MacBook no boot safe mode help

Please excuse me as I am writing this on my iPhone.
I would love to know if there is anything I can do to get my MacBook to reboot, here is what happened.
It was at the very max of HDD capacity
I was doing too much and the wheel was spinning more and more
I opted to force a power down when I fet it was safe and after that it will not boot
I can use safe mode, cannot repair the drive
I went to a local computer store and was able to boot from a USB, but Disk Utility could not repair the volume
I am away from home on business so I do not have access to any external drives or other recovery software
Is there anything else I can try to do from Safe Mode?
TIA
HENRY

You need to have a minimum of 10% of the hard drive's capacity as free space. Bad things can happen when the free space drops down as low as yours. If the drive's directory is sufficiently corrupted even deleting files may not help. This would seem to be your problem since you could not repair the disk using Disk Utility from the USB drive. And, you cannot repair the disk if you are using it as the startup volume.
It would be more helpful to tell us what model MBP you are using, hard drive capacity and type (HDD or SSD), and version of OS X currently installed.

Similar Messages

PowerPC G5 iMac only booting up in Safe-mode - Help!

In July of 2005, I purchased my PowerPC G5 20" iMac, 2.0GHz, +260 GB harddrive and 2 GB of DDR SDRAM. It has been running so great that I even upgraded to Leopard OS 10.5.6 in June of 2011.
However in Nov. 2011, the computer would freeze upon start-up, and I would have to hold the power button to shut it down. After waiting a minute I would start it up and the OS came up ok. But each week I had to shut it down and restart a few times before it booted up ok. I ran the OS Disk Utility to repair permissions and it did not seem to make a difference. I also ran MacTuneUp 3.6.0 (purchased it in 2010), and there was also no difference.
Now I can ONLY boot into Safe-mode - Help!!!

Discovered something new!
I left my iPhone connected to the iMac, and when starting up the computer the iPhone started charging. When the screen froze (light blue shade, not black screen), the iPhone stopped charging. (no charge?).
BTW....my mouse always moves when in frozen state.
I also tried starting up (c-key) using OS 10.5.6 CD and computer also froze in light-blue screen. The computer tried to access the CD but then gave up. After leaving the computer for awhile the screen power saving mode was on (screen was black). When I moved the mouse the screen changed from black to light-blue screen. Boot CD did not work. No keyboard commands work. Only holding the power button will shut down the computer.
Help!!

Sound using my macbook pro in safe mode?

Can i enable sound using my macbook pro in safe mode?

About Safe Boot:
http://support.apple.com/kb/ht1564
OS X Mavericks: Start up in safe mode
Starting up in “safe mode” may help you diagnose problems you’re having with your Mac.
[Note: To print these instructions, open Help Viewer’s Action pop-up menu (looks like a gear), then choose Print.]
Shut down your Mac and wait 10 seconds.
Press the power button.
Immediately after you hear the startup tone, hold down the Shift key. You should press the Shift key as soon as possible after you hear the startup tone, but not before.
Release the Shift key when you see the gray Apple logo and progress indicator (spinning gear).
To leave safe mode, restart your Mac normally without holding down any keys during startup.
{The third-party utility scan you installed may be something (hard) to be rid of, too}
You could try to boot into Recovery and use OS X Utilities, such as Disk Utility to
repair disk permissions, and other things, to avoid initial startup in OS X itself:
•About OS X Recovery:
http://support.apple.com/kb/ht4718
Good luck & happy computing!

Late 2008 Macbook Freezes 5 Minutes into use with newly upgraded Mavericks, works on safe mode; help troubleshooting?

Hi, I have a late 2008 Macbook - I upgraded it from Leopard to Snow Leopard a year ago and things ran relatively smoothly. A friend suggested I try Mavericks after I have been getting a few error messages with snow leopard and was forced to hard restart. I upgraded to Mavericks last night - the installation went smoothly, however Macbook has since begun freezing every time I am using it for more than 5 minutes. I checked some other discussion forums and I wasn't having the same problems as others - Chrome is updated; I don't use Apple Mail; don't have a lot of third party software (I think). I downloaded EtreCheck and ran on both safe mode and normal mode - things seemed relatively normal except I hadn't backed up my time machine (woops). I saw that Sophos was running a lot on start up - I don't use it so I uninstalled it using the developers instructions (Library/Sophos/Uninstall_Sophos) and than trashed the Launch Daemons that were com.sophos...
So far nothing has solved my problem. My macbook will start in both modes - but only functions in safe mode. It will run smoothly in normal mode for 5 minutes or so - and I am honestly not sure what triggers the freeze. I copied numerous log files to see if someone could help identify the problem (they run through 2 hard shut downs and finally a restart in safe mode) as well as the safe mode EtreCheck report. I can get a non-safe mode EtreCheck if that will be helpful, just let me know.
Anyone have any advice on what my problem is? Thanks!
Link to Log: https://www.dropbox.com/s/5ux2r8i972orf37/Macbook%20Mavericks%20Fail.log
EtreCheck (Safe Mode)
Hardware Information:
          MacBook (13-inch, Aluminum, Late 2008)
          MacBook - model: MacBook5,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          NVIDIA GeForce 9400M - VRAM: 256 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0
          AirPlay: Version: 1.9
          AppleAVBAudio: Version: 2.0.0
          iSightAudio: Version: 7.7.3
System Software:
          OS X 10.9 (13A603) - Uptime: 0 days 0:21:47
Disk Information:
          TOSHIBA MK2553GSX disk0 : (250.06 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 249.2 GB (131.24 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          OPTIARC DVD RW AD-5960S
USB Information:
          Apple Inc. Built-in iSight
          Apple, Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
          [failed] com.apple.ucupdate.plist
Problem System Launch Agents:
Launch Daemons:
Launch Agents:
          [not loaded] com.google.keystone.agent.plist
          [not loaded] com.hp.messagecenter.launcher.plist
          [not loaded] com.sophos.uiserver.plist
User Launch Agents:
          [not loaded] com.divx.agent.postinstall.plist
          [not loaded] com.facebook.videochat.robertdow.plist
          [not loaded] com.spotify.webhelper.plist
User Login Items:
          None
3rd Party Preference Panes:
          Flash Player
          Growl
          Native Instruments USB Audio
          Perian
Internet Plug-ins:
          Default Browser.plugin
          DirectorShockwave.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          googletalkbrowserplugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          npgtpo3dautoplugin.plugin
          o1dbrowserplugin.plugin
          OfficeLiveBrowserPlugin.plugin
          QuickTime Plugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
          CitrixOnlineWebDeploymentPlugin.plugin
          Move-Media-Player.plugin
Bad Fonts:
          None
Time Machine:
          Skip System Files: NO
          Auto backup: NO
          Time Machine not configured!
Top Processes by CPU:
              31%          Google Chrome
               4%          mds
               2%          WindowServer
               1%          mdworker
               1%          EtreCheck
               0%          hidd
               0%          fontd
               0%          imagent
Top Processes by Memory:
          156 MB             Google Chrome
          139 MB             com.apple.IconServicesAgent
          106 MB             Google Chrome Helper
          90 MB              Finder
          82 MB              Console
          74 MB              com.apple.quicklook.satellite
          53 MB              SystemUIServer
          49 MB              CalendarAgent
          49 MB              com.apple.ShareKitHelper
          49 MB              Dock
Virtual Memory Statistics:
          1011 MB            Free RAM
          1.71 GB            Active RAM
          733 MB             Inactive RAM
          348 MB             Wired RAM
          414 MB             Page-ins
          0 B                Page-outs

Hi Carolyn,
Went through step 1 - macbook froze. Went through the second internet plugins trashing - and it froze. It's almost as if it begins processing super slow at some point and then the cursor goes beach ball and eventually I can't do anything. I did another EtraCheck run when I had it started in normal after I erased the internet plugins and I also have the log files that start exactly when it froze up again. See Below:
EtraCheck
Hardware Information:
            MacBook (13-inch, Aluminum, Late 2008)
            MacBook - model: MacBook5,1
            1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
            4 GB RAM
Video Information:
            NVIDIA GeForce 9400M - VRAM: 256 MB
Audio Plug-ins:
            BluetoothAudioPlugIn: Version: 1.0
            AirPlay: Version: 1.9
            AppleAVBAudio: Version: 2.0.0
            iSightAudio: Version: 7.7.3
System Software:
            OS X 10.9 (13A603) - Uptime: 0 days 0:3:6
Disk Information:
            TOSHIBA MK2553GSX disk0 : (250.06 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 249.2 GB (131.05 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
            OPTIARC DVD RW AD-5960S
USB Information:
            Apple Inc. Built-in iSight
            Apple, Inc. Apple Internal Keyboard / Trackpad
            Apple Computer, Inc. IR Receiver
            Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
            com.sophos.nke.swi            (9.0.53)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
Launch Agents:
            [loaded]            com.google.keystone.agent.plist
            [loaded]            com.hp.messagecenter.launcher.plist
User Launch Agents:
            [loaded]            com.divx.agent.postinstall.plist
            [loaded]            com.facebook.videochat.robertdow.plist
            [loaded]            com.spotify.webhelper.plist
User Login Items:
            None
3rd Party Preference Panes:
            Flash Player
            Growl
            Native Instruments USB Audio
            Perian
Internet Plug-ins:
            DirectorShockwave.plugin
            Flash Player.plugin
            FlashPlayer-10.6.plugin
            iPhotoPhotocast.plugin
            JavaAppletPlugin.plugin
            OfficeLiveBrowserPlugin.plugin
            QuickTime Plugin.plugin
            Silverlight.plugin
User Internet Plug-ins:
            CitrixOnlineWebDeploymentPlugin.plugin
            Move-Media-Player.plugin
Bad Fonts:
            None
Time Machine:
            Skip System Files: NO
            Auto backup: NO
            Time Machine not configured!
Top Processes by CPU:
4%            WindowServer
2%            hidd
1%            EtreCheck
0%            mds_stores
0%            fontd
0%            configd
0%            SystemUIServer
0%            System Events
0%            imagent
Top Processes by Memory:
            119 MB               com.apple.IconServicesAgent
            78 MB                Finder
            53 MB                SystemUIServer
            49 MB                CalendarAgent
            49 MB                com.apple.ShareKitHelper
            45 MB                com.apple.dock.extra
            45 MB                soagent
            45 MB                EtreCheck
            41 MB                NotificationCenter
            41 MB                WindowServer
Virtual Memory Statistics:
            1.78 GB              Free RAM
            1.34 GB              Active RAM
            288 MB               Inactive RAM
            363 MB               Wired RAM
            196 MB               Page-ins
            0 B                  Page-outs
Log Files:
https://www.dropbox.com/s/hbutqg9cxx3vmy5/Most%20Recent%20Mavericks%20Fail.log
Any other advice?

G4 powermac will not boot up nomally unless i boot up in safe mode help ?

My G4 power mac will not boot up when switched on itakes several re boots and somtimes crashes.
Will boot up in safe mode. but this only allows me to use some of the application software i need and not all of them.
Can anyone help I thought it could be the hardisk but why would it boot up in safe mode?

Boot from the Tiger installation disc 1 (hold down 'C' on startup). Don't touch the installer, go to the menu bar and select Disk Utility (I think it's in the Tools menu on Tiger).
In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.). Run Repair Disk.
If problems are reported, run it again until the green message says the disc seems to be OK.
Quit DU, quit the installer and restart.
If DU says there are problems it can't fix, you may need DiskWarrior.
Either way, let us know the results please.
(PS; this is the Intel iMac forum - PPC are next door!)
Message was edited by: noondaywitch

Safari and Mail go mad in Safe Mode - help!

I have a macbook pro, mid-2010, OS X 10.9.5; I use Mavericks. I have lots of space left.
It has been playing up of late, ie, slow and that spinning ball thing appears when waiting for icons to open. I'm not very pc savvy. I have reinstalled 0S X. Repaired permissions. Used Etre and found no red typing after the check. I went into safe mode; I expected something to happen, but it didn't. I just could see 'safe mode' on the top bar thingy. But then I clicked on Safari and as usual it opened in Yahoo UK. The screen went mad! Loading and then unloading lots of lines - it continued to do this. Does not happen on going into Google Chrome. The same mad screen happens when I open Mail, but not as bad. I went into safe mode as i thought it could solve some of the problems I have been having. Do these mad screens mean something? Please help.

You haven't removed the software, at least not completely.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

PXI first use, unable to configure/boot safe mode or RT

Hi all,
I am new to PXI controllers, i am having a few issues with a PXI controller in my university which i intend to use for my fyp project.
So we are using a PXI 1042Q chassis with a PXI 8106 embedded controller.
We started this controller for the first time and updated windows xp, we also removed labview 8.6 that came with it and installed labview 2010 with all the available drivers, softwares and liscenses..
When we start windows XP on the PXI system we can see the PXI chassis and controller identified in MAX but labview cannot find them when creating a project.. My first question concerns the reason why labview cannot identify PXI targets in a project?, could it be a missing liscence (for instance RT liscence for PXI)? or an improperly installed driver? How to check if RT liscence is missing or needed?
Due to the first problem, we tried to control the PXI remotelty from another desktop host PC where we found more problems.
1/ Can we make a connection in order to download a project from the host PC to the PXI via ETHERNET (without MXI cards) ?
2/ We tried to make the connection using ethernet but we couldnt configure the IP; when we switch to safe mode to configure, the pxi gives the following texts on screen " system error kernel 446610 LFS error not a dos disk pc-dskinit " and the system remains unconfigured with the 0.0.0.0 IP due to the failure to boot, MAX on the host PC sees the PXI as a 0.0.0.0 and changing the IP is not possible also.
To cure this issue and help the system boot, we created a desktop PC utility USB Drive in MAX (on the host PC), configured the boot devices priority on PXI and booted the PXI from the USB drive. we entered safe mode and the pxi took an IP automatically and then it displayed that the software is not present... The problem is that when we tried to install the software on the pxi using MAX on the host PC (which now sees the PXI) we got disconnected..
Note that firewall is off, the host pc has an ip in range with the one generated by the pxi, on the same subnet and has windows 7..So why are we loosing the connection in MAX after 30 seconds,, when we try to install the software on the pxi?
thank you in advance for your help.
Elias Saleh.

Dear Elias579,
Welcome you to the NI Forums!
There are basically three ways a PXI system can by characterised by the OS:
Real-Time OS running on the PXI makes it an RT Target, which then can be reached from the network by a host PC for example
"regular" Windows running on the PXI makes it a simple industrial PC, which has no real-time qualities. In this case you cannot add the controller to your project, since you are actually on the target, and whatever VIs you crate are actually on the platform already!
Hybrid systems (not all controllers are compatible with this) can run in such a way that one core runs regular Windows and an other runs an RT OS, which can communicate with each other.
Your problem is either
1.) You installed a simple windows, in which case you wont add any targets to your project since you are running every VIs on the target. The chassis works exactly like a PCIe bus slot extender, so the cards inside are the ones that matter. For example if you have a programmable FPGA PXI card, and you have LABVIEW REAL-TIME and NI-RIO driver installed, you will be able to add the card within the chassis to your project.
2.) You are just missing a driver. Since you do not have an RT OS on the PXI, you might need a suitable DAQmx for you cards.
Please to help me have more vision of your problem try to describe what cards are you using and what is actually you would like to do.
For debugging you issue, these documents might help:
http://digital.ni.com/public.nsf/allkb/24D16468DE8838B2862568E200746D7E
https://decibel.ni.com/content/docs/DOC-16189
**EDIT:
one more thing, if you are using a regular Windows PXI, you should not seek to connect to it as an RT Target. You might try to use Remote Desktop from an another PC though.
Looking forwards to help you solve your issue,
Peter
Peter L.
National Instruments Hungary
Applications Engineer

My Mac Pro 2.8 crashed and will not reboot in Safe Mode - HELP!

Hello
I have a Mac Pro 2.8 and it froze up on me; I held in the power button to shut it down. Upon restart, all I get is a flashing foldoer file icon with a question mark.
What gives? It will not start in Safe Mode, via the Shift button OR DOS command (sudo nvram boot-args="-x")
1. How do I get it back up? I have a back up on my external hard drive, but it doesn't recognize it?
2. Are all my current files gone?
Thanks for your help

A flashing question mark on boot can mean several things. One, your Mac can't find a system folder to boot from or the startup disk is failing or failed.
Since you don't have the install discs now, it may take some time to order and receive them from Apple. Probably time to take the Mac to an Apple Store or Apple certified repair shop. They can tell you for certain whether or not the disk has failed.
Since holding down the Option key that prompts the Startup Manager window didn't work, not does your external drive recognized your Mac, I'm afraid without a backup to restore those files from, you may be out of luck.
can I get a new one from mac, and will it erase all my files?
You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.

I can only use macbook pro in safe mode. Kernel Error

Can anyone help me get my MacBook Pro Mid 2009 15" back to normal?
This is the kernel error that keeps apperaing when I try to restart my mac book. My mac book was restarting originally because i was installing xcode. I am now seroiulsy regretting it.
panic(cpu 0 caller 0xffffff80184dc19e): Kernel trap at 0xffffff7f9927125d, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff8000002020, CR3: 0x000000001b366000, CR4: 0x0000000000000660
RAX: 0xffffff80189a4240, RBX: 0xffffff8025b88400, RCX: 0x0000000001510000, RDX: 0xffffff80230c0cf0
RSP: 0xffffff8092a33e00, RBP: 0xffffff8092a33e30, RSI: 0x0000000000010001, RDI: 0xffffff80230c0cf0
R8: 0x0000000000000000, R9: 0x0000000000000003, R10: 0x0000000000002130, R11: 0x0000000000000003
R12: 0xffffff8018b03490, R13: 0xffffff8018979200, R14: 0xffffff80230c7c00, R15: 0xffffff80230c7c01
RFL: 0x0000000000010206, RIP: 0xffffff7f9927125d, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff8000002020, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8092a33a90 : 0xffffff8018422f69
0xffffff8092a33b10 : 0xffffff80184dc19e
0xffffff8092a33ce0 : 0xffffff80184f3606
0xffffff8092a33d00 : 0xffffff7f9927125d
0xffffff8092a33e30 : 0xffffff7f992711cd
0xffffff8092a33e50 : 0xffffff801889297f
0xffffff8092a33ea0 : 0xffffff801889253f
0xffffff8092a33f30 : 0xffffff801888e119
0xffffff8092a33f70 : 0xffffff8018893093
0xffffff8092a33fb0 : 0xffffff80184d6aa7
      Kernel Extensions in backtrace:
         com.apple.iokit.CHUDKernLib(365.0)[6564ADBD-4AA4-6317-E283-151737D9C2A7]@0xffff ff7f99270000->0xffffff7f99277fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:     0x0000000018200000
Kernel text base: 0xffffff8018400000
System model name: MacBookPro5,3 (Mac-F22587C8)
System uptime in nanoseconds: 53650245973
last loaded kext at 53207973194: com.apple.iokit.IOUserEthernet          1.0.0d1 (addr 0xffffff7f99b32000, size 40960)
loaded kexts:
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
com.apple.driver.AGPM          100.14.11
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.iokit.CHUDUtils          364
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.driver.AppleHDAHardwareConfigDriver          2.5.3fc1
com.apple.iokit.CHUDProf          366
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.GeForceTesla          8.1.8
com.apple.iokit.IOBluetoothUSBDFU          4.2.0f6
com.apple.driver.AppleHDA          2.5.3fc1
com.apple.driver.AppleMikeyDriver          2.5.3fc1
com.apple.driver.AppleBacklight          170.3.5
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.driver.AppleHWAccess          1
com.apple.driver.AppleMuxControl          3.4.12
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleLPC          1.7.0
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.nvidia.NVDAStartup          8.1.8
com.apple.driver.SMCMotionSensor          3.0.4d1
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleUSBTCButtons          240.2
com.apple.driver.AppleUSBTCKeyEventDriver          240.2
com.apple.driver.AppleUSBTCKeyboard          240.2
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.driver.AppleIRController          325.7
com.apple.BootCache          35
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.driver.AppleUSBCardReader          3.3.5
com.apple.iokit.SCSITaskUserClient          3.6.0
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.4.0
com.apple.driver.AppleUSBHub          650.4.4
com.apple.driver.AppleAHCIPort          2.9.5
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleFWOHCI          4.9.9
com.apple.driver.AirPort.Brcm4331          700.20.22
com.apple.driver.AppleUSBEHCI          650.4.1
com.apple.driver.AppleUSBOHCI          650.4.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.nvenet          2.0.21
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleSMBIOS          2.0
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
com.apple.security.quarantine          3
com.apple.nke.applicationfirewall          153
com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
com.apple.iokit.IOSurface          91
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.iokit.IOBluetoothFamily          4.2.0f6
com.apple.AppleGraphicsDeviceControl          3.4.12
com.apple.nvidia.classic.NVDANV50HalTesla          8.1.8
com.apple.nvidia.classic.NVDAResmanTesla          8.1.8
com.apple.driver.DspFuncLib          2.5.3fc1
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAudioFamily          1.9.4fc11
com.apple.kext.OSvKernDSPLib          1.14
com.apple.iokit.CHUDKernLib          365
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.5.3fc1
com.apple.iokit.IOHDAFamily          2.5.3fc1
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.3.6
com.apple.driver.AppleGraphicsControl          3.4.12
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.driver.IOPlatformPluginFamily          5.5.1d27
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.iokit.IOGraphicsFamily          2.3.6
com.apple.driver.AppleSMC          3.1.6d1
com.apple.kext.triggers          1.0
com.apple.driver.AppleUSBMultitouch          240.6
com.apple.iokit.IOUSBHIDDriver          650.4.4
com.apple.iokit.IOUSBMassStorageClass          3.6.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          650.4.0
com.apple.iokit.IOAHCISerialATAPI          2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
com.apple.iokit.IOUSBUserClient          650.4.4
com.apple.driver.AppleEFINVRAM          2.0
com.apple.iokit.IOAHCIFamily          2.6.0
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IO80211Family          600.34
com.apple.iokit.IOUSBFamily          650.4.4
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IONetworkingFamily          3.2
com.apple.driver.NVSMU          2.2.9
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.TMSafetyNet          7
com.apple.security.sandbox          278.10
com.apple.kext.AppleMatch          1.0.0d1
com.apple.iokit.IOReportFamily          21
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.driver.AppleKeyStore          2
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.8
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.pthread          1
com.apple.kec.corecrypto          1.0

grey_nathan,
try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does the kernel error still appear?

Toshiba Satellite Laptop - Will Not Boot, Safe Mode Not Accessible

Hi everyone, thanks in advance for your help.
I am trying to help my mother-in-law (I know, who does that!?) with her laptop. Because of the boot problems, I can only offer you limited info on the specs, but here is what I do know.
Toshiba Satellite
Model Number PSAE6C-TJ908C
2 Gig RAM (assuming DDR2)
HDD is a Toshiba MK2035GSS 200Gig
OS Windows Vista
Bios Version 2.60
Problem:
First it would boot ok in one user account, but when booted in secondary account it would act odd, ie caps lock stayed on when not pressed, etc. Deleted secondary account, ran Windows repair function, now I cannot access the primary account, will not boot in safe mode, can not change boot sequence in setup to boot from cd or run restore disc. I have to use an external keyboard as the laptop keyboards enter key and "a" keys do not work. (New keyboard which was replaced in December, warranty has since run out, thank you Staples.)
Any and all help greatly appreciated. I'll answer any other questions you have as they come up, I realize I may have left out some key details.
I forgot to add a couple of details. When booting, it hangs at the Toshiba screen prompting for either F2 for setup or F12 for boot device selection, when you reach the log in screen it gives a number of odd sounding beeps (3 I believe), the Filter Keys box comes up, and when you try to enter the login password it will not recognize it.

Satellite A200-TJ (9PSAE6C-TJ908C)
will not boot in safe mode, can not change boot sequence in setup to boot from cd or run restore disc.
I have to use an external keyboard as the laptop keyboards enter key and "a" keys do not work.
it hangs at the Toshiba screen prompting for either F2 for setup or F12 for boot device selection, when you reach the log in screen it gives a number of odd sounding beeps
That's one sick laptop. If the thing beeps on startup and even the keyboard doesn't work, I'd figure on replacing it.
Are there important files you need to rescue?
-Jerry

Firefox won't open no error message, tried everything in the help article nothing works. Won't even open in safe mode. help!

When I click on the firefox icon (windows 7) nothing happens. not even in safe mode. Nothing in the help article works. I've tried uninstalling twice.

Hi mcclausky, you may need to manually remove a policy setting from the registry. You also should scan for malware that might have created this problem.
This article lists scanning and cleaning tools other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]].
To check your Windows registry for policy settings that might affect Firefox or other programs, I suggest consulting a Windows forum or Microsoft's forums. For example:
* http://windowssecrets.com/forums/
* [http://answers.microsoft.com/en-us/windows/forum/windows_8-system/this-operation-has-been-cancelled-due-to/9677848e-072d-4206-87f4-9da9284d6151 This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. - Microsoft Community]
* [http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/restrictions-this-operation-has-been-cancelled-due/8af1d0cd-8fbd-4223-9396-86d7497bb275 Restrictions. This operation has been cancelled due to to restrictions in effect on this computer.Please contact your system administrator. - Microsoft Community]

Booting safe mode hangs during fsck_hfs rMBP + 10.8.0

When trying to boot in safe mode (holding down shift while power on) to troubleshoot issues with the upgrade to 10.8.1 the boot process hangs indefinitely.
When switching on verbose and safe mode (nvram boot-args="-x -v") I see that it proceeds until fsck_hfs is run.
The last message from fsck is: "** check catalog"
There is another message probably unrelated after this:
AppleUSBMultitouchDriver: check state - receive state packet payload 2, device was reinitialized.
After this it hangs (waited for hours).
Already did a internet recovery install of the OS and nothing changed.
Normal booting and recovery system booting works without problems.
When I Verify-Disk in Disk-Utility everything is fine.
Can't upgrade to 10.8.1 because there is also problem with the App Store ugrade (doesn't show upgrades)

Bdobs wrote:
No, my problem started while I was trying to upgrade to 10.8.1. After it rebooted following the update, it would not boot back up. I think I am going to have to restore from my backup (out of town right now).
Thats bad, so it looks like in order to update it starts in safe mode, if safe mode doesn't work it can't update anymore!

Safe mode help

I need help with my laptop on safe mode I can't get it off of safe mode

Hi dorothy59, welcome to the HP Forums. To help you solve the issue, where your computer is not exiting safe mode, I need more information. What is the model number of your notebook? What version of Windows is installed? You can refer to the guides below if you need help finding that information.
Guide to finding your product number
Which Windows operating system am I running?
I look forward to your response.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Start Up in Safe Mode: Help Please

Hi,
Have a late 2012 iMac and would like to start it up in safe mode. I have heard that you press the shift key after the chime when you start it up, but have
not had any luck. Can someone advise me as to how to get the computer to start up in safe mode please.
Thanks very much.
Alf

Okay. This all makes sense now. And why the OP originally thought after chimes. He is right. San Lewy, I always thought you couldn't do it through bluetooth as well. From CNET:
If any inputs are being sent via the Bluetooth keyboard before the controllers are active, then they will not be recognized by the system. However, if these inputs are performed after the controllers are activated, then they will be properly read. Therefore, for Bluetooth keyboards, be sure to press the desired key sequences after you hear the boot chimes and not before.
How to manage OS X boot options with wireless keyboards ...

Imac 2011 27" won't boot / safe mode / install disc / bootcamp

I've been having an ongoing problem with my computerwhere it randomly crashes. my first visit with the Apple Store resulted in a replacement of the video card. that only fixed the issue for less than a month. during the second visit they did a full hardware test and deduced that the third party RAM was defective.I was also advised that the OS would need to be reinstalled. when I got the computer back I was able to boot up the system without issues, but before I could back anything up it crashed again. Now I cannot restart the computer past the spinning wheel I get a white screen. I cannot boot the computer into safe mode either. I have the original installation disk but it also hangs after the spinning wheel. I have also tried loading up boot camp and that also hangs after the Windows screen. I was however able to load up Windows in Safe Mode. does anyone know what is going on here?

Try restarting while holding down the Option key. Theoretically, that will prompt the Startup Manager window where you can select the startup disk. If the startup disk is not available, then it's probably time for another trip to the Apple Store.
Did you by chance purchase AppleCare ??

MacBook no boot safe mode help

Similar Messages

Maybe you are looking for