Macbook Memory Upgrade, can I use this memory in my Pismo or Titanium PB?
I just bought a Macbook. I love it. I ordered a 1G of ram. Can I use the 512 memory from the original configuration in my Pismo powerbook or my Titanium powerbook?
No. You must use the memory specified by Apple in your MacBook's User Guide: PC5300-DDR2 667 MHz SODIMMs.
Similar Messages
-
I have upgraded my macbook pro to Lion, using Icloud if take a photo on my Iphone this syncs to my mac however my video does not synce wirelessly from my iphone to macbook. How can I get this to do it.
Thank for the quick response, is there any way of syncing video files wirelessly from IPhone to Macbook or can this only be done by connecting IPhone to Macbook using USB Cable.
-
Hi ...just upgraded my Macbook pro to Mac OSX snow leopard and when I tried to look at my mail, I got this message "You can't use this version of the application mail with this version of MAC OS X". What do I do now to look at my mail and receive new mail?
After updating make sure you repair permissions and restart your computer.
-
I just ran my updates for my MacBook Pro and now my iphoto won't open. I get a pop up that say's You can't use this version of the applicaton IPhoto with this version of os x. You have iphoto 9.2.3.
This screenshot shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
Note 1: every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
Note 2: If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1.
OT -
I have a dollar amount balance on my itunes account... can i use this to purchase apps for my MacBook Pro?
You should be able to. As long as you are signed in to the same AppleID that has an available balance. The services are linked.
-
I want to give the hand-me-down to my kids so they will stay off my MacBook Pro I'd like to start fresh with the MacBook, remove all the former owners information, restore it to factory settings, but it did not come with any installation discs, so I don't know what to do. I recently purchased Snow Lepoard for my 2008 MacBook Pro. Can I use that to restore the MacBook? Also, the former owner purchased Microsoft Office (ugh) with the computer but again, no installation discs. How do I keep that when I restore?
Any help would be appreciated.
Thanks!I purchased a mini to HDMI cable and tried to connect to the TV but the TV is not recognizing the computer. I attempted to set sound and display settings under the "my Preferences" utility with no success. Again, I'm not sure if I need to upgrade my OS software Any Suggestions?
-
I have a router for my PC. Can I use this with a Macbook or do I need to buy hardware?
Your answer confused me for a second (a generic router doesn't need an adaptor for Macs to use) and then it dawned on me you were referring to the enet adaptor the MBA requires
-
Tried my k3772-z modem to connect macbook air to internet and got the message: you can't use this application with this version of mac os x. Is there a setting that needs to be changed?
I can't help you with a direct answer. For third-party devices you should contact the vendor (Vodafone).
If you have an iPhone (or an Android phone with hot-spot capability) you can use that to connect to the Internet without paying for a separate cellular service. -
I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?
In the Mac side of things, backups usually come in two flavors: clones or incrementals.
A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
Holler if you need specifics on how to do each. This was just an executive summary. -
Got a new harddrive in my 2010 macbook pro and rebooted it with time machine back up from a older mac running 10.5.8. I loaded snow leopard 10.6 from disc then updated to 10.6.8 on new computer after restore from back up. Now the Safari icon, system preferences and address book won't open and a box opens saying you can't use this version of the application system preferences with this version of mac os X You have sytem preferences 5.2. or safari says you have safari 5.0.6 etc. How do i update the apps so i can make them actually open. I can get them open in a round about way but not from the icons on my sidebar.
If you have an os on the hdd, why not do a clean install of the os (erase the drive and reinstall osx snow leopard) For snow leopard you insert the osx disk, restart the machine while holding down the c key
http://support.apple.com/kb/HT3910
Message was edited by: victoryhat -
my iPhoto icon has a cross over it, when i open it, it You have “iPhoto” 9.2.1. you can't use this with this version of OSX? it used to work ?what's gone wrong?
iPhoto 9.2.3 is incompatible with MacOS 10.9.3 Mavericks. If you are running Mavericks on your system you need to update iPhoto to 9.5.1. Only, the problem is, that this version is no longer available at the App Store.
The easiest way to get a compatible iPhoto version in that case would be to upgrade to Yosemite, MacOS X 10.10, and then download the most recent iPhoto version from the AppStore, iiPhoto 9.6, like LarryHN suggested.
If you cannot download iPhoto after upgrading to iPhoto 9.6 post back. -
When I try to install Lion it tell's me "You can't use this version of the application install mac os x Lion with this version of Mac os X" even though I have the latest update 10.5.8 of Mac os X?
The install icon has this sign on itmoose0422 wrote:
You can't install Lion over Leopard. To install Lion, a requirement is Snow Leopard. So you can either upgrade to Snow Leopard first or you can make a bootable Lion install disc and use that to wipe your hard drive and install a fresh copy of Lion.
So to make a disk would require you to purchase Snow Leopard and upgrade to 10.6.8 so you can use the App Store, unless you have access to another computer to download it from with your Apple ID. Remember it is about a 3.4GB download.
Good Luck -
I downloaded the OS X version 10.9 and my Iphoto version 9.2.3 will not open. I get a message that I can't use this version of the application I photo with this version of OS X. How do I upgrade to a i photo that will run on 10.9. Do I purchase a new program or can I do just an download?
Check the "Purchases" page in the Mac App Store and see if there is a more recent version there already waiting for you.
-
hello,
i have my iphoto library on my macbook air. how can i duplicate this library on my new imac?
thanksOS X: How to migrate data from another Mac using Mavericks
-
You can't use this version of the application "logic pro" with this version of os x
After installing all of Logic Studio (i.e. install dvd, audio content 1-3, jam packs 1-3), my laptop concludes that everything is installed successfully, however, when going to open to Logic, error icon appears and says:
'you can't use this version of the application "logic pro" with this version of os x'Thank you! I found that just after I entered the question. I reinstalled everything two times, updated software, but was still having issues. But, I specifically updated the 9.1.8 (which was supposedly included in my standard software update). Guess I needed to give it some extra attention and affection.
P.S. - Why do I feel like the more I upgrade versions of OS X, the worse off I am getting or am? Isn't it supposed to be opposite...isn't it supposed to make things better...come on, mac...where you at? mt. lion or mavericks. I'm downloading Snow Leopard to make some programs run. (um, yeah).
Maybe you are looking for
-
Add Undo property to JTextPane
Hi I am getting problem for adding UNDO functionality to jtextpane.My requirement is to undo or restore the data by clicking a button. According to my application requirement i have to add multiple(as many as required) panels to a scroll pane dynamic
-
Can people listening to my iTunes with Home Sharing modify my songs?
If I enable Home Sharing with a password for my household, can others who listen to my songs also change my song ratings, metadata, etc.? Or is there some way to disable them from doing so? Also, if I set "Remember password" for someone connected to
-
Oracle Client version : which one to install?
I apologize if this is not the correct forum, but wasn't sure whether to put it in th general forum or the installation forum. I have the following environments Production Windows 2003 R2 Oracle 9.2.0.8 Windows 2003 R2 Oracle 11.1.0.7 RHEL 5 Oracle 1
-
How to config CSM load balance of http combined https
In this case,when I config CSM for load balance http and https service separately was ok.2 VIPs , 2 Serverfarms, One for http , and one for https .But I found that the https would referred to http information on IIS , because when the client first to
-
Implement screen exit for MM01
Hello all, I follow the instructions from the link below for adding a new tab for MM02-MM03 tcodes. <link to blocked site removed by moderator> I added the tab and i created the screens but now i want to fill my tab with values from mvke table and i