MacBook freezing ,constant spinning wheel, Internet problems
My Macbook has been freezing and running extremely slow since Saturday, i was using logic pro and recorded alot the next day is when all the problems began,it constantly has the spinning wheel which makes completing task increasing irritating and time consuming, I've been trying to update my software to see if that would fix everything but I can't even connect to the App Store it keeps saying It doesn't have a connection but I'm more than positive I have Internet cause I'm using it on my iPhone. I'm starting to fear that all of these problems are related to each other in some strange way. I have a clean my Mac app so I'm sure I have space due to the fact I just deleted a lot of data. I tried the activity monitor also when it's idle it dosent jump or anything but when It freezes and everything resumes working I notice the activity monitor has maxed out,or so I assume, and then the spinning wheel occurs. I know my Mac is one software update behind but now since all these problems are occurring I can't access the App Store to update it. I want to just reset everything but I no longer have my disk I'm not really sure what to do I was so close to completing my project. Any advice will be greatly appreciated
Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CSeq "I/O error" | tail | open -f -a TextEdit
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the window will be empty. If you get output like this:
kernel[0] <Debug>: disk0s2: I/O error
the boot drive is failing, or there's some other hardware fault in the storage subsystem.
Similar Messages
-
Macbook air freezes with spinning wheel
So, my Macbook Air has suddenly started to freeze and leave me with the dreaded spinning wheel of death. Sometimes I get 10mins into a session, and sometimes the freezing will occur as soon as I log in. I have tried to log in in safe mode, but I also get the SWOD here as well! My details are as follows:
Problem description:
freezing with spinning wheel of death
EtreCheck version: 2.1.6 (109)
Report generated January 28, 2015 at 7:52:18 PM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Air (Technical Specifications)
MacBook Air - model: MacBookAir6,2
1 1.7 GHz Intel Core i7 CPU: 2-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Battery Health: Normal - Cycle count 239
Video Information: ℹ️
Intel HD Graphics 5000
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.9.5 (13F34) - Time since boot: 0:23:49
Disk Information: ℹ️
APPLE SSD SM0512F disk0 : (500.28 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.42 GB (358.63 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/VMware Fusion.app
[not loaded] com.vmware.kext.vmci (90.5.7) [Support]
[not loaded] com.vmware.kext.vmioplug.12.1.17 (12.1.17) [Support]
[not loaded] com.vmware.kext.vmnet (0174.73.49) [Support]
[not loaded] com.vmware.kext.vmx86 (0174.73.49) [Support]
[not loaded] com.vmware.kext.vsockets (90.5.7) [Support]
/Applications/VyprVPN.app
[loaded] foo.tap (1.0) [Support]
[loaded] foo.tun (1.0) [Support]
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) [Support]
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (2.0 - SDK 10.9) [Support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.avast.userinit.plist [Support]
[loaded] com.citrix.AuthManager_Mac.plist [Support]
[running] com.citrix.ReceiverHelper.plist [Support]
[running] com.citrix.ServiceRecords.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.avast.init.plist [Support]
[loaded] com.avast.uninstall.plist [Support]
[failed] com.avast.update.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] jp.co.canon.MasterInstaller.plist [Support]
[running] vyprvpnservice.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.avast.home.userinit.plist [Support]
[loaded] com.facebook.videochat.[redacted].plist [Support]
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
VMware Fusion Start Menu Application (/Applications/VMware Fusion.app/Contents/Library/VMware Fusion Start Menu.app)
Internet Plug-ins: ℹ️
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Support]
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.296 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
CitrixICAClientPlugIn: Version: 11.8.2 - SDK 10.7 [Support]
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
JavaAppletPlugin: Version: Java 8 Update 25 Check version
Safari Extensions: ℹ️
wrc [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
4% WindowServer
1% fontd
0% com.avast.daemon
0% AppleSpell
0% com.avast.service
Top Processes by Memory: ℹ️
404 MB com.apple.WebKit.WebContent
189 MB Safari
163 MB com.avast.daemon
137 MB com.apple.IconServicesAgent
103 MB ocspd
Virtual Memory Information: ℹ️
3.25 GB Free RAM
3.37 GB Active RAM
1.06 GB Inactive RAM
902 MB Wired RAM
1.20 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 28, 2015, 07:29:04 PM Self test - passed
Any assistance would be greatly appreciated!When I say the freezing happened suddenly, I can recount to a few occasions over the past couple of weeks where I have been watching netflix and around halfway through the program I was watching, I'd get the SPWOD and need to do a hard reboot. The major issues started this morning which I can't link to the installation or update of any programs. I have managed to update to Yosemite today - however that hasn't fixed the problem. In saying this though, the system has been stable for around the last hour, but I've only opened Safari and no other programs.
-
Mid-2010 MacBook Pro: freezing and spinning wheel
Hi there,
I have a mid-2010 MacBook Pro (I know, old) that's been in very good condition. I upgraded my OS to Mavericks in May, which is when it started being slow and crashing/freezing around twice a week. For example, just doing normal things like surfing the web or checking the Airport or battery life will suddenly freeze the cursor which will then turn into the spinning wheel of death. Sometimes I can wait it out if it's a few minutes but sometimes I have to manually turn off the computer and then turn it back on when it's been hours of no change or improvement. I know it's probably best to downgrade back to Snow Leopard but I'd really like to keep my OS. Are there other things I can do to optimize my Mac? I've tried keeping fewer files on the desktop and emptying out the trash often and it seemed to help for a while. Other suggestions?
Thanks for reading!Wow, that post looks like a mess...I will try to make it more readable.
Thanks for your reply. I had to wait a few days for the problem to crop up again. I followed your instructions to the best of my ability. The thing is that the problem (i.e. freezing and spinning wheel) happened at 8:19 and the closest messages in the Console were are time stamped 8:17 and 8:25. So I will put them here for you to look at if you don't mind:
2014-09-03 8:17:00.034 PM com.apple.usbmuxd[22]: _SendAttachNotification Device 6c:3e:6d:35:85:8d@fe80::6e3e:6dff:fe35:858d._apple-mobdev2._tcp.local. has already appeared on interface 5. Suppressing duplicate attach notification.
2014-09-03 8:25:48.000 PM kernel[0]: sav: [EWOULDBLOCK][vnode:0xffffff80243e1780][original:0xffffff80243e1780][callback: 0 count:263 ] onaccessctl_check:1827 result:0 disconnected:0
2014-09-03 8:25:48.000 PM kernel[0]: sav: current scan list:
2014-09-03 8:25:48.000 PM kernel[0]: sav: (pid 37 [mtmd], vnode 0xffffff80243e1780 [/Users/Rose/Library/Application Support/Google/Chrome/Default/Session Storage/004039.log], [context 0xffffff80236087b0] [result 0] [setup 0] [disconnected 0] [vfsbusy 0]) - 1 waiter(s)
2014-09-03 8:25:48.000 PM kernel[0]: sav: available kctl entries: 9
2014-09-03 8:25:48.000 PM kernel[0]: nspace-handler-unblock: did not find token 7629
2014-09-03 8:25:48.490 PM com.apple.mtmd[37]: handler unblock failed. (status=-1/errno=2/token=7629/fd=5)
2014-09-03 8:25:48.490 PM com.apple.mtmd[37]: attempting to thin because of low free space on Macintosh HD by removing
2014-09-03 18:30:17 -0400, estimate 0 bytes to recover, 1 snapshot can be thinned
2014-09-03 8:25:48.000 PM kernel[0]: sav: onaccess_send: NULL target or context; request:0 kctl_entry:0xffffff80234d5000
2014-09-03 8:25:48.000 PM kernel[0]: sav: onaccess_send: not SAV_KCTL_REQ_COMPLETE, return ENOMEM
2014-09-03 8:25:48.000 PM kernel[0]: sav: onaccess_send: NULL target or context; request:0 kctl_entry:0xffffff80234d5000
2014-09-03 8:25:48.000 PM kernel[0]: sav: onaccess_send: not SAV_KCTL_REQ_COMPLETE, return ENOMEM
2014-09-03 8:25:48.000 PM kernel[0]: sav: onaccess_send: NULL target or context; request:0 kctl_entry:0xffffff80234d5000
2014-09-03 8:25:48.000 PM kernel[0]: sav: onaccess_send: not SAV_KCTL_REQ_COMPLETE, return ENOMEM
2014-09-03 8:25:48.000 PM kernel[0]: sav: onaccess_send: NULL target or context; request:0 kctl_entry:0xffffff80234d5000
2014-09-03 8:25:48.000 PM kernel[0]: sav: onaccess_send: not SAV_KCTL_REQ_COMPLETE, return ENOMEM
2014-09-03 8:25:48.000 PM kernel[0]: sav: onaccess_send: NULL target or context; request:3 kctl_entry:0xffffff80234d5000
2014-09-03 8:25:48.000 PM kernel[0]: sav: onaccess_send: SAV_KCTL_REQ_COMPLETE, intercheck_done()
2014-09-03 8:25:50.584 PM com.apple.launchd.peruser.501[198]: Background: [2070] disappeared out from under us (UID: 501 EUID: 501)
2014-09-03 8:25:52.554 PM sandboxd[139]: ([2068]) assistantd(2068) deny file-read-data /Library/Preferences/com.apple.security-common.plist
2014-09-03 8:27:22.580 PM Console[2087]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
I hope this is not too much text and I hope it makes some sense. The problem happened while I was closing a tab on Chrome, which wasn't anything sketchy, just Facebook, and nothing too unmanagable (it was the only application active). Thanks for your help! -
After upgrading to Yosemite on my macbook pro,the spinning wheel doesn't go away.I have reset the SMC and the PRAM but the problem still persists.Can anyone please help
Try starting in Safe Mode
OS X: What is Safe Boot, Safe Mode?
Try booting to Recovery and repairing the startup disk
OS X: About OS X Recovery - Apple Support
Reinstall Yosemite
OS X Yosemite: Reinstall OS X
This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum. -
I installed indesign CS5 on new macbook pro and keeps freezing with spinning wheel once the app opens. Is there an issue with OS Mav or font issue or a plist I can pull. All other Adobe products work.
Migration should never be done with any Adobe program.
If you have done Migration, you have to UNINSTALL first (if even possible) and then download Adobe Creative Cloud Cleaner Tool and run that also. When this is done, restart your computer and install the programs from an original Adobe Installer.
Other question is, if your OS is supporting that version. You can try it, it is not officially supported, but it might work.
But CC will work, upgrade to CC2014 (without additional cost), use that as it is better anyway. -
Fresh install of Yosemite, nearly unusable, constant spinning wheel
Hello everyone,
MacBook Pro 13'', mid 2012
750GB HD
8GB Ram
2.9GHz dual-core Intel i7
A little background... once a year I usually back up my entire Macbook Pro, wipe it clean and install a fresh version of the most recent OS. I did this about a month ago and installed a fresh copy of Yosemite from Mountain Lion. For about 3 weeks it worked perfectly... running Adobe programs, and all my other normal applications (nothing big... Firefox, iMail, iTunes, etc).
NOW... about a week ago everything went to crap. The computer has become almost unusable without any change in habits of use. I get a CONSTANT spinning wheel whenever I click on anything its about a 30sec wait time and if I try to type something into Finder or Firefox its the death of the session... I have to restart the computer. Im at my whits end and about to use this computer as a expensive frisbee. This all started in Yosemite out of no where. There is NOTHING on my hard drive other than the operating system...
What I have already done:
Taken it into the Genius Bar. They ran some tests on the computer and physically took out the hard drive to test it on their systems. Everything checked out and received a PASS rating. They said it was nothing hardware related. They said it could have been a bad install of Yosemite since the hard drive was showing up as a "Logical Volume Group" instead of "Mac Extended Journaled". Suggested to go home and re-install Yosemite. So I did... 3 times... and nothing changed at all, same spinning wheel of death with nothing installed other than the OS.
In terminal
diskutil cs listdiskutil cs revert "UUID"
this changed nothing as well
Ran:
Verify Disk Permissions
Repair Disk Permissions - this fixed a handful of errors
Verify DiskThese 3 steps did not help much.
I am now back running Mountain Lion, it is more responsive but I still get a constant spinning wheel. Again, There is NOTHING on my hard drive other than the OS.
Here is my EtreCheck Report:
EtreCheck version: 2.1.8 (121)
Report generated March 15, 2015 6:31:00 PM PDT
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2-core
8 GB RAM
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 495
Video Information: ℹ️
Intel HD Graphics 4000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.8.5 (12F45) - Time since boot: 0:9:16
Disk Information: ℹ️
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 749.30 GB (733.32 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
QuickTime Plugin: Version: 7.7.1
JavaAppletPlugin: Version: 14.6.0 - SDK 10.8 Check version
3rd Party Preference Panes: ℹ️
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
4% kextcache
4% Safari
2% WebProcess
2% hidd
1% WindowServer
Top Processes by Memory: ℹ️
304 MB WebProcess
163 MB Safari
89 MB kextcache
69 MB mds
52 MB SystemUIServer
Virtual Memory Information: ℹ️
5.46 GB Free RAM
1.57 GB Active RAM
264 MB Inactive RAM
1.29 GB Wired RAM
261 MB Page-ins
0 B Page-outs
Diagnostics Information:ℹ️
Mar 15, 2015, 06:18:11 PM Self test - passed
Please help before I throw this thing out the window....
Thanks in advance1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1291 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1 400 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n ...and %s more line(s)\n' '\nContents of %s\n '"${k[22]}"'mod date: %s\n '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /^ +iP.+:$/{ s/://;b0'$'\n'' };/es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') exit;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o|"sed 1d"} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'G -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex|sudo:" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' '~ "kMDItemKind=Package"' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}' services '{load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0; };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 88;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B6 14 0 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B6 23 0 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
whenever i open my macbook the rainbow spinning wheel continues to spin and will not load PLEASE HELP
Which os version are you using?
Please describe in detail all you have attempted to do in order to resolve the issue.
Troubleshoot the spinning beach ball -
Massive IMAP problem, multiple iPhones - constant spinning wheel
A friend has had problems using email on his iPhone since he got it, and now after a couple of months of no problems, mine has started doing the same thing.
The problem started for him on a UK 1.1.2 firmware iPhone with an IMAP account. If you start from scratch, manually setup an IMAP account, it will connect and get your messages. However later, you will find that the iPhone email program is constantly showing the spinning wheel at the top of the screen (showing activity), not the symbol at the bottom of the screen. Worse, the battery rapidly runs down (because it is doing constant data transfers), and worse new emails do not reliably get through. This happens whether you are using GPRS, EDGE, or WiFi (does not make a difference). This problem still happens with 1.1.3 firmware. There is so much data transfer happening (or trying to happen) that the phone actually gets quite warm.
This week after a couple of months of owning my own iPhone with 1.1.3 firmware has also started doing the same thing. My main IMAP account is on a totally different server, running a different server application to my friends. However it also seems to happen with GMail accounts (using IMAP).
I am currently at home and I can see my WiFi (AirPort Extreme) base-station showing lots of activity and I know that no other WiFi devices are active so it is purely the iPhone. Turning off the email account stops the problem (and I can then see the WiFi activity stop as well) but that is hardly a solution. Also setting it to manual polling for email helps but again is not a proper solution. It is so bad that sending emails is very difficult as well.
Even though at the iPhone end nothing seems to be coming through, one can see the iPhone as a connected user at the server end (I have access to the servers, obviously not for Gmail though).
My friend has swapped his phone four times at the Apple Store and still has the problem, and as I said mine has started as well. Turning off and on does not help, resetting network settings does not help.
Apple Mail on a Mac (running both Leopard and Tiger), and other IMAP clients have no problems with the same IMAP accounts (for both of us).
Other Internet access like Web, Stock Widget, Weather Widget, even the iTunes WiFi store work fine. It is just email that is broken.Pdobry wrote:
The problem is that Mail app in iPhone is trying to download message headers via FETCH command and does not handle properly response from IMAP server which does not support partial download of email headers. It starts asking for the headers in the infinite loop which quickly drains out the battery
More recent testing by myself reveals it is getting stuck on some messages when doing the 'message peek' to get the summary of an email. It gets the subjects fine (as the first pass) but then gets stuck on some emails when doing the second pass to get the summary. Apple Mail on a Mac does not (as far as I am aware) do a message peek so does not have this problem.
The two different makes of server I have seen this problem with do support this message peek command in that at least some of the time it is working with the iPhone.
I was able to get a debug level log which shows entries like this
\[02/Apr/2008 23:56:17\]\[48699904\] {imaps} Peek FETCH executed on message 0000ba58 in folder [email protected]/INBOX
\[02/Apr/2008 23:56:17\]\[48699904\] {imaps} Sent 1 fetch responses
\[02/Apr/2008 23:56:18\]\[48699904\] {imaps} Command 293 UID FETCH 47704 BODY.PEEK\[2.HEADER\]<1177.15207>
\[02/Apr/2008 23:56:18\]\[48699904\] {imaps} Peek FETCH executed on message 0000ba58 in folder [email protected]/INBOX
\[02/Apr/2008 23:56:18\]\[48699904\] {imaps} Sent 1 fetch responses
\[02/Apr/2008 23:56:18\]\[48699904\] {imaps} Command 294 UID FETCH 47704 BODY.PEEK\[2.HEADER\]<1177.15207>
The above shows two repetitions but it keeps on (and on, and on). Other occasions show this does work for other messages. If I deliberately arrange to get the iPhone to connect to get the latest messages I can see it get stuck on a particular message, and then even if I turn it off and back on and reconnect it will get stuck on the same message. If repeated on a later date then the contents of the inbox will have changed and the message it gets stuck on will be different.
As it seems to be linked to specific messages it was not a surprise that when this is tried on a practically empty email account the problem does not occur.
This has happened with multiple different makes of mail server (well at least two), multiple email accounts, multiple users, and multiple different iPhones (one person had his swapped four times). It does not happen with 'ordinary' IMAP client software, only with the iPhone.
Even if one for arguments sake assumes the mail server is at fault and is sending the iPhone garbage, the iPhone should only try a single specific email a maximum number of times (for example five), and then give up. This would prevent it draining the battery so fast and trying to cook itself (by constantly running its transmitter). -
Macbook Pro 13-inch Late 2011 with constant Spinning Wheel of Death (SWOD)
Hi Guys!
I really have a problem with the Spinning Wheel of Death and slow performance all the time. It suddently started after upgrading to OS X Mavericks.
These are the things i've tried so far:
- Boot up in Safe Mode and Internet Recovery Mode to repair disc permissions and disc = No Errors found at all
- Used SMARTreporter but everything returned as OK
- Installed 16GB of ram installed
- Looked in Activity Monitor, but everything appears to be okay with both RAM, CPU and HD
- Boot with Apple Hardware Test = Everything OK
- Booted up in Internet Recovery and erased the entire HD, clean installed OS X Lion (the OS i bought the Macbook Pro with)
First i thought it was a problem with my HD or my RAM. But everything is returning the OK result. I really hope some of you out there can help me, cause right now its realy hard to use it at the University. It looks like its a software problem, but i can't figure it out.
Made a test in EtreCheck and these are the results from it:
Hardware Information:
MacBook Pro (13-inch, Late 2011)
MacBook Pro - model: MacBookPro8,1
1 2.8 GHz Intel Core i7 CPU: 2 cores
16 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 512 MB
System Software:
Mac OS X 10.7.5 (11G63) - Uptime: 0 days 0:44:46
Disk Information:
TOSHIBA MK7559GSXF disk0 : (750,16 GB)
disk0s1 (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 749,3 GB (712,02 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5970H
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple, Inc. MacBook Pro
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
Launch Agents:
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[not loaded] com.spotify.webhelper.plist 3rd-Party support link
[not loaded] com.valvesoftware.steamclean.plist 3rd-Party support link
User Login Items:
iTunesHelper
Dropbox
SMARTReporter
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.1
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 3rd-Party support link
Flash Player: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 3rd-Party support link
SharePointBrowserPlugin: Version: 14.1.0 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Audio Plug-ins:
iSightAudio: Version: 7.7.1 - SDK 10.7
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.3 - SDK 10.7
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Java 3rd-Party support link
Old Applications:
None
Time Machine:
Time Machine not configured!
Top Processes by CPU:
3% WindowServer
1% EtreCheck
1% activitymonitord
1% Microsoft Word
1% Activity Monitor
Top Processes by Memory:
115 MB WebProcess
82 MB Microsoft Word
66 MB Safari
49 MB WindowServer
49 MB Finder
Virtual Memory Information:
13.50 GB Free RAM
873 MB Active RAM
234 MB Inactive RAM
1.42 GB Wired RAM
336 MB Page-ins
0 B Page-outsPlease read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. It will be slow, but there should be no beachballing. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
After the update of my 13 in mac book pro (early to mid 2011) , it freezes every 30 seconds with the spinning wheel and now it just freezes. Ive never had this problem until I recently updated. Also, I just checked now for available update ( which there was one), the update would process till the last step and it shows it cannot be expanded? Now my computer wont even restart (just have a grey screen with a cursor). Can someone please tell me what the heck is going on with my computer?
I also checked the memory and it showed available memory was over 1.5 GB. I dont have any programms installed and do not have backup yet ( dont really need it anyways)
Problems: first with spinning wheel every 30 seconds and now whole computer just freezes when I restart, it only shows grey screen after the starting sound or it takes about 8 to 10 minutes to restart.
This ALL happened right after the update with google chrome crashing. I know my apple care plan expired so I cant even go to genius bar. Do you guys know how much it would cost to get it fixed ? Or any recommendations I can do to fix this?Try a smc reset:
http://support.apple.com/kb/HT3964 -
My Macbook 3.1 with OSX 10.5.8 has a constant spinning wheel from startup on.
I am a novice at all of this, so please don't shout at me. This all started after a message about no more room available on my startup disc, and there appears that there is nothing in the statrup folder. I don't know how to correct that. I attempted to access the Systems Preferences to reset the sleep options, without success. I even utilized the OSX installation disc to run the Apple Hardware Test (Extended Testing). The Error Message that resulted is Error Code 4HDD/11/40000004:SATA(0,0). I've already tested and repaired the Permissions as well. I'm open to any suggestions on how to correct all of this. The spinning beachball appears everytime I try to access anything on my screen.
The memory is 232.4GB capacity, 170.0 GB Available, 57.4 GB used.
My protection coverage expired recently, any ideas on how much this may cost to fix at the Genius Bar?I took my MacBook to the Genius Bar and they determined that the hard drive was failing. Replacement done, reloaded software & I'm back in business, w/o that spinning wheel. This was my fourth replacement. No cost to me as it was done as a repeat repair. Just thought I'd update my original post.
-
Adobe Creative Cloud / Desktop App / Home Screen: Constant Spinning Wheel
Adobe Creative Cloud:
Home Screen / Constant blue spinning wheel
Mcc OSX LION
I had the same problem: ........ went on for weeks...
Fixed by logging out of all my Adobe Creative Cloud Assets....
Restarting machine and resigining in.....
everyyyyy where......
Seems kool now.....
Cheers,
KaiThere were a few posts earlier today about the same spinning wheel issue and this was the solution for them:
App doesn't open | Progress wheel spins continually
http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
Other related threads:
http://forums.adobe.com/message/5468864 (spinning blue wheel)
http://forums.adobe.com/message/5469306 -
Computer freezing with spinning wheel -- Heroku??
Hi,
I'm having a couple of issues with my Mac desktop.
After it sits idle for more than an hour, it freezes. At first the mouse doesn't respond. Then, if I can get it moving, I get the spinning wheel that won't go away. I have to end up turning it off, then back on for it to work. I've had the computer for over 3 years and this just started happening about 2 weeks ago.
Yesterday I got an error message when using Safari -- "Heroku -- No app found". I have no idea what this means. Has something hijacked my computer? Strangely, I've been getting the same error message on my iPad lately! Could it have something to do with iCloud sharing information on both?? Sorry for the broad questions, but I'm pretty clueless when it comes to Mac's.
Any help would be greatly appreciated!!This forum category is for Older iPods, so I'm not sure how your post ended up here. You may want to post another question, by going here first
https://discussions.apple.com/index.jspa
and selecting the appropriate forun category, such as your Mac model or Mac OS X version.
I would do two tests. Start up the Mac in Safe Mode
http://support.apple.com/kb/ht1564
Although some things will not work in Safe Mode, you can use Safari. Does this problem happen in Safe Mode? If it does not, there may be some system extension or background process running when you start up nornally, that is causing this problem.
To further narrow down the cause, start up normally and create a new user account in System Preferences Users & Groups pane. The new user account can be Admin or Standard. Log out and log in to the new user account (do not use Fast User Switching). In the new user account, does this problem occur? If it does, the cause is likely to be at the system level. If does not, the cause is likely to be something that runs in the background, when you log in to your usual user account.
Doing these test will allow additional troubleshooting to be more focused. -
Again,
My macbook pro just frooze while on-line. I got the rainbow wheel spinnin and it wouldn't stop I tried to do a force quit and I was unable to do that. So I held down the power button. Now when I try to restart it I can't get by the while page with the apple symbol on it. All I have is the grey circle spinning continuosly like it is working. I tried a command S when I started it back up and checked the HD and rebooted, still can't get by the startup page. Any suggestions?I'm having the same problem. I started an automatic upgrade that then got "stuck" for hours. I did a hard shut down and now all I get when I try to reboot is the spinning wheel. I haven't done a backup in 3 months and can't afford to lose everything in a reinstall. Any suggestions?
-
Game froze my MacBook Pro, now I have internet problems-What should I do?
Hi,
I recently bought a game to play on my macbook pro, it is Sims Castaway Stories for Mac by Aspyr.
My laptop meets/exceeds the requirements to play it. It only uses little ram and hardrive space.
I installed it a few days ago, my laptop started to get really worked up 30-60 mins into playing the game. My laptop was making A LOT of noise and got pretty hot, I could hear that it was making a lot of effort to ventilate the heat out and to keep my laptop cool.
About 5 hours into playing the game My laptop completely froze and I had to force shut it down and restart.
Everything seemed fine when I restarted it. I played the game the next few days and it ran fine for over 5 hours. However my laptop is still very hot and noisy every time I play the game, and even when I don't have the game open, but just the disc in.
When I have the game running and go on the internet the videos I watch are distorted, images are fragmented + oddly colored, pages load in computer code, and pages won't load occasionally.
I have the same problems with my internet when the game disc is not in my laptop. (disc out= no super hot and hyperventilating laptop problems)
I have even uninstalled the game completely and the internet problems are still there.
I use google chrome, but I have the same problems on safari.
My home windows pc has the same internet problems as well, my second windows pc does not.
Is this a bad internet connection problem or has this game damaged my laptop?
What should I do?The Internet is sent to you in packets with an error-detection code on them. Ones that come through with errors are rejected. Distortions and problems with display are caused by problems on your computer itself, not by bad data from the Internet.
Most games, including ones tied to the Internet, work your computer very hard. It will get hot. When it starts to get hot, the fans will go on high. Putting the DVD in the drive makes a motor spin it up and that causes heat as well.
Do you have enough RAM memory to support all the things you are doing at once? If not, your Hard drive will be on all the time to do Paging to simulate more RAM memory, and spinning its motor all the time will make your Mac really Hot.
To cool the underside by convection, at least 3/4 inch (20mm) space is needed underneath. A smaller space is not effective.
Maybe you are looking for
-
I had 2 sucessive kernal panic after down loading the 10.6.8 update Combo V1.1
Can some one tell me if mine has updated the above. I reinstalled my Snow Leopard on my Mac Book Air 2.1 [128 GB SSD, 2GB RAM, 2.13GHz Intel] using Disk 1 that came with my computer. I did not look at the Snow Leopard Version after this step. Then ch
-
Slow start up / "ghost programs"
I had some trouble with my harddisk when it filled up and became slow, so I made a clean install and copied back my things from Time Machine. But, and this problem happened before that too, my iMac takes forever to startup (about 5 minutes). And ever
-
PI Configuration and connection settings between SAP ERP and peoplesoft
Can someone please share some docs or the link for the PI Configuration and connection settings for the connection between SAP ERP and people soft system. Thanks in advnce Regards krish
-
what is float path and why we r using that
-
Help, could not read properties after setting the RMISecurityManager.
Hi, I am new in RMi and I could not read a properties file when run a class in jar file with java -jar option. I start the the class by as follows. java -jar darwin_enhanced.jar -Djava.rmi.server.codebase=file:///home/wing/Darwin/Project/release.serv