Macbook mini-dvi to VGA using a xerox xg-71d

Ok i hooked up the monitor to it, the macbook detects it, but i am only seeing a blank screen on the monitor.

I have a 40 lcd tv and have my macbook hookuped to it using the mini display port to vga and it looks really good, but i only use it for watching movies. Dedicated monitors are still better for reading text or playing games

Similar Messages

Macbook Mini-DVI to VGA... To 1080p LCD tv

I was interested in buying a new display for my macbook, using the miniDVI to vga.
Then i saw that new TV's have VGA ports on them to act as moniters, and thought.
42" TV... or 19" moniter... hmm
Currently i have the miniDVI to video cord so i can use my TV as an additional moniter when playin games etc.
But its not clear enough to play the games on that screen.. its good for some videos
But text and games its not good at all.
Is the Mini DVI to VGA a good port?
Would i be able to hook it up to a TV or if not a bigger moniter and have it as clear as the display attached to the laptop?
Macbook
2.0GHz
1GB ram
Vid card is just the old standard one when the black/white macbooks were still new.
Not the cool new ones with nice video cards

I have a 40 lcd tv and have my macbook hookuped to it using the mini display port to vga and it looks really good, but i only use it for watching movies. Dedicated monitors are still better for reading text or playing games

Macbook mini-dvi to vga display resolution issue

Hi,
I'm connecting my 13in first generation macbook to an external LCD display. It's an ACER AL2216W. I'm running latest Snow Leopard.
I could always just click 'detect displays' and it would figure out what kind of monitor I had and I would be off and running at the native 1600x1050.
Now for some reason when I click detect displays, it only shows the laptop native resolutions. There is no 1600x1050 in the resolution list and instead of saying "ACER AL2216W" at the top of the display preferences, it just says "Display"
I've tried rebooting, plugging in and and out my monitor cable to the macbook and a variety of other things but to no avail. I'm forced to use 1024x768 right as it is the only resolution that displays correctly on my monitor.   Any ideas on how to get back the detect display working and have 1600x1050 resolution again?

I have a 40 lcd tv and have my macbook hookuped to it using the mini display port to vga and it looks really good, but i only use it for watching movies. Dedicated monitors are still better for reading text or playing games

MacBook Mini-DVI to VGA - Samsung 32" LCD - Mode Not Supported

I followed the instructions on Apple's site to use the MacBook with the lid closed and an external LCD. It worked perfectly the first time I tried it. (I believe in 1920 x 1024). It seemed a little hard to read so I changed the Display resolution, then encountered the "Mode Not Supported" on my LCD. I unhooked and used my MacBook to change the settings back, but the MacBook seems to revert to the "Mode Not Supported" resolution when I close the lid. Any suggestions? Can I reset the Display Preferences on my MacBook?

I think this procedure should work, but it requires an external USB keyboard.
- Shut down the Mac.
- Have all the following connected:
- MacBook power supply
- External display
- USB keyboard and mouse
- Open the lid on the MacBook and hit the power button.
- Immediately close the lid on the MacBook and start holding down the Shift key on the USB keyboard.
- Release the Shift key once you see the spinning gear on the gray screen on the external display.
The above procedure should cause the Mac to start in Safe mode and hopefully will finish booting into a useable screen. If that is the case, go into Displays preferences and select a known working resolution different from the one the Mac started up in under Safe mode. Now restart normally. Hopefully the newly selected resolution will persist through the normal restart and you will have a working external screen again.

Mini-DVI to VGA cable... LCD TV has female input

I recently bought a mini-DVI to VGA adapter from an Apple store, to connect my MacBook with a broken screen to a UMC LCD TV. When it came to plugging the VGA end into the TV, I realised it has exactly the same connector (female I think) as the TV. This obviously means they will not connect, and I haven't been able to find a connector that will do the job. I was surprised to find that after a fair amount of searching no one else appears to have had this problem, so maybe I'm being stupid somewhere here. Thanks for help.

You need a VGA male-to-male cable to connect the Apple mini-DVI to VGA adapter to your LCD TV:
MacBook > Mini-DVI to VGA adapter > VGA male to male cable > LCD TV

Tv wont recognize mini DVI to VGA cable

Okay so I have a mid 2012 Macbook Pro with the Intel 4000 graphics card. I also had a Mini DVI to VGA cable from my previous macbook. I plugged it into my new macbook hooked a VGA cable to my Panisonic LED, but my TV wont recongize my computer. It won't let me change to the "PC" input unless it can recognize an input. I went into System Setting>display>arrangement and played around with no pravale. I read some previous posts about having to reset the computer with it adapter plugged in, didn't work. Does anyone have a solution?

You need a VGA male-to-male cable to connect the Apple mini-DVI to VGA adapter to your LCD TV:
MacBook > Mini-DVI to VGA adapter > VGA male to male cable > LCD TV

I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

Hall Palm Desert,
if your Mac monitor has Thunderbolt ports, and the PC monitor is on the end of the daisy chain, then you might be able to do it by connecting your PC monitor’s VGA cable to a Mini DisplayPort-to-VGA adapter (e.g. Apple, NewerTech), connecting that cable’s Mini DisplayPort end to one of the Mac monitor’s Thunderbolt ports, and then connecting a Thunderbolt cable between the other port on the Mac monitor and your MacBook Pro.

Using external Display via Mini-DVI to VGA Adapter does'nt work

Hey Guys,
i recently bought a mini-dvi-to-vga adapter.
When I plug it into my macbook and connect it to my 19" external TFT, the MB recognizes the TFT as [Medion] MD30219PH but the display stays blank (no matter if i choose mirroring mode or extended desktop)...
Already changed the Hz-Rate between 59.9, 60 and 75 Hertz and the Resolution also... but nothing happens.
In extended Desktop mode i can even slide the cursor into the area where the display is supposed to be...
Hope u can help me
thx

From what I've been told, using the computer's video output isn't outputting a true NTSC picture. I was told when talking about how the Macbook Pros dropped the S-vdieo port that I shouldn't use that anyways, but rather to go the firewire route. THat was actually converts the video source to true NTSC instead of taking a computer output to a TV. While I have no doubt that it works, I'm willing to bet that you'll see a noticeable difference between the G5 S-video and your MB using firewire. Most consumer camcorders from the past several years do digital (firewire) to analogue (NTSC) conversion, so you probably don't even need a new box.
-Brian

Macbook 13" Core 2 Duo, Mini DVI to DVI will not work (Mini DVI to VGA OK)

I've recently purchased a used Macbook 13" with a Mini DVI out display port. When I try to use a Mini DVI to DVI adapter to an Acer X223W (or a few other Acer / Dell models), the Macbook screen either blinks blue to white constantly or doesn't do anything at all. When I use a Mini DVI to VGA adapter, it works fine, however, the MAC does not give an option for my monitors native resolution (1680 x 1050).
At first I thought there was a physical issue with the Mini DVI port, however the VGA adapter works fine. I've also tried a new DVI adapter in case the first one was defective - same results.
Am I missing something here? I don't think there are options to upgrade drivers on a MAC (I'm semi-new to the platform).
Thanks in advance!
Dan

What happens if you try just the monitor, e.g. keep the lid down on the MB? The MB should be attached to it's AC adapter to try this. Also, some kind of USB device will be needed to wake up the closed MB. Pretty much anything hot-plugged into a USB port on the MB will cause it to wake up. Would be curious to know if a DVI monitor works under those conditions.

Macbook mini-dvi -- VGA projector problems

Hi
At the school i teach at we have problems hooking up our new macbooks to one of our projectors. We use a mini-dvi --> VGA cable to hook up the projector. The mac recognises the projector and it gets listed under screens, the resolution also changes. But no picture is beeing projected by the projector.
If we use a mini-dvi --> s/video/rca cable it works fine, but the quality of the picture is too low. The projector works nicely with the older macs we have, wich use the mini-dv --> vga cable.
Any toughts on what may be the problem, or what we could try?

I am having the same problem. I have to do powerpoint presentations at college and it was so embarrassing to go up there and my macbook not sync up. It use to work. I even bought a new adapter. It did not fix the problem. All the windows laptops were able to sync up to the projector but mine did not. This one one of the main reasons I bought a macbook. I need to take my work to school and connect to projectors. I am using the mini-DVI to VGA adapter. There appears to be no physical damage. When I click detect displays nothing happens. Now I have to redo everything on windows. Please, I hope someone has a fix for this. I am using the following; 2 GHZ Intel Core 2 DUo, 1 GB RAM, Mac OS X 10.4.10

No Apple Remote or Apple Mini-DVI to VGA Adaptor included with new MacBooks

Hi!
I just picked up a new (black) MacBook yesterday from the Apple Retail Store in Meadowhall (Sheffield). I was quite surprised to open the box and find that the Apple Remote and Mini-DVI to VGA adaptor cable are now optional items and no longer included in the package. Okay, they're not expensive (an extra £30.00 to add both of them), but I just thought I'd mention it to let potential customers know.
I have to say that I'm very pleased at the speed bump and the 250GB hard drive though (you can never have too much space). Also good to have 2GB RAM out of the box (rather than paying an extra £90.00 for the 2GB model). Excellent!

bford0001 - 15% restocking fee? Did you buy it from an Apple Retail store? I bought a black MacBook from them just under two weeks ago (a 2.2 with 160GB HD and 2GB RAM) and they let me take it back and walk out of the store without charging me anything!
One other thing I have noticed - why has the L2 cache dropped to 3MB from 4MB? I know the processor is more powerful, but doesn't that mean it would just about level out, because of the reduction? I noticed the same for the £1,299.00 MacBook Pro and that on the other two models, it's gone up to 6MB. Anyone know how this would change the performance?

Mini-DVI to VGA - online video freezes when dragged from MacBook to LCD TV

I connected my MacBook to my LCD TV this morning via Mini-DVI to VGA, and am trying to stream online video. The video works fine when the browser is on my MacBook screen, but when I drag it over to the LCD TV, the video freezes. I tried setting the screens to mirrored as well, and the video wouldn't play (on either). I'm not really sure what else to try. Any help would be appreciated!

Try this...
With the TV connected, go into Displays Preferences and click on the Arrangement tab. You should see two blue rectangles meant to represent the two screens. One of the rectangles will have a white bar across the top, meant to represent the menu bar. Drag the small white bar from one blue rectangle to the other. This will move the real menu bar to the TV, making it the primary display. Now see if your video will play on the TV.

Possible to use old macbook (mini dvi port) with 24 in LED display?

Is there a combo of adaptors that will allow me to use my older macbook (mini-DVI port) with the new apple LED screens- i.e. adaptors allowing mini-DVI to mini displayport connector that comes with monitor?

You need this component and a mini DVI to DVI adapter.
(53913)

No video signal using mini dvi to vga adapter.

I just bought a macmini,the last generation. Separately I bought on the apple store a mini dvi to vga adapter because when I bought the macmini I forgot to buy that....once the adapter arrived I tried to turno on the mini,everything seems to be normal,the mini works,the audio signal is normal and after the startup it asks me to choose the language,but the screen says there's no INPUT SIGNAL. I tried another mini dvi to vga adapter,the vga wire works with my pc so I didn't try another one,I tried the reset of the mini,nothing....do I have to try with "miniport to vga" adapter or is there something else I can try?

I got my Mac Mini yesterday and I am having the exact same problem as you are having.
I've tried on two different TV's but it is just not sending a signal. Is it faulty?

Using second display via eMac's mini-DVI to VGA adaptor

Hi,
I've got a 19inch widescreen display from Acer, model no. AL1916W. I have apple's mini-DVI to VGA adaptor and have connected the second display to the point where it mirrors the screen on my eMac, however I don't want it to do this.
What I had intended is that the second display would act as an extension of my eMacs screen, so I can drag windows across for extra space. Is this possible with the eMac?
Put more specifically, I want to be able to put logic's main (arrange) window on the Acer widescreen, and then have whatever else on the eMacs screen? Is there a workaround to do this?
help much appreciated,
Toby

Hi,
It's funny you should send me that link, I actually found that a couple of hours after posting this and tried it. It worked perfectly, I now have the widescreen running in it's native resolution and working as a separate screen which I can drag stuff in and out of. I came back on here to mark the question as 'answered' but I couldn't find how.
thanks for your help,
Toby

Macbook mini-dvi to VGA using a xerox xg-71d

Similar Messages

Maybe you are looking for