Macbook new hard drive restoring windows stuff on bootcamp patition

Hello, my macbook drive is failing and I have bought a new one. I know how to restore my mac files apps etc from time capsule, but I donlt know how to restore the windows stff - files and applications. Do I need to start again with a new bootcamp partition? any advice here welcome. Thanks. Bill

Reinstalling windows was a NIGHTMARE!. I managed to get windows onto the new hard drive after partitioning it with bootcamp, but then my troubles started - where were the drivers? Nothing operated. The problem being that I have windows VISTA and bootcamp is now only for windows 7, so you can install windows but it doesn;t work. It took a long time , several hours to track down all the relevant drivers on the internet and load them one by one onto my macbook.

Similar Messages

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer but unable to get bookmarks from old drives to new.

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.

Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

Load Leopard on a New Hard Drive with Windows XP already loaded

How can I load a new, fresh Leopard operating system on a new hard drive, with Windows XP already loaded and working on it's own independent hard drive via bootcamp beta. I have been using Tiger on it's own drive and wish to discontinue Tiger and move to Leopard without reloading windows. Can I just put in a new drive, and load Leopard with the Windows drive in place?
Please, any suggestions would be appreciated.
Mac Pro Mac OS X (10.4) Runing Windows and Mac operating systems

Malcolm:
Thanks so much for replying to my question! I am new to MAC and have Tiger and Windows XP on separate drives. I will be removing the drive with Tiger and putting in a new drive to load Leopard and I wondered how that would effect accessing Windows XP since the Windows drive will remain in the system. Is there anything I need to do with bootcamp, since Windows was loaded using the Beta version of bootcamp, and bootcamp icon currently shows in the Windows XP taskbar. Tiger was pre-loaded when the computer was purchased. In fact I had to backdate the beta bootcamp version in order to get it to work. I hope this is not asking too much, but I wondered if there would any problem with Windows after the Leopard load.
THANKS IN ADVANCE!!

New hard drive - restore vs. transfer from time machine

The hard drive in my MacBook went bad and the shop was unable to salvage any of the data. They installed a new hard drive and installed OS 10.5 from the disk I had.
I have a backup on my TimeMachine device that is probably 2 weeks old and want to restore from that. I was instructed to boot up my MacBook with the TM connected and then do a restore. However, when I do this, I am prompted with a welcome, I pick my language and then it asks me if I want to TRANSFER from a device. I am not given the opportunity to get to the Utilities menu, from which I could do a restore.
From reading the various posts, it appears that you can get to the Utilities menu if you boot up from the Leopard DVD, but I have an OS installed on my drive already.
My question is, if I do a "Transfer", as it's being presented to me, will that result in the same state as that of a "restore" from the utilities menu? If not, should I put in the DVD and boot up from that, even though I've got it installed on my hard drive already?
Thanks,
Melba

Yes, tell it you want to Transfer from a Time Machine disk. The word "transfer" can be a bit confusing but it is what you want.
What you're seeing is essentially the same thing the "Migration Assistant" does (which is in the Utilities folder). Migration Assistant was originally created to let Mac users just "move in" to a new Mac if they buy a new machine. It connects to the "old" machine, finds all the applications, user accounts, and a few other things, and then copies them over to the new machine so that everything is all set up and ready for you to go.
When they invited Time Machine, they implemented a restore by putting it into the same Migration Assistant. It sees the latest backup on the Time Machine pretty much exactly as if it were looking at the hard drive of another Mac and it's transferring all the info over to your new hard drive.
Both methods would restore your applications, and ultimately even all your user data. But the advantage of doing it now (vs. letting it finish booting the system and doing it later) is that if you tell it you want to do it later, it'll end up prompting you for your name, etc. and building a user account for you. Then when you try to do a restore via Migration Assistant later (to restore you apps & data) it will complain that an account under that name already exists and to pick another name.
If you just let it run the migration now it will create your user account exactly as it was from the last backup.

New Hard drive and Window disc

I bought a dv6-6047cl before, and the hard drive is not working now. (No window disc with the laptop)
So i buy a new hard drive,after i put the new hard drive and it shows me
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
What should i do?
Someone told me i should buy a new window 7 Home to RESTORE TO FACTORY SETTINGS. Is that right?
If yes, which CD should i buy? Can you show me the picture?
If not, what can i do?

you download the ISO then you need use the Microsoft tool to make the bootable memory stick or cd.
Use the links in my 1st post for the Microsoft tool & a guide on using it.
Once you have your boot media made you need plug in the usb stick or load the cd & then boot notebook & enter boot option menu & boot from cd or usb drive pending on what you decide use.
A very basic guide on installing windows 7 is in link below, don't follow it blindly, just use it as a rough guide as needed & think twice, do some research or ask questions if hae doubts<>problems ...
http://www.wikihow.com/Install-Windows-7-for-Beginners
Like my post? Click Kudos (thumb+) to show appreciation.

Install new hard drive, restore from Time Machine, File Vault Problems

Hello all,
I spent way too much time on this seemingly simple task, so I thought I would share my experience with others so they can avoid some pitfalls when upgrading a hard drive in a system that uses File Vault 2 encryption. The basic goal here is to replace a drive in a system that has only one drive, and the OS is Mavericks, and then have the new drive encrypted as before.
The problem is that a Time Machine restore onto a new drive will leave that without a Recovery Partition, which is required for File Vault 2 and some other important things. So we need to build a recovery partition. There are possibly several ways to do this.
Here's what worked for me (this is compiled from many sources that I found and already closed the tabs in my browser so I can't list all my sources):
1) Make a full backup to an external hard drive using Time Machine.
2) Go into the App Store and download OS X Mavericks but dont install it (close the window when it pops up asking to continue the install). Do this even if you already have Mavericks. At this point, there will be a folder in your Applications folder called Install OS X Mavericks (or similar).
3) Insert a USB drive that is at least 8 GB and format it using Disk Utility, naming it the default "Untitled".
4) Open a terminal and type
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
5) Wait for this to finish (took me about 30 min). Eject the USB drive and power down.
6) Remove the old hard drive and set it aside. Keep it for a few weeks until you know the new drive is working as expected.
7) Install the new hard drive and insert the USB drive. Hold the option key and press the power button. Choose to boot from the USB installer.
8) Use the disk utility to erase whatever partition shipped with the new drive, replacing it with a Mac OS Extended (Journaled) system. Verify that GUID is the partition type (in Advanced options).
9) Close the disk utility and install Mavericks. This can take a long time. My new drive is an SSD, and it sat at the "1 second remaining" part for about 20 min. Let it reboot (maybe it was 2 times?) and go through the setup until it finishes the install.
10) Boot into the freshly installed OS and open a terminal and type:
diskutil list
11) If there is a partition listed as Apple_Boot Recovery HD (mine was 650 MB), then you now have a recovery partition. If not, then go into the App store and download Mavericks, but don't use the USB this time, choose to do a regular install (or reinstall to be more correct).
12) Now there will be a recovery partition on the new drive and Time Machine will not overwrite it when restoring. Power down the system.
13) Plug in the Time Machine backup drive used in step 1. Press the option key and power on. Choose to boot from the recovery partiton (Mavericks).
14) Choose to restore from Time Machine backup. Wait until it finishes and log into the old familiar account.
15) Start a terminal and verify the recovery partition is still there (type diskutil list and see that the Apple_Boot Recovery HD is there). If it's missing, choose to download Mavericks from the App Store again and run the installation from this one.
16) Once there is a Mavericks recovery partition on the restored data you can simply turn on File Vault from the System Preferences Security section. It will require a reboot and then you login and wait for it to finish.
What a major pain to go through all of this for the sake of upgrading a hard drive. This should not be anywhere near as complicated. I hope this helps others avoid the very time consuming trial and error I went through in developing this procedure.

Talked with Apple last night. Everything we did to restore lost images failed to fix the issue. I did have the images still on my camera's SD card so I was not breaking out in a cold sweat.
All Time Machine backups showed the same issue. HOWEVER, I suddenly remembered I also had a SuperDuper backup and voila. The images were there.
Moral of the story: you can't ever be too rich or have too many backups (I also have an offsite backup).

How to use recovery dvd on new hard drive, install window 7

hello, i have trouble with my laptop. my hard drive got bad sectors and now i need to replace my hdd to new one. im not sure how to reinstall window 7 on my new hdd.
is it possible to install operating system on new hard drive using recovery disk? and how?

Hi,
Yes, recovery discs will work on a new hard drive, but it's generally best to ensure that the replacement drive is of the same capacity ( slightly larger is Ok ) as the original - recovery discs can have issue when used on a drive that has a smaller capacity than the original.
When you have replaced the HDD, all you need to do is as follows.
Tap away at the esc key as you start the notebook to enter the Start-up Menu.
Insert the 1st Recovery Disc.
Select Boot options ( f9 ), use the arrow keys to select the CD/DVD drive and hit enter. You may also get a prompt to 'Press any key to continue' - do this if asked.
You will be prompted to insert subsequent discs as required.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

New hard drive and Windows 7 issues

I bought a new 1 Tetra Samsung hard drive for my computer since 150GB was not enough. I did this because I need windows partitioned for school. After I installed the hard drive and inserted the Mac OS disk, it would not recognize the hard drive to install. Since then, I have read previous forums such as: https://discussions.apple.com/thread/3322843?start=0&tstart=0
Now, the issue is: I went ahead and installed my Windows XP SP2 because I could not get Mac OS to install. I have also downloaded the Windows 7 Professional update from Microsoft and have a Operating Disk on its way in the mail. I am having some issues with sound and camera and probably others that I don't know about yet, like my graphics card and such. What should I do?
1. Erase HD and install the Mac OS, because I do want this on my computer. Then download updates for Windows 7 bootcamp and reinstall Windows 7 when I get it in the mail.
or,
2. Is there a way to fix the driver issues that I am having without having to reinstall windows. I have not tried to partition yet and install mac.
I think it would be best to:
Install Mac OS
Download updates
Bootcamp and Install Windows 7
What do you think and do you have any advice as how I should go about this. Oh, btw, living in a PC world and coming home to my Macbook Pro 3,1 and realizing that it is not as functional is kinda disappointing.
So, I found this site for the sound: http://www.stuffedcow.net/macbook_audio
And: http://www.cirrus.com/en/products/cs4207.html
I am not sure how to go about installing a new driver. Do I download and save or do I run a certain .exe?
I found this post and was reading, but I am not certain about the right driver for the sound. If I erase the hard drive and install mac. Then, bootcamp and install windows, will I loose my wifi driver? Windows 7 should have that update, but according to this post, it may not.
https://discussions.apple.com/thread/2534313

If I were in your shoes I would want to understand why I couldn't install OSX on the internal drive before going any further. Without getting past that hurdle you may or may not be successful in your aims, but you are outside mainstream intended ways of running Bootcamp.
Just a couple of starters:-
1. Is your internal hard drive (samsung) formatted with a GUID partition table and HFS+ file system? All done in Disk Utility, booted from the Install disk.
2. The Apple Install disk (plus subsequent Apple Software Updates) has all the drivers Bootcamp needs, without having to find and download from elsewhere. I run Windows 7 64 bit on two Macs and have never had to go and find a driver. (Of course Windows does it automatically for me for other hardware). Sorry if this next point is insultingly obvious, but just to check that you know you can put the Apple Install Disk in while running Windows and Windows find the installer.
You don't say anything what your MBP is or what version of OSX you are running. I am not fully up to date with the inplications of Lion and Bootcamp drivers as there is no install disk. I believe 2011 MBPs won't run XP.
Your comment "Oh, btw, living in a PC world and coming home to my Macbook Pro 3,1 and realizing that it is not as functional is kinda disappointing" implies that you haven't had a Mac very long. Although Macs are easy to pick up and use, there is a LOT to learn about customisation and using it properly and getting the most out of them. I have a number of relatives who still use OSX "out of the box"....it's like driving a car in first gear, and complaining "this car doesn't go very fast". Not a perfect analogy as speed is not the issue here.
Sorry if some of this post is missing the target...just take on board the bits that apply.

New hard drive, restored with time capsule -- safari won't open

Just successfuly replaced my crashed 500gb hard drive with a 2TB drive. Used time capsule to restore the system (what a godsend), but now programs on the computer arent working. I tunes opens, then crashes, the app store just bounces down in the application bar for a while then stops, safari opens 80% of a page and then the window crashes and goes away. I get a feeling it has something to do with my recent repairs, but what? Any help would be appreciated. this is very frustrating.
Original system is a white intel iMac 500GB 20 inch screen EMC# 2018.

ok, sorry for being new at this, but I just tried "repair disk" and have an almost infinite array of permissions errors....so many that it crashes when doing the repair. Is this a problem with the drive itself, or the fact that i restored an entire system onto a new drive? Either way, is it fixable?

Installing new hard drive with Windows XP on T40

My 40GB IDE hard drive on my T40 is dying. PC Doctor reports failures. I reformatted and reloaded from factory defaults with pre-loaded software, especially including Win XP. Even upon reformat, Windows discovered (and marked) many unrecoverable bad sectors.
So I decided to buy a 120 GB IDE drive (same mfr Hitachi with same drive telemetry i.e. cylinders, heads as my dying drive.
I also bought a USB to IDE cable - works well - have both IDE drives active.
I used a piece of software called BounceBack Ultimate by CMS which is supposed to copy the exact image, including partitions, boot sectors, system software, etc. from one drive to another.
I went to Windows Explorer, made sure I was able to view hidden and system files, and it looked like it worked - all files and folders that are on the old drive are on the new one.
I shut down the system, put the new drive in the internal bay, but I cannot get boot - just a flashing underscore of a cursor in the upper left corner of the screen after some drive activity.
So, I remember the good old DOS days when I could reformat with the /S option to make the disk I was formatting bootable with the OS version I was booted under.
There HAS to be an easy way to do this! I do not have any OEM version of Win XP since this is preloaded on the hard drive that is failing.
I know I have to be missing something easy. Seems like I should be able to format the new IDE drive via USB and transfer the OS while my old drive is still limping along.
Help. Thanks!

BounceBack Tech Support gave me a different version of their image copying software and the new drive booted.

Portege 3490, install new hard drive with windows xp ready loaded?

My hard drive failed recently on my portege 3490. I bought a replacement seagate 20gb hard drive. I installed Windows XP pro by connecting the drive (via adaptor) to my desktop and running the setup cd.
I thought I could then just fit the drive back into the Portege and be good to go. However when I turn on the system straight away asks me to insert system disk.
I have no floppy drive and my only cd is a usb drive and I cannot use this to boot.
Has anyone got any ideas how I can get this working?
I plugged the same drive into my other notebook (non Toshiba) and it boos straight away. Thanks for your help
[Edited by: admin on 27-Jun-05 07:03]

Hi
I have no real solution for you except that I can confirm that the ay you installed Windows and then moved the HDD is generally not a good idea.
In your case I think what is the primare problem is that the BIOS'es in the 2 different PC's look at the HDD in different ways. That means that even though both systems might say that it is a 20GB HDD they read it differently and therefore the 3490 gets only 'strange' data from the disk.
Even if it had been able to read the contents still it is not a good idea to do the installation this way because if the chipsets differ too much then Windows will not be able to boot due to wrong drivers.
My suggestion is to
In the 3490 format the HDD with FAT32.
Once again attach the 20GB to the other system.
Copy the contents of the i386 folder of the Windows media to the HDD.
Put the HDD back in the 3490.
Boot up on a DOS/Win9X diskette and enter the I386 directory. Start the installation from there.
A little bit of fiddling but should give you no problem with boot up.
Good luck
Tom

Total hard drive crash----how to restore on a new hard drive?

Hello my name is Denes I am 72 years old and love my computer My hard drive had crashed and I am not familiar as to how to restore the Lento tablet section to my new hard drive. Windows 7 is functioning OK but I do not have full Lenovo x61 tablet functionality. Your help and advice will be appreciated----------------Cheers---------------------Denes

That helps, thanks.
You are asking about tablet functions, which ThinkPad exactly are we talking about? It maybe I need to move this thread to the board for Tablet systems as it's in the T series board at the moment which aren't Tablets.
it would be helpful if you could post the Type and Model Number this will help members to help you. Please do NOT post your s/n.
That said, in control panel > add remove progams or programs and functions, (where you can add remove software), there is an option on the left side to add / remove windows features. It may be that you need to select the feature you are looking for and let it install.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

New Hard Drive- How to upload from iPod Photo without access to old drive

Needed to purchase/install a new hard drive after Windows corruption on my old pc. My iPod Photo is completely backed up with my entire library/playlists, etc. Old music files were copied to my new hard drive but the iTunes application needs to be reloaded. I am hoping there is a way to sync my iPod with the new version of iTunes on my new hard drive and have the iPod used as a backup drive. Everything I read about this suggests I need access to my old hard drive to change settings on the iPod before I will be able to upload to the new software from the iPod. Does anyone know if what I want to do is possible so that I can retain all of my playlists, etc the way they are? Thanks so much.

Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using a lot of the utilities your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows. The procedure is a bit involved and was written long before iTunes 7 and Vista so it requires a little adaptation, also it won't recover playlists but if you're interested it's posted in this thread: MacMuse - iPod to iTunes
If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. This is just a selection, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. Have a look at the web pages and documentation, they are generally quite straightforward. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
YamiPod Mac and Windows Versions
iGadget Windows Only
iPod Access Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions
TuneJack Windows Only
CopyPod Windows Only
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.

How can i add bookmarks from my old hard drive to new hard drive on the same computer without overwriting the new bookmarks on my new hardrive? Cheers

The old hard drive was operating on Xp and new hard drive is Windows 7, if this makes any difference.

Unfortunately there is no simple method and, the workaround is far from perfect. The .json files Firefox uses overwite the existing bookmarks but the .html option appends and does not overwrite.
First of all backup all bookmarks on each hard drive. The best method of doing that is to backup the Firefox profiles, that captures the bookmarks databases (''places.sqlite'') and the autobackups that Firefox holds.
* [[Back up and restore information in Firefox profiles]]
* [[Restore bookmarks from backup or move them to another computer]]
#First ensure you have the largest databsae on the current install of Firefox. If necessary
##Locate the Firefox Profile on the old drive
##* [[Profiles - Where Firefox stores your bookmarks, passwords and other user data]]
##Open Firefox and find the profile that is currently in use.
##*Quick method <br/>Use FirefoxButton -> Help -> Troubleshooting Information [Open Folder] <br />(No certain of exact wordings, OR navigate to ''about:support'' )
##* [[Back up and restore information in Firefox profiles]]
#Now use HTML backups to transfer from the smaller database the basic bookmarks.
## Close Firefox & if the old database is the largest one use the Operating System copy option to overwrite the existing places.sqlite so that Firefox now uses the old database
## Reopen Firefox but this time open using the old profile. The easiest method of that may be to disable the new drive from the Bios or alternatively use Firefox profile manager and register the old profile location and open firefox with that profile
##* [[Use the Profile Manager to create and remove Firefox profiles]]
## Export the bookmarks from the old profile using the Firefox Library and the HTML option.
##* see [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]
## Close Firefox, reopen new version/newprofile and import the HTML.
You now have the largest database of complete bookmarks with tags etc. , plus additional bookmarks from the smaller database added on. Obviously you may have some duplication

Migration after new hard drive installed

I need to copy all my files and setting in the windows 7 partiton from my old hard drive to new hard drive. The new hard drive has been partition thru bootcamp, and everything on the Apple side migrated fine and used bootcamp to install windows 7.

Check out Winclone.
https://twocanoes.com/winclone/

Macbook new hard drive restoring windows stuff on bootcamp patition

Similar Messages

Maybe you are looking for