Macbook hard drive fail....I think?

I have a Macbook that when booted just displayed a folder icon. Thru searching I believed the hard drive failed.
80gb drive fails "verify disk" so I ran "repair disk". It says it repairs but always fails again on verify.
So I purchased a new hard drive (500 gb) Installed it and when I tried to partion it it appears as a 3.6 TB drive??????  So I returned the drive and got another only to have the same issue?
Is it the drive? Some other part? Please help?
Thanks!

What is it you need - Windows installer disc or something else?  Your question is unclear.  Could you be more specific?

Similar Messages

  • TS1389 I have a Windows 7 computer.  When my MacBook hard drive failed, I purchased a PC.  I have 100 iTunes songs that were purchased that will not play on my new computer.  I completed each of the recommended steps in this article and the songs don't pl

    Apparently, this issue is a common one.  I have also tried importing songs from an iTunes on an old pc I no longer use.  I am still prompted to authorize my computer when I attempt to play 100 different songs.  After entering my password, I receive the message that the computer is already authorized.  How can I resolve this issue?  I previously contacted Apple and they were unable to assist me in resolving the issue.

    Apparently, this issue is a common one.  I have also tried importing songs from an iTunes on an old pc I no longer use.  I am still prompted to authorize my computer when I attempt to play 100 different songs.  After entering my password, I receive the message that the computer is already authorized.  How can I resolve this issue?  I previously contacted Apple and they were unable to assist me in resolving the issue.

  • Macbook Pro Hard Drives Failing

    Hi all,
    I've been having massing problems with my Macbook Pro 15" 2.53 Ghz laptop. I got one brand new with apple care in December of 2008. The hard drive was the standard 320 Gb @ 5400 RPM.
    Within approximately two weeks of operation the computer failed (froze and after a hard shutdown wouldn't boot). It turned out the hard drive failed. Two weeks! So I took it back to Apple and they replaced the hard drive (took them one week so I lost a week of productivity).
    One week after receiving the laptop back, the hard drive failed again! This time I believe the OS got corrupted somehow as the symptom was that it would not boot.
    So back to Apple and they straight out replaced it with a new one. One week later, guess what? Failure. So back again and they replaced it.
    I'm now on my 3rd laptop from Apple and this hard drive is failing. Luckily I was able to back everything up. I downloaded a utility called SMART Utility and it tells me 60 some sectors are bad on this disk.
    Is anyone else having issues like this? Its absolutely ridiculous. Currently the computer is working despite the failed sectors and horrible sounds coming from the hard drive but I expect failure soon. I'll be taking this back to Apple and showing them the results of the SMART Utility, but I'm at the end of the rope here.
    I've owned multiple Macbook Pros before and absolutely loved them. But now I am so disillusioned by this... To Apple's credit they have had great customer service, but now I'm at the point where I need to be able to rely on my machine.
    Has anyone heard anything?

    I would second Michael's comment. While hard drives do fail, the rate at which yours are failing would appear to be well beyond the statistical average. I would generally think the next level would be a problem with the MacBook itself causing the failures, but from what I can tell from your comment is that they have replaced your MacBook twice (and you're on your third?). So that would seem to rule out a problem with the MacBook itself. You mentioned that you've had other MacBooks before and it doesn't sound like you've had problems with them... so I wouldn't expect that you're doing anything unusual that would cause the problem.
    You're either had a remarkable run of bad luck, or there's something going on that's out of the ordinary causing these drives to fail. I would imagine that when stores get machines, they're likely shipped from batches that are manufactured at similar times. If they had a batch of faulty drives from the manufacturer, it's possible a single store could have gotten several of them. That would still not really explain why your initially replaced drive failed as it would likely have come from a totally different batch than what would have been used in manufacturing at the time your notebook was put together. I guess it's always possible that they might put in a drive that that wasn't new.

  • Macbook Pro 13" Late 2011 hard drive fails, how to replace hard drive?

    Hi!
    I have a Macbook Pro 13" Late 2011 (OS X Mountain Lion v 1.3.18 (352.4). I tried to install OS X Mavericks but it showed this error message:
    "This disk has S.M.A.R.T. errors. This disk has a hardware problem that can't be repaired. Back up as soon much data as possible and replace the disk."
    The laptop was still doing fine so I didn't do anything. Then it started to act funny: iPhoto stopped working, hangs when I watch video streaming, and it started to run really slow. I only use the laptop's basic features- internet, watching movies, editing using iMovies so it's really strange for me that the hard drive failed all of a sudden.
    I called Apple support and a kind fellow tried to troubleshoot it, thinking it was only a software problem. In the end, he said I need to bring my macbook to the service center and have the hard drive replaced. I know it will cost a lot so I want to replace the it myself.
    Here are my questions:
    1) Can this problem really be solved by just replacing the hard drive?
    2) Can I use SSD this time so my Macbook can run faster?
    3) What SSD is recommended for my late 2011 Macbook 13"?
    4) I don't have the installation disk, can I still install the OS X Mountain Lion? How?
    I am looking for other sites as well but I hope this community could share some tips too.
    Thanks a lot!

    I've switched out the hard drive on my Late 2011 model several times and I've never disconnected the battery cable.
    In my "Opinion" it is not necessary to do that. Not sure if it is or not recommended by Apple.
    EDIT:
    I just looked at my User Manual, PDF I downloaded from Apple, and there is no mention of disconnecting the battery.
    Here's a link to the manual for my model.
    http://manuals.info.apple.com/MANUALS/1000/MA1602/en_US/macbook_pro_15inch_late_ 2011.pdf

  • Hard drive failed on original Macbook. No OSX discs came with it. Now what?

    I had my hard drive fail on my original Macbook and I didn't get any OSX discs when it came from Apple all those years ago. So do I try and find Tiger, the original OS, or look to upgrade to Leopard? I can't find any answers on what really to do here and I need to get it up and running because it's the first week of school and I don't have a computer (thank goodness for my iphone).
    I've looked on Amazon for OSX and found some Leopard. I have 2.0Ghz with 2GB RAM in my Macbook now and will be getting a new hard drive Friday. The Leopards on there run for about $275 new. I was hoping it wouldn't be that much, but I might now have any other options.

    bentaulbee wrote:
    I can do a clean install on a new hard drive with the Snow Leopard Upgrade version?
    I did a bit of research and found out that you can not without a previous install of Leopard. I did, however, find that the Mac Box Set has a full install DVD AND contains iLife and iWork. It can be found [here|http://store.apple.com/us/product/MC209Z/A].

  • Hard drive failing on Macbook 13" OS 10.7.3 Need to xfer all files to an iMAC 21.5. How to do this?

    Hard drive failing on Macbook 13" OS 10.7.3 Need to xfer all files to an iMAC 21.5. How to do this?

    Can you boot the MacBook into FireWire Target Disk mode? That turns it (temporarily) into an expensive hard drive. You can then move files.
    Another way would be to use an external hard drive, attach it to the MacBook and user software such as Bombich's Carbon Copy Cloner to copy the hard drive (assuming you have sufficient space on the iMac.)
    Best of luck. Please keep your data backed up in the future to avoid this. It'll make your life easier.

  • My hard drive failed. My applications were on the drive including Excel, Word, and Powerpoint. Apple told me I could pull everything from the failed drive. I tried that but the drive is bad so I can't get to anything. Do you think Apple will reinstall?

    My hard drive failed. My applications were on the drive including Excel, Word, and Powerpoint. Apple told me I could pull everything from the failed drive. I tried that but the drive is bad so I can't get to anything. The Office package was installed/included when I purchased the Mac. Does anyone think Apple will provide me with the Office package? Thank you!

    Thank you everyone. I apologize to confusing all but I am up to date and running OS X 10.8.2.  It's possible I purchased the key for Office but I don't think so although it was 3-4 years ago. I guess I will stop in the Apple Store and just ask. I may just buy the new bundle anyway to get the most updated.
    I have read there are issues with the MS Office bundle running on our latest OS, is that true?
    Thank you all!!! You've been great!

  • What All Do I Need If I Want To Upgrade My Macbook Hard Drive?

    hey guys.
    i've tried reading up a little but i was hoping someone (or a few people) could give me some straight up answers.
    if i want to upgrade my macbook hard drive what all do i need? just the hard drive? or are there other pieces?
    also.. whats a good 250GB one? i found this one on ebay: http://cgi.ebay.com/NEW-2-5-Western-Digital-250GB-SATA-Harddrive_W0QQitemZ220271 134397QQihZ012QQcategoryZ158853QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
    is that one any good? i just know the name (Western Digital) and have heard good things about them...
    any comments are welcome.
    thanks!
    beau

    I got a 320GB sata 2.5" hard drive and installed it myself, its easy. I also got a caddy so I can use my old 120GB drive as a back up. Make sure u have everything backed up! Seagate and western digital drives are most popular. I asked similar q and got this answer"
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
    If your backup is bootable, then boot from the external drive and use SuperDuper to clone it back to the newly installed drive.
    Mac Pro 2.66 Ghz; MacBook Pro C2D 2.33 Ghz; MacBook Pro 2.16 Ghz Mac OS X (10.5.4) Intel iMac C2D 17 "; MacBook 2.0 Ghz.
    And
    Now, to install the hard drive, follow http://www.ifixit.com/Guide/Mac/MacBook-Core-Duo/Hard-Drive-Replacement/86/5/

  • My hard drive failed and I can't afford the professional data recovery.  Do I have any other options?

    I have a 13" Early 2011 Macbook Pro.  Last week the hard drive failed (for the second time), and when I took it to the Apple Store I was told it would cost $177 to replace the hard drive and the cables.  I intend on going through with this and getting it fixed, however the man I talked to said I should hold on to it a little longer before giving it to them for repair in case I want to recover my data.  When I researched how to recover the data, my answers mostly consisted of taking it to a professional to do so.  I found a local authorized service provider who said they could do so, however I was told it would cost at least $400 to recover my data (possibly more depending on how much data there is to recover).
    I can afford to pay $177 to fix the hard drive.  I cannot, however, afford to pay an additional $400+ to get all of my data back.  Yes I realize I should have backed my files up onto an external hard drive (I'm not the most computer-savvy person), but honestly, all I really need is my photos.  When my hard drive was in the process of failing, I got a flash drive and put a lot of my files onto it so I would at least have some of them when I got my Macbook fixed.  At this point, I can't even turn it on, so I am not able to go into iPhoto and get my pictures.
    Is there any way I can do this myself?  There is no way I can get this done professionally.  I would love to be able to all of my data and files back, but if I can just get some that is better than nothing.  Any help would be appreciated!

    obesity wrote:
    It was really empty. Clicked on, nothing.
    But no prohibited signs, like these:
    Get info on folder, zero kb. Just one user account on each mac.
    I did navigate back several days prior to my Mac dying. Still nothing.
    Sounds like it may have been excluded, or perhaps damaged. 
    Just for future reference, it's always a good idea to keep "secondary" backups.  See #27 in Time Machine - Frequently Asked Questions for some suggestions.

  • Hard Drive Failed, New one Installed, Problems of course

    Hellooo Everyone This is sort of a last ditch effort to see if I can fix this myself or if I am going to have to shell out 500 dollars to get my laptop back in working order. So I have a HP dv6-6140 laptop. A few weeks ago the hard drive failed and I purchased and installed a new one, ran windows 7 and have it on my laptop. When I try to hook up an ethernet cable to download and install the drivers for the laptop the ethernet cable is not recognized it says no internet connection blah blah blah. Ok so I downloaded the drivers to a flash drive and installed some of them onto my laptop, no changes.  So I was thinking of purchasing the recovery discs which im assuming include the drivers for the notebook for 35 dollars which is paltry in comparison to what I would pay if I took it to a computer repair shop, but how do I know that would work? I dont. I am looking for ideas or anything that I may be missing. I am not computer illiterate but I am not an expert. Any advice would be greatly appreciated Thanks!
    Kelly

    Hi, Kelly:
    On your model normally it is very important to install the chipset driver first and reboot before attempting to install the ethernet (wired network) driver.
    The chipset drivers install some motherboard driver which I think enables the communication to the ethernet adapter.
    The problem is, HP does not include the necessary chipset drivers for your model (which I assume is a HP Pavilion dv6-6140us Entertainment Notebook PC).
    So...Download and install the AMD Chipset Drivers and reboot.  You want the first driver listed on the webpage.
    http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
    Then see if the ethernet adapter works again or reinstall the ethernet driver after you reboot the PC.
    The parts list indicates your model comes with a Broadcom wireless/bluetooth card.
    Here are the links to the drivers you need for that...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&dlc=en&lc=en
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131427-1&cc=us&dlc=en&lc=en...

  • Hard drive failed. All content lost?

    Hello,
    I have a MacBook Pro that I purchased fall of 2012. Recently the hard drive failed and I was not smart enough to back the computer up before it failed. I am mostly concerned about the music that may be lost once I sync my phone to another computer. I have over 30 gigs of music - a lot of which includes old CD's that I no longer have. So, is all of my music (that I did not purchase from iTunes) really lost or is there something I can do? I have my entire music library on my phone and iPod classic.
    Any help is appreciated...

    Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself independently backed up against loss.  To use a device with a new computer you transfer the content from the old computer (or its backup) directly to the new computer, not the device to the new computer. Media syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
    For transferring other items from an i-device to a computer you will have to use third party commercial software.  See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
    By the way, if you no longer have the CDs then you also relinquish your right to have any copies of the music from those CDs.

  • Hard Drive failed both postive read and smart short self test

    Hello, my Lenovo Think Pad's Hard Drive failed both targeted read  test (error code WHD20-HJF) and the smart self test (error code WHD16-KPY). I admit that I'm an older user and I have no idea what this means and what is the possible fix for it.
    I am open to all suggestions;
    THANKS,
    Octavious ONeal

    Hi, Octavious
    When the hard drive fails those tests, it's an indication that the drive is dying. It's recommended to back up any valuble data on the hard drive and then replace it soon. The drive may still work for a little while, but it will likely stop working sometime soon.
    Hope it helps,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • Hard drive failed, now I need to re-purchase iTune's library

    My father's hard drive failed and now his iTune's library is gone. I have two questions.
    1. How can I buy a list of songs from the iTune's music store? I want to avoid re-purchasing individual songs and albums; it will take forever.
    2. Is there a valid way to recover the songs that are on his iPod nano? This is only a partrial solution if it can get done.
    Thank you in advance for any insight.

    If he still has the library on his Nano, hope is not lost. There are programs that will allow you to copy from the iPod. I've heard of Yamipod and iPodRip. You could Google those and give it a try. Not sure if they work on Nano, but I would think so.
    Diane Wordsmith

  • I'm an avid Mac enthusiast who works in a creative field. However, I simply cannot afford a new Mac after my old one's internal hard drive failed. Can anyone recommend an affordable Mac option? I don't want to consider a non-Apple product.

    I'm an avid Mac enthusiast who works in a creative field. However, I simply cannot afford a new Mac after my old one's internal hard drive failed. Can anyone recommend an affordable Mac option? I don't want to consider a non-Apple product.

    Macs with a FireWire port will also boot happily from an External drive. You don't even need to open the MacBook.
    Some users buy a drive they would like to have as a future Internal drive, and also buy an external enclosure. They get the External set up the way they want it, then swap with the Internal drive.

  • IMovie -Problem restoring events after external hard drive failed.

    iMovie 09 – The external hard drive failed where I stored my 2012 events.  I do not have a backup copy of these events. I bought a new external drive and named it exactly the same as the old drive. Then I uploaded archived original video clips to it recreating the events.  I used the exact same event names.  However when I view the projects I made from the original events, I get “this clip’s media file is not currently available”. The file path I created should be the same as the old, so why does the project not recognize the recreated events?  Any suggestions what I could try?
    If I were able to retrieve and copy the old events from the failed drive to the new drive, would that work?
    Has anyone successfully dealt with this problem?

    That's a very interesting scenario that you've described. I've been concerned about a potential situation arising where I may need to restore Events from a backup drive. However, your situation is somewhat different in that you've had to re-import the Events to a new drive from an archive.
    My main video drive is a Maxtor One Touch III Turbo comprising two 500GB drives set up as a RAID 0. So, effectively it appears as one drive totalling 1TB, with data being written to both drives simultaneously (but not mirrored). However, if one drive fails, the other becomes ineffective as it contains only partial data about imported clips (the remaining data being on the failed drive).
    I backup the Maxtor to a portable 1TB drive by cloning it using SuperDuper. My thinking has been that, if the Maxtor fails then a simple rename of the backup drive to the same name as the Maxtor is all that will be required for iMovie to retain the linkages between Events and Projects. I hope this is the case!
    I hope you get a solution to your predicament - sorry I can't offer any useful advice!
    John

Maybe you are looking for

  • Consuming more swap space after upgrade from 10.2.0.1 to 10,2.0.4 on Solari

    Hi, After upgrading 10.2.0.1 to 10.2.0.4. Out of four database in one database is consuming more swap space. and in another database while executing catupgrd.sql, it is coming out with error ORa-04030 out of process memory error. thanks in adavance A

  • Retriving com class error in add-on client machine

    Dear all, i got error com class error when i start the add-on. The add-on working good all  systems except two client system. Thanks & Regards B.Lakshmi narayanan

  • Java ME 3.0 Web Services Stub Generator  Inheritance problem

    Hello, I have a problem with that relates to inheritance. Suppose I have abstract class User and class Member that extends class User. Suppose I have web service MyService: @WebService public class MyService { public User getUser(int id) { // do some

  • GetUploadedFile() return nullexception

    Just trying to upload a file and I get NullPointer exception. Im missing something really stupid. Any help? Added a fileUpload component and in the chooseLocalButton_action I get the Null exception. Thanks! public String chooseLocalButton_action() {

  • Which router will I get?

    I am scheduled for a Sept. 6th install in Marblehead MA (North of Boston). Does anyone know which router I am likely to get for my freebie?  I want 802.11N with gigabit wired ports.  Any chance of that, or should I just buy my own and convert theirs