MacBook internet disconnects when I connect BB10 with USB

Everytime I connect my phone to my laptop via the usb (supplied with orignial device) the internet on my MacBook disconnects and I lose my VPN connection.
It seems the Z10 creates a new 'Blackberry' Network connection which overrides my computer settings. If I disable this connection it is simply recreated the next time I connect my Z10 and my internet disconnects and I lose my VPN connection.
Any idea how I can prevent this? I could do with a setting to switch this behaviour on or off rather than the Z10 assuming I want to use it to connect.

Hey 8lettersuk,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
I have a few questions before I get started:
1. Are you using Cisco AnyConnect as the VPN client on your Mac?
2. What version of BlackBerry 10 are you currently running?  Go to Settings>About to find this information.
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click  Accept as Solution for posts that have solved your issue(s)!

Similar Messages

  • What's wrong with my macbook pro (15" early 2011) when i connect it with TV via hdmi

    What's wrong with my macbook pro (15" early 2011) when i connect it with TV via hdmi

    Hello Alex,
    It sounds like you are getting excessive CPU usage when connecting an external display via HDMI to your computer. I would try the troubleshooting steps outlined in the article named:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    When using an external display be sure to check the following:
    If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
    Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
    Monitor and Display Adapter Table
    About Mini DisplayPort to HDMI adapters
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    Thunderbolt ports and displays: Frequently asked questions (FAQ)
    Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
    Try unplugging the video adapter or cable and then plug it back in.
    If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
    Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
    If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
    Reset the systemYou can reset the Mac's parameter RAM and SMC.Reset the resolutionStart by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Xbox disconnects when laptop connects to network

    My Xbox 360 disconnects from the network everytime my laptop connects. I have static IP on my 360 and automatic IP on my laptop.
    I tried putting my Xbox on automatic, still didnt work.
    I tried putting my laptop to manual - it worked but I can't leave it like this because I connect to different networks (school, home, work, etc).
    Other computers/consoles dont get disconnected when I connect with my laptop.
    Can anyone help me out? Thanks!

    As you are already using static Ip on X-BOX, forward ports 88 & 3074 for the same Ip
    Also try this setting:
    Channel – 1or 11
    Beacon interval – 75
    RTS & fragmentation threshold – 2306

  • Macbook/mac mini can ethernet connected[crossover] with another PC-windows?

    macbook / mac mini can ethernet connected crossover with another PC - windows like Sony VAIO laptop VGN-A297XP CEZ ? If yes can share all services like pc-pc connection ? IF Ethernet speed is 100/1000 for this laptop what is connection speed mac-pc ?

    If you temporarily connect the Mac Mini server to the Time Capsule (TC) by Ethernet, can it gain Internet access now? Is the Mac Mini in the same room, different room/floor from the TC?

  • My Mac simply ignores my Iphone when I connect it with the USB cable. WHY? how Can I fix it?

    My Mac simply ignores my Iphone when I connect it with the USB cable. WHY? how Can I fix it?
    I was able to connect the first time, but after that my computer simply rejects the Iphone and nothing happens. The Iphone doesn't spin or try to reboot even! .
    WHAT to do? I got it today.

    When you say it ignores your iPhone, do you mean it does not appear in iTunes if you launch iTunes? Or it does not appear in Finder? Or does not appear in iPhoto? Or you get an error message?

  • Why can´t  I find my 5d Mark ii in the finder when I connect it with my mac?

    Why can´t  I find my 5d Mark ii in the finder when I connect it with my mac?

    Because it is not a mass storage device that would appear in the Finder. It uses the Picture Transfer Protocol (PTP) to interface with a computer. It can be accessed using an application that uses PTP, such as Image Capture, iPhoto, Aperture, or Canon's software. These applications also support more camera-specific features than the Finder would, such as tethered shooting and possibly camera clock synchronization.

  • Strange behaviour when using connection pooling with proxy authentication

    All
    I have developed an ASP.NET 1.1 Web application that uses ODP.NET 9.2.0.4 accessing Oracle Database 8i (which is to be upgraded to 10g in the coming months). I have enabled connection pooling and implemented proxy authentication.
    I am observing a strange behaviour in the live environment. If two users (User 1 and User 2) are executing SQL statements at the same time (concurrent threads in IIS), the following is occurring:
    * User 1 opens a new connection, executes a SELECT statement, and closes this connection. The audit log, which uses the USER function, shows User 1 executed this statement.
    * User 2 opens the same connection (before it is released to the connection pool?), excutes an INSERT statement, and closes this connection. The audit log shows User 1, not User 2, executed this statement.
    Is this a known issue when using connection pooling with proxy authentication? I appreciate your help.
    Regards,
    Chris

    Hi Chris,
    I tried to reproduce your complaint, but was unable to. I didnt use auditting however, just a series of "select user from dual" with proxy authentication. You might want to see if you can put together a small complete testcase for this and open a sr with support.
    Cheers
    Greg

  • HT4106 I got the USB camera adapter but when I connect it with my ipad mini and my Samsung camera pl120 it appears on my ipad that is too much power.....I don't know what to do????

    I got the USB camera adapter for the ipad mini but when I connect it with my Samsung camera pl120, it appears that's too much power on my ipad mini..,,,so I don't know what to do??????

    If you have the card reader part of the camera kit and your camera uses SD cards, try doing it that way. It is the least troublesome way.
    BUt if that doesn't work, then it may be a setting on your camera. Your camera may be trying to pull power from the iPad for you to download, and the iPad won't put out that much, triggering the error. If you have a power supply for your camera you can try using that. If not, maybe something in here can help you
    http://support.apple.com/kb/HT4101
    you might also check on Samsung's site. See if they have any advice specific to iPads that can help.

  • I have mac book pro and recently changed to Lion.  since then it will not recognise my epson r2880 printer telling me it is not connected when it plainly is with usb connection?

    I have mac book pro and recently changed to Lion.  since then it will not recognise my epson r2880 printer telling me it is not connected when it plainly is with usb connection?

    Turn off your printer.
    Go to System Preferences > Print & Scan > Printers window and delete the printer from the list, then add it back.
    Turn on your printer.
    Any difference?
    Here are some more tips from Apple Support article.

  • My mimipad always give no signal when I connect it with the projector

    MY min ipad gives me no signal when I connect it with the projector please help me

    How is it connected - via cable or wireless?
    Has it ever worked?
     Cheers, Tom

  • I am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...can u pls adv how to access data?

    i am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. my saved photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...all folder are empty.......can someone pls adv how to access data?

    i am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. my saved photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...all folder are empty.......can someone pls adv how to access data?

  • I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?

    I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?

    It needs the user password for the wireless router, that would have been set by whomever installed the router, if that was you then try to find the password. If you can not find the password reset the router to factory default and set it up again.

  • My ipad isnt charging when em connecting it with my laptop any one knows why ?

    My ipad isnt charging when em connecting it with my laptop any one knows why ?

    The iPad pulls 10 Watts of power in order to charge the battery.  The USB port on a laptop only puts out 2.5 watts (I may be off on this slightly but I know it is way less then 10) So yes you do need to use the 10 watt wall charger that comes with the iPad to charge it.  You can use the 5 watt charger from an iPhone but the iPad will not get to 100% charge and it will really overheat the iPhone wall charger.  Only do this in an emergency and keep a close eye on the charger as it will get REALLY REALLY HOT. I only do this when I don't have my iPad wall charger with me and only for about 15 minutes at a time.  Then I let the charger cool down for about 15 minutes before I plug it back in.
    There is talk that future laptops will have usb ports that can push 100 watts but that is a way down the road I am sure.

  • HT1386 i updated itunes 11.1 yesterday and now im trying to get my music on itunes to sync onto my iphone 4s but when i connect it through usb...Itunes is saying " waiting for changes to be applied"?

    i updated itunes 11.1 yesterday and now im trying to get my music on itunes to sync onto my iphone 4s but when i connect it through usb...Itunes is saying " waiting for changes to be applied"? so i dont know what to do cause i just want to sync my music from itunes to my iphone 4s

    I had the same problem and the fix was so easy that I felt a little silly after spending 2 hours with an Apple Technician.  At the end of it all, what I had to do was make sure ALL music was deleted from my iPhone 5 by going into usage and clearing out the music folder.  All I had to do then was turn my phone off and turn it back on again.  I had not done this after my phone upgraded to the new 7.0 IOS.   What's the first thing you do when experiencing computer problems?  Reboot!   It fixed my problem and now my iPhone 5 synchs perfectly when I had it connected to my computer.  I am also on iTunes version 11.1.

  • My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port.  How can I get windows to detect this device?

    My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port.  How can I get windows to detect this device?  A message from windows says: the device has malfunctioned.

    Try TS1363: iPod: Appears in Windows but not in iTunes.
    See also Corrupt iPod classic.
    tt2

Maybe you are looking for