Macbook not connecting to ASUS 247H-P monitor. Anyone else have this problem?

At first the monitor was connecting well but now it just tells me that no HDMI signal can be found and keeps on trying to reconnect with my computer.

Hey macbookProblems17,
Thanks for using Apple Support Communities.
Looks like you are having trouble with an external display. This article addresses trouble with external displays.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Have a nice day,
Mario

Similar Messages

My MacBook crashes every time I connect a USB cord to it, anyone else have this problem?

I went to plug in my phone charger to update my music on my iPhone to my MacBook and it shut off. So i tried about 5 more times and each time the laptop crashed when the USB was plugged into the port. Can anyone explain why this is happening??

Hello there Deroched,
It sounds like your MacBook Pro is shutting down unexpectedly when you plug your phone into one of the USB ports. I recommend these troubleshooting steps from the following article, named:
USB and FireWire Quick Assist
Check the software
See if a newer version of software is available for your device if it requires software. Visit the product manufacturer's website.
Try a different port and cable
Connect your device to a different USB or FireWire port on your Mac. If you connected your device to a USB or FireWire hub or to a port on another USB or FireWire device that's connected to your Mac (known as daisy chaining), connect your device directly to a port on your computer. Some devices need to draw power from a USB or FireWire port to work; if you connect a device to a non-powered hub (one that isn't plugged in to a power source) or to a low-power port (such as the one on your USB keyboard), it may not work. If you have another known-good cable, try swapping the cable to see if that works. If it does, you should replace the problematic cable.
Check for device conflicts
Disconnect all USB or FireWire devices (including hubs and extension cables) except for your Apple keyboard and mouse. Then, connect the device in question directly to your computer. If your device works now, there may be a conflict between that device and one of your other USB or FireWire devices. If it doesn't work, go to tip 8. If you do have a conflict, you can determine which devices are affected. Connect your other devices to your Mac, one by one, making sure to test that each device works before making another connection. When you find the device that causes the issue, contact the manufacturer for assistance (check both manufacturers' websites for software updates and additional information).
Quit associated applications
If you're using a particular application that uses the device in question (for example, you're using Image Capture with a USB scanner), try quitting the application and then opening it again.
Try another user account or computer
If you have another Mac available, try connecting your device to that other computer to see if it works. If you don't have another computer available, log in to another user account on your Mac (or create a new user account and log in to it), and test the device again. If the device is working now, there may be a software conflict between the device and something in your original user account.
Check System Profiler for hardware Issues
Open System Profiler (from the Apple menu, choose About This Mac, then click More Info) and then click either USB or FireWire. If you don't see your device listed in the pane, the issue could be with the device itself or your computer's USB or FireWire port. To rule out the port, plug the device into another USB or FireWire port on your Mac and then check System Profiler again (press Command-R to refresh the window). Also try resetting the FireWire bus. If you see your device listed in the pane but it doesn't work, you may want to contact the device's manufacturer for assistance.
Thank you for using Apple Support Communities.
All the very best,
Sterling

I can't open the PDF for the free install since both my emails did not come with a password. Did anyone else have this problem???

I purchased 2 new Macs, 1 a Mac Air 13" loaded and an iMac for my wife. I received 2 sets of emails, one with the code and the other with the PDF. When I tried to install last night, I would open the PDF and it asked for a password. I checked both sets of emails, which Aopple sent me 2 sets 3 days apart, and neither one had anything looking like a password. I called Apple Care and they said that it was on the sheet under the Thank hyou from Apple...NOT! She then said they would resend the emails again and hopefully have the password this time. Has anyone had this issue??????

Apparently it's related to the Firefox plug in.
This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
2. Select to "Options
3. Select "Applications"
4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
5. Open a test PDF. It should open in it's own window now.
Again, not a complete solution but something that'll at least let you scroll with PDFs open.
More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033

I can no longer shoot directly into phaseone software since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck!

My Sennheiser MM550-x connected perfectly with iPhone 4s. It does not connect with iPhone 5s bluetoth. Ayone else with this problem?

My Sennheiser MM550-x connected perfectly with iPhone 4s. It does not connect with iPhone 5s bluetoth. Ayone else with this problem?

Hey araho!
Here is an article for you that will help you troubleshoot this Bluetooth issue:
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Thanks for using the Apple Support Communities. Have a good one!
-Braden

HT204291 my airplay from my MacBook Pro to my tv through my apple tv is fuzzy- it just started being fuzzy about 2 months ago- it used to be clear- anyone else have this problem? How can I fix it?

my airplay from my MacBook Pro to my tv through my apple tv is fuzzy- it just started being fuzzy about 2 months ago- it used to be clear- anyone else have this problem? How can I fix it?

Hi freezebri,
The following steps may resolve your issue:
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Selectbutton will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.
Hope this information helps ...
- Judy

I cannot get scrabble to work on my ipod touch. I've uploaded, deleted, reloaded and nothing seems to work. It asks for a password but will not let me in. Anyone else have this problem?

I cannot get scrabble to work on my ipod touch. It only works on my macbook. I've uploaded, deleted, reloaded and nothing seems to work. It asks for a password but will not let me in. Anyone else have this problem?

Hi BDAqua,
I can go to /System/Library/Frameworks/, but JavaVM.framework/Versions/A/JavaVM does not exist!
Hi Linc,
I have already downloaded that updater, and it says 'A newer version of this package is already installed'

After update to ios 5 iphone 4 not reading SIM........anyone else have this problem?

I updated my iphone 4 to ios 5 and during the setup its telling me my SIM is invalid. Did anyone else have this problem and if yes what was done to correct it?

Same here , even i'm not able to sign in to iMessages all it says is "Could not sidn in.Please check your network connections and try again." the ineternet seems tow ork fine... i've tried turning off / on still no luck

HT1351 the devices is not popping up in our itunes. is anyone else having this problem. can you help me if you have

the devices is not popping up in our itunes. is anyone else having this problem. can you help me if you have the same problem

Try rebooting the computer and restarting the device.
Try a different cable.
In rare cases fluff in the connector port can prevent proper contact with the connectors used to transfer data. An air duster or thin piece of card or plastic can be used to tease out debris if that is the problem.
tt2

My iPhone does not alert every time I receive a text message, only some of the time. Anyone else have this problem?

My iPhone 4S does not alert every single time I receive a text message, only some of the time. The software is all up to date. Anyone else have this problem?

There are a number of different alerts that can be played on the iPhone. Have you turned the mute switch on? That is located on the side of the phone. When it is in the down/on position (the orange is showing) you should not get any sound alerts. Also, it could be an SMS, a voicemail, an email, a 3rd party alert (if you have particiular apps that provide alerts). You would need to check all of those settings, but with the mute switch on you should not get any sound alerts.

Photoshop CS4 does not recognize raw photos taken with newer cameras. Anyone else have this problem?

Photoshop CS4 will not recognize RAW2 photos taken with my new Panasonic Lumix FZ100 camera. This camera is listed in Adobe's 6.2 Camera Raw update for Photoshop CS5 but cannot be loaded in CS4. I paid a lot of money for CS4 and don't want to buy CS5 just because I bought a new camera, but it appears that Adobe no longer updates Camera Raw for CS4 or with newer cameras. When I called the Help Desk to find out if there was some kind of patch I could get to make CS4 compatible with my new camera a gentleman in New Delhi informed me that he couldn't even answer my question until I paid $40 since answering questions about CS4 was a "paid service." I hung up in a rage. Does anyone else have this problem and is there a solution?

This camera is listed in Adobe's 6.2 Camera Raw update for Photoshop CS5 but cannot be loaded in CS4.
Adobe does indeed not update obsolete versions of Camera Raw for new camera types.
And guess what: It’s the camera producers who seem to like to change their raws – so how about spreading some of your indignation their way?
I paid a lot of money for CS4 and don't want to buy CS5 just because I bought a new camera
The upgrade is cheaper than buying the full version.
Anyway, you could try the free DNG Converter which should be able to handle everything the most recent version of Camera Raw can handle.
Edit:
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh&promoid= HTENC

Since day light savings, events are not saving in my calendar. Has anyone else had this problem?, Since day light savings, events are not saving in my calendar. Has anyone else had this problem?

Since day light savings, events are not saving in my calendar. Has anyone else had this problem?, Since day light savings, events are not saving in my calendar. Has anyone else had this problem?

Greetings,
I have not heard of that issue although some people have reported events showing an hour earlier / later (though I haven't seen that personally).
Questions:
What version of the Mac OS are you running (Apple > About this Mac)?
Can you make an event and then it just disappears?
Are you using iCloud / MobileMe / Google / Yahoo / Some other server based calendar?
Try these in order:
Go to Apple Menu > System Preferences > Language & Text > Formats > Region. Region should be set to the country of your choice. Do not have it set to "Custom" as this can have unexpected results in the iCal window.
Go to Apple Menu > System Preferences > Date & Time and make sure the Date and Time are correct and that the correct Time Zone is selected.
If that doesn't resolve the issue:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Go to iCal > Quit iCal
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
--- NOTE: To get to "Home > Library" in Lion: Click anywhere on the desktop and then click on the "Go" menu at the top of the computer screen while holding down the "option" key on the keyboard. You will see "Library" in the menu.
4. Launch iCal and test.
If the issue persists:
1. Go to iCal > Quit iCal
2. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
--- NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
3. Launch iCal and test.
Hope that helps.

My phone doesn't ring when someone is calling, but the sound works otherwise, like the alarm etc. I have tried to fix it in settings but still not working. anyone else have this problem?

my phone doesn't ring when someone is calling, but the sound works otherwise, like the alarm etc. I have tried to fix it in settings but still not working. anyone else have this problem?

Thanks so much but none of that helped. It was driving me crazy because it would back up another external drive. I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
Thank you for your help and replying to this. Guess I made my own issue!

The 'Swipe to Camera app icon' function is not working. I swipe across but the camera app doesn't start up at all. Does anyone else have this problem? Can it be fixed?

The 'Swipe to Camera app icon' function is not working. I swipe across but the camera app doesn't start up at all. Does anyone else have this problem? Can it be fixed?

You don't swipe but actually press, hold and push up.

HT4623 I updated my phone last night now it is not working properly. Does anyone else have this problem? I have a 4S

I updated my phone last night now it is not working properly. Does anyone else have this problem? I have a 4S

Try a hard reset.....
Press and hold the Wake / Sleep button and the Home button at the same time, keep them both pressed until the Apple Logo appears.

Macbook not connecting to ASUS 247H-P monitor. Anyone else have this problem?

Similar Messages

Maybe you are looking for