MacBook not reading the data on my harddrive now?

So I have a Lacie 80 gig harddrive that I have been able to read before but for some reason it won't now. It shows that there is data on there but it won't show the folders. It does read my WD Passport and it's contents. I have all of my 60 gigs of music on the Lacie and was about to convert all the WMA's and put them on the WD but now I might be out of luck. Does anybody have any ideas?

hi
format it with a pc in msdos mod
regards

Similar Messages

PCI6534 not reading the data correctly

Hi,
I am using PCI6534 to read the digital data from out of ADC. I am using port 2 as the input port and PFI3 as the external trigger ( given to the clock of the ADC). I am not able read the data properly ( missing the first few bits of data).

Hi,
I am using PCI6534 to read the digital data from out of ADC. I am using port 2 as the input port and PFI3 as the external trigger ( given to the clock of the ADC). I am not able read the data properly ( missing the first few bits of data).

Profit Center is not reading the data...

hi all,
When I assigned each Cost center with a profit center and posted costs through in FB50 to cost centers and was trying to check the data in KE5Z, system displaying the message that 'No data Read'.....
Why it is soo..
Thank you..
Suresh

Hi Karhik,
Thank you for that Trans Code... thers it is working...
but why not in KE5Z ?? I was specifying there doc no...
Anywys.. Thank you Karthik..
Byee.. Suresh
Message was edited by:
Suresh Kumar

File Adapter fixed length Native format Builder schema not reading the data as expected

Hi
We are using a File Adapter for reading a fixed length data. Using the schema we are able to read the file but the places are incorrect. Following is the schema that we used and the payload.
At the last you can find our expected read of data how it should be.
With out the record type code we are not even reading the file. Hope there should be a correction in the schema. Please suggest
Schema that we are using:
<?xml version= '1.0' encoding= 'UTF-8' ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
     xmlns:tns="http://xmlns.energy.com/CreateReturnedItemGENVNDRPReqABCSImplFileAdapterReadReturnedItem"
     targetNamespace="http://xmlns.energy.com/CreateReturnedItemGENVNDRPReqABCSImplFileAdapterReadReturnedItem"
     elementFormDefault="qualified" attributeFormDefault="unqualified" nxsd:version="NXSD" nxsd:stream="chars"
     nxsd:encoding="US-ASCII">
    <xsd:element name="GENVNDRReturnedItem">
        <xsd:complexType>
            <xsd:sequence minOccurs="1" maxOccurs="unbounded" nxsd:choiceCondition="fixedLength" nxsd:length="1">
                <xsd:element name="HeaderRec" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:startsWith="1">
                    <xsd:complexType>
                        <xsd:sequence>
                            <xsd:element name="RecordTypeCode" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="1" nxsd:padStyle="tail"/>
                            <xsd:element name="PriorityCode" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="2" nxsd:padStyle="tail"/>
                            <xsd:element name="ImmediateDstn" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="10" nxsd:padStyle="tail"/>
                            <xsd:element name="ImmediateOrgin" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="10" nxsd:padStyle="tail"/>
                            <xsd:element name="FileCrDt" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="6" nxsd:padStyle="tail"/>
                            <xsd:element name="FileCrTm" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="4" nxsd:padStyle="tail"/>
                            <xsd:element name="FileIdMdfr" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="1" nxsd:padStyle="tail"/>
                            <xsd:element name="RecSize" type="xsd:string" nxsd:style="fixedLength" nxsd:length="3"
                                 nxsd:padStyle="tail"/>
                            <xsd:element name="BlockingFctr" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="2" nxsd:padStyle="tail"/>
                            <xsd:element name="FormatCd" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="1" nxsd:padStyle="tail"/>
                            <xsd:element name="ImmediateDstnNm" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="23" nxsd:padStyle="tail"/>
                            <xsd:element name="ImmediateOrginNm" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="23" nxsd:padStyle="tail"/>
                            <xsd:element name="RefCd" type="xsd:string" nxsd:style="fixedLength" nxsd:length="8"
                                 nxsd:padStyle="tail"/>
                        </xsd:sequence>
                    </xsd:complexType>
                </xsd:element>
                <xsd:element name="BatchHdrRec" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:startsWith="5">
                    <xsd:complexType>
                        <xsd:sequence>
                            <xsd:element name="RecordTypeCode" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="1" nxsd:padStyle="tail"/>
                            <xsd:element name="ServClsCode" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="3" nxsd:padStyle="tail"/>
                            <xsd:element name="CmpnyName" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="16" nxsd:padStyle="tail"/>
                            <xsd:element name="CmpnyDiscretionaryData" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="20" nxsd:padStyle="tail"/>
                            <xsd:element name="CmpnyIdfn" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="10" nxsd:padStyle="tail"/>
                            <xsd:element name="StdClsCode" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="3" nxsd:padStyle="tail"/>
                            <xsd:element name="CmpnyEntryDesc" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="10" nxsd:padStyle="tail"/>
                            <xsd:element name="CmpnyDescDate" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="6" nxsd:padStyle="tail"/>
                            <xsd:element name="EffEntryDate" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="6" nxsd:padStyle="tail"/>
                            <xsd:element name="SettlementDate" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="3" nxsd:padStyle="tail"/>
                            <xsd:element name="OrgntrStatusCode" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="1" nxsd:padStyle="tail"/>
                            <xsd:element name="OrgntrBatchCode" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="15" nxsd:padStyle="tail"/>
                        </xsd:sequence>
                    </xsd:complexType>
                </xsd:element>
                <xsd:element name="FileControlRec" nxsd:style="terminated" nxsd:terminatedBy="${eol}"
                     nxsd:startsWith="9">
                    <xsd:complexType>
                        <xsd:sequence>
                            <xsd:element name="RecordTypeCode" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="1" nxsd:padStyle="tail"/>
                            <xsd:element name="BatchCnt" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="6" nxsd:padStyle="tail"/>
                            <xsd:element name="BlockCnt" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="6" nxsd:padStyle="tail"/>
                            <xsd:element name="EntryAddendaCnt" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="8" nxsd:padStyle="tail"/>
                            <xsd:element name="EntryHash" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="10" nxsd:padStyle="tail"/>
                            <xsd:element name="TtlDbtEntryDlrAmt" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="12" nxsd:padStyle="tail"/>
                            <xsd:element name="TtlCrdtEntryDlrAmt" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="12" nxsd:padStyle="tail"/>
                            <xsd:element name="Reserved" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="39" nxsd:padStyle="tail"/>
                        </xsd:sequence>
                    </xsd:complexType>
                </xsd:element>
            </xsd:sequence>
        </xsd:complexType>
    </xsd:element>
</xsd:schema>
Sample data:
1011390714890 0910000191406110449A094101MCSCLDA_TESTIN
XPLLS KNRGO CNNK
5200MCSCLDA_TESTIN e-Bill
2390714890TELe-Bill
1406100001091000017000001
6262759774891010000074743
0000033793102651-013 U HOLBACH KARLA & JAMES   1091000013925011
799R01091000013925011
27597748
091000010000001
820000000200275977480000000337930000000000002390714890
091000010000001
9000060000025000001200995048661000001265867000000000000
Read File receive Activity:
<GENVNDRReturnedItem>
<HeaderRec>
    <RecordTypeCode>0</RecordTypeCode>
    <PriorityCode>11</PriorityCode>
    <ImmediateDstn>390714890</ImmediateDstn>
    <ImmediateOrgin>0910000191</ImmediateOrgin>
    <FileCrDt>406110</FileCrDt>
    <FileCrTm>449A</FileCrTm>
    <FileIdMdfr>0</FileIdMdfr>
    <RecSize>941</RecSize>
    <BlockingFctr>01</BlockingFctr>
    <FormatCd>M</FormatCd>
    <ImmediateDstnNm>CSCLDA_TESTIN X</ImmediateDstnNm>
    <ImmediateOrginNm>PLLS KNRGO CNNK</ImmediateOrginNm>
    <RefCd></RefCd>
</HeaderRec>
<BatchHdrRec>
    <RecordTypeCode>2</RecordTypeCode>
    <ServClsCode>00M</ServClsCode>
    <CmpnyName>CSCLDA_TESTIN e</CmpnyName>
    <CmpnyDiscretionaryData>-Bill 2</CmpnyDiscretionaryData>
    <CmpnyIdfn>390714890T</CmpnyIdfn>
    <StdClsCode>ELe</StdClsCode>
    <CmpnyEntryDesc>-Bill</CmpnyEntryDesc>
    <CmpnyDescDate>1</CmpnyDescDate>
    <EffEntryDate>406100</EffEntryDate>
    <SettlementDate>001</SettlementDate>
    <OrgntrStatusCode>0</OrgntrStatusCode>
    <OrgntrBatchCode>91000017000001</OrgntrBatchCode>
</BatchHdrRec>
<FileControlRec>
    <RecordTypeCode>0</RecordTypeCode>
    <BatchCnt>000600</BatchCnt>
    <BlockCnt>000250</BlockCnt>
    <EntryAddendaCnt>00001200</EntryAddendaCnt>
    <EntryHash>9950486610</EntryHash>
    <TtlDbtEntryDlrAmt>000012658670</TtlDbtEntryDlrAmt>
    <TtlCrdtEntryDlrAmt>00000000000</TtlCrdtEntryDlrAmt>
    <Reserved></Reserved>
</FileControlRec>
</GENVNDRReturnedItem>
Expected Read data how we are looking:
<GENVNDRReturnedItem>
<HeaderRec>
    <RecordTypeCode>0</RecordTypeCode>
    <PriorityCode>11</PriorityCode>
    <ImmediateDstn>39071489</ImmediateDstn>
    <ImmediateOrgin>0091000019</ImmediateOrgin>
    <FileCrDt>140611</FileCrDt>
    <FileCrTm>0449</FileCrTm>
    <FileIdMdfr>A</FileIdMdfr>
    <RecSize>094</RecSize>
    <BlockingFctr>10</BlockingFctr>
    <FormatCd>1</FormatCd>
    <ImmediateDstnNm>MCSCLDA_TESTIN</ImmediateDstnNm>
    <ImmediateOrginNm>XPLLS KNRGO CNNK</ImmediateOrginNm>
    <RefCd/>
</HeaderRec>
<BatchHdrRec>
    <RecordTypeCode>2</RecordTypeCode>
    <ServClsCode>200</ServClsCode>
    <CmpnyName>MCSCLDA_TESTIN</CmpnyName>
    <CmpnyDiscretionaryData>e-Bill</CmpnyDiscretionaryData>
    <CmpnyIdfn>2390714890</CmpnyIdfn>
    <StdClsCode>TEL</StdClsCode>
    <CmpnyEntryDesc>e-Bill</CmpnyEntryDesc>
    <CmpnyDescDate/>
    <EffEntryDate>140610</EffEntryDate>
    <SettlementDate>000</SettlementDate>
    <OrgntrStatusCode>1</OrgntrStatusCode>
    <OrgntrBatchCode>091000017000001</OrgntrBatchCode>
</BatchHdrRec>
<FileControlRec>
    <RecordTypeCode>0</RecordTypeCode>
    <BatchCnt>000060</BatchCnt>
    <BlockCnt>000025</BlockCnt>
    <EntryAddendaCnt>00000120</EntryAddendaCnt>
    <EntryHash>0995048661</EntryHash>
    <TtlDbtEntryDlrAmt>000001265867</TtlDbtEntryDlrAmt>
    <TtlCrdtEntryDlrAmt>000000000000</TtlCrdtEntryDlrAmt>
    <Reserved/>
</FileControlRec>
</GENVNDRReturnedItem>

at step 8 of 9 of the file adapter wizard, the icon appears as a cog, on the right, with caption "define schema for native format".
I have JDev 11..1.1.3.0
The problem might be with the version of the SOA extensions you have installed....

RFC not Reading the data's all time.......

Hi all,
I am sending the delivery information from sap to b2b , through rfc, When i do the test run for this RFC i took data's sometime and the next time it is not taking any data, Casn you explain me.

Hi Karhik,
Thank you for that Trans Code... thers it is working...
but why not in KE5Z ?? I was specifying there doc no...
Anywys.. Thank you Karthik..
Byee.. Suresh
Message was edited by:
Suresh Kumar

RFC -Not reading the data all time

Hi all,
I am sending the delivery information from sap to b2b , through rfc, When i do the test run for this RFC i took data's sometime and the next time it is not taking any data, Casn you explain me.

Hi,
For this issue,I would like to know if we can access or see the file in the DVD.
Did you receive the error message？
I suggest you check the Device Manager to see if the device is marked with a yellow exclamation point.
Meanwhile,please use the CD/DVD troubleshooter tool ,which can automatically find and fix some problems with CD/DVD.
http://go.microsoft.com/?linkid=9840807
Hope this helps.
Regards,
Kelvin hsu
TechNet Community Support

Who worked with ICS' Model 4896 GPIB? I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

Hello. Most of the engineers in developer exchange are more familiar
with NI products. Contacting ICS for technical support is a better
course of action.

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt ‏2 KB
read_array.vi ‏21 KB

The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

My up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

my up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

No need to worry about the disk version. You would just have to install an update anyway as soon as it was installed. Download from the link provided below and use the serial number you have to activate.
Product updates

HT1338 My macbook pro(2010) is not reading the hard drive, but the hard drive works through the USB?

Hi everyone,
My Macbook pro(2010) is not reading the internal Hard Drive. At first I thought it to be a hard drive gone bad, so i bought a new hard drive. My macbook is still not reading the Hard Drive. I am able to use the original hard drive through a external(USB) connection. Also, when the macbook turns, there is a redelling sound. Can anyone offer me any suggestions to what the problem might be?

It sounds like the internal cable connecting the HDD to the logic board is improperly connected or faulty. An appointment at an Apple genius bar might be a good option. The repair should not be too expensive.
Ciao.

Strange scenario,Oracle can not display the data in mysql correctly

I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
-------mysql------------
mysql> create table tst(id int,name varchar(10));
Query OK, 0 rows affected (0.00 sec)
mysql> insert into tst values(1,'a');
Query OK, 1 row affected (0.00 sec)
mysql> select * from tst;
------------+
| id | name |
------------+
| 1 | a |
------------+
1 row in set (0.00 sec)
mysql> show create table tst\G
*************************** 1. row ***************************
Table: tst
Create Table: CREATE TABLE `tst` (
`id` int(11) DEFAULT NULL,
`name` varchar(10) DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
-------------oracle ------------------
SQL> select count(*) from "tst"@mysql;
COUNT(*)
49
SQL> select * from "tst"@mysql;
id
1
SQL> desc "tst"@mysql;
Name Null? Type
id NUMBER(10)

You can make the following query on the result page:
"select * from the_table where movietitle = ? and cinema = ?"
then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
Below is the sample code, it assumes you have a connection to the database:
PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
stat.setString(1, usersMovieTitleSelection);
stat.setString(2, usersCinemaSelection);
ResultSet res = stat.executeQuery();
if (res.next()) {
out.print("The movie is available");
} else {
out.print("The movie is not available");
}Now just add that to your JSP page. Enjoy ! =)

" Can not interpret the data in file " error while uploading the data in DB

Dear All ,
After running the below report I am getting the " Can not interpret the data in file " error.
Need to upload the data in DB through excel or .txt file.
Kindly advise to resolve the issue.
REPORT ZTEST_4.
data : it like ZPRINT_LOC occurs 0 with header line,
FILETABLE type table of FILE_TABLE,
wa_filetable like line of filetable,
wa_filename type string,
rc type i.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
CHANGING
FILE_TABLE = filetable
RC = rc.
IF SY-SUBRC = 0.
read table filetable into wa_filetable index 1.
move wa_filetable-FILENAME to wa_filename.
Else.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = wa_filename
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = it.
IF SY-SUBRC = 0.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
insert ZPRINT_LOC from table it.
if sy-subrc = 0.
commit work.
else.
rollback work.
endif.
Regards
Machindra Patade
Edited by: Machindra Patade on Apr 9, 2010 1:34 PM

Dear dedeepya reddy,
Not able to upload the excel but have sucess to upload the .csv file to db through the below code. Thanks for your advise.
REPORT ZTEST_3.
         internal table declaration
DATA: itab TYPE STANDARD TABLE OF ZPRINT_LOC,
      wa LIKE LINE OF itab,
      wa1 like line of itab.
                   variable declaration
DATA: v_excel_string(2000) TYPE c,
       v_file LIKE v_excel_string VALUE    'C:\Documents and Settings\devadm\Desktop\test.csv', " name of the file
        delimiter TYPE c VALUE ' '.         " delimiter with default value space
     read the file from the application server
OPEN DATASET v_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
write:/ 'error opening file'.
ELSE.
    WHILE ( sy-subrc EQ 0 ).
      READ DATASET v_file INTO wa.
      IF NOT wa IS INITIAL.
        append wa TO itab.
      ENDIF.
      CLEAR wa.
    ENDWHILE.
ENDIF.
CLOSE DATASET v_file.
EXEC SQL.
     TRUNCATE TABLE "ZPRINT_LOC"
ENDEXEC.
*------display the data from the internal table
LOOP AT itab into wa1.
WRITE:/ wa1-mandt,wa1-zloc_code,wa1-zloc_desc,wa1-zloc,wa1-zstate.
ENDLOOP.
insert ZPRINT_LOC from table itab.

Final user's can not see the data due to limited authorization.

We have created a InfoSet with three info Objects, 0Account, 0Costcenter and 0COMP_CODE. 0Costcenter have an attribute retail location 0RT_LOCATIO.
0RT_LOCATIO is an authorization relevant object. We as consultants can execute the infoset properly, but final user's with limited authorizations can not see the data because of authorization failier
We hae several options to solve the issue, deleselect the auth. flag in the infoobject; delete the infoobject from the attributes of the cost center or create an authorization object and assign it to the final user's profile. But we don't want to go that way.
My question is, is there any way to avoid including this attribute in the infoset definition? We are not using it in the query and we don't need it, so if we could delete it from the infoset (in the same way you add or delete infoobjects from an Infocube) without changing the cost center aster data, we will have our problem solved.
Does anyone how to do this (if possible)?
Thanks in advance!

Just do two things to find the authorization check failed for that user.
1. Execute SU53 output and find out the authoirzation check failed. If yes, please send that to BASIS Team.
2. Next one, switch on the authorization trace in ST01 and ask that user to see that data. if the user is failed with authorization issue. switch off the trace in ST01 and find out the issue.
Do this way, if it is not successful you can go for any other alternate way.
Hope this would help you.

Fire Fox sent not all the data in text form. Reached only piece of information. Where can I find the cache of sent text?

Fire Fox sent not all the data in text form. Reached only piece of information. Where can I find the cache sent the text?
For example, I posted an article on a news site, but found that only a small part of my article was posted.

I'm not sure whether Firefox saved that information. There is a chance that it is in the session history file, especially if you haven't closed that tab yet. To check that:
Open your currently active Firefox settings folder (AKA your Firefox profile folder) using
Help > Troubleshooting Information > "Show Folder" button
Find all files starting with the name sessionstore and copy them to a safe working location (e.g., your documents folder). In order to read a .js file, it is useful to rename it to a .txt file. Or you could drag it to Wordpad or your favorite word processing software.
The script will look somewhat like gibberish, but if you search for a word in your article that doesn't normally appear in web pages, you may be able to find your data.
Any luck?
For the future, you might want to consider this add-on, although I don't know how long it saves data after you submit a form: [https://addons.mozilla.org/en-US/firefox/addon/lazarus-form-recovery/].

Error: 'BP category 1 does not fit the data in category 2'

Hi,
            i have written a program to create a contact person and the code for it is pasted below...when i run this program i get nothing but this message in the status bar 'BP category 1 does not fit the data in category 2'...can someone tell me wht the error means and y it is coming.
thanks:)
pushpa
*table for storing the line by line records in the excel file
TYPES: BEGIN OF TTAB,
        REC(1000) TYPE C,
       END OF TTAB.
DATA ITAB TYPE TABLE OF TTAB WITH HEADER LINE.
*variable for storing the name of the excel file to be uploaded
DATA UP_FILE TYPE STRING.
*data to be uploaded
TYPES: BEGIN OF TDAT,
        FLD1 TYPE BAPIBUS1006_CENTRAL_ORGAN-NAME1,
        FLD2 TYPE BAPIBUS1006_ADDRESS-STREET,
        FLD3 TYPE BAPIBUS1006_ADDRESS-CITY,
        FLD4 TYPE BAPIBUS1006_ADDRESS-REGION,
        FLD5 TYPE BAPIBUS1006_ADDRESS-POSTL_COD1,
        FLD6 TYPE BAPIBUS1006_ADDRESS-COUNTRY,
        FLD7 TYPE BAPIBUS1006_CENTRAL-PARTNEREXTERNAL,
       END OF TDAT.
DATA IDAT TYPE TABLE OF TDAT WITH HEADER LINE.
DATA: BUSINESSPARTNER TYPE BAPIBUS1006_HEAD-BPARTNER,
      CENTRALDATA TYPE BAPIBUS1006_CENTRAL,
      ORGANIZATION TYPE BAPIBUS1006_CENTRAL_ORGAN,
      ADDRESS TYPE BAPIBUS1006_ADDRESS,
      BAPIRETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
PARAMETERS P_FILE TYPE LOCALFILE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      STATIC    = 'X'
    CHANGING
      FILE_NAME = P_FILE.
START-OF-SELECTION.
UP_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                = UP_FILE
    TABLES
      DATA_TAB                = ITAB
    EXCEPTIONS
      FILE_OPEN_ERROR         = 1
      FILE_READ_ERROR         = 2
      NO_BATCH                = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE            = 5
      NO_AUTHORITY            = 6
      UNKNOWN_ERROR           = 7
      BAD_DATA_FORMAT         = 8
      HEADER_NOT_ALLOWED      = 9
      SEPARATOR_NOT_ALLOWED   = 10
      HEADER_TOO_LONG         = 11
      UNKNOWN_DP_ERROR        = 12
      ACCESS_DENIED           = 13
      DP_OUT_OF_MEMORY        = 14
      DISK_FULL               = 15
      DP_TIMEOUT              = 16
      OTHERS                  = 17.
*writing out the contents of the internal table itab
LOOP AT ITAB.
    WRITE:/ ITAB-REC.
    CLEAR IDAT.
    SPLIT ITAB-REC AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
                INTO IDAT-FLD1 IDAT-FLD2 IDAT-FLD3 IDAT-FLD4 IDAT-FLD5 IDAT-FLD6 IDAT-FLD7.
    APPEND IDAT.
ENDLOOP.
LOOP AT IDAT.
    MOVE: IDAT-FLD1 TO ORGANIZATION-NAME1,
          IDAT-FLD2 TO ADDRESS-STREET,
          IDAT-FLD3 TO ADDRESS-CITY,
          IDAT-FLD4 TO ADDRESS-REGION,
          IDAT-FLD5 TO ADDRESS-POSTL_COD1,
          IDAT-FLD6 TO ADDRESS-COUNTRY,
          IDAT-FLD7 TO CENTRALDATA-PARTNEREXTERNAL,
          '0001' TO CENTRALDATA-PARTNERTYPE.
    CALL FUNCTION 'BAPI_BUPA_CREATE_FROM_DATA'
      EXPORTING
        PARTNERCATEGORY         = '1'
        CENTRALDATA             = CENTRALDATA
        CENTRALDATAORGANIZATION = ORGANIZATION
        ADDRESSDATA             = ADDRESS
      IMPORTING
        BUSINESSPARTNER         = BUSINESSPARTNER
      TABLES
        RETURN                  = BAPIRETURN.
    IF BAPIRETURN IS NOT INITIAL.
      READ TABLE BAPIRETURN INDEX 1.
      MESSAGE
        ID BAPIRETURN-ID
        TYPE BAPIRETURN-TYPE
        NUMBER BAPIRETURN-NUMBER
        WITH BAPIRETURN-MESSAGE_V1
        BAPIRETURN-MESSAGE_V2
        BAPIRETURN-MESSAGE_V3
        BAPIRETURN-MESSAGE_V4.
      EXIT.
    ENDIF.
    REFRESH BAPIRETURN.
    CLEAR BAPIRETURN.
    CALL FUNCTION 'BAPI_BUPA_ROLE_ADD'
      EXPORTING
      BUSINESSPARTNER = BUSINESSPARTNER
      BUSINESSPARTNERROLE = 'BUP001'
      DIFFERENTIATIONTYPEVALUE =
      TABLES
      RETURN = BAPIRETURN.
    IF BAPIRETURN IS NOT INITIAL.
      READ TABLE BAPIRETURN INDEX 1.
      MESSAGE
        ID BAPIRETURN-ID
        TYPE BAPIRETURN-TYPE
        NUMBER BAPIRETURN-NUMBER
        WITH BAPIRETURN-MESSAGE_V1
        BAPIRETURN-MESSAGE_V2
        BAPIRETURN-MESSAGE_V3
        BAPIRETURN-MESSAGE_V4.
      EXIT.
    ENDIF.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    WRITE:/ 'Business Partner ID:', BUSINESSPARTNER.
ENDLOOP.

Hi Pushpa,
         you can use following code to create relationships using BAPI. In this Business partner is organisatin. contact persion paramenter is person. other information related to relationship details
CALL FUNCTION 'BAPI_BUPR_CONTP_CREATE'
    EXPORTING
      BUSINESSPARTNER           = SEARCH_PARTNER
      CONTACTPERSON             = CONTACT_SAP
VALIDFROMDATE             = '00010101'
VALIDUNTILDATE            = '99991231'
DEFAULTRELATIONSHIP       =
ADDRESSGUID               =
      CENTRALDATA             = WA_CENTRAL_DATA
      ADDRESSDATA             = WA_ADDR_DATA
      TABLES
    BAPIADTEL                 = I_TEL_DATA
    BAPIADFAX                 = I_FAX_DATA
BAPIADTTX                 =
BAPIADTLX                 =
    BAPIADSMTP                = I_EMAIL_DATA
BAPIADRML                 =
BAPIADX400                =
BAPIADRFC                 =
BAPIADPRT                 =
BAPIADSSF                 =
BAPIADURI                 =
BAPIADPAG                 =
BAPIAD_REM                =
BAPICOMREM                =
     RETURN                    = I_RETURN
hope this will help you
Siva

MacBook not reading the data on my harddrive now?

Similar Messages

Maybe you are looking for