MacBook/Intel 945GM + xrandr - TV

Hi,
I'm not able to send output to my TV. Any help would be greatly appreciated...
I'm on a MacBook 2,1 and using a mini-DVI adapter which outputs to S-Video
lspci:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
xrandr (no options)
Screen 0: minimum 320 x 200, current 1280 x 800, maximum 4096 x 4096
VGA1 connected (normal left inverted right x axis y axis)
1024x768 60.0
800x600 60.3 56.2
848x480 60.0
640x480 59.9
LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 286mm x 178mm
1280x800 59.9*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
DVI1 disconnected (normal left inverted right x axis y axis)
TV1 disconnected (normal left inverted right x axis y axis)
I've tried:
xrandr --output LVDS1 --mode 1280x800 --output VGA1 --mode 800x600 --right-of LVDS1
xrandr --output LVDS1 --mode 1280x800 --output VGA1 --mode 1024x800 --right-of LVDS1
and get a screen flicker but just see black with slightly diagonal white lines/dots scrolling down the screen.
The searching I've done pulls up a lot of people trying to output to monitors but not TVs. I'm unfamiliar with if there is anything special about doing this. The OS X side works fine with this setup and it'd be great to not have to reboot whenever I wanted to watch something. Some searches have mentioned setting custom modes and trying to set TV_STANDARD to PAL or NTSC. I've tried this and get:
$ xrandr --output VGA1 --set TV_STANDARD PAL
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 150 (RANDR)
Minor opcode of failed request: 11 (RRQueryOutputProperty)
Serial number of failed request: 31
Current serial number in output stream: 31
Any suggestions would be greatly appreciated.

Similar Messages

[SOLVED] Macbook 2,1 Intel 945GM: no backlight property custom kernel

Hi,
I just finished compiling a custom kernel for my Macbook and for the life of me cannot figure out which option enables backlight control. I'm suspecting it might be CONFIG_FB_BACKLIGHT, but I can't actually find it via 'make menuconfig.' In other words, I can grep it from the raw config, but don't know where it is:
$ grep -A10 -B10 CONFIG_FB_BACKLIGHT .config
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
[b]# CONFIG_FB_BACKLIGHT is not set[/b]
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# Frame buffer hardware drivers
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
But menuconfig is like this:
--- Support for frame buffer
[ ] Enable firmware EDID
[ ] foreign endianness support --->
[ ] Video Mode Handling Helpers
[ ] Tile Blitting Support
It's hard to reproduce entirely here, but the point is that the config grep returns fb_backlight just above mode helpers/tilebitting, but above those are foreign endianness, and that's not where the backlight setting is.
The card is the Intel 945GM; on the default Arch kernel I can use xbacklight to adjust brightness. With my custom compiled one, I get "no outputs have backlight property" with xbacklight and, indeed, /sys/class/backlight is empty.
Would someone kindly tell me which kernel option provides the backlight property for this card?
Last edited by jwhendy (2011-10-15 16:44:30)

@byte:
Thanks for the suggestion, $ diff --side-by-side CONFIG_FB_BACKLIGHT=y CONFIG_FB_NVIDIA_BACKLIGHT=y CONFIG_FB_RIVA_BACKLIGHT=y CONFIG_FB_RADEON_BACKLIGHT=y CONFIG_FB_ATY128_BACKLIGHT=y CONFIG_FB_ATY_BACKLIGHT=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=m CONFIG_BACKLIGHT_PROGEAR=m CONFIG_BACKLIGHT_CARILLO_RANCH=m CONFIG_BACKLIGHT_MBP_NVIDIA=m CONFIG_BACKLIGHT_SAHARA=m CONFIG_BACKLIGHT_WM831X=m CONFIG_BACKLIGHT_ADP8860=m CONFIG_BACKLIGHT_PCF50633=m CONFIG_HID_PICOLCD_BACKLIGHT=y CONFIG_LEDS_TRIGGER_HEARTBEAT=m CONFIG_LEDS_TRIGGER_BACKLIGHT=m CONFIG_DRM_NOUVEAU_BACKLIGHT=y I don't see much ]$ diff --side-by-side # Power management and ACPI options CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y CONFIG_ACPI_PROCFS_POWER=y CONFIG_ACPI_POWER_METER=m CONFIG_ACPI_EC_DEBUGFS=m CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=m CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=m CONFIG_ACPI_DOCK=y CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_IPMI=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_PROCESSOR_AGGREGATOR=m CONFIG_ACPI_THERMAL=m # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_PCI_SLOT=m CONFIG_ACPI_CONTAINER=m CONFIG_ACPI_SBS=m CONFIG_ACPI_HED=m CONFIG_ACPI_APEI=y CONFIG_ACPI_APEI_GHES=m CONFIG_ACPI_APEI_EINJ=m CONFIG_ACPI_APEI_ERST_DEBUG=m CONFIG_X86_ACPI_CPUFREQ=m CONFIG_X86_POWERNOW_K7_ACPI=y CONFIG_CARDBUS=y CONFIG_HOTPLUG_PCI_ACPI=m CONFIG_HOTPLUG_PCI_ACPI_IBM=m CONFIG_PNPACPI=y CONFIG_BLK_DEV_IDEACPI=y CONFIG_ATA_ACPI=y CONFIG_PATA_ACPI=m # ACPI drivers # ACPI drivers CONFIG_ACPI_QUICKSTART=m CONFIG_TC1100_WMI=m CONFIG_COMPAL_LAPTOP=m CONFIG_SONY_LAPTOP=m CONFIG_IDEAPAD_LAPTOP=m CONFIG_THINKPAD_ACPI=m CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y # CONFIG_THINKPAD_ACPI_DEBUGFACILITIES # CONFIG_THINKPAD_ACPI_DEBUG # CONFIG_THINKPAD_ACPI_UNSAFE_LEDS CONFIG_THINKPAD_ACPI_VIDEO=y CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y CONFIG_ACPI_WMI=m CONFIG_ACPI_ASUS=m CONFIG_ACPI_TOSHIBA=m CONFIG_ACPI_CMPC=m Most of that seems I'll post back when and the link to the current config. I was wondering where I might find that. Not looking so promising so far:
default-config custom-config | grep BACKLIGHT
| # CONFIG_FB_BACKLIGHT is not set
<
<
| # CONFIG_FB_ATY is not set
| # CONFIG_FB_SIS is not set
| # CONFIG_FB_VOODOO1 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
| # CONFIG_BACKLIGHT_PROGEAR is not set
CONFIG_BACKLIGHT_CARILLO_RANCH=m
| # CONFIG_BACKLIGHT_MBP_NVIDIA is not set
| # CONFIG_BACKLIGHT_SAHARA is not set
| # CONFIG_BACKLIGHT_ADP8860 is not set
<
<
| # CONFIG_HID_ROCCAT_KONEPLUS is not set
| # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
| # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
<
there to wonder about. CONFIG_FB_BACKLIGHT only gets triggered if certain drivers are enabled. But I don't have any of those. I'm re-compiling right now with one of them, just for kicks, to see what happens. I have the right LCD backlight options set to match the default. On the ACPI front, we have this:
~/def-config .config |grep ACPI
# Power management and ACPI options
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
| # CONFIG_ACPI_PROCFS is not set
| # CONFIG_ACPI_PROCFS_POWER is not set
| # CONFIG_ACPI_POWER_METER is not set
| # CONFIG_ACPI_EC_DEBUGFS is not set
| # CONFIG_ACPI_PROC_EVENT is not set
| CONFIG_ACPI_AC=y
| CONFIG_ACPI_BATTERY=y
| CONFIG_ACPI_BUTTON=y
| CONFIG_ACPI_VIDEO=y
| CONFIG_ACPI_FAN=y
| # CONFIG_ACPI_DOCK is not set
| CONFIG_ACPI_PROCESSOR=y
<
CONFIG_ACPI_HOTPLUG_CPU=y
| # CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
| CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
| # CONFIG_ACPI_PCI_SLOT is not set
| CONFIG_ACPI_CONTAINER=y
| # CONFIG_ACPI_SBS is not set
| # CONFIG_ACPI_HED is not set
| # CONFIG_ACPI_APEI is not set
| # CONFIG_SFI is not set
<
<
| CONFIG_X86_ACPI_CPUFREQ=y
<
| # CONFIG_HOTPLUG_PCI_ACPI is not set
<
<
CONFIG_PNPACPI=y
<
CONFIG_ATA_ACPI=y
| # CONFIG_PATA_ACPI is not set
# ACPI drivers
# ACPI drivers
<
| # CONFIG_THINKPAD_ACPI is not set
| # CONFIG_ACPI_WMI is not set
| # CONFIG_ACPI_ASUS is not set
| # CONFIG_ACPI_TOSHIBA is not set
| # CONFIG_TOSHIBA_BT_RFKILL is not set
| # CONFIG_ACPI_CMPC is not set
is not set | # CONFIG_INTEL_IPS is not set
is not set | # CONFIG_IBM_RTL is not set
is not set <
<
<
<
<
<
<
about right, and the end stuff is all specific laptop drivers.
this is done. The only other thing I can think of is the fact that I compiled in i915 and intel_agp vs. having them as modules. Should that make any difference?

Xinerama with a Mobile Intel 945GM graphics card

Hi,
I'm trying to write a xorg.conf to enable Xinerama. But as you've already guessed it isn't working.
Xinerama works perfectly fine, if i use xrandr.
Could please look over my config and tell me what's wrong?
Thanks in advance!
Informations you may need:
Im using the xf86-video-intel-legacy driver.
This is my xorg.conf:
Section "Monitor"
Identifier "Main Monitor"
EndSection
Section "Monitor"
Identifier "Second Monitor"
VendorName "ACR"
ModelName "Acer X233H"
HorizSync 30.0 - 94.0
VertRefresh 49.0 - 75.0
Option "DPMS"
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
EndSection
Section "Device"
Identifier "0 Intel 945GM"
Driver "intel"
BusID "PCI:0:2:0"
Screen 0
EndSection
Section "Device"
Identifier "1 Intel 945GM"
Driver "intel"
BusID "PCI:0:2:0"
Screen 1
EndSection
Section "Screen"
Identifier "0 Default Screen"
Device "0 Intel 945GM"
Monitor "Main Monitor"
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "Screen"
Identifier "1 Default Screen"
Device "1 Intel 945GM"
Monitor "Second Monitor"
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "0 Default Screen"
Screen 1 "1 Default Screen" LeftOf "0 Default Screen"
# Option "Xinerama" "true"
EndSection
Section "DRI"
Mode 0666
EndSection
# vim: sw=4 ts=4
And this is my /var/log/Xorg0.log:
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux skynet 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 10 April 2009 07:03:14PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 13 22:49:02 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "0 Default Screen" (0)
(**) | |-->Monitor "Main Monitor"
(**) | |-->Device "0 Intel 945GM"
(**) |-->Screen "1 Default Screen" (1)
(**) | |-->Monitor "Second Monitor"
(**) | |-->Device "1 Intel 945GM"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xdc100000/524288, 0xc0000000/268435456, 0xdc200000/262144, I/O @ 0x00001800/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xdc180000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xDC100000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Main Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(II) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "ACR", prod id 147
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
(II) intel(0): EDID vendor "ACR", prod id 147
(II) intel(0): Output VGA connected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA using initial mode 1280x800
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (510, 290) mm
(**) intel(0): DPI set to (95, 168)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules//libvbe.so
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Reloading /usr/lib/xorg/modules//libvgahw.so
(==) intel(1): Depth 24, (--) framebuffer bpp 32
(==) intel(1): RGB weight 888
(==) intel(1): Default visual is TrueColor
(II) intel(1): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(1): Chipset: "945GM"
(--) intel(1): Linear framebuffer at 0xC0000000
(--) intel(1): IO registers at addr 0xDC100000
(II) intel(1): 2 display pipes available.
(==) intel(1): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(1): Output VGA using monitor section Second Monitor
(II) intel(1): I2C bus "CRTDDC_A" initialized.
(II) intel(1): Output LVDS has no monitor section
(II) intel(1): I2C bus "LVDSDDC_C" initialized.
(II) intel(1): Attempting to determine panel fixed mode.
(II) intel(1): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(1): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(II) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(1): found backlight control method /sys/class/backlight/acpi_video0
(II) intel(1): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(1): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(1): No SDVO device found on SDVOB
(II) intel(1): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(1): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(1): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(1): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(1): No SDVO device found on SDVOC
(II) intel(1): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(1): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(1): Output TV has no monitor section
(II) intel(1): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(1): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(1): EDID vendor "ACR", prod id 147
(II) intel(1): Using hsync ranges from config file
(II) intel(1): Using vrefresh ranges from config file
(II) intel(1): Printing DDC gathered Modelines:
(II) intel(1): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) intel(1): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(1): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(1): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(1): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(1): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(1): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(1): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(1): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(1): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
(II) intel(1): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(1): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
(II) intel(1): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
(II) intel(1): EDID vendor "ACR", prod id 147
(II) intel(1): Output VGA connected
(II) intel(1): Output LVDS connected
(II) intel(1): Output TV disconnected
(II) intel(1): Using user preference for initial modes
(II) intel(1): Output VGA using initial mode 1920x1080
(II) intel(1): Output LVDS using initial mode 1280x800
(II) intel(1): Monitoring connected displays enabled
(II) intel(1): detected 256 kB GTT.
(II) intel(1): detected 7932 kB stolen memory.
(==) intel(1): video overlay key set to 0x101fe
(==) intel(1): Will not try to enable page flipping
(==) intel(1): Triple buffering disabled
(==) intel(1): Intel XvMC decoder disabled
(==) intel(1): Using gamma correction (1.0, 1.0, 1.0)
(--) intel(1): Using HW Cursor because it's enabled on primary head.
(**) intel(1): Display dimensions: (510, 290) mm
(**) intel(1): DPI set to (95, 168)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Reloading /usr/lib/xorg/modules//libfb.so
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Reloading /usr/lib/xorg/modules//libexa.so
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(1): Comparing regs from server start up to After PreInit
(WW) intel(1): Register 0x61200 (PP_STATUS) changed from 0xd0000009 to 0xd000000a
(WW) intel(1): PP_STATUS before: on, ready, sequencing on
(WW) intel(1): PP_STATUS after: on, ready, sequencing on
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? Yes, I do.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 488960 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1955836 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
Backtrace:
0: /usr/bin/X(xorg_backtrace+0x3b) [0x813278b]
1: /usr/bin/X(xf86SigHandler+0x51) [0x80dda61]
2: [0xb7fcb400]
3: /usr/lib/xorg/modules/drivers//intel_drv.so [0xb7a5258e]
4: /usr/lib/xorg/modules/drivers//intel_drv.so(i830_allocate_2d_memory+0x144) [0xb7a527b4]
5: /usr/lib/xorg/modules/drivers//intel_drv.so [0xb7a47e2b]
6: /usr/lib/xorg/modules/drivers//intel_drv.so [0xb7a4cafd]
7: /usr/bin/X(AddScreen+0x19d) [0x807167d]
8: /usr/bin/X(InitOutput+0x206) [0x80aeb16]
9: /usr/bin/X(main+0x1e1) [0x8071d61]
10: /lib/libc.so.6(__libc_start_main+0xe5) [0xb7bab6c5]
11: /usr/bin/X [0x8071401]
Fatal server error:
Caught signal 11. Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

Blind wrote:Umm, weelll, xorgconfig or X -config might produce something to work with, but in general you need to edit the xorg.conf file for best performance. As to your editing of 'vga' to 'xf86-video-intel': you should replace it with 'intel'. There are many, many sample xorg.conf's out there that use the intel driver, so google is your friend.
Cheers,
Blind
+1
You can specify the amount of videoram in xorg.conf and you need to add the 1280*800 resolution to it too. That's all I had to do to get it to work on my father's laptop.
Zl.
/EDIT: numerous wiki-entries could help you, f.e. http://wiki.archlinux.org/index.php/Intel_GMA_950
Last edited by zenlord (2008-01-21 09:54:09)

Mouse pointer invisible - intel 945GM

Hey people, thought I would document this in case others have problems. I have partially solved the issue, but if someone knows a better solution please contribute. I think this is specific to the intel xorg driver but not totally sure.
I rebooted my eeepc (Intel 945GM, using stock driver) today and when I got into X there was no mouse pointer. I quickly found that the mouse is in fact there, you can right-click and get a menu etc, its just there is no pointer so your flying blind.
A bit of Googling suggested it was something to do with using xrandr to enable/disable outputs, which is what I do. At home the eeepc sits on the desk connected to my external monitor. In my .xinitrc I have it set up so it detects when its connected to the monitor and automatically enables it (VGA) and disables the laptop screen (LVDS).
So to try and get the mouse back I re-enabled the LVDS
xrandr --output LVDS --auto
The eeepc screen comes back on (in clone mode) and sure enough the mouse pointer is visible on that screen, but not on the external VGA. After a bit of tooling around I found that if you enable both screens in extended desktop mode, the pointer is then visible on both.
xrandr --output LVDS --right-of VGA --auto
Once the pointer is working on both screens you can then turn off the LVDS again, and the pointer remains working on the external, everything back to normal.
xrandr --output LVDS --off
PART 2 - This is actually a question if anyone can help me
In order to use dual monitors like an extended desktop, you will find that you need to set the virtual desktop size in your xorg.conf display section. Something like:
virtual 2304 1024
BUT...since we now bask in the glory that is hot-plugging and hal wizardry, I don't have an xorg.conf. Does anyone know how to set the virtual framebuffer size using xrandr, without having to use an xorg.conf?
And while I think about it, why do we even need to set a virtual size manually really, xorg knows the dimensions of connected displays, you would think it could set a default virtual framebuffer to the width of the connected outputs, would make it much easier. /rant
Anyway, any more info on the subject much appreciated.
Last edited by Wittfella (2009-10-22 14:36:09)

The cursor issue sounds like an upstream bug - you should report it to https://bugs.freedesktop.org.
Wittfella wrote:Does anyone know how to set the virtual framebuffer size using xrandr, without having to use an xorg.conf?
Can't be done. The virtual fb size tells your graphics driver how big a framebuffer to allocate at X start time. It can't be changed later. Which is too bad, and a major limitation of randr. I think it does set the virtual fb size correctly when it starts, but that size will be wrong when you add another monitor for example.

Intel 945GM/GMS/940GML Videoram

I installed Arch on my new Vaio VGN-N21S with an Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller.
http://vaio.sony.it/view/ShowProduct.ac … N+N+Series
I configured Xorg and it runs smoothly with the i810 driver. No issue.
But I can't use the whole amount of my shared video memory (224 Mb from specifics). Xorg uses only 8Mb, which is enough to get a 1280x800 desktop tough. I would like to play with True Combat Elite and I found videoram is not enough. I tried with the "Videoram" parameter in Xorg.conf... but it is simply ignored by Xorg.
Nobody knows where's the problem????
My Xorg.conf:
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
Option "AIGLX" "true"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
HorizSync 30.0 - 64.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 100.0 # Very conservative. May flicker.
#Displaysize 336 269 # 96 DPI @ 1280x1024 (no 4:3)
#Displaysize 336 252 # 96 DPI @ 1280x960
ModeLine "1280x800" 107.2 1280 1360 1496 1712 800 801 804 835 -HSync +Vsync
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Intel 945GM"
# VendorName "All"
# BoardName "All"
Driver "i810"
# Driver "intel"
BusID "PCI:00:02:0"
# Option "UseFBDev" "true"
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
#VideoRam 229376
VideoRam 131072
EndSection
Section "Screen"
Identifier "Screen0"
Device "Intel 945GM"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
My Xorg.log:
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux Surprise 2.6.21-ARCH #1 SMP PREEMPT Mon Jun 11 23:47:51 CEST 2007 i686
Build Date: 08 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 15 18:31:41 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Intel 945GM"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xorg"
(**) XKB: rules: "xorg"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "it"
(**) XKB: layout: "it"
(WW) Option "XkbVariant" requires an string value
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "PS/2 Mouse"
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AIGLX" "true"
(**) Extension "Composite" is enabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81c44a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,27a0 card 104d,8212 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,27a2 card 104d,8212 rev 03 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,27a6 card 104d,8212 rev 03 class 03,80,00 hdr 80
(II) PCI: 00:1b:0: chip 8086,27d8 card 104d,8212 rev 02 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,27d4 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 104d,8212 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 104d,8212 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 104d,8212 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 104d,8212 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e2 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b9 card 104d,8212 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,27df card 104d,8212 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,27c4 card 104d,8212 rev 02 class 01,01,8f hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 104d,8212 rev 02 class 0c,05,00 hdr 00
(II) PCI: 02:00:0: chip 11ab,4351 card 104d,8212 rev 16 class 02,00,00 hdr 00
(II) PCI: 06:00:0: chip 168c,001c card 1468,0423 rev 01 class 02,00,00 hdr 00
(II) PCI: 08:03:0: chip 104c,8039 card 5000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 08:03:1: chip 104c,803a card 104d,8212 rev 00 class 0c,00,10 hdr 80
(II) PCI: 08:03:2: chip 104c,803b card 104d,8212 rev 00 class 01,80,00 hdr 80
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,9), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[b]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xd6000000 - 0xd7ffffff (0x2000000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd1ffffff (0x2000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:28:1), (0,4,5), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
(II) Bus 4 non-prefetchable memory range:
[0] -1 0 0xd8000000 - 0xd9ffffff (0x2000000) MX[b]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0xd2000000 - 0xd3ffffff (0x2000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:28:2), (0,6,7), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[b]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[b]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[b]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[b]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0xda000000 - 0xdbffffff (0x2000000) MX[b]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0xd4000000 - 0xd5ffffff (0x2000000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 8: bridge is at (0:30:0), (0,8,12), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 8 I/O range:
[0] -1 0 0x00005000 - 0x00005fff (0x1000) IX[b]
(II) Bus 8 non-prefetchable memory range:
[0] -1 0 0xdc000000 - 0xdc0fffff (0x100000) MX[b]
(II) Bus 8 prefetchable memory range:
[0] -1 0 0x50000000 - 0x53ffffff (0x4000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 9: bridge is at (8:3:0), (8,9,12), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 9 I/O range:
[0] -1 0 0x00005000 - 0x000050ff (0x100) IX[b]
[1] -1 0 0x00005400 - 0x000054ff (0x100) IX[b]
(II) Bus 9 prefetchable memory range:
[0] -1 0 0x50000000 - 0x53ffffff (0x4000000) MX[b]
(--) PCI:*(0:2:0) Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xdc100000/19, 0xc0000000/28, 0xdc200000/18, I/O @ 0x1800/3
(--) PCI: (0:2:1) Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xdc180000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xdc004000 - 0xdc004fff (0x1000) MX[b]
[1] -1 0 0xda000000 - 0xda00ffff (0x10000) MX[b]
[2] -1 0 0xd6000000 - 0xd6003fff (0x4000) MX[b]
[3] -1 0 0xdc444400 - 0xdc4447ff (0x400) MX[b]
[4] -1 0 0xdc444000 - 0xdc4443ff (0x400) MX[b]
[5] -1 0 0xdc240000 - 0xdc243fff (0x4000) MX[b]
[6] -1 0 0xdc180000 - 0xdc1fffff (0x80000) MX[b](B)
[7] -1 0 0xdc200000 - 0xdc23ffff (0x40000) MX[b](B)
[8] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[9] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[b](B)
[10] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[11] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[12] -1 0 0x00001890 - 0x0000189f (0x10) IX[b]
[13] -1 0 0x000018a0 - 0x000018a3 (0x4) IX[b]
[14] -1 0 0x000018a8 - 0x000018af (0x8) IX[b]
[15] -1 0 0x000018a4 - 0x000018a7 (0x4) IX[b]
[16] -1 0 0x000018b0 - 0x000018b7 (0x8) IX[b]
[17] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[23] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[24] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[25] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xdc000000 - 0xdc003fff (0x4000) MX[b]
[1] -1 0 0xdc005000 - 0xdc0057ff (0x800) MX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdc004000 - 0xdc004fff (0x1000) MX[b]
[1] -1 0 0xda000000 - 0xda00ffff (0x10000) MX[b]
[2] -1 0 0xd6000000 - 0xd6003fff (0x4000) MX[b]
[3] -1 0 0xdc444400 - 0xdc4447ff (0x400) MX[b]
[4] -1 0 0xdc444000 - 0xdc4443ff (0x400) MX[b]
[5] -1 0 0xdc240000 - 0xdc243fff (0x4000) MX[b]
[6] -1 0 0xdc180000 - 0xdc1fffff (0x80000) MX[b](B)
[7] -1 0 0xdc200000 - 0xdc23ffff (0x40000) MX[b](B)
[8] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[9] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[b](B)
[10] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[11] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[12] -1 0 0x00001890 - 0x0000189f (0x10) IX[b]
[13] -1 0 0x000018a0 - 0x000018a3 (0x4) IX[b]
[14] -1 0 0x000018a8 - 0x000018af (0x8) IX[b]
[15] -1 0 0x000018a4 - 0x000018a7 (0x4) IX[b]
[16] -1 0 0x000018b0 - 0x000018b7 (0x8) IX[b]
[17] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[23] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[24] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[25] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xdc000000 - 0xdc003fff (0x4000) MX[b]
[1] -1 0 0xdc005000 - 0xdc0057ff (0x800) MX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xdc004000 - 0xdc004fff (0x1000) MX[b]
[5] -1 0 0xda000000 - 0xda00ffff (0x10000) MX[b]
[6] -1 0 0xd6000000 - 0xd6003fff (0x4000) MX[b]
[7] -1 0 0xdc444400 - 0xdc4447ff (0x400) MX[b]
[8] -1 0 0xdc444000 - 0xdc4443ff (0x400) MX[b]
[9] -1 0 0xdc240000 - 0xdc243fff (0x4000) MX[b]
[10] -1 0 0xdc180000 - 0xdc1fffff (0x80000) MX[b](B)
[11] -1 0 0xdc200000 - 0xdc23ffff (0x40000) MX[b](B)
[12] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[13] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[b](B)
[14] -1 0 0xdc000000 - 0xdc003fff (0x4000) MX[b]
[15] -1 0 0xdc005000 - 0xdc0057ff (0x800) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[19] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[20] -1 0 0x00001890 - 0x0000189f (0x10) IX[b]
[21] -1 0 0x000018a0 - 0x000018a3 (0x4) IX[b]
[22] -1 0 0x000018a8 - 0x000018af (0x8) IX[b]
[23] -1 0 0x000018a4 - 0x000018a7 (0x4) IX[b]
[24] -1 0 0x000018b0 - 0x000018b7 (0x8) IX[b]
[25] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[28] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[30] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[31] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[32] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[33] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules//libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.2.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.7.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "keyboard"
(II) Loading /usr/lib/xorg/modules/input//keyboard_drv.so
(II) Module keyboard: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915),
915GM, 945G, 945GM, 965G, 965G, 965Q, 946GZ
(II) Primary Device is: PCI 00:02:0
(WW) I810: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 945GM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xdc004000 - 0xdc004fff (0x1000) MX[b]
[5] -1 0 0xda000000 - 0xda00ffff (0x10000) MX[b]
[6] -1 0 0xd6000000 - 0xd6003fff (0x4000) MX[b]
[7] -1 0 0xdc444400 - 0xdc4447ff (0x400) MX[b]
[8] -1 0 0xdc444000 - 0xdc4443ff (0x400) MX[b]
[9] -1 0 0xdc240000 - 0xdc243fff (0x4000) MX[b]
[10] -1 0 0xdc180000 - 0xdc1fffff (0x80000) MX[b](B)
[11] -1 0 0xdc200000 - 0xdc23ffff (0x40000) MX[b](B)
[12] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[13] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[b](B)
[14] -1 0 0xdc000000 - 0xdc003fff (0x4000) MX[b]
[15] -1 0 0xdc005000 - 0xdc0057ff (0x800) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[19] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[20] -1 0 0x00001890 - 0x0000189f (0x10) IX[b]
[21] -1 0 0x000018a0 - 0x000018a3 (0x4) IX[b]
[22] -1 0 0x000018a8 - 0x000018af (0x8) IX[b]
[23] -1 0 0x000018a4 - 0x000018a7 (0x4) IX[b]
[24] -1 0 0x000018b0 - 0x000018b7 (0x8) IX[b]
[25] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[28] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[30] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[31] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[32] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[33] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xdc004000 - 0xdc004fff (0x1000) MX[b]
[5] -1 0 0xda000000 - 0xda00ffff (0x10000) MX[b]
[6] -1 0 0xd6000000 - 0xd6003fff (0x4000) MX[b]
[7] -1 0 0xdc444400 - 0xdc4447ff (0x400) MX[b]
[8] -1 0 0xdc444000 - 0xdc4443ff (0x400) MX[b]
[9] -1 0 0xdc240000 - 0xdc243fff (0x4000) MX[b]
[10] -1 0 0xdc180000 - 0xdc1fffff (0x80000) MX[b](B)
[11] -1 0 0xdc200000 - 0xdc23ffff (0x40000) MX[b](B)
[12] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[13] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[b](B)
[14] -1 0 0xdc000000 - 0xdc003fff (0x4000) MX[b]
[15] -1 0 0xdc005000 - 0xdc0057ff (0x800) MX[b]
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[22] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[23] -1 0 0x00001890 - 0x0000189f (0x10) IX[b]
[24] -1 0 0x000018a0 - 0x000018a3 (0x4) IX[b]
[25] -1 0 0x000018a8 - 0x000018af (0x8) IX[b]
[26] -1 0 0x000018a4 - 0x000018a7 (0x4) IX[b]
[27] -1 0 0x000018b0 - 0x000018b7 (0x8) IX[b]
[28] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[32] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[33] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[34] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[35] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[36] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
[37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[38] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(**) I810(0): Depth 24, (--) framebuffer bpp 32
(==) I810(0): RGB weight 888
(==) I810(0): Default visual is TrueColor
(**) I810(0): Option "DRI" "true"
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 7872 kB
(II) I810(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) I810(0): Chipset: "945GM"
(--) I810(0): Linear framebuffer at 0xC0000000
(--) I810(0): IO registers at addr 0xDC100000
(II) I810(0): 2 display pipes available.
(II) I810(0): detected 7932 kB stolen memory.
(II) I810(0): Kernel reported 238592 total, 1 used
(II) I810(0): I830CheckAvailableMemory: 954364 kB available
(II) I810(0): Will try to reserve 32768 kiB of AGP aperture space
for the DRM memory manager.
(II) I810(0): Monitoring connected displays enabled
(II) I810(0): Will attempt to tell the BIOS that there is 12288 kB VideoRAM
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 12288 kB
(II) I810(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): BIOS now sees 12288 kB VideoRAM
(--) I810(0): Pre-allocated VideoRAM: 7932 kByte
(**) I810(0): VideoRAM: 131072 kByte
(==) I810(0): video overlay key set to 0x101fe
(**) I810(0): page flipping disabled
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): BIOS Build: 1358
(==) I810(0): Device Presence: disabled.
(==) I810(0): Display Info: enabled.
(II) I810(0): Broken BIOSes cause the system to hang here.
If you encounter this problem please add
Option "DisplayInfo" "FALSE"
to the Device section of your XF86Config file.
(II) I810(0): Display Info: CRT: attached: FALSE, present: TRUE, size: (720,400)
(II) I810(0): Display Info: TV: attached: FALSE, present: TRUE, size: (1024,768)
(II) I810(0): Display Info: DFP (digital flat panel): attached: FALSE, present: FALSE, size: (0,2059)
(II) I810(0): Display Info: LFP (local flat panel): attached: TRUE, present: TRUE, size: (1280,800)
(II) I810(0): Display Info: Second (second CRT): attached: FALSE, present: FALSE, size: (0,2059)
(II) I810(0): Display Info: TV2 (second TV): attached: FALSE, present: FALSE, size: (0,2059)
(II) I810(0): Display Info: DFP2 (second digital flat panel): attached: FALSE, present: FALSE, size: (0,2059)
(II) I810(0): Display Info: LFP2 (second local flat panel): attached: FALSE, present: FALSE, size: (0,2059)
(II) I810(0): Size of device LFP (local flat panel) is 1280 x 800
(II) I810(0): No active displays on Pipe A.
(II) I810(0): Currently active displays on Pipe B:
(II) I810(0): LFP (local flat panel)
(II) I810(0): Lowest common panel size for pipe B is 1280 x 800
(==) I810(0): Display is using Pipe B
(--) I810(0): Maximum frambuffer space: 130904 kByte
(II) I810(0): VESA VBE PanelID read successfully
(II) I810(0): PanelID returned panel resolution : 1280x800
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules//libddc.so
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level 2
(II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
(II) I810(0): VESA VBE DDC read failed
(--) I810(0): A non-CRT device is attached to pipe B.
No refresh rate overrides will be attempted.
(--) I810(0): Maximum space available for video modes: 12288 kByte

I dont think you need to specify videoram in xorg.conf, xorg should autodetect 256mb for 945gm. try without the videoram and see if it works better. For me it works best when I dont have any xorg.conf and let xorg decide all.

Intel 945GM, Xorg, Kernel - performance

I know there is some sort of transition going on with graphics stuff (take that as your cue that this is nowhere near an area of expertise for me...). I can put up with lack of games but last night I hooked my laptop up to my TV to watch some video and it was all choppy. So, I was trying to improve this....
So this is what I have:
Intel 945GM Integrated Graphics Chipset
xorg-server-1.6.0-1
With kernel26-2.6.28.8-1 I tried EXA and UXA. EXA gave me the issues with video play back and chromium-bsu is really slow.
Some not benchmarks from glxgears:
EXA - ~320FPS
UXA - ~640FPS
XAA = crash...
Switching to UXA gave me good chromium-bsu performance. Yeah!
Then I read that kernel 2.6.29 was supposed to make things better. So I built the rc8-git4 snapshot.
More not benchmarks from glxgears with the snapshot kernel:
EXA ~310FPS
UXA ~550FPS
chromuim-bsu runs at a low frame rate under both.
So it appears kernel 2.6.29 makes things worse... Is there something else I should build along with it? Or some config option I missed?

Hm. I had forgotten to subscribe to this thread :-p
I'm not exactly sure what the relevant part is. I would guess it's the framebuffer stuff, and that the vesa stuff could be deselected. Here's the full config for "Graphics support" and "Framebuffer hardware drivers" that I'm using:
# Graphics support
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=m
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# Frame buffer hardware drivers
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PROGEAR=m
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set

I have two Macs--a flat-screen iMac that uses i-tunes 9 (its max) and a MacBook Intel duo that uses i-tunes 10 (its max). Both are on sharing. I am trying to put the Library from the flat screen i tunes music onto the MacBook. I have carefully followeBook

I have two Macs, an i-Mac flat screen that runs on OSX.4.11 and i-tunes 9 and a MacBook Intel Duo that runs on Snow Leopard and i-tunes 10. I have carefully followed all the Advanced instructions for sharing music libraries, which is not a problem; however I am unable to transfer following the instructions to drag the music I want from t he i-Mac flat screen library onto the MacBook. Help! Please! Also, my new Nano will not accept i-tunes 9 which is where I have my old i-pod contents stored--the old i-pod died. Many thanks!

UPDATE: I disconnected the iPhone, restarted it, and tried again to sync it with the iTunes library on the iMac. This time it worked
Now I'm going to try to transfer the music into the iTunes library on the PowerBook, then sync with that, delete the library on the iMac, and sync the (hopefully full of all my music) iPhone with the iMac again.
Message was edited by: DingNYC

Multiple copies of display on Tecra A7 (Intel 945GM)

I am having problems with my Tecra A7 display, using a Mobile Intel 945GM chip. At one point I started getting multiple copies of my desktop on my screen -- two down, two across, with the very top of the fifth and sixth copy coming in on the bottom.
Initially this was just for the Toshiba and ??Resuming Windows?? screen, but eventually it stayed this way all the time. Windows works normally, just with four really small copies of the desktop. An attached external monitor works fine. I tried checking the Full screen (no borders) box in the Intel graphics manager, as well as all the hotkeys I saw listed there -- nothing helped.

Sounds like the display of your notebook has some connection problems or don't know, maybe there is something wrong in general with the display.
Because, as you already tested an external monitor with your machine, I doubt a driver update or reinstallation would help here.
Nevertheless you could try it, but to get to know what the exact problem is, go to an ASP and let them check your notebook.

I have a MacBook (Intel Core 2 Duo) whose screen will not light up!

I have a MacBook (Intel Core 2 Duo) running on Mac OS 10.5.8. Recently, my display screen will go "nearly" pitch black. "Nearly" because I can still see the outlines of the windows and apps in the background. For a while, I was just restarting my computer or opening and closing it until the screen came back on. Then, my friend told me to use the dimming function to fix it. So far, it has worked, but only if my computer is on brightness level 0-2. Obviously this has been terrible for my eyes and is not a permanent fix.
I've been trying to find out what piece of my Mac is going to need to be replaced. I think it's a video chip, but I'm not sure.... Has anyone else had this problem and can they tell me how much it cost them to fix it? Thanks! (I'm in Japan with a U.S. bought Mac, so my problem is a bit compounded, but here's hoping!)

Ariel...
Try Resetting the System Management Controller (SMC)
If that doesn't help, it could be the graphics card.
Run the Apple Hardware Test

How can I get a copy of 10.7 Lion for my recently purchased Black MacBook Intel Core Duo?

How can I get a copy of 10.7 Lion for my recently purchased Black MacBook Intel Core Duo? Lion is not currently available at the App Store.

if your system will run it see this Apple Software for instructions on how to purchase Lion.

I have an older MacBook Intel 2 Duo processor 2.4Gh 4GB mem running 10.6.8. Yahoo just informed me I must upgrade my Safari (5.1.10). How much can I upgrade from 10.6.8 without degrading performance?

I have and older MacBook Intel 2 Duo processor 2.4 Ghz, 4GB mem, running 10.6.8 and Safari 5.1.10. Yahoo has just informed me that they will no longer support Safari 5.1.10 and my question is how much higher than 10.6.8 can I go to get a better Safari before I start reducing performance on an older computer? It is about 6 years old but runs fine for my purposes.

If you want to stay with 10.6, try Firefox which is still being updated.
Firefox
Check that your computer is compatible with Mountain Lion/Mavericks/Yosemite.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)
Do a backup before installing.
Mountain Lion
If your computer isn’t compatible, you might be able to upgrade to Lion.
Computer Compatibility - Lion                       Lion

MacBook Intel CPU upgradeable or removable?

Is MacBook Intel CPU upgradeable or removable?

Look like the upgradeable processor is not Apple main business, it could happen later on, but from third party like sonnet, etc.
Once they could figure it out the posibility to upgrade it to a newer processor, they surely sell it.
But if the processor is soldered to the logic board than a hack website is probably give you more but risky solution.

Can Anyone provide me with the sound card specs for a 2GHz MacBook Intel Core 2 Duo? The system profiler lists the audio card as Intel High Definition Audio: audiocode 63

Can Anyone provide me with the sound card specs for a 2GHz MacBook Intel Core 2 Duo? The system profiler lists the audio card as Intel High Definition Audio: audiocode 63

ok thankx! but i must to know the output impendatie of my audio card= intel high definition audio? can somebody help me
this is my mac book
http://www.everymac.com/systems/apple/macbook/specs/macbook-core-2-duo-2.0-alumi num-13-late-2008-unibody-specs.html

Upgrade macbook intel core due to intel core 2 due

i have macbook intel core due 32bit and i want to upgrade to intel core 2 due and i want to install lion in to it does it work for me

You cannot upgrade the CPU in a MacBook. You can sell it and buy a new one.

Why can't install adobe illustrator on macbook intel core duo?

I just bought the Macbook intel core duo, specifically so I could use Adobe Illustrator. I installed adobe CS2 and every program installed EXCEPT FOR ILLUSTRATOR! Tech support says Apple and Adobe are working on the problem. Can anyone help me?

Welcome to the Apple Discussions!
I've installed CS2 standard on about ten Intel-based Macs and and CS2 Premium on three Intel-based Macs at work. I haven't encountered any issues. No MacBooks at work though, just Mac minis, MacBook Pros and Mac Pro towers (which don't have the Core Duo chips).
After reading your message here, I made a quick search of the Adobe support forums and couldn't find any messages there about anyone having a problem installing Illustrator CS2 on a Core Duo Mac of any kind.
Our Intel-based Macs are all up-to-date with Mac OS X 10.4.8 and all the extras like QuckTime 7.1.3. Which "tech support" did you contact? Apple or Adobe? If Adobe is aware of the issue and is working on a solution, I'm afraid there isn't much we could do to help you here.
-Doug

MacBook/Intel 945GM + xrandr - TV

Similar Messages

Maybe you are looking for