Macbook not booting up! Hard Disk???

I have a "Week 1" MacBook and today, when I picked it up to surf the net, when I clicked Safari, it just hanged for about 3 minutes. After the 3 mins, I gave up and forced turned off the computer (holding down the pwr button until it's off.) When I tried rebooting...I hear a click, coming from what sounds like the hard drive and it doesn't boot up. All I get is a folder with a question mark on it.
I get the feeling the hard drive crashed but its a 7 month old computer!!! To add insult to injury, I take care of this computer like it's my baby!!! What the heck???
Any thoughts? Anyone else had this problem???
Eric

If there is a clicking coming from the bottom right side as you use the MB, then it is the HD.
Clicking HDs are bad, bad, bad.
It could be a disk corruption, but the clicking makes me think it is the drive itself. The good news is that it would be covered under the standard warranty, but if it id the drive and it needs replacing, Apple will keep that drive and you will lose all the data on it unless you have a backup.

Similar Messages

New MBP i5 does not boot after hard disk swap

Hi there,
I received my new i5 MBP today. After booting it once with the installed HDD to check if it's ok, I exchanged the hard disk for the one in my Late 2008 Macbook Pro. After doing this, my Late 2008 Macbook Pro boots fine with the (new) hard disk from the new i5 MBP, but the i5 MBP does not boot with my old hard disk.
To give you some details:
- I have installed 10.6.3 on the (old) hard disk that's not booting.
- The i5 MBP boots fine from the installation DVD
- Disk utility finds and can read my hard disk, no errors
- PRAM NVRAM reset did not help
- when booting in safe mode, I can see the system stop booting after or while loading Extensions.mkext
My guess is, it tries to boot and load the wrong Extensions for the new system (CPU? GPU?). I have no idea how to fix this.
Any help would be greatly appreciated!

Focx,
Welcome to Apple Discussions.
Inserting the drive from an earlier model MBP will probably not work. The version of the system you have on that HD is designed for earlier hardware so when you put in in your new machine it's going to be recognized. What I'd recommend is re-installing the disk that came with the new machine and of course putting the 2008's disk back in the old machine. Then use Migration Assistant on the new machine and migrate your data from the old machine into the new machine.
This will provide a much more stable system and should work just fine.
Regards,
Roger

Intel Xserve will NOT boot from hard disk drive

I have two Intel Xserves 2.0 QC machines
I have tried to re-install version 10.4.11 OS (don't ask) onto a Hard disk drive that is in a Disk drive caddy and inserted in the machine.
When booting from The installation DVD media
The disk is seen by the "Disk Utility" (the disk is partitioned as GUID boot) and the installation proceeds to the disk.
Once the first pass of the installation is complete and the system reboots, the system shows the folder and ? mark.
If I boot and hold "ALT" key to view all avaialble boot options the Hard Disk Drive does NOT appear as valid boot disk.
It does show, the still inserted Installation DVD.
I CAN boot from an external firewire drive and the Hard disk drive is visible to the OS once logged in.
I have tried different caddy postions (left, middle and right)
I have tried bona fide Apple supplied Disk drives
I have tried various different caddies
I have tried installing Operating System 10.5.* and 10.6.8 server
I have run SMC reset and system reset
But still I cannot boot off from any Hard Disk Drive inserted in a caddy at the front of the system.
Has anyone seen this behaviour?
Is it fixable?
Do I have replace something like the Hard Disk Drive back plane circuit board? Or even the main logic board?
I have now run out of ideas and cannot find any help in discussions or just googling.
ANY help would be very appreciated
Regards
Tony

Antonio Hi !
QC = Quad core or QX as it is written on the "pull out" serial number tab at rear of system
I have 3 late 2006 Intel xserves
On my intial posting I declared 2 were 2.0 machines - when I was trying to be concise
2 of the macines are 2.66 systems and 1 is 2.0 system - all are QX machines
the 2.0 and 1 of the 2.66 will NOT boot from the ADM and disk inside the system - whereas the other 2.66 system will.
I have many different Caddies and these have different product/model number labels
603-9965
603-9545
603-9796
these are marked "intel SATA"
The 80Gb was only one of the drives tested - I have used Seagate 400Gb 750Gb and 1Tb - all of which have been used in systems at one time or another
and as I said the drives ARE visible once the operating system (either installation DVD or external firewire are booted from) - they are just NOT visible when the system is searching for boot media.
Thanks for the guide - I will look through that and continue to try and find an answer

Help reg what formats to be used for my new 4tb mini stack to back up my macbook and 2 external hard disks

Hey Guys,
I need an advice from you experts regarding the different formats to be used to format my New 4 Tb ministack from OWC. I have a Mid 2010 Intel macbook pro with 500gb hard disk using Mountain lion and two external hard disk from Samsung and Iomega 1Tb each. I want to format this ministack into 4 partitions each of 1Tb each.
1) 1 Tb for time machine to back up my macbook pro.
2) 1 Tb of Free space to be used to store extra data using both windows and mac os.
3) 1 Tb for Samsung back up
4) 1 Tb for my Iomega back up
I know that for 1st option i need to format the partition (volume) to Mac os extended (journalled). I need help for others.For the 1 Tb free space, can i use NTFS so that i can use it on my wifes windows laptop and use a third a party application like tuxera NTFS for use on my macbook which i am already using to use my samsung and Iomega Ext HDD.
Also What format is required for these two 1 Tb volumes dedicated for external hard disk backups and how can i back up my external hard disks to these formatted volumes. Do i need to format them to Mac os extended (journalled) as well as i shall be using macbook pro to back up these hard disks.
Which would be the best software to back up these Ext hdd,can i use time machine? or CCC ?
Your help help shall be gretaly appreciated.
Thanks in advance.

Get Disk Warrior that will repair the problems without requiring that you reformat the drive - $99.00 on a bootable CD. Will not work on a FAT formatted drive.
You will need to use Drag and Drop to save your files by copying them from the bad drive to a good one.
To reprep the drive:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Setup did not find any hard disk drive in your computer

I have an old Compaq Presario 7598 Desktop (Windows XP) which I use as a backup machine. Recently when I tried to start it I am getting "Unable to access hard disk,. Operating system not found on any devices". Then when I tried to start with XP Boot Disk (CD), I am getting "Setup did not find any hard disk drive in your computer".
Can someone help me to resolve this issue?
Thanks.

Repeatedly tap the F10 key at boot, you should see information for the hard disk.
Testing the hard drive:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bph05701#N100A0
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Setup did not find any hard disks installed in your computer

OK, I spent about 30 minutes looking for a solution to this and haven't found anything. I'm too lazy to keep looking, and I need to get back to work...
Setup info:
-Mac Pro (Early 2008)
-Dual 3.2Ghz processors
-32GB RAM
-RAID Card with four 1TB drives attached (RAID 5 with two volumes: one Mac OS X 10.5.3 and one Mac OS X Server 10.5.3)
-320GB SATA drive that originally came with the unit in hard drive bay 1, now installed in the 2nd optical drive bay and connected to the 5th internal SATA port. It's partitioned with BootCamp: 32.88GB for Mac OS X 10.5.3 (installed and running, used to create the BootCamp partition) and 264.71GB available for Windows.
Windows install disc:
Took my Windows XP SP1 install disc and used nLite to slipstream SP2 and SP3 and burn a new install disc.
When I boot into the Windows install disc, everything goes fine, until it actually gets to the part where I should be selecting my hard drive (Hit Enter to Install Windows) for installation. Instead , when I hit enter, I get the message that "+Setup did not find any hard disks installed in your computer. blah, blah, blah, hit F3 to restart.+"
I'm assuming this is a SATA issue and that I need to get a SATA driver slipstreamed into my install disc so that the Windows installer will see the SATA drive.
Any suggestions on how to proceed?

Everything I've read says that that won't work because I have the RAID card.
Sounds like I'm out of luck, if BootCamp can't be installed on a SATA drive not connected to one of the original 4 bays.
Also, I'm concerned about taking the RAID drives out (I'd have to take all 4 out or it corrupts the RAID setup when I stick the one back in) then putting them back in and having everything return to an All Good status.
Message was edited by: chadcole26

Can't boot from hard disk or from windows 7 recovery dvd

I have a 970A-G46 motherboard.
I can't boot from hard disk or from a windows 7 recovery dvd.
If I move the hard drive to another PC, it boots fine.
If I put the DVD in another PC's dvd drive, it can be accessed.
This machine will boot from an Ubuntu dvd and I can then access the HD directories and the recovery dvd.
What do I need to do?
Help and thanks

"I can't boot from hard disk or from a windows 7 recovery dvd."
What is that DVD from? Is it from a previous computer of some kind? Same question for HDD and the OS on it.

The storage where the virtual hard disk is located does not support virtual hard disk sharing. (Hyper-v / Windows 10 Enterprise Tech. Preview)

I am attempting to create new virtual machines in Hyper-V on Windows 10 Enterprise Tech. Preview and I am continually getting the error "The storage where the virtual hard disk is located does not support virtual hard disk sharing.". I am not trying
to setup a shared VM or VHD, just a basic VHD.
Does anyone have any suggestions on how to resolve this issue?

This issue is listed in the release notes and currently there is no fix on our side. Have to wait for the next build.
"Known issues in Build 10049
If you have Virtual Machines hosted on your PC running Windows 10, you will want to move to the Slow ring and wait for the next build as this build breaks the ability to run VMs. "
The statement is miss-quoted. It was about Hyper -V. An update KB3053898
was released to fix that
See the blog
Here :
excerpt........notice the statement has been crossed off in the blog.
UPDATE: You cannot enable Hyper-V on this build. If you have Hyper-V already enabled and you upgrade to this build, Hyper-V will continue to work. <del>If you have Virtual Machines hosted in Hyper-V on your PC running Windows 10, you will want to move
to the Slow ring and wait for the next build as this build breaks the ability to run VMs.</del>

Late 2013 Macbook Pro Retina 15' will not boot an external disk from a Mid-2012 MAcbook Pro. What should I do?

In order to simplify moving all my files from the previous mid-2012 macbook pro 15' when moving to my new late-2013 macbook pro, i superdup-ed the full hard-disk to an external ssd. Unfortunatelly the new mac resuses to boot from this external disk (i get the grey disk with a line over it). The external disk works just fine so if I boot the new mac from its internal SSD I can read/write the external disk without problems.
Old OS X is 10.9 as is the OS on the new mac.
What I need to do is to boot the new mac from the external ssd, use the same superduper to copy the external content onto the internal ssd.
How can I solve this issue?

Welcome to Apple Support Communities
If you made a backup of your files with SuperDuper, use Migration Assistant (in /Applications/Utilities) to transfer your files from the external drive > http://pondini.org/OSX/MigrateLion.html It will create a new user account with the transferred files, so you may want to merge both user accounts > https://discussions.apple.com/docs/DOC-5472
The Late 2013 MacBook Pro uses a special OS X Mavericks version which makes OS X compatible with it, and older OS X versions do not work with it. That's the reason why you cannot start up from the external drive created from the Mid 2012 MacBook Pro

Macbook Pro doesn't boot from hard disk

I recently applied an open firmware password to our Macbook Pro.
A co-worker tried to boot via the t-funtion which obviously doesn't work when the open firmware password is active. He forget to contact me so he tried to get it to work using some startup shortcuts. The folowing he had done:
* starting up while holding shift;
* starting up while holding command + option + P + R;
* having the accu out for a while
* starting up while holding shift and let the Mac on for a night
It seems that starting up from the Macintosh HD seems somehow blocked. THe system hangs on the Apple grey splashscreen with the loading icon turning.
I tried the following:
* Tried resetting PRAM using Option + Command + P + R (didn't hear any chimes);
* Trying to reset Open Firmware Password using Option + Command + O + F (nothing happens)
The most promising solution came when holding down the Option key: I got the lock and entered my Open Firmware Password. I was able to boot from the install disc. In the disc utility I verified the hard disk and repaired some permissions. I didn't get error messages. THen I used the startup utility and selected the hard drive as startup disk.
But when I restart the computer, it still hangs on the splash screen. So for now i've run out of ideas.
Message was edited by: StefSOFT
Message was edited by: StefSOFT

With intel Mac they changed to EFI firmware so a lot has changed. From reading this I think if you can get to install disk utilities then why not uncheck +Require password to change Open Firmware settings+ on Firmware Password Utility and that should free up the troubleshooting steps you list above that are blocked. Reinstall of OSX seems logical to attempt. Sadly without further testing could be hardware issue too, need to contact apple authorized service provider in this eventuality. One thing to bear in mind was whether your co-worker altered the firmware in any way, this might invalidate Apple One-Year Limited Warranty, AppleCare Protection Plan, or other AppleCare agreement.

MacBook does not see internal hard disk

Sorry if this is already answered somewhere, but I have searched so many forums that my head is swimming!
My boyfriend connected a new USB drive to his MacBook, formatted the new disk, copied some backup data onto it. At some point, the MacBook hung, so he held down the power key until the MB turned off.
Each time we restart it now, we get the flashing-folder-with-question-mark, and Tiger won't boot.
I have tried almost all of the tips I can find, and was even willing to reinstall OS X, however... the MacBook does not appear to see it's internal hard disk. As such, I cannot perform first aid on the disk via booting to setup DVD, and I cannot reinstall OS X.
If I boot from the OS X install disk, and use Disk Utility, the MB only sees the CD-RW/DVD-RW drive and the install disc. No internal HD ever shows up.
Help! I am at a loss as to how to fix...

Let me guess: you're also experiencing a low clicking noise from the right side of your mac immediately after you turn it on, right? Same thing happened to me and others, in fact there are several threads on this subject already:
http://discussions.apple.com/thread.jspa?threadID=960977&start=0&tstart=0
http://discussions.apple.com/thread.jspa?messageID=5325539&#5325539
My drive was done for, and no data could be saved. I ended up buying a new drive, and now I'm just hoping the same thing doesn't happen again. I'm beginning to get a sense that this problem is occurring on a more frequent level now that the 1st generation macbooks have reached their 1-year birthday, give or take. Let's hope Appel fesses up if it is indeed a design flaw.
Anyway, you most likely need a new drive. I just got a Hitachi Travelstar 250 gb for around 200$US, so they're quite cheap, and VERY easy to install, just 3 screws, slide it in, boot up, run disk utility, erase/format and you're good to go.

Macbook Pro will not load OS and will not boot from Install Disk

When I try to turn on my macbook pro it goes to the gray logo screen with the spinning gear however it does not progress from there and then after several minutes it proceeds to restart itself and the same process repeats itself. I have tried to boot into single user mode with success and have run /sbin/fsck -fy and that has returned that the volume appears to be ok. However, when I hit reboot it returns to the same process of the gray screen and spinning gear to black screen which repeats. When I boot into verbose mode it progresses to AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RXMAXLE 1024, TXMAXLE 768, STMAXLE 3328 then it stalls for several minutes and then it shows continuing
synchronizing disks... Killing processes
then it says some other stuff to fast to read.
When I try to boot from the install disk it will not boot from holding the c key it goes through the same aforementioned cycle. When using option to boot I can see the Disk then when I select it the cycle happens again.
Also I have XP installed and I am able to boot into that successfully. Any help would be greatly appreciated.
Not sure if I left anything out
-bryce

Welcome to Apple Discussions.
Do you have multiple Accounts defined on that system? The last time you successfully were running, did you run from the Account with Administrator privileges?
Do you have another computer from which you could boot and connect the Macbook Pro in Target Disk Mode to take a look at the drive from your working machine? Perhaps you can run Disk Utility from the working machine and point to the hard disk on the failing Macbook Pro.
Message was edited by: Rick Lang

Macbook not booting up so I resorted to Disk Utility...it has been stuck on "updating boot support partitions for the volume as required"

So my Macbook was not booting up so I resorted to using Disk Utility...it has been stuck on "updating boot support partitions for the volume as required" for over two days.
Has anyone else had to wait this long?
I have read that I should leave it until I get another message but I saw this reply on another site....
"Hi everybody, the message: “Updating boot support partitions for the volume as required.“ means: the Disk Utilities is telling you what it is doing: 'Disk Utilities': "(I'm) Updating boot support partitions for the volume as required (& I'm done with it)." So when you see this message, the DS (Disk Utilities) is done & you can close the application"...
Any advice/tips would be greatly appreciated!

Doesn't have to be another MacBook - any Mac with FireWire (400 or 800) will do. FW 400 to 800 adapters or adapter cables should be available from any computer store.
Instructions for FWTDM -
Disconnect all other FireWire devices from both computers before you use FireWire target disk mode. Do not connect any FireWire devices until after you have disconnected the two computers from each other or have stopped using target disk mode.
To use FireWire target disk mode
    1.    Make sure that the target computer is turned off.
    2.    If you are using an Apple portable computer such as a PowerBook or MacBook as the target computer, plug in its AC power adapter.
    3.    Use a FireWire cable to connect the target computer to a host computer. The host computer can be powered on.
    4.    Start up the target computer and immediately press and hold down the T key until the FireWire icon appears. The hard disk of the target computer should become available to the host computer and will likely appear on desktop. (If the target computer is running Mac OS X v10.4 Tiger, you can also open System Preferences, choose Startup Disk, and click Target Disk Mode. Restart the computer and it will start up in Target Disk Mode.)
    5.    When you are finished copying files, locate the target computer's hard disk icon on the desktop of the host computer and drag it to the Trash or choose Eject (or Put Away) from the File menu.
    6.    Press the target computer's power button to turn it off.
    7.    Unplug the FireWire cable.
(extract from http://support.apple.com/kb/HT1661)

Start-up problem with hp pavilion dv6t-7000‏: "Boot Device Not Found. Hard Disk (3F0)" error

I started getting start-up problems with my hp pavilion dv6t-7000‏. It happens intermittently.
The boot error is:
Boot Device Not Found
   Please install an operating system on your hard disk.
   Hard Disk (3F0)
   F2 System Diagnostics
   For more information, please visit: www.hp.com/go/techcenter/startup
Could a faulty BIOS update cause this problem?
Anyone else who may have experienced a similar problem?
I'd appreciate any help about this problem. Thanks.

Hi
Please find the link given below might help you to fix your issue.
Resolve Boot Device not Found Error Message
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

I'm receiving error Boot Device Not Found and Hard disk not exist when I boot up my laptop

I'm receicing the error Boot Device Not Found when i power on my HP G60-235DX laptop. After following HP's recommended troubleshooting steps, I receive error Hard disk not exist. Hmmmm....that's a little concerning. My guess is I need a new hard drive? I have the 17 recovery disks I made when I setup this laptop, however I'm not sure if they will resolve this issue. Any suggestions?

One of 3 things has happened, listed from most likely to least likely
1. Hard drive has died, replace it with one of the same size or larger, then use the HP recovery discs to re-install windows.
2, The motherboard has serious problems. (Replace the notebook)
3. The hard drive cable that connects it to the motherboard has somehow failed, not very likely. (replace the cable)
Replace the hard drive with a new one and use your recovery discs to get Windows back on it.
Here is your service manual, will show you how to replace the hard drive
http://h10032.www1.hp.com/ctg/Manual/c02985882.pdf
Recovery Instructions for Vista
Recovery Instructions for Windows 7

Boot device not found. "Hard disk not exist". windows not booting

Product: HP G72-110SA
OS: Win7
two days ago, I was installing updates on my computer and when it was about to restart, it froze. After waiting for 10 minutes, I had to turn it off by pressing the off button. From then on, the computer turns on but shows a message "Boot device not found".
I have tried all the BIOS tests that I could find on the net for the hard disk, eg: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443465&tmp_task=solveCategory&cc=uk&dlc=en&la...
This gives me a "Hard disk not exist" error. I tried resetting the BIOS, that didn't work. I tried taking out and putting back in the battery, the memory and the hard disk. Still no luck.
I then booted ubuntu from cd on the computer. It works just fine, including the internet etc EXCEPT the HDD is still not detected.
I had some pretty important stuff and no back up, so would appreciate if someone can help me get back the data. If not, even if I know its just a HDD failure and not a motherboard/BIOS problem, it will be a relief as its probably fixable.
Thanks

Hi there ,
Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I would be happy to assist you. As there are many models of HP Notebooks, I would need the model number. (How Do I Find My Model Number or Product Number?) When I went to www.hp.com/go/techcenter/startup, it gave me documentation and troubleshooting steps to follow. One of the documents it provided is called Hard Disk Error Displays before the Computer Starts. NOTE: I recommend at this point you make an immediate backup of all important data and files. Here are instructions on how to Backing Up Your Files (Windows 8). Please follow the troubleshooting steps provided, re-post with the results of the troubleshooting in detail. Thank you.

Macbook not booting up! Hard Disk???

Similar Messages

Maybe you are looking for