Macbook - IOS 10.5.8 Need Upgrade Help
I have a 13 in Mid-2009 MacBook Pro (Specs below) and need to update my OS since I'm no longer able to install Java Updates (computer used for web and MS office). How do I go about getting this upgraded? Do I need to upgrade to an OS before Mountain Lion? Thanks for help.
Model Name: MacBook Pro
Model ID: MacBookPro 5,5
Processor Name: Intel Core 2 Duo
Processor Speed: 2.53 GHz
# of Processors: 1
# of cores: 2
L2 Cache: 3MB
Memory: 4MB
Bus Speed: 1.07 GHz
There is no safe version of Java for Mac OS X 10.5.8. You will need to either diable Java or upgrade your system. Although your machine should be compatible with Mountain Lion, you don't necessarily want or need to jump ahead three versions of Mac OS X. You should be able to update to Snow Leopard (Mac OS X 10.6) and update to the latest version of Java 6. (Note that, on Mountain Lion, installing the latest Java 6 update removes the web applet plug-in, which can only be restored by installing Java 7. Java 7 won't work in Snow Leopard, but I don't know if the Snow Leopard update removes the plug-in. That would be a question for the Snow Leopard forum.)
If you decide to upgrade to Mountain Lion, you will have to upgrade to Snow Leopard first anyway, so you might as well take that intermediate step first. Snow Leopard can only be obtained at this point by calling the Apple Store on the phone and ordering it.
For more about the security implications of using Java, see Using Java in Mac OS X.
Similar Messages
-
I want to get iBook, Facebook and Skype to my iphone 4.2.1 through my iTune, but I coudn't because it is said that it requires a newer version of iOS. Please I need your help. Thanks
If your iPhone can't be updated to a higher iOS version then the only way to get them is if you downloaded versions of them which were compatible with iOS 4.2.1 and you still have copies of those versions somewhere e.g. on your computer or on a backup - only the current version of each app is available in the store, and as apps (and other content) are tied to the account that downloads them, you will need to have older copies that are linked to your id
-
Macbook pro, 10.6.8 (10K549) upgrade help
Hey there, Im using a macbook pro, 10.6.8 (10K549) and its getting really really slow. would like to upgrade to lion and update the hardware as well, to speed it up and make it process more powerfuly- but it dont know what to do- any help please?
Thanks
RDhttp://www.reedcorner.net/mpg/
-
Need upgrade help for ZEN 3.2 and NW 5.1.
We have a Netware 5.1 network running ZfD 3.2 that spans two locations and
comprises two partitions. We want to upgrade to NW 6.5 and ZEN 7.
I have just found TID10083888 that says that ZfD 3.2 is not compatible with
NW 6.5.
My question is this:
What is the order in which items should be upgraded and to what interim
versions on each step? Keep in mind that each upgrade could be separated by
days or weeks, so the network needs to be functional between each upgrade.
Also, does upgrading NW or ZfD at one location affect operations at the
other? Should both locations be upgraded synchronously?
Clients are Windows 2000 and Citrix.There's only one problem with this approach. I was told in another group
that my first NW 6.5 server should be my CA.
My CA is the main file server and the one doing the WS imports. This would
seem to necessitate a more granular approach, starting with the main file
server and upgrading it to ZfD 4.01.
What do you think?
> I would
>
> 1) Setup a New Server running NW6.5 on which to install the Back-End ZFD7
> services such as WS Import, Inventory, etc.........
> 2) Install ZFD7 and Extend the Schema. ( At this point your ZFD3.2
> environment is uneffected and clueless that anything happened.
> 3) Begin Upgrading the Workstation ZEN components to ZFD7 from 3.2.
> Populate the Registry to point to the new WSImport Server to override
> "ZENWSIMPORT" to let old stations to contiue to funtion.
> 4) Once all of the Clients are upgraded start using the NEW C1 and Snapins
> for ZFD7 to create policies and objects using the new ZFD7 features. The
> old ZFD3.2 policies and appps will still work with the new Client so there
> is not rush.
>
>
> <[email protected]> wrote in message
> news:f%VRf.1873$[email protected]..
> > We have a Netware 5.1 network running ZfD 3.2 that spans two locations and
> > comprises two partitions. We want to upgrade to NW 6.5 and ZEN 7.
> >
> > I have just found TID10083888 that says that ZfD 3.2 is not compatible
> with
> > NW 6.5.
> >
> > My question is this:
> >
> > What is the order in which items should be upgraded and to what interim
> > versions on each step? Keep in mind that each upgrade could be separated
> by
> > days or weeks, so the network needs to be functional between each upgrade.
> >
> > Also, does upgrading NW or ZfD at one location affect operations at the
> > other? Should both locations be upgraded synchronously?
> >
> > Clients are Windows 2000 and Citrix.
> >
>
> -
I started a new job a couple of months ago and with the new job came a company furnished HTC Ozone. I currently have a Blackberry Curve phone for personal use. The Curve is due for an upgrade now and I absolutely hate the Ozone, but I can't talk our company phone person into getting a different phone. What options do I have to upgrade my Curve and switch that phone to my company phone? I really do not need my personal phone anymore either, so I am hesitant about extending my contract for 2 more years.
krogers79 wrote:
What options do I have to upgrade my Curve and switch that phone to my company phone? I really do not need my personal phone anymore either, so I am hesitant about extending my contract for 2 more years.
That is strictly up to your company, not anyone on these forums or at Verizon. Only your company can permit a personal phone access to their account. My company, for example, does not allow any personal cell phones access to their network, wifi or cellular. Must be a company issued device. (Security concerns) Your company may or may not be different. -
Push notifications not working after installing IOS 7.1. Need your help.
whatzapp is working, push SMS notifications have completely gone after installing IOS 7.1
I'm having the same problem. No SMS sound alert and no npush notifications since upgrading to iOS 7.1
Made all the verifications in settings and it's all fine, still having the issue and it's annoying. -
MacBook Pro won't boot, need urgent help.
Okay, let's get the full back story on the computer. I bought it in March 2007, I had a strange light column on my display so I took it into Apple in October to get it fixed along with an issue I was having with AirPort Express, so the computer comes back and they replaced just about everything logic board, display, keyboard / top case of the laptop.. the only thing I don't think they replaced was the hard drive and the bottom part of the case.
March 2008 rolls by and my AppleCare expires. April comes and my computer begins doing this thing where 6-8 hours of use it just "freezes" the mouse still moves and you can still click for a few moments but then it just goes stops doing everything except mouse movement, try to reboot and it makes the chime and just shows the white screen and refuses to work the rest of the day, the next day it always does the same thing. Then the time became shorter, 4 hours, 2 hours, 30 minutes. I was at school at the time and didn't care to mess with it so I just stored it away.
A month later I come back, turn it back on boots up perfectly within 30 seconds and works fine for an hour then repeats the previous crash like symptoms. I ask my computer friends and they suggest it's a dying hard drive - so I send that in to get replaced and pay out of my pocket. No luck. Then my friend points out that while it won't actually boot to CD if you hold "C" on boot up, if there isn't a CD there it detects that and shows the correct error... meaning the CD app just isn't loading on the RAM. Fine... I paid for a new RAM stick. Boots up, immediately crashes.
Boot command results:
Flash P-RAM: works and sometimes allows boot.
cmd-S: never works
cmd-V: never works
C: worked right after I replaced the harddrive, hasn't worked since.
T: starts in target disk mode, don't have a second computer to see if drive is browsable.
Any ideas? Is it the Logic Board? Will Apple cover it since they recently replaced it or no? How much will it cost to get a new one?1) I already said that and I'm not complaining that it's Apple's fault, I'm trying to fix it so I can have a working computer.
2) I'll trust people that work in IT over the pompous "omg-i-got-the-job-so-all-my-friends-will-think-im-in-the-know-on-the-iphone" high schoolers Apple hires at the local Apple store. One told me that Firefox wasn't an approved web browser when I last took it in because the Airport Express card was crap. Hence why I'm asking here where people have actually seen this problem before and recognize the symptoms instead of some kid to read from a script of troubleshooting and then charge me $120 to send it to a tech and get it checked out.
I took it to ProMac my local Apple Authorized Service Provider (AASP)of people who have been working with Macs for the last 15 years, and for $50 they're going to look at it and tell me what they think tomorrow, I'll post the results for anyone else having similar issues. -
i bought macbook pro used one because i wanna start to develop ios apps and i need Mavericks if it is a possible my mac is 10.6 please help me apple
Model Name: MacBook Pro
Model Identifier: MacBookPro5,5
Processor Name: Intel Core 2 Duo
Processor Speed: 2.26 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP55.00AC.B03
SMC Version (system): 1.47f2
Serial Number (system): W8******66D
Hardware UUID: *****
Sudden Motion Sensor:
State: Enabled
<Edited By Host>Back up your data, check your applications for compatibility, and download Yosemite from the Mac App Store.
(121877) -
ACL-list syntax error in PIX after upgrade, need urgent help!
Hello everyone
We have a setup including Cisco ACS + a VPN 3005 Concentrator and a PIX 515E (7.2.4)
We upgraded the PIX version from 7.0 to 7.2.4 and suddenly our downloadable access-list was getting refused when users authenticated against the ACS.
When debuging radius in the PIX we found that entering this line in the downloadable access-list give error and stop the users of getting the ACL.
"deny ip any 192.168.0.0 0.0.255.255"
PIX refused to process their auth request when encountering this line.
Fine we said, we changed the ACL syntax to this : deny ip any 192.168.0.0 255.255.0.0
This made the PIX process the ACL.
We were happy for awhile until VPN users started to complain.
It seems that the VPN 3005 cant deal with the syntax we entered in the PIX!
The VPN 3005 doesnt seem to be able to handle the acl line "deny ip any 192.168.0.0 255.255.0.0" !
It can only handle "deny ip any 192.168.0.0 0.0.255.255" !
Which the PIX cant handle..
I'm a loss at what to do here..
We got VPN users who cant surf now with these ACL problems.
What can I do? Anyone else encountered this?
We upgraded the VPN 3005 to the lastest SW version
Really need some help here guys!
ThanksI don't think Cisco ever changed anything on the PIX. It uses subnet masks from day one AFAIK and VPN Conc uses wildcard masks like IOS. You can use the acl-netmask-convert command on the ASA to fix this issue. This way you define a willdcard ACL on the ACS/AAA server and then use this command on the ASA to use the same downloadable ACL for both devices (PIX,VPNC).
http://www.cisco.com/en/US/docs/security/asa/asa81/command/ref/a2.html#wp1622944
Please Rate if helpful.
Regards
Farrukh -
Need upgrade Macbook pro OS X 10.5.8
I got a MacBook Pro (15-inch Early 2008)
HD-185.99GB
152 GB FREE
run OS X 10.5.8
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP41.00C1.B00
SMC Version (system): 1.27f3
Serial Number (system): W88110KXYJX
Hardware UUID: 6CAA2D99-7A26-59B1-8038-EC15BE7CA804
Sudden Motion Sensor:
State: Enabled
I NEED UPGRADE AND I already know that I should start buying snow leopard from apple , but after that how far can I go with these specifications??? I mean can I run maverick?
Thanks.juliomaxter wrote:
I mean can I run maverick?
Yes.
You also can install up to 6 GB RAM which would be helpful running Mavericks. The RAM specifications for you MBP are 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM. The most reliable sources of Mac compatible RAM are OWC and Crucial.
As you know, Snow Leopard 10.6.8 is required for ant OSX upgrade.
Ciao. -
Macbook running on OS X 10.5.8 needing upgraded, what's the best way to do that?
Model Name: MacBook
Model Identifier: MacBook4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bought in May-ish 2008. It is one of the few black MacBooks. Not sure if all this helps.Upgrading to Snow Leopard, Lion, or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
You can purchase Snow Leopard by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The price is $19.99 plus tax. You will receive physical media - DVD - by mail.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer)
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
3. MacBook Pro (Mid/Late 2007 or newer)
4. MacBook Air (Late 2008 or newer)
5. Mac mini (Early 2009 or newer)
6. Mac Pro (Early 2008 or newer)
7. Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
Am I eligible for the free upgrade?
See Apple - Free OS X Mountain Lion upgrade Program.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.
Model Eligibility for Snow Leopard and Lion.
Snow Leopard General requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider; fees may
apply.
6. Some features require Apple’s MobileMe service; fees and terms apply.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or
Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
Used to have ios 7 betaon my i phone and downgraded to ios 6 so i can upgrade to the official ios 7 but i lost my pc back ups. Please help me
First off, Apple doesn't support downgrading and it can potentially brick your phone. With that being said, if you created a back up in iOS 7 Beta and are trying to restore it to iOS6, you wont be able to. You need to upgrade first then restore from your backup. Don't be suprised if it doesn't work. There is a very real possibilty you may have to start from scratch.
-
MY ipad3 running iOS 8.1 does not upgrade to 8.3. I have downloaded 8.3 but when I press install now and choose agree, nothing happens for hours. Any help?.
You are in the wrong discussion forum, but ok:
-- You say it is running 8.1 now, but your profile says 6.1.3, plse update your profile.
-- Did you download in Mac iTunes? or directly in the iPhone?
if in Mac iTunes: check the following Finder location: Startupdisk->Homefolder (yourname)->Library->iTunes->iPadSoftwareUpdates : the downloaded file should be there and be complete the extension should be .ipsw, if it is not there or not complete you should download again.
if in the iPhone: notice that the install phase and verifying phase and restarting phase need (good) internet connection. -
Catalyst Express 500 24PC IOS Upgrade help?
Hi, I need little help to upgrade my Catalyst Express 500 24pc.
current running IOS is 12.2(25)FY and I want to upgrade it to 12.2-25.SEG6....
As per CISCO these are two different IOS for separate Switches?
or I may proceed simply and it will work...
thanks for your support and help in this regard,
Ajmal AwanHi Colin,
Yes, the switch will power prestandard 7940s. Specs state it works on both 802af and cisco prestandard poe.
Best,
David
Please rate helpful posts and identify correct answers. -
I have been editing a document on my MacBook Pro and iPad, which has the newer versions of Pages. Now, I cannot open on My MacBook. It says I need a newer version of OS. However, I'm not showing a newer version being availabe!!! Can anyone help???
That is Pages for iPad v2.0, which Pages '09 v4.3 can't read.
You need to either stick with the older version of Pages on the iPad or get Pages 5 for the Mac which is only available if you are running OSX 10.9 Mavericks.
Unfortunately that is not the end of your woes because Apple has made iCloud convert the files to Pages 5 now, and Pages 5 has over 90 features deleted on top of doing a shocking job of converting older Pages files.
Peter
Maybe you are looking for
-
how do I keep peace in the house when using giftcards? we have 3 ipod touches on one account, is there a way for each child to use cards without having to share the amount gifted to them?
-
Can numbers open and view excel files with filters applied?
Hi - I don't currently have iWork but was considering purchasing it. I frequently get sent excel files from work (which I view on my iPad 3) that have got filters in the column headings applied and I need to be able to change the dropdown values in
-
Adapter Limitations Of Sender JDBC and Mail Adapter
hi All, could you tell me the limitations of JDBC and Mail Adapter .i need to document these details . Regards Vidya Sagar
-
Switching from Napster to iTunes
I have purchased many songs using Napster. Now, I got my first iPod nano, and want to transfer all my purchased songs to iTunes, but it says the files are protected. What can I do?
-
My worst nightmare came true yesterday. As I was getting out of my car, my brand new iPod Touch 4G slipped from my hand and onto the pavement below. My stupid case from Amazon has yet to arrive, and surely enough, the lower left portion of my screen