Macbook no longer connects to internet

I recently purchased a used Macbook 1.1 with a fresh install of 10.5 and used it for about a month with no problems whatsoever. About two weeks ago I changed locations (I´m currently traveling around) and the Airport would not connect to the new network. It just says ¨Connection Timeout¨ no matter what I do (ie. type in correct password, unsecure the network, try different networks, etc...). At first, I was able to connect via Ethernet to this router, but about a week ago, that also stopped working. And it´s not just that it won´t connect - it gives me the message ¨The cable for Ethernet is not plugged in.¨ I´ve tried everything I can think of. I´ve reset all routers, reset the PRAM, the SMC, reinstalled the OS... it just doesn´t make any sense to me that suddenly these two different pieces of hardware which both worked fine would both suddenly stop working. I´d take it to a Genius Bar, of course, but I am now in the middle of nowhere in Spain and that´s not really an option so any self help suggestions would be most appreciated... Thanks!

Full bars would just indicate that your MacBook is connected to a wireless network. Typically when a computer can connect to the local network but not the Internet means that it is not configured properly to do so.
What may be missing in your computer's configuration is the proper IP address information.
Go to Preferences > Network > Wi-Fi > Advanced > TCP/IP tab
Configure IPv4 should be set to "Using DHCP," and the IPv4 Address, Subnet Mask, & Router fields should be populated with the appropriate IP addresses for your network.
Go to the DNS tab
There should be one or more DNS servers listed. These are either the ones provided by your ISP or ones that you set up yourself.

Similar Messages

  • Firefox no longer connects to internet on my mac, and windows machines, after v18. I've tried several solutions from Mozilla support and nothing works. Firefox

    Firefox no longer connects to internet on my mac, and windows machines, after v18. I've tried several solutions from Mozilla support and nothing works. Firefox can't even connect to Mozilla for updates. Firefox just sits on the default search page and attempts to connect to websites by typing URLs, or by clicking on the links on the default search page don't work.

    You could try the following:
    * Make sure your Internet security software is up-to-date (i.e. you are running the latest version)
    * Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see Configure firewalls so that Firefox can access the Internet.
    Let us know if this fixed your problem!

  • My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    This can be caused by a number of issues.
    Was everything working and then suddenly stopped??
    Or is this a new clean setup and has never worked.
    Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
    Check the IP the MBP gets including dns and gateway..
    Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

  • HT5642 I get a unable tO download messge when i try to download ios6.1. I need ios612 to fix calendar bug....the message i get says that unable to download because no longer connected to internet....i am connected to the internet all along

    I get a unable tO download messge when i try to download ios6.1. I need ios612 to fix calendar bug....the message i get says that unable to download because no longer connected to internet....i am connected to the internet all along

    1. Try reinstall iLIfe 09 from your install disk
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    For older versions that have been installed from Disk you'll need these additional steps:
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
    If that fails, then you're reinstalling the OS.

  • HT5957 Unable to update. I phone keep getting this msg.   Unable to verify update iOS 7.0.2 failed verification because you are no longer connected to Internet

    Unable to verify update iOS 7.0.2 failed verification  because you are no longer connected to Internet

    I still haven't seen a solution to the problem "unable to verify update iOS 7.0.2 failed verification because you are no longer connected to internet"
    I did not have my iPhone plugged in to power during download, had plenty of power.
    Download burped once and restarted download.
    I got to the Verification step and it failed multiple times.
    I plugged in power, I turned off iPhone and restarted.
    I tried to do the download again and it goes to the Verify step
    and get the same error message.
    I do not have an Apple PC, but, have a Windows 8 PC.
    WIll iTunes help better manage the update?
    rdmayo

  • Macbook can't connect to internet any longer

    I have a Verizon router but all of a sudden I can no longer connect to the internet. Every time I try to connect to the internet it tells me the connection has timed out. I tried the Network Setup Assistant, but it tells me my password is invalid, even though I am positive it's correct. Any suggestions?

    Maybe a call to Verizon? SOunds like it may be on their end
    LN

  • MacBook no longer connects to T.V. after Thunderbolt 1.2 update

    I recieved a 13 inch, mid 2012 MacBook Pro for my birthday on Dec. 20th 2013. A few days later I bought a Nexxtech Mini DisplayPort to HDMI adaptor which was working fantastically for a couple weeks when connecting my MacBook to my Insignia TV. After installing the Thunderbolt 1.2 update, my MacBook and TV no longer connect. The screen on my MacBook will flash for a second like it is detecting the TV, but that's it. I get a "no signal" sign on the TV. I've tried everything I could find on the internet. Resetting the PRAM and SMC, detecting through command + F2, turning off "displays have seperate spaces", and all the little rituals some people have to go through to get it to work. Nothing. I've even tried it on my parents LG TV. Nothing. I'm so ****** off. This was a huge reason I got a MacBook. Seeing that this update came out in May 2013 and people have been having the same issue since then, I'm not hopeful that Apple will be fixing this any time soon.

    I also can't get the media sync to connect after the update. I can get the mass storage to work with no issue, but media sync is having issues.
    Every time I connect with media sync, Windows 7 pops up a message stating that the driver failed to load and to contact Samsung. So I contacted Samsung support, which was completely useless.
    I need the media sync to work because that's the only way I've found to get DRM-protected media files to transfer properly to my Charge. If I copy them to my phone while in mass storage mode, I can't play them because there is a licensing error.
    Any help would be greatly appreciated!

  • AirPort no longer connects to internet but local networking is fine.

    I have an Airport Extreme router version 7.6.3. Recently the router has been dropping connections with my cable modem.  I have had to reboot the modem and the router to reconnect.  It is no longer connecting to the internet at all.  All of my wireless devices can find the Airport and connect to my local WiFi network but no internet access.  I tried connecting my macbook directly to the cable modem via ethernet cable and had some of the fastest internet connections in recent memory.  How do I make the router work?

    mopar408 wrote:
    I did.  They very politely told me - after checking the connection for 15 mintues with me online - that it appeared to be a router issue from thier perspective.  I was wondering if there is some way to test the routers basic functions, etc.
    If you haven't already done so, install 5.6 utility on your Mac..
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
    Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.
    Roll the firmware version back to 7.6.1 or earlier if it will work.. the latest firmware is not the greatest by a long shot.
    Then using 5.6 utility you can access the advanced logs on the Extreme.. you cannot do that with v6 utility.
    It should show disconnections happening.
    You can also access the WAN ethernet settings and set the Airport to 100mbit full duplex.. this seems to have helped people lately.
    Of course nothing like this exists in v6 utility.. being a toy utility.

  • IMac G5 isight Can No longer connect to internet over Airport

    I have an iMac G5 that has been working fine on my Airport Extreme wireless network for 3 years. Suddenly, I can no longer access the internet over my Airport connection. The computer is on my local Airport network wirelessly (I can access it from my laptop and share files). I can connect to the internet from 4 other computers connected to the same wireless Airport network (2 MacBook Pro's, 1 Powermac G4). In addition, if I connect my iMac to my laptop via a twisted pair ethernet cable and turn on internet sharing on my laptop, my iMac can connect to the internet. All systems are running 10.5.5 and no firewalls in place. I checked my internet preferences and they have not been changed from what they were before when it was working. DOES ANYONE HAVE ANY IDEA WHY SUDDENLY IT STOPPED CONNECTING TO THE INTERNET OVER MY WIRELESS AIRPORT CONNECTION?

    I have just experienced the same situation. Everything was working fine and now I can't connect to my airport from my macbook pro. I also have an iMac G5 working perfectly well on the same airport.
    Could it be a latest update that has caused the problem?

  • Resetting Time Capsule - network is OK, but no longer connects to internet

    I've set up my TC in the past and it's worked fine, but periodic printer or router updates have caused problems and I think I need to completely reset it.
    My setup is an ISP-suppled Orange Livebox Mini router connecting to the internet, an iMac plugged in by ethernet (connects to internet OK) and my TC connected to this router by ethernet. My MacBook Pro then connects wirelessly to the TC network. This setup means I don't need to have two wireless networks, I can disable the Livebox router's wireless network and use only the Time Capsule wireless. However, that's not working. I can create a wireless network with my MacBook Pro but the TC is unable to get an internet connection despite being connected by ethernet to the router. I think I need a total reset but even when I do a manual reset by sticking a pin in the tiny button on the back of the TC, when Airport Utility finds the TC to recreate a wireless network, I find the old settings. I feel this is, or should be, simple stuff as I managed to set it up before, but this time it's just not happening. For a long time I thought this was just a problem with wireless settings on my Lexmark printer and waited for the Apple/Lexmark updates to come through, but now I think my TC settings need to be flushed out. One thing that looks odd to me is the IP address on the TC. It's 169.xxx.xxx.xxx, I thought it should be nearer the range specified by the Livebox router, something more like 192.168.x.x
    thanks.

    Oh joy and happiness, I solved it myself, and I owe it to the community to give some details for the benefit of anyone with the same problem searching on terms like Orange Livebox Mini.
    I solved it by racking my brains till inspiration came - that it was a very very well hidden setting on the router itself that was the problem, nothing to do with Time Capsule. I had called Orange to fix this before, but had forgotten that this little setting needs changing from its default every time you reset the router.
    When you have to reset your Orange Livebox router, they more than likely won't ask about your entire setup, they will get one of your computers working by connecting it by ethernet to the primary ethernet port, numbered '1' on the back and with a red stripe next to it. But there are two, number 2 has a yellow coloured stripe and if your main computer, in my case the (desktop) iMac right next to the router goes into ethernet port 1, you will want to connect your Time Capsule into the second, yellow ethernet port. However, that port is not set to work automatically for anything to connect to, it's set up for digital tv. You need to go into your Orange admin page for the router, found by going to 192.168.1.1 on your browser and logging in (remember 'admin' is the magic and default password to get you in. If you have to do a manual reset because you changed and forgot your password, the magic word gets you back in). Once logged in, select 'services' in the menu on the left, then 'digital tv' and then select the 'disable' button. I know, you'd never have found it and never have guessed that's what you need to do to open up the second ethernet, but you now have two ethernet ports into the router and your TC goes into the second work.
    Also wanted to say that my TC has actually been flawless in its performance. Not always easy for simpletons like me to set up, but the hardware has always worked. Printer updates and, I think, Apple OS updates remain a problem as they can throw the printer off, but I must remember to keep my nerve - TC is basically right on, it's just the various different ways to get at it - Network Diagnostics, Airport Utility that confuse me.

  • Can no longer connect to internet on my iTouch

    I have had my iTouch for just over a year and had no problems connecting to the internet at home and elsewhere. I had to purchase a new router recently and now my Touch no longer connects. It finds the network with no problem but when I enter my password it still says "unable to join the network..." It works everywhere else just fine and my laptop at home connects to my wi-fi with no problem as well. I have tried to input my network under "Other networks" with no success either. My settings and password are the same as before but it still won't connect. Has anyone else had this problem and any ideas on how to fix it? I went to the Apple store and they said they had no idea why it no longer connects. Thanks for any help you can send me.

    Are you running WEP encryption? Chances are the new router interprets your password in a form that the touch can't deal with. You can either using the hex code in place of the password you created or reset your encryption to WPA2-psk and create a new 10-12 character password.
    If you don't want to change encryption, you can reconfigure your WEP passwords - 5 characters only with 48bit or 13 characters only with 128 bit.

  • Macbook pro wont connect to internet using cable, but connects using wifi fine

    My macbook pro wont connect to the internet using a cable, but connects using wifi fine.  I use wifi at home but sometimes need to use my laptop at work and connect using a cable but it says i'm not connected to the internet?

    Can you open a terminal and invoke the following commands:
    ping -c 10 localhost
    and
    ping -c 10 google.com
    You should normally get something like:
    PING google.com (74.125.224.103): 56 data bytes
    64 bytes from 74.125.224.103: icmp_seq=0 ttl=55 time=19.053 ms
    64 bytes from 74.125.224.103: icmp_seq=1 ttl=55 time=37.692 ms
    64 bytes from 74.125.224.103: icmp_seq=2 ttl=55 time=46.988 ms
    64 bytes from 74.125.224.103: icmp_seq=3 ttl=55 time=33.466 ms
    64 bytes from 74.125.224.103: icmp_seq=4 ttl=55 time=28.940 ms
    64 bytes from 74.125.224.103: icmp_seq=5 ttl=55 time=58.070 ms
    64 bytes from 74.125.224.103: icmp_seq=6 ttl=55 time=33.335 ms
    64 bytes from 74.125.224.103: icmp_seq=7 ttl=55 time=33.361 ms
    64 bytes from 74.125.224.103: icmp_seq=8 ttl=55 time=36.099 ms
    64 bytes from 74.125.224.103: icmp_seq=9 ttl=55 time=41.111 ms
    --- google.com ping statistics ---
    10 packets transmitted, 10 packets received, 0.0% packet loss
    round-trip min/avg/max/stddev = 19.053/36.811/58.070/9.939 ms

  • My macbook pro cannot connect to internet via wifi

    I have a Macbook Pro 2010 OS X 10.8.3.  I cannot connect to internet via wifi (Air por).  My Macbook Pro does not recognize my network and when I select it from the list of network it asks for my network password.  when I type in my password a dialog box gives me timeout error.  Please could anyone help me.  I am using ethernet for my connection at the moment.  Do I need to reset my macbookpro?  if yes, what will happen to my applications and operating system (mountain lion)?
    Monireh

    When you use the Airport utility what happens?
    What is in the System Preferences control panel for Network settings?
    http://www.apple.com/support/airport - there is a forum just for Airport Community
    Airport Express FAQ
    http://support.apple.com/kb/HT1515
    Wi-Fi Setup Considerations
    Things to consider before you begin
    Start with a plan for the physical layout. Depending on whether you have an existing Wi-Fi network, or if you are using your AirPort Express as a standalone Wi-Fi device, there are several options available for you to choose from.
    When using Ethernet, Cat6 cable is recommended.
    The layout you choose should take into account environmental factors such as physical access, location, range, radio frequency interference, etc.
    You will need to consider what AirPort Utility settings to adopt.
    You will need to know whether you are using an AirPort Express (802.11b/g) or an AirPort Express (802.11a/b/g/n).
    If you will be using more than one Wi-Fi base station, it may be helpful to read the article Extending the range of your wireless network by adding additional Wi-Fi base stations.
    AirPort Discussions
    Discuss your AirPort Base Station, Time Capsule and Wi-Fi questions with fellow community members.
    More
    Direct you to the proper forum for MacBook :
    MacBook Series Forumshttps://discussions.apple.com/community/notebooks?view=discussions
    Mac OS X Forums
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro

  • Ipad no longer connects to internet after using remote app for apple TV

    I can use the Remote app on my Ipad to connect to Itunes library through my apple TV but as soon as I do that, I can no longer connect to the internet on my Ipad.  The network stays connected on my Ipad but no internet.  I have to recycle the router (airport extreme) and power off the Apple TV.  Once I do that I can then connect to the internet again.  I am using a Mac Pro as my desktop with airport extreme as my router.  All software is up to date.  Appreciate any thoughts anyone might have.  Its a pain to use that litte remote for my Apple TV.

    My question: Is it normal for the internet connection to switch from an Apple Network to another network?
    No.
    You are probably connecting to a neighbor's wireless network. Unplug your base station and see if the network remains.

  • HT1414 The latest update 6.1.2 is not verifying on both iPad or iPhone, saying it is no longer connected to Internet. What's going on and how does this fix?

    Went to download latest update on both iPad and iPhone and upon the verification process both "failed to verify" saying they were no longer connected to the Internet.

    yah mine is 3rd generation and it says the same thing. tried testing my Internet connection on my AirPort Extreme it shows no problems. everything else seems to work but I still having delays on my me emails. though my other email sites seem to work ok. looks like the trouble is at apples end.

Maybe you are looking for

  • Oracle RAC 10g on Windows XP Professional

    Hi All, I read many articlaes that we can not install Oracle 10g RAC on Windows xp professional but the problem is I have a laptop where I am installing VMWARE with Unix O/S I can not upgrade my XP to Server edition as I do not have money o buy licen

  • Dear all, why can't i reactivate my iphone after changing the ios

    Dear all, I've upgraded my ios, and since the I'm not able to restart my Iphone. The message is " we are not able to reactivate your I phone, please restart later" Please i need a help, I don't know what to do, Billy

  • Will this video card and power supply work on my computer? HP Pavilion p6213w Desktop PC

    I have a HP Pavilion p6213w Desktop PC, will this video card and power supply work on my computer? Video Card: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=8379339&sku=A455-0760 Power Supply: http://www.tigerdirect.com/a

  • Need a spam killer for the Mail app

    I am very disappointe hwo the Mail app handles spams so I would like to hear suggestions on a Spam Killer app that you have good experience with Junk It boast to tracks messages and keeps score of who offends you the most. That seems to me a nice fea

  • Forwarding to jsp page inside web-inf

    hi everyone, i have a question. i have jsp pages inside web-inf folder and i have welcome page of project(outside web-inf) in pages from where i want to give link to jsp page inside web-inf folder. this project is absed on spring framework. how can i