Macbook not picking up hard drive

My macbook won't pick up its internal hard drive. i have it booted up on a external hard drive. Whats the problume with it?

Does the drive how up in Dsk Utility?

Similar Messages

MacBook not showing external hard drive connected to Air Port Extreme

I have a MacBook 5.2 running Mac OS X Version 10.5.7. I am running a wireless network Air Port Extreme router Version 7.4.2. I have connected a 1 TB Western Digital 10EAVS External hard drive and a printer to the Air Port Extreme router via a USB 2 hub. My MacBook sees and I am able to utilize the printer, but the Western Digital 1 TB External drive does not show up. I can see the 1 TB External drive via the Air Port Application setup, but it is not showing up on my desktop or in Utilities/Disk Utilities. I have connected the External drive directly to the USB port on my MacBook, and the drive showed up on my desktop instantly. I partitioned the External drive into two partitions and ran Time Machine which successfully backed up my MacBook. I then disconnected the External hard drive from my MacBook and reconnected it to another USB port in the hub connected to the Air Port Extreme. Once again, my MacBook does not see the External hard drive. I can see the External hard drive via the Air Port Extreme application right down to the two individual partitions. I even removed the USB hub and plugged the External hard drive directly into the Air Port Extreme router, but my MacBook still did not see the hard drive. I've restored version 7.4 and 7.4.1 on the Air Port Extreme, but it did not help. Does anyone have any insight what settings might need to be changed on my MacBook to allow it to connect to the External hard drive while it is plugged into the Air Port Extreme wireless router?

Do you have an older "dome" style AEBS or the rectangular model? The former will not work with TM. Early versions of the former may not work until you enable them to see a TM drive by doing the following:
Open the Terminal application in your Utilities folder. At the prompt paste the following command and press RETURN:
defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
The drive should now be accessible via TM.

Macbook Not Recognising new Hard Drive.

Hello!
Macbook White 2006 Model. I replaced the original 60GB hard drive in 2008 for a 320GB HardDrive.
The 320GB failed two weeks ago and I have bought a replacement (Samsung HM641JI - 640GB).
When I install the new hard drive and boot using the Snow Leopard install DVD the macbook won't recongise the new hard drive as a location (I've tried new install and back up from time machine).
When I install the original 60GB hard drive the macbook boots no problem. I am using it to post this message.
Any ideas why it won't recognise the new drive?

Hi,
mots likely the new harddisk came preformated for use with Windows or even completely unformated.
In that case you cannot install OSX on it before 'preparing' the harddisk with Disk Utility.
After booting from the OSX install DVD Disk Utility can be found in the 'Utilities' in the Top Menu.
Run Disk Utility
In the left pane of it click on the internal harddisk (not any partitions on that harddisk)
In the right pane click on the Partition-Tab
Set it to one partition
Use 'MacOS Extended (Journaled)' as file system
click on the Options-button and set GPT (GUID Partition Table) as Partition scheme
Start the partitioning.
After that is done quit Disk Utility and you should be able to install OSX on the new harddisk.
Regards
Stefan

MacBook not recognizing external hard drive

After months with no problem, my MacBook Pro is not recognizing my external hard drive (USB3.0) as my time machine backup. Yet, when I enter time machine, the backups appear.

Thank u! it worked
Cheers!

MacBook Not recognising External Hard Drive

Whenever I plugged in my External HD it would show up under devices no problem.
Now it wont show at all.
There drive appears to be spinning. It has its own power source.
System Profiler show this info:
Product ID: 0x0277
Vendor ID: 0x059b (Iomega Corporation)
Version: 0.00
Serial Number: 6F41FFFFFFFF
Speed: Up to 480 Mb/sec
Manufacturer: Iomega
Location ID: 0xfd300000
Current Available (mA): 500
Current Required (mA): 2
Any ideas?

Open Disk Utility with it attached. Does it show up there?
Steve

HT1338 My macbook pro(2010) is not reading the hard drive, but the hard drive works through the USB?

Hi everyone,
My Macbook pro(2010) is not reading the internal Hard Drive. At first I thought it to be a hard drive gone bad, so i bought a new hard drive. My macbook is still not reading the Hard Drive. I am able to use the original hard drive through a external(USB) connection. Also, when the macbook turns, there is a redelling sound. Can anyone offer me any suggestions to what the problem might be?

It sounds like the internal cable connecting the HDD to the logic board is improperly connected or faulty. An appointment at an Apple genius bar might be a good option. The repair should not be too expensive.
Ciao.

Old hard drive broke, Macbook will not recognize new hard drive

Hi,
My Macbook wouldn't boot, hard drive was making an odd sound, only would go to the gray/blue screen with the flashing ? folder. I bought a new hard drive and installed it, used Leopard DVD to boot, went to Disk Utility and the only thing that showed up was the DVD. I tried re-seating the drive and still nothing.
Any Suggestions?

Hey hauebj01 and welcome to the forum -
I know it's a hassle but I've heard of some folks having quite a bit of trouble seating replacement drives. You might try that again. Sometimes you have to push harder than you think you should. Make sure that nothing is obstructing the connection.
Also, the drive may be bad. If you have an external enclosure, you can see if you get the same result with it in there.
By the way, which HDD did you purchase?
-GDF

I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. suggestions to complete backup please?

I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. the same thing happens when just trying to save my pictures from iphoto to a flash drive. suggestions to complete backup please?

Sounds like you'll need to access that drive while it is not booted. You need to replace it anyway, so do that, then one way or another (ext enclusure, et), access it and copy files.
If you keep trying to boot it, you might kill it for good and not get your files, so just swap it out first.

File transfer from MacBook Pro into external hard drive

I can't copy files from the MacBook into an external hard drive.
In the 'Get Info' section, it says read-only. However, the hard drive have just been recently bought.
I had the same problem with our previous hard drive. Although the previous hard drive was 'read-only' I was able to copy and paste files in our old HP laptop.
What can I do in order to copy and paste files from the MacBook into the hard drive?
Hard drive = Toshiba
Capacity = 1TB

In my last paragraph, I said
"Note that Windows PCs cannot write natively to an HFS drive, so if you need to exchange files between Mac and PC, we need to talk about different options."
Windows cannot read Mac Extended (HFS) formatted drives; the Mac cannot write to Windows (NTFS) formatted drives.
The only formats fully compatible between Mac and PC are FAT32 (largely deprecated) and exFAT. If you need full read-write compatibility between Windows and Mac, and you can erase the drive (ie, it's a new drive or you have confirmed backups), reformat to exFAT using Disk Utility.
If you have a drive with files on it and you cannot erase them at the moment:
- if the drive is formatted for the Mac, you can purchase MacDrive for the PC
- if the drive is formatted for Windows (NTFS), you can purchase Paragon NTFS for the Mac.
Matt

MacBook pro 13" 2010 hard drive died in less than 2 months, what to do

Hey apple forums, ran into issues today and I want to know how to handle the situation. I bought a MacBook pro 13" (2010) model on may 1st 2010, it died 9 days latter, best buy replaced it free of charge (even though I had to fight them to do so) this next one ran fine from may 9th 2010 to June 22 2010, just shy of two months. What happened? The **** hard drive died (which by the way is a crappy seagate, I only buy western digital drives as they have NEVER failed me in the 10 years I have used them). The way i know this is because I am a pc repair technician and have run diagnostics and they all say drive is dead. When boot up (or attempt) the apple logo pops up and shows a progress bar (which I have never seen before) it stays on for 10 seconds and then disappears, then the normal circle loading animation begins, then my MacBook pro starts getting ridiculously hot and never loads up Mac os x 10.6.4. I am then forced to hold the power button for 10 seconds to kill the power. I can boot into windows 7 which tells me that it is strongly recommended to perform a disk check which hangs midway, or if I cancel it before it starts I can boot in to a working copy of windows 7. If I access or attach a external hard drive I get a blue screen that says "applehfs.dll" is the cause of the blue screen.
I did force boot the Mac os x install DVD and used the disk utility to first verify permissions and it came up with god knows how many errors, but won't let me repair permissions (it is grey out). So I proceed to do a disk volume check, it stops and says it is strongly recommended to backup as many files as possible and reformat the hard drive. I do have the equipment to recover data, however my concern is getting the hard drive replaced under warranty. Being a it support personnel I need my computer asap, it isn't my problem that the hard drive died so I am not going to just buy a new one, how does apple go about replacing NOT repairing the hard drive.
This is what I want, go to the apple store with my Macbook pro and my craftsman set of #000 screw drivers and take the hard drive out myself, hand the hard drive to the "genius" (which by the way are un qualified in my opinion to service my $1200 Macbook pro, as they scratched my first MacBook pro, and stripped the screws. Sorry Apple but you lost my trust). Have the genius hand me a replacement hard drive, I place that back into my MacBook pro and be on my merry way home to reinstall all of my programs and restore my data.
Is this a reasonable request and do you think apple will give me a hard time?
Thanks to all the help,
Jakthebomb

No, that isn't a reasonable request, and it's not going to happen that way. If you want Apple to warrant your new drive, Apple will insist on installing it. If you want to choose your new hard drive, you'll have to buy and install it at your own expense. Given your impatience, your prejudices, and your low opinion of Apple service, that's certainly what you should do. In addition to getting your preferred drive and installing it on your own schedule, you'll get a much longer warranty than Apple would give you on it, and you'll get to keep the old drive to recover data from it if necessary (Apple would keep it if they replaced it.) Installing a new drive yourself will have no effect on the Apple warranty covering the rest of the machine, and being an IT professional, you can probably buy a new hard drive for even less than we ordinary mortals pay for them nowadays.
So yes, Apple owes you a new drive, but if you can't accept the terms on which Apple will provide it, by all means just buy and install one yourself and get on with your life.

Is it possible to install windows 7 on my macbook from a removable hard drive using boot camp? How would I do this?

Is it possible to install windows 7 on my macbook from a removable hard drive using boot camp?
How would I do this?

If you have Lion installed, and run Boot Camp, it will create the boot flash for you, just followe the tutorial on screen. As far as I remember, this was not possible prior to Lion.

Problem with saving from white Macbook to Iomega external hard drive

I'm sorry if this question has been asked before but i cannot find any thread, so i apologise in advance!
I recently have bought a white macbook, but i have a Iomega external hard drive 250GB (which is not full and nowhere near full)I able to move songs and photos over to iTunes and save on my iPhone okay with no problem. The problem arises when i want to do it the other way, I basically want to save documents, songs and pictures on my macbook over to the external hard drive.
The icon for the external hard drive appears and everything works. I was suggested to use iTunes > preference > advanced and change the location to my hard drive. I have tried this and all it does it make an additional copy on iTunes not on the hard drive.
I would be grateful if someone could please help me as i do not have a clue!
Thanks
Gemma

My guess is that the external drive is formatted for windows (NTFS) and for the Mac it would be read only. You can't write to the disk unless you use a third party application like [NTFS-3G|http://www.macupdate.com/info.php/id/24481/ntfs-3g].
If you're only going to use the drive with your Mac, I suggest reformmating it for Mac (Mac Extended (Journaled)) using Disk Utility. This process will erase the drive so if there's any more stuff that you need, reclaim that first.

On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Power on the computer and insert the DVD immediately.
Hold down the 'C' key to boot from the Snow Leopard DVD.
http://support.apple.com/kb/ht1533
After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
You'll likely need to partition and format the new drive before it's recognized.
http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
(Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.)

I just replaced the hard drive on my macbook pro, reformatted new hard drive and copied over a backup from time machine now I have a kernel panic message (you must restart) - what do I do now?

i just replaced the hard drive on my macbook pro, reformatted new hard drive, installed a back up from time machine and now have kernel panic ( you must restart your computer) what do I need to do?

If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents – the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.

How do i copy files from my macbook pro to my hard drive? These files were previously started on my old dell.

how do i copy files from my macbook pro to my hard drive? These files were previously started on my old dell.

More then likely that external drive is formatted the Windows NTFS format which Mac OS X can Read but it can not Write to that format. So you would need to copy all the data off that drive, to either a Windows PC or to your Mac, thenn use the Mac to format it for the Mac OS. Which would be Mac Extended (Journaled) with a Partition Table of GUID.
If you want to use that drive on both Mac and PC then you would need to format it either FAT32 or exFAT.

Macbook not picking up hard drive

Similar Messages

Maybe you are looking for