Macbook Late 2011 freezing, problem with CPU power management.

Hi everyone.
I have Macbook Pro 15 Late 2011. And i have a problem with it.
When laptop is cold, sometimes, it can freeze. Other then this there's no problems with it, no problems at all.
I solved this problem by deleting AppleIntelCPUPowerManagement.kext, so for now it's getting a little hotter (not very).
And my question: is there any utility or app, which could let me see what AppleIntelCPUPowerManagement.kext is doing with system, so i could see what causing freezes. I don't have apple services in my country, so i can't bring this laptop to repair.
And if you don't know answer to this question, but know forum, where i might find answers, please write it.
Thanks in advance.
Sorry for language, i'm not an english speaking.

Catfish, if you're on AC power, and you don't run with a fully charged battery in the machine, then it won't run at full performance. Plus, if the battery is worn out, then it won't charge to nearly its original full capacity, and thus the machine won't run at full performance on AC power.
Note that, if you leave the battery in a drawer for months without using it, that can kill the battery.
Good luck!

Similar Messages

W520 freeze caused by "CPU power managment in BIOS"

I have been running my Thinkpad W520 seemlessly for the past 4 years.
It started to freeze last monday on win7. Freezes increased rapidly and then occured at logon.
I was able to run win7 in safe mode.
Unable to reinstall win7 or even ubuntu.
Unplugged all peripheral without any succes, then disabled everything in the BIOS (1.41) and it worked again.
It looks like the "CPU power management" causes the freezes. with it disabled, everything is running back.

Hi paa55112
If I am not wrong, none other than reduced battery life.
For SSD, you could try PerfectDisk and use SSD Optimize to improve 4K read / write performance
More information about SSD Optimize
http://www.raxco.com/ssd-optimization.aspx
http://blog.raxco.com/2011/11/16/how-to-optimize-your-ssd-without-wearing-out-its-lifespan/
http://forums.whirlpool.net.au/archive/1725746
Have a nice day!
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
=====================================
Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/62...

T60p - Chirping noise with CPU power management

I've bought a T60p which produces a chirping noise when running on battery. The high frequency noise is disturbing when working with the device, especially in silent surroundings.
I've already contacted the Lenovo Support and they advised me to turn off CPU power management in the BIOS which indeed removes the noise. However, the cost is a significantly reduced battery time.
First the Lenovo guys offered me a high capacity battery to compensate the shorter run time but then they refused and stated that my computer "works as designed" and that "Lenovo doesn't accept warranty".
I can't believe that this is true. IBM and the ThinkPads have been recognized for their excellent quality and customer service for many years. That's why I bought a TP despite it was way more expensive than other Notebooks. Is Lenovo really not interested in keeping the excellent reputation that IBM formerly had? I'd be very interested in a statement of a Lenovo official on this issue...

> every CD/C2D processor makes this noise regardless of notebook manufacturer.
Nope, not every. There are C2D ThinkPads and other manufacturer notebooks without this defect. Sometimes noise level is higher, sometimes lower, sometimes completely silent if you are lucky enough...
amaso, I have the same problem on my brand new T60p, and found a better solution. Try to download RMClock and disable PopUp mode in CPU advanced settings. This eliminated the noise for me and power management still is working.

Problem with installing power manager

Hello,
I've been trying to install power manager 6.36 without success.
The first setup which installs files into "c:\swtools\readyapps\pwrmgrv" goes well. but when im trying to install Power Manager and click next to install to the destination folder ("Program files (x86)\ThinkPad\Utilities) it freezes.
http://postimage.org/image/4plchblmx/ - freezes here and cant do anything but exit the installation.
After it failed couple times I've been trying to install my original power manager 3.48 but it freezes just like 6.36.
*tried to install it with Manual Install & Silent Install - both failed.
What can I do?

I had the same issue with some sw earlier on my laptop with Win7/64 bit. That sw didn't want to be installed and needed the old .NET vesion. At the same time my system restricted old version .NET environment installtion process from M$ site or from sw installation package as I had up to date .NET. The result was I couldn't avoid that strange behaviour.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

MacBook Pro 2011 / HDD replace with SSD - power issue

I recently replaced on a MBP 2011 2.5 core5 the 500 MB HDD with a Samsung 850Pro SSD. All went well with regards to cloning throught the apple disk utility.
But i noticed the MBP seems to "burn" more power, meaning the battery life is reduced. It is not clear to me why replace the HDD by the SSD means a shorter battery life. Is there a compability issue with the http://www.samsung.com/us/computer/memory-storage/MZ-7KE1T0BW ?
Any suggestions ?

Sorry, but you typed, "My 2014 model macbook pro 's logic board got damaged."
Apple does not accept trade-ins. You can try selling it on eBay or Craigslist or sell it for cash to companies like Gazelle.com. Then buy a newer model with the proceeds plus added cash, if required.

[SOLVED] Lid doesn't suspend anymore with xfce power manager

The options "When laptop lid is closed" are set to suspend (and used to work), but still, when I close my lid, nothing happens. Using the logout dialog or the suspend button my keyboard works. Is it a problem with xfce-power-manager, or ACPI not registering the lid event anymore? Any idea how to fix that?
[edit]
I solved that problem by removing ~/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-power-manager.xml, killing the power manager and reloging in my session to flush the settings. Then I reconfigured the lid closed action to suspend (and everything else to my liking).
Last edited by benob (2009-07-08 17:36:47)

Sorry to bother you again, but for some reason it doesn't work anymore...
Somehow it can't lock the GNOME session, because when I enter the above line from /etc/acpi/handler.sh manually as root in TTY1, I get this error:
** Message: Failed to get session bus: Befehlszeile »dbus-launch --autolaunch=c9375f4ea0008d92177b28db000009ae --binary-syntax --close-stderr« brach mit von Null verschiedenem Beenden-Status 1 ab: No protocol specified\nAutolaunch error: X11 initialization failed.\n
If I enter this command inside GNOME, everything works just fine, it locks the screen and suspends.
EDIT:
Setting the XAUTHORITY environment variable properly did the trick. Therefore, I borrowed some lines from here: https://wiki.archlinux.org/index.php/Su … losing_lid
Thread marked as SOLVED again.
Last edited by perpetrator (2011-10-17 14:25:11)

I got a macbook pro 13 inch core i5 late 2011 , it came with osx lion and i been using facebook videocalls normaly , now i updated to Mountain lion but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self i c

i got a macbook pro 13 inch core i5 late 2011 , it came with osx lion and i been using facebook videocalls normaly , now i updated to Mountain lion
but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self i can hear my friends but cant see em, they also can see me and hear me but i just see me and hear them .
any ideas ?

Your wifi problem sounds very much like the problem I had. The wifi would drop out, the icon showed it was still connected. If I turned it off, I couldn't turn it back on. Another user here pointed me to the problem, which was the wifi cable (the flat cable goint from the card to the motherboard). I found it on ebay for $13 and it's been running fine since I replaced it. This is the repair guide for your machine. The part number will be on there if you click the link.
http://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+AirPort-Blueto oth+Cable+Replacement/7510

Defect MacBook 2011. Problems with the video chip.

I was faced with the legendary defect MacBook 2011. Problems with the video chip. Heard about what Apple makes replacement chips for free. My friend a year ago made the change in the service center. Is this true now?

Since Apple says that some copy protected DVD's will not function with Disk Sharing, you may need to "clone" the DVD, using the MBP, to a flash drive, and use the flash drive to perform the installation of the software.
Another alternative is to download and install the Trial version from the Microsoft Office For Mac website, and then use the activation code provided with the DVD to activate the full version install of the trial.

Problem with CPU Voltage

Hello
I build new PC with:
i5-760
Noctua NH-D14
MSI P55-GD65
G.Skill 2x2GB CL7 ECO
Antec TruePower New 750W TP-750
TwinTech GF 9600GT
I have problem with CPU voltage as even when I set it for example to 1.201v in bios, under load it overshot to 1.256-1268. The best is when I oc`ed cpu to 4GHZ and set voltage in bios for 1.30v it overshot for 1.45v+! Not to mention that temps are skyhigh from that. It doesn`t matter if I try to put BIOS Vcore on 1.1v on stock because under load it still rise to 1.16. I turned off all eist, c-state, turbo boost, phase led and switch phase, set vdrop to low and still something is wrong here. I updated the bios under dos from USB stick to newest 1.9 version in order to update CPU micro code without error and it not helped. I want to know is that even possible to fix or should I RMA MB or CPU.
Minor problem is with sysfans as they power on for a second and turn off instantly to start working again when I see list on devices in post. After rebot when my monitor is switched off it takes something like 5 sec to power monitor on and another 5 to show bios, is that normal?

I have similar issues, it's hard to tell which measurement is the most accurate, there are 2 different measurements in the control center that don't match up with the figures set in the bios. The only way to be sure would be to get an expensive accurate multimeter but If you're only interested in running a stable overclocked computer without knowing the exact figures then get the computer running stable and lower the voltages until it starts to become unstable with prime95,
Or you could work the other way round, set the voltages so it boots but doesn't run prime95 for long, then raise the vcore and vtt one at a time until your happy with the length of time prime95 runs without errors. I'd be happy with 24 hours, I seem to remember errors creeping in at around the 9 hour mark on the setting below what I have it set to now.

Is anyone else having problems with the power button?

Someone at work also said they were having a problem with their power button not working? Is it hardware or maybe software?

I had the same problem with my new macbook air. It was scratchy and annoying so I updated the speaker's software and now it's perfect.
http://worldwide.bose.com/downloads/en/web/bose_bluetooth_speaker_download/page. html
hope it solves your problem too.

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Problems with my power adapter!!!!

I just got a new adapter for my Powerbook G4 the other day because the wiring at the plug on my old one wore out. My problem is that the new adapter, when plugged into my computer, sometimes just stops working like it has been unplugged or something. After unplugging the adapter from the wall socket and reinserting, it works fine until my computer goes to sleep. At some point in sleep mode, the little light from the plug in the computer turns off and my computer is only running on battery. This in itself is not that bad, but it gets to be a hassle having to unplug and then re-plug the wall plug everytime my computer goes to sleep. Can anyone help me understand this a little better?

I purchased by G4 six months ago. Since Day one, I have had problems with the power. If I leave the computer plugged into the outlet 24 hours a day, the battery will slowly begin to drain. Even if I never unplug the power source from my computer, the computer begins to drain battery life. For example, I went to bed with my computer charged @ 100%. This morning (all while my computer was sleeping), I have 8% Battery Life left.
I've spent 5-6 phone calls with Apple Care on this issue with no resolution. I sent my G4 off to Apple Care 2 weeks ago and they returned it with a "We Don't Recognize a Problem". I about went through the roof. And, yes, this happens with any outlet I use.
I expect more from a $2500+ machine and their "award winning" customer service.
Help?

Ram for Macbook late 2011

Hi guys.
I found some ram, i'm not the expert, why i'm seeking help here:)
The ram I found is og the type pc3l-10600s-9-11-fp.
Will the work on my 13" Macbook late 2011?

Yes, they works.

Disabling "CPU Power Management" through BIOS -- any bad consequences?

Ok, so my new T440S is emitting a most annoying high-pitched noise. After doing some research, I come to the conclusion that it is the so called CPU Whine.
According to the diagnostics provided on this page:
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T510-T410-W510-ThinkPad-high-pitched-whine/...
Disabling CPU Power Management may silence the noise - as a diagnotic measure, not a solution (as the post asks the user to contact Lenovo support for assistance).
So I tried that and indeed it silences the annoying whine. I have already contacted Lenovo and they said they will get back to me after Christmas. Meanwhille, I am still using this computer, and I am keeping the setting for CPU Power Management Disabled, until Lenovo solves the noise problem.
I was wondering if this (keeping the CPU Power Management disabled) may have some bad consequences - like melting some parts down or something. Would anyone know?
Thanks!

Hi yinslaptop!
I have good news. I have the same problem. My T440s is completely quiet at 43 °C CPU so I don't need any fans to spin. However there is a slight buzz coming out of the middle of the laptop. And it isn't coming from the speakers nor the fan. I didn't bother to open it up yet and check what is causing that noise, but I guess it's related to some coil whine or voltage leakage. As in your case, when I turn off the CPU Power Management option in the BIOS, the sound dissapears completely.
HOWEVER I conicidentally put one SD Card Adapter into the Card Slot and the sound completely dissapeared. I would say give it a try. Sadly the sound comes back in 20 seconds at my machine, but I am using a Sd card adapter with no card in there. Maybe this will change when I put one in. Have to test, because I don't have one lying around.
Lenovo has done a great job. You could to better at this price range, especially when the pc market is shrinking .. it's survival of the fittest. You will see what I mean when you won't get foothold in US and Europe anymore and only will supply Asia.
You won't probably answer this thread and when you do "awww yes, we are deeply sorry, some level buzz is completely normal" CTRL+V bull**bleep**.
Don't get me wrong. I really like the new T440s as my first ThinkPad, but my high order of quality wasn't meet. However I still bought it, because I needed one laptop with really good battery life, good screen and small footprint. Well sorry for the rant.

Z40-70 compatibility issue with your power management system

I noticed today that the Action Center says "Compatibility issue with your power management system." The description underneath is: Your power management system isn't working peoperly because a compatible driver is not available for this version of Windows. When I click on View message details it just says "Your computer was unable to download the solution at this time. Check to make sure your computer is connected to the Internet, and then try to download the solution again later." All power related functionalities however seem to be working. Battery is charging; battery percentage is showing; I can adjust screen brightness. I am not sure when exactly this problem started but it defenitely was not there before. Tried downloading and fixing the Power Management Software and updating BIOS. Still have the same message. System: Windows 8.1 64-bit

What model do you have? Can you post your MTM or model name?
Sometimes these messages are a false alarm.

Macbook Late 2011 freezing, problem with CPU power management.

Similar Messages

Maybe you are looking for