d8:d8:eb:bd/00:00:3b:00:00/40 tag 27 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713459] ata1.00: status: { DRDY }
[ 424.713460] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713462] ata1.00: cmd 60/08:e0:e0:eb:bd/00:00:3b:00:00/40 tag 28 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713463] ata1.00: status: { DRDY }
[ 424.713464] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713467] ata1.00: cmd 60/08:e8:e8:eb:bd/00:00:3b:00:00/40 tag 29 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713468] ata1.00: status: { DRDY }
[ 424.713469] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713471] ata1.00: cmd 60/08:f0:f0:eb:bd/00:00:3b:00:00/40 tag 30 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713473] ata1.00: status: { DRDY }
[ 424.713475] ata1: hard resetting link
[ 425.200157] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 370)
[ 425.203897] ata1.00: configured for UDMA/133
[ 425.203906] ata1.00: device reported invalid CHS sector 0
[ 425.203910] ata1.00: device reported invalid CHS sector 0
[ 425.203913] ata1.00: device reported invalid CHS sector 0
[ 425.203916] ata1.00: device reported invalid CHS sector 0
[ 425.203919] ata1.00: device reported invalid CHS sector 0
[ 425.203923] ata1.00: device reported invalid CHS sector 0
[ 425.203926] ata1.00: device reported invalid CHS sector 0
[ 425.203929] ata1.00: device reported invalid CHS sector 0
[ 425.203932] ata1.00: device reported invalid CHS sector 0
[ 425.203934] ata1.00: device reported invalid CHS sector 0
[ 425.203937] ata1.00: device reported invalid CHS sector 0
[ 425.203940] ata1.00: device reported invalid CHS sector 0
[ 425.203943] ata1.00: device reported invalid CHS sector 0
[ 425.203945] ata1.00: device reported invalid CHS sector 0
[ 425.203948] ata1.00: device reported invalid CHS sector 0
[ 425.203951] ata1.00: device reported invalid CHS sector 0
[ 425.203953] ata1.00: device reported invalid CHS sector 0
[ 425.203977] sd 0:0:0:0: [sda]
[ 425.203980] Result: hostbyte=0x00 driverbyte=0x08
[ 425.203983] sd 0:0:0:0: [sda]
[ 425.203986] Sense Key : 0xb [current] [descriptor]
[ 425.203990] Descriptor sense data with sense descriptors (in hex):
[ 425.203993] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204004] 00 00 00 00
[ 425.204010] sd 0:0:0:0: [sda]
[ 425.204012] ASC=0x0 ASCQ=0x0
[ 425.204015] sd 0:0:0:0: [sda] CDB:
[ 425.204017] cdb[0]=0x28: 28 00 3b bd eb f8 00 00 08 00
[ 425.204028] end_request: I/O error, dev sda, sector 1002302456
[ 425.204044] sd 0:0:0:0: [sda]
[ 425.204045] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204046] sd 0:0:0:0: [sda]
[ 425.204046] Sense Key : 0xb [current] [descriptor]
[ 425.204048] Descriptor sense data with sense descriptors (in hex):
[ 425.204048] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204052] 00 00 00 00
[ 425.204054] sd 0:0:0:0: [sda]
[ 425.204054] ASC=0x0 ASCQ=0x0
[ 425.204055] sd 0:0:0:0: [sda] CDB:
[ 425.204056] cdb[0]=0x28: 28 00 3b bd eb a0 00 00 08 00
[ 425.204059] end_request: I/O error, dev sda, sector 1002302368
[ 425.204062] sd 0:0:0:0: [sda]
[ 425.204063] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204064] sd 0:0:0:0: [sda]
[ 425.204064] Sense Key : 0xb [current] [descriptor]
[ 425.204066] Descriptor sense data with sense descriptors (in hex):
[ 425.204066] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204070] 00 00 00 00
[ 425.204072] sd 0:0:0:0: [sda]
[ 425.204072] ASC=0x0 ASCQ=0x0
[ 425.204073] sd 0:0:0:0: [sda] CDB:
[ 425.204074] cdb[0]=0x28: 28 00 3b bd eb a8 00 00 08 00
[ 425.204077] end_request: I/O error, dev sda, sector 1002302376
[ 425.204079] sd 0:0:0:0: [sda]
[ 425.204080] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204081] sd 0:0:0:0: [sda]
[ 425.204082] Sense Key : 0xb [current] [descriptor]
[ 425.204083] Descriptor sense data with sense descriptors (in hex):
[ 425.204083] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204087] 00 00 00 00
[ 425.204089] sd 0:0:0:0: [sda]
[ 425.204089] ASC=0x0 ASCQ=0x0
[ 425.204090] sd 0:0:0:0: [sda] CDB:
[ 425.204091] cdb[0]=0x28: 28 00 3b bd eb b0 00 00 08 00
[ 425.204094] end_request: I/O error, dev sda, sector 1002302384
[ 425.204096] sd 0:0:0:0: [sda]
[ 425.204097] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204098] sd 0:0:0:0: [sda]
[ 425.204099] Sense Key : 0xb [current] [descriptor]
[ 425.204100] Descriptor sense data with sense descriptors (in hex):
[ 425.204100] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204104] 00 00 00 00
[ 425.204106] sd 0:0:0:0: [sda]
[ 425.204106] ASC=0x0 ASCQ=0x0
[ 425.204107] sd 0:0:0:0: [sda] CDB:
[ 425.204108] cdb[0]=0x28: 28 00 3b bd eb b8 00 00 08 00
[ 425.204111] end_request: I/O error, dev sda, sector 1002302392
[ 425.204113] sd 0:0:0:0: [sda]
[ 425.204114] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204115] sd 0:0:0:0: [sda]
[ 425.204116] Sense Key : 0xb [current] [descriptor]
[ 425.204117] Descriptor sense data with sense descriptors (in hex):
[ 425.204117] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204121] 00 00 00 00
[ 425.204123] sd 0:0:0:0: [sda]
[ 425.204123] ASC=0x0 ASCQ=0x0
[ 425.204124] sd 0:0:0:0: [sda] CDB:
[ 425.204125] cdb[0]=0x28: 28 00 3b bd eb c0 00 00 08 00
[ 425.204128] end_request: I/O error, dev sda, sector 1002302400
[ 425.204131] sd 0:0:0:0: [sda]
[ 425.204131] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204132] sd 0:0:0:0: [sda]
[ 425.204133] Sense Key : 0xb [current] [descriptor]
[ 425.204134] Descriptor sense data with sense descriptors (in hex):
[ 425.204135] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204138] 00 00 00 00
[ 425.204140] sd 0:0:0:0: [sda]
[ 425.204141] ASC=0x0 ASCQ=0x0
[ 425.204142] sd 0:0:0:0: [sda] CDB:
[ 425.204142] cdb[0]=0x28: 28 00 3b bd eb c8 00 00 08 00
[ 425.204145] end_request: I/O error, dev sda, sector 1002302408
[ 425.204148] sd 0:0:0:0: [sda]
[ 425.204148] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204149] sd 0:0:0:0: [sda]
[ 425.204150] Sense Key : 0xb [current] [descriptor]
[ 425.204151] Descriptor sense data with sense descriptors (in hex):
[ 425.204152] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204155] 00 00 00 00
[ 425.204157] sd 0:0:0:0: [sda]
[ 425.204158] ASC=0x0 ASCQ=0x0
[ 425.204159] sd 0:0:0:0: [sda] CDB:
[ 425.204159] cdb[0]=0x28: 28 00 3b bd eb d0 00 00 08 00
[ 425.204162] end_request: I/O error, dev sda, sector 1002302416
[ 425.204165] sd 0:0:0:0: [sda]
[ 425.204165] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204166] sd 0:0:0:0: [sda]
[ 425.204167] Sense Key : 0xb [current] [descriptor]
[ 425.204168] Descriptor sense data with sense descriptors (in hex):
[ 425.204169] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204172] 00 00 00 00
[ 425.204174] sd 0:0:0:0: [sda]
[ 425.204175] ASC=0x0 ASCQ=0x0
[ 425.204176] sd 0:0:0:0: [sda] CDB:
[ 425.204176] cdb[0]=0x28: 28 00 3b bd eb d8 00 00 08 00
[ 425.204179] end_request: I/O error, dev sda, sector 1002302424
[ 425.204182] sd 0:0:0:0: [sda]
[ 425.204182] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204183] sd 0:0:0:0: [sda]
[ 425.204184] Sense Key : 0xb [current] [descriptor]
[ 425.204185] Descriptor sense data with sense descriptors (in hex):
[ 425.204185] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204189] 00 00 00 00
[ 425.204191] sd 0:0:0:0: [sda]
[ 425.204192] ASC=0x0 ASCQ=0x0
[ 425.204193] sd 0:0:0:0: [sda] CDB:
[ 425.204193] cdb[0]=0x28: 28 00 3b bd eb e0 00 00 08 00
[ 425.204196] end_request: I/O error, dev sda, sector 1002302432
[ 425.204198] sd 0:0:0:0: [sda]
[ 425.204199] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204200] sd 0:0:0:0: [sda]
[ 425.204201] Sense Key : 0xb [current] [descriptor]
[ 425.204202] Descriptor sense data with sense descriptors (in hex):
[ 425.204202] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204206] 00 00 00 00
[ 425.204208] sd 0:0:0:0: [sda]
[ 425.204208] ASC=0x0 ASCQ=0x0
[ 425.204209] sd 0:0:0:0: [sda] CDB:
[ 425.204210] cdb[0]=0x28: 28 00 3b bd eb e8 00 00 08 00
[ 425.204215] sd 0:0:0:0: [sda]
[ 425.204215] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204216] sd 0:0:0:0: [sda]
[ 425.204217] Sense Key : 0xb [current] [descriptor]
[ 425.204218] Descriptor sense data with sense descriptors (in hex):
[ 425.204219] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204222] 00 00 00 00
[ 425.204224] sd 0:0:0:0: [sda]
[ 425.204225] ASC=0x0 ASCQ=0x0
[ 425.204226] sd 0:0:0:0: [sda] CDB:
[ 425.204226] cdb[0]=0x28: 28 00 3b bd eb f0 00 00 08 00
[ 425.204231] ata1: EH complete
It's strange for me to have HDD errors just with the i7 processor, with the i5 I have no problems.
I don't know if this is the part in which the cpu makes the HDD fail (if it is so):
[ 5.330570] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x4
[ 5.376652] platform microcode: Direct firmware load failed with error -2
[ 5.376654] platform microcode: Falling back to user helper
[ 5.384674] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 5.387099] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x4
[ 5.387109] platform microcode: Direct firmware load failed with error -2
[ 5.387110] platform microcode: Falling back to user helper
[ 5.388452] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x4
[ 5.388460] platform microcode: Direct firmware load failed with error -2
[ 5.388462] platform microcode: Falling back to user helper
[ 5.388853] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x4
[ 5.388863] platform microcode: Direct firmware load failed with error -2
[ 5.388865] platform microcode: Falling back to user helper
[ 5.389097] microcode: CPU4 sig=0x106e5, pf=0x2, revision=0x4
[ 5.389106] platform microcode: Direct firmware load failed with error -2
[ 5.389107] platform microcode: Falling back to user helper
[ 5.389433] microcode: CPU5 sig=0x106e5, pf=0x2, revision=0x4
[ 5.389443] platform microcode: Direct firmware load failed with error -2
[ 5.389445] platform microcode: Falling back to user helper
[ 5.389824] microcode: CPU6 sig=0x106e5, pf=0x2, revision=0x4
[ 5.389833] platform microcode: Direct firmware load failed with error -2
[ 5.389835] platform microcode: Falling back to user helper
[ 5.390239] microcode: CPU7 sig=0x106e5, pf=0x2, revision=0x4
[ 5.390244] EDAC MC: Ver: 3.0.0
[ 5.390247] platform microcode: Direct firmware load failed with error -2
[ 5.390248] platform microcode: Falling back to user helper
[ 5.390727] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 5.393902] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
[ 5.393942] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[ 5.393947] EDAC i7core: Driver loaded, 1 memory controller(s) found.
I'm going crazy, I've google a lot of things but any of them have fit good enough with my problem.
Last edited by josealb77 (2014-02-22 22:58:03)

Macbook freezes after change of wifi location

Similar Messages

Maybe you are looking for