Macbook mid 2007 broken keyboard where close display touch

Hi I have a macbook a1181 and my problem is that my keyboard is broken where the display touch and i know that apple had established this like a factory problem, so is it possible to repair in apple's assistance shop free even if my warrantee is finished or i have to pay for a new one?
thanks

None of us here can give you a definite answer. You need to bring the machine to an Apple store and ask the folks there.
It is true, at least here in the United States, that folks have had their topcases replaced at no charge to the user. I'm not sure if the same will hold true for other countries.
~Lyssa

Similar Messages

Boots only in Safe Mode - Macbook mid 2007

My Macbook mid 2007 with Snow Leopard will not boot correctly. The only successful means is Safe Mode (key S during boot).
All measures published in various postings have been conducted without any peripheral devices. These are:
verify harddisc
verify RAM
resetting PRAM and NVRAM
A detailled overview can be found under here.
The existing original RAM and harddisc were successfully tested using a second identical Macbook. A new installation of Snow Leopard on the harddisc using the second Macbook was successful and started in this second Macbook as expected. This harddisc was then inserted into my Macbook, but it would not boot. Hence it is safe to exclude problems with RAM and the harddisc.
Attempts to boot with the Snow Leopard DVD (either via C plus boot or Option during boot and select Install DVD) are not successful. Attempts to boot from an external drive are also not successful. The boot process (regular, DVD, external) progresses to different states including grey screen with Apple and frozen wheel. There is no consistency.
From the various postings I have found and studied along with my numerous tests, I have deduced the following possibilities:
There is a problem with the GPU.
There is a problem with the keyboard (maybe someone spilled something).
I have found numerous solutions for "boots only in Safe Mode". All include booting via Install DVD, but this does not work in my case.
I have exhausted all my possibilities. Hopefully someone can provide more insight.

lruetimann wrote:
What I am not able to test is booting with an external CD/DVD drive. However, there is no indication that the built-in drive is malfunctioning.
If you have a second MacBook (#2 working OK), you could use its CD/DVD drive loaded with the 10.6 DVD as the target disk to boot into, as the first Macbook (#1 the troubled one) reportedly cannot see a 10.6 DVD normally.
How to use and troubleshoot FireWire target disk mode
In your case this would be:
With the MacBook(1) on (Host), the MacBook(2) off (Target) connect the firewire cable.
Start the MacBook(2), hold T key to make it the boot drive. It will appear on the MacBook's(1) Desktop.
Insert the 10.6 Install DVD into the MacBook(2).
It too will appear on the MacBook's(1) Desktop.
From the MacBook(1), select Restart and hold down the Option key to select Start-up Manager.
From Start-up Manager, select the 10.6 Install DVD which will take you into the installation.
If this occurs, then you have booted into the install 10.6 DVD, From there you could try and install it, see what happens.
However, if it does not see the DVD disk, then this would indicate a defect in the logicboard (motherboard), though which component I would not guess.
If it does see the DVD, in Macbook (2) and can boot into it,… I'd be surprised!

Lost garageband with reinstall macbook mid 2007 with os x 10.7.5

i lost garageband with reinstall macbook mid 2007 with os x 10.7.5 how do i get it back i can't download from app store cause its not supported

return it and get the one from Apple. Most 3rd party batteries are junk.

Best RAM configuration for Macbook (mid 2007)

Hi, I have a Macbook (mid 2007) with 1 GB ram and I would like to upgrade. Currently I have 2x512MB, so both of my memory slots are taken. Is it a good idea to have one 512MB card and a 2GB card in the other slot? Otherwise, what is the best RAM configuration for a mid 2007 macbook?
I am also looking into purchasing this memory card for my macbook, is this a good choice?
http://www.amazon.com/Crucial-2x1GB-200-Pin-667Mhz-SODIMM/dp/B000FQ2JLW/ref=sr_1 _3?ie=UTF8&qid=1307335802&sr=8-3
Any advice would be very much appreciated!

Kappy wrote:
In these early models, Ronda, the benefit is very marginal.
Yes, I read the figure 128 in regards to the benefit. Something about interleaving, maybe?
In doing a Google search for that article I saw, I found this:
http://www.mac-forums.com/forums/apple-notebooks/99215-4gb-ram-my-macbook.html
the maximum amount of RAM your laptop can take is 3.3GB. So while you can physically insert 4GB of RAM, OS X will only be able to see 3.3GB of it.
But I don't know how knowledgeable that poster is who says it can utilize 3.3 GB. I do know that the full 4 GB shows up in the System Profiler on my MacBook Core 2 Duo 2.16 GHz.

Hi, I have MacBook (Mid 2007), It runs on Winodws Xp :( can I instal Mac os?? How can I??

Hi, I have MacBook (Mid 2007), It runs on Winodws Xp can I instal Mac os?? How can I??

Start your Mac while holding the X key down. That should force your Mac to start using the OS X partition.

IPhoto for macbook mid 2007

I deleted iPhoto from my macbook (mid 2007, msc os 10.5.8) more than a year ago. Now I extremely need it , but could not recover it. Is here a way for some how to download the appropriate iPhoto version for my macbook?

Welcome to the Apple Support Communities
Insert the iLife DVD or the second disc that came with your computer to install it. Then, go to  > Software Update and install the latest version. You can also buy iLife '09 in Amazon

Macbook mid 2007 just booght leopard ?

The other day i saw an offer on "las units"on some notebooks on a store (compumundo, argentina), between them there was a macbook mid 2007 unit (2.16ghz white one), the normal price for a similar (but newer) model here is 6999 argentine pesos (1 u$s = 3.17 Arg. pesos), and they were oferring it for 4000 (since it had a scratch, that ended up being glue :P). Since here a c2d 13.3' notebook costs 5000 or more pesos, and comes with a 1.6 ghz one for that price, i had to buy it (i was looking for a nb).
Now my question: my mac came with tiger, do i have to buy Leopard ? or can i get it "for free" since i just bought my macbook ? (for some reason the online warranty check says the warranty last till june 2008, so i had to fax the receipt with the correct info for them to change it).
pd: compumundo is an authorized resealer

You have to buy it yourself. New Macbooks come with Leopard installed.

MacBook (Mid 2007)

Is a MacBook (Mid 2007) compatiable with snow leopard?

Sorry. Unfortunately, I only speak English with a translator
Google. I will try to explain my problem is easier ..
I have an old MacBook release mid-2007. Memory it has 2 GB. So I would like you to know whether you can buy and install .. 4GB of memory?
Thank you!
Hard drive - 250 GB. Divided into 2 sections and installed 2 operating system Snow Leopard 10.6 and 10.7 Lion
Hardware: Here are details of my MacBook
   Model Name: MacBook
   Identifier: MacBook2, 1
   Processor Name: Intel Core 2 Duo
   Processor speed: 2.16 GHz
   Number of Processors: 1
   Total number of cores: 2
   Cache Level 2: 4 MB
   Memory: 2 GB
   Bus Speed: 667 MHz
   Version of the Boot ROM: MB21.00A5.B07
   Version of the SMC (system): 1.17f0
   Serial Number (system): W87207PYYA3
   Hardware UUID: 00000000-0000-1000-8000-001B631CF9C4
   Sudden Motion Sensor:
   Status: Enabled

Hi. When i place in the battery in my macbook mid 2007, The mouse wont work correctly , its hard to click ? why?

Hey, when i place the battery in to my macbook mid 2007 , the mouse gets hard to click. If i hang it little bit loose and place it on the table i cant click at all nearly. why ? please help me

Before you buy a new battery, try resetting the SMC.

My computer (MacBook mid-2007) does not recognise the battery suddenly. A cross appears on the image. I have tried uninstalling and re-installing it but it didn't help. Is the battery dead?

My computer (MacBook mid-2007) does not recognise the battery suddenly. A cross appears on the image. I have tried uninstalling and re-installing it but it didn't help. Is the battery dead?

Welcome to the Apple Support Communities
Try resetting the SMC > http://support.apple.com/kb/HT3964
If it doesn't work, take the Mac to an Apple Store to get it diagnosed

IMac mid 2007 is overheating; where can I download fan control please?

iMac mid 2007 is overheating; where can I download fan control please?

Thank you for the reminder! I have been in the habit of vacuuming but have become lazy of late. This has been a particular issue as the cat spends much of his life under the reading light next the iMac. In fact, I have got so used to the cat being here, that I'd the vacuuming routine.

Nominal/Original battery charge capacity of genuine batteries for 13'' macbook (mid 2007)

Hello everyone,
I just wanted to ask which is the nominal battery charge of a genuine (from Apple) battery for a 13'' macbook (mid 2007). I have just bought a new one, and it has a nominal capacity of about 5500 mAh. I just would like to check if it is in good condition.
When my old battery stopped functioning I checked some information in the web and arrived to the followings conclusions:
Webpages:
http://batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batterie s
http://www.apple.com/batteries/notebooks.html
Conclusions:
- Lithium-based batteries have no memory charge effect. This means, that you don't need to be careful about charging-discharging the battery to 100% and 0% sometimes every 3 months. It also means that you can keep the battery in good health conditions not charging-discharging it at all.
- When you are not going to use your notebook for some months it is best to keep the battery at 40-50%charge (it radically increases your battery lifetime).
- It is also good to keep your battery at "low temperature" when not using it. It seems that 0-20ºC is ok. For example 40ºC is really bad for your battery.
If anyone has any comment about my "conclusions", it will be useful form me .
Thanks for the information in advance,
Jesus

Call Apple Customer Support 1-800-767-2775 (telephone numbers for other countries - http://support.apple.com/kb/HE57). Provide the serial number and specifications of the Mac. They may be able to provide a replacement set of discs for a fee. These discs will be for whatever OS was installed on the computer originally, so if you have an upgraded version you will need to obtain the discs some other way.
You may want to just upgrade to a newer system version. Snow Leopard 10.6 would be a good one for that computer but you would need to make sure it has enough RAM to run it. It would only cost $29 to get Snow Leopard from Apple and for the next 30-45 days until the next OS release in July it is still relatively up-to-date.
Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac", then "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575 - note by K Shaffer - http://discussions.apple.com/message/12921514 : "Some early Intel-based Macs can't use Snow Leopard 10.6 installers; of those, the Core Duo (not 2 duo) were suspect and had issues." - and a qualifier by "a brody" http://discussions.apple.com/message/13028822 : "I think that refers to the ones without at least 1 GB of RAM."

Can i install OS X Mountain Lion on my MacBook (Mid 2007)?

Hi all,
Can i install OS X Mountain Lion on my MacBook (Mid 2007)?
thanks

No, your MacBook must be one of the following models:
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
Read these articles
http://reviews.cnet.com/8301-13727_7-57470261-263/older-64-bit-macs-out-of-the-p icture-for-mountain-lion/?tag=mncol;txt
http://reviews.cnet.com/8301-13727_7-57387846-263/will-your-mac-run-mountain-lio n/

How do I get past question mark on macbook (mid 2007)?

Hello, I am trying to fix a Macbook 13" (mid 2007) for a friend. I believe the hard drive (120gb 5400rpm) had failed because I could hear the read/write heads clicking. It was also displaying a flashing folder with a question mark. I installed a WD Black 320gb 7200rpm drive (I no longer hear a clicking noise) but the system still displays a flashing folder with a question mark - which is understandable since there's no operating system installed. My problem is that after following the instructions I've read on the internet to boot from the DVD (turn on power while pressing the C key), I still cannot get past the flashing folder with a question mark. My friend gave me an OS X install DVD (Version 10.6.3 Snow Leopard) that he said he thinks came with the macbook. I doubt that it did, considering the date on the DVD is 2010 and additinal research indicates the original operating system should have been 10.4.9 or 10.4.10. Anyway, I've tried to get the macbook to boot from the DVD and while I can hear it momentarily spin up a couple of times, it eventually ejects the DVD. I'm not sure if I'm following the correct steps, the version of OS X on the DVD given to me is not compatible with this macbook, or there is something else wrong. I'm willing to try a few more things to install OS X before accepting defeat and giving it back, so any information would be appreciated.

A flashing question mark or globe appears when you start your Mac
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

How do I reinstall iWork on Macbook mid-2007 after hard drive crash? Don't seem to have a disc so must have downloaded it.

Hi
The hard drive on my mid-2007 Macbook crashed. I've installed a new one but don't have a disc for iWork, which I must have downloaded. I can't see a version on the Apple store that looks compatible and I'm not even sure what version I had. I'm using Snow Leopard 10.6.8 and it looks like version 09 won't work. Would 08 be OK? I'm assuming I'll have to buy a replacement as I don't have a record of the serial number. Would be great if I don't.
Thanks

Hi
The hard drive on my mid-2007 Macbook crashed. I've installed a new one but don't have a disc for iWork, which I must have downloaded. I can't see a version on the Apple store that looks compatible and I'm not even sure what version I had. I'm using Snow Leopard 10.6.8 and it looks like version 09 won't work. Would 08 be OK? I'm assuming I'll have to buy a replacement as I don't have a record of the serial number. Would be great if I don't.
Thanks

Macbook mid 2007 broken keyboard where close display touch

Similar Messages

Maybe you are looking for