Macbook now takes longer to boot up after recent software update
On 2/19 I installed the following updates for my MacBook -
iPhoto v6.0.6
Front Row v1.3.1
AirPort Base Station Update 2007-002 v5.2.1
iDVD v6.0.4
MacBook EFI Firmware v1.1
Mac OS X update combined Intel 10.4.11
My MacBook is the 2 ghz intel core 2 duo with 1gb 667 mhz ddr2 sdram, if that matters. What happens is that the initial gray screen during startup is blank for 25 secs. then the Apple logo appears. Soon after, all is quick and good. It's just the weird blank screen that I'm wondering about. Why is it doing this and is this an indication of a problem? What can I do about it? Let me know if you need more info, though I"ll be going to work soon and won't have my laptop.
Thanks!
Sue
First thin you et a chance, Use Disk Utility to verify/Repair the HD, then Repair Permissions then reboot, if the problems persist try reinstalling the big Combo update...
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions afterwards, reboot.
It is generally trying to repair the HD in that "blank" period... or having trouble reading it.
Similar Messages
-
Macbook will not boot up after running Software Update
My MacBook will not boot up after running Software Update (Security update + Java?) earlier today. I have only the gray start up screen + Apple logo + gear wheel constantly rotating. I have tried restarts several times and tried to start up from my original system DVD - this makes no difference.
I called Apple support, tried resetting the power and PRAM - still no difference. He had no knowledge of other problems reported; although I note recent post may have same issue.
I cannot get an appointment at my Apple Store before Monday.
Any suggestions?Still no success. When I hold down the option key when powering up I get the hard disk icon plus arrowhead (only). When clicking the arrowhead it goes to the gray screen + apple logo+ rotating gearwheel.
This happens both with DVD in slot and without DVD. the DVD image is not coming up on screen. When I start up without DVD the hard disk icon appears promptly. When I start with DVD in the DVD is spinning for a short period before the hard disk icon appears. On clicking the arrowhead to hard disk icon the DVD spins again for a while then stops. Apart from the DVD spinning, both situations result in gray screen + apple logo+ rotating gearwheel. -
Macbook will not boot up after running Software Update (Couldn't fix it)
Hi there,
I also have been experiencing some problems after running Software Update (Security update + Java) a couple of days ago. Similarly to Jandaf (http://discussions.apple.com/thread.jspa?messageID=9000023) I have only the gray start up screen + Apple logo + gear wheel constantly rotating. Based on the information provided in this forum I have tried some procedures which didn't solved my problem so far. Below I describe I have tried:
1) I have booted using the installation DVD and run the disk utility. When performing the First Aid/Verify Disk I found some errors ('Invalid node structure'). But I couldn't fix the problem using disk repair (same problem 'Invalid node structure' 'Volume check failed'.
2) I also tried to boot in single user mode (command + s) to run fsck -fy. It didn't work. I got the following message (last 4 lines):
CSRHIDTTransitionDriver::probe: -s
CSRHIDTTransitionDriver::probe: booting in single user .. do not match
Extension "com.apple.driver.AppleUSBTCKeyboard" has no kernel dependency.
Extension "com.apple.driver.AppleUSBTCEventDriver" has no kernel dependency.
3) When trying to boot in safe mode. I got a grey screen with the following message:
'You need to restart your computer. Hold down the power button for several seconds or press the Restart button".
4) I also tried to 'Archieve & Instal'. Again no success. After reading the DVD the action is terminated because some errors (does not specify).
5) I also tried the 'German Medicine' (http://discussions.apple.com/message.jspa?messageID=8728797#8728797) (i.e. Connect the 'problematic MacBook' to my old G4 via firewire and reinstall the 2009-001 update). Again no success. The G4 cannot mount the MacBook hardrive.
I don't know what to do any more.
A) Can I resuscitate my old system? If yes how?
B) If not, can I at least save the data I have in my old HD?
C) Is it possible to format and reinstall the OS or is this this computer doomed?
Apologies for writing so many questions but I'm really freaking out!
Thank you.
B.Hi BDAqua,
I did as you said and got a firewire backup drive (Seagate - FreeAgent Desk 500GB). I tried to make a carbon copy of HD but it seems that the copy had some problems. Below I report both the CCC and console logs:
1) "Cloning method: Backup everything
Delete items on target that aren't on the source: No
18:23:39 Enabling ownership on the target volume...
18:23:50 The target volume has ownership enabled.
18:23:50 The target volume has Access Control Lists enabled.
18:23:50 Authenticating...
18:23:50 Initiating synchronization engine...
18:23:51 Cloning...
18:31:20 rsync: readdir("/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj"): Input/output error (5)
19:04:41 rsync: readdir("/System/Library/Components/AudioCodecs.component/Contents/Resources/Fr ench.lproj"): Input/output error (5)
19:05:41 rsync: readdir("/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj"): Input/output error (5)
19:06:01 rsync: readdir("/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj"): Input/output error (5)
19:07:05 rsync: readdir("/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBC DCECMData.kext/Contents/Resources/French.lproj"): Input/output error (5)
19:10:13 rsync: readdir("/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Resou rces/French.lproj"): Input/output error (5)
19:50:10 rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2] (51)
19:50:11 rsync: Some errors were encountered during the backup., Error code: 51
19:50:14 Sync Engine warnings: (
"rsync: readdir(\"/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/Components/AudioCodecs.component/Contents/Resources/F rench.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSB CDCECMData.kext/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Reso urces/French.lproj\"): Input/output error (5)",
"rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2]"
2) "Mac OS X Version 10.4.11 (Build 8S2167)
2009-03-01 10:30:14 +0100
2009-03-01 10:30:21.962 SystemUIServer[213] lang is:en
Mar 1 11:20:32 Bs-Home-Mac /usr/sbin/ocspd: starting
Mar 1 11:38:25 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 12:46:40 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 13:54:55 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 15:03:13 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 16:11:31 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 17:19:46 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Main starting
2009-03-01 17:47:20.393 Skype[313] SkypeApplication::init called
2009-03-01 17:47:21.554 Skype[313] SKInitDebugLogging
2009-03-01 17:47:46.169 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
2009-03-01 17:47:47.208 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
Starting the process...
2009-03-01 17:48:36.186 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:36.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:37.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:37.369 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:59:16.450 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
Mar 1 17:59:19 Bs-Home-Mac crashdump[355]: Skype crashed
Mar 1 17:59:20 Bs-Home-Mac crashdump[355]: crash report written to: /Users/bernardolima/Library/Logs/CrashReporter/Skype.crash.log
Mar 1 18:23:50 Bs-Home-Mac authexec: executing /Applications/Carbon Copy Cloner.app/Contents/Resources/helper_tool
Mar 1 18:28:01 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Main starting
2009-03-01 18:41:03.154 Skype[393] SkypeApplication::init called
2009-03-01 18:41:12.433 Skype[393] SKInitDebugLogging
Mar 1 19:36:16 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 19:55:54 Bs-Home-Mac mdimportserver[480]: -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2746
Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
Mar 1 20:44:34 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 21:52:51 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 23:01:07 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor"
Due to my lack of knowledge I can't judge how bad this is. But I can tell you that every time I read the word bad in the log it scares the s*** out me. -
Flash player not working after recent software update
I have a MAC OSX 10.5.8, after the recent software update my flash player no longer works.
I have read that there is a problem with security for the version of flash that I was using and this is the reason it was disabled. However, I have tried to download the most recent version from the Adobe website, but nothing happens and a message says I already have flash installed on my computer.
I have a version of flash in my HD>>Library>>Internet plug-ins, and there is also one in HD>>Library>>Internet plug-ins (Disabled) which I have tried to move but it only lets you copy it and it seems unable to be moved back to HD>>Library>>Plug-ins
I have also tried to download the "No Script" addon for Firefox so that I can at least have flash working in Firefox, but that doesn't seem to be downloading either.
Please could somebody help me. I cannot now watch videos, listen to my favourite radio stations or even upload pics to ebay to create ebay listings. This problem ruining my internet enjoyment and I just hope that it can be fixed again. How dare Apple just do this without any warning or giving any info on how to easily fix this problem once flash has been disabled.
I am not a techie so maybe there is an easy fix, but I have spent hours trying a lot of different things but nothing seems to be working.Please, nobody waste any time replying to this issue as the problem appears to be fixed now. I rarely restart my laptop as I usually just put it to sleep, however, I restarted it and the problem looks to have gone away. I may have fixed it with some of the things I tried, but the laptop may just have needed restarting - I'm not sure.
But as long as the problem is resolved, I'm happy. :-)))
Thanks anyway! -
Hi there,
Can anyone out there help, after a recent Apple software update my Epson Stylus Photo RX640 will no longer print, every other aspect of the printer works fine including the scanner but it just will not print, I sent an email to apple but all i got was an automated reply directing me to their support page, the email i sent is below this explains in full what the problem is & what i have done to try & fix this problem.
Dear Apple,
I'm pulling my hair out after a recent software update from apple, since this update my Epson Stylus Photo RX640 will not print, every other function of the printer including the scanner works fine,
Please see attached file of the error message coming up in the print queue.
I have spent days trying to fix this, i have been onto Epsons website & followed their resolution for this error message to no avail, after contacting them again with the results i got an email back saying : In response to your email, the RX640 will use an inbox or gutenprint driver on Mac OS X 10.6.8, it is not compatible with an Epson driver.
I have also tried re-installing drivers from original Discs for the printer but it still will not print, obviously this error has been caused by Apple's latest software update, when are Apple going to fix this problem? i need my printer working ASAP.
Regards
Brian
PS i obviously can't attach the error message so here it is: Error:/Library/Printer/Epson/inkjetprinter 2/filter/rastertoescpll.app/contents/mac os/rastertoescpll/failed
Thank You all in advance
Regards
BrianIt is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398 -
Lexmark P6250 scanner not working with iMac after recent software update, any ideas?
The scanner has always worked with the iMac but after a recent software update only the printer works now. I have searched the apple communities boards and have downloaded a variety of drivers suggested but nothing has solved the issue.
When I load print and scan from system preferences, I select to open the scanner and the process just hangs. I can see the scanner and am able to select to open but not able to scan.
Any ideas on how to resolve?Unfortunately I have tried this and I have downloaded new drivers and restarted both the iMac and printer/scanner numerous times but I still only have the printer working.
I have tried to use preview via system preferences, print and scan and the when I select open scanner for preview the application hangs. I have also tried to use image capture and there is an error when selecting the scanner device of "Lexmark Language Error". When selecting overview within image capture I am advised that the size tryng to be scanned is too large when nothing has been selected and the default setting are standard size and then image capture hangs.
All features were working fine prior to conducting a software update about 8-10 weeks ago. I have downloaded further software updates which I had hoped would sort this issue but it hasn't. -
Phone not responsive after recent software update
I have just updated my phone (iPhone 5) with the most recent software update and it's now "died". It was 100% charged and I'm now faced with an unresponsive phone which just shows the "plug to iTunes" visual.
Anyone else have the problem and know how to resolve it?
*Frustrated*
PS did it for my iPad and it went through no problems.You're right. Just tried for the sixth time. Thank you. What a productive Monday afternoon!
-
Programs won't launch & finder crashing after recent software updates
Finder and most programs won't launch after a software update. I was able to run Cocktail and repair permissions. I've restarted a few times, and ran disk utility from the start up disk to no avail.
Any suggestions?
thankshttp://www.thexlab.com/faqs/multipleappsquit.html
-
Macbook pro takes long to boot up 30 minutes
Hi all,
First of all, thanks for all the help this community has provided so far.
Unfortunately I haven't been able to find a solution so far.
Product:
MacBook Pro (13-inch, Mid 2010)
OS X 10.6.8
2.4GHz Intel core 2 duo
4GB 1067 MHz DDR3
It is quite old, but for no reason, the performance is going downhill and every day is taking longer to boot or work with it.
The spinning ball appears after every action and it takes more than 30 minutes to boot (I'm now writing from a different laptop as it has become practically unusable). Good news is I did backup everything when it started performing poorly.
Actions so far:
Apple Hardware extended Test, run 3 times, no errors.
Check disk errors: no errors
Check and fix disk permissions: no improvement
I'm running out of ideas...
Obviously, it has been long time out of warranty, and I'm not sure is worth an expensive fix as I know I have to replace it soon.
I would like to keep it as a secondary laptop.
Do you have any ideas about tests I haven't run?
Thanks in advance!
System.log:
Oct 9 21:35:21 localhost bootlog[41]: BOOT_TIME: 1381350857 0
Oct 9 21:37:41 localhost DirectoryService[36]: Improper shutdown detected
Oct 9 21:38:28 localhost blued[42]: Apple Bluetooth daemon started
Oct 9 21:39:14 localhost com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 9 21:39:19: --- last message repeated 2 times ---
Oct 9 21:39:19 localhost configd[39]: InterfaceNamer: timed out waiting for IOKit to quiesce
Oct 9 21:39:19 localhost configd[39]: InterfaceNamer: Busy services :
Oct 9 21:39:19 localhost configd[39]: InterfaceNamer: MacBookPro7,1 [1]
Oct 9 21:39:19 localhost configd[39]: InterfaceNamer: No network stack object
Oct 9 21:39:20 localhost mDNSResponder[26]: mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) starting
Oct 9 21:39:21 MacBook-Pro-di-xxx-xxx configd[39]: setting hostname to "MacBook-Pro-di-xxx-xxx.local"
Oct 9 21:39:21 MacBook-Pro-di-xxx-xxx configd[39]: network configuration changed.
Oct 9 21:40:24 MacBook-Pro-di-xxx-xxx com.apple.launchd[1] (com.apple.SystemStarter): Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
Oct 9 21:40:30: --- last message repeated 3 times ---
Oct 9 21:40:26 MacBook-Pro-di-xxx-xxx com.apple.usbmuxd[19]: usbmuxd-323 on Jul 29 2013 at 23:21:29, running 64 bit
Oct 9 21:40:30 MacBook-Pro-di-xxx-xxx com.apple.launchd[1] (com.apple.SystemStarter): Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
Oct 9 21:40:31: --- last message repeated 3 times ---
Oct 9 21:40:31 MacBook-Pro-di-xxx-xxx configd[39]: network configuration changed.
Oct 9 21:40:31 MacBook-Pro-di-xxx-xxx mDNSResponder[26]: mDNSPlatformSetDNSConfig: Error: dns_configuration_copy returned NULL
Oct 9 21:40:31 MacBook-Pro-di-xxx-xxx configd[39]: network configuration changed.
Oct 9 21:40:34 MacBook-Pro-di-xxx-xxx root[73]: sntp options: a=2 v=1 e=0.100 E=5.000 P=2147483647.000
Oct 9 21:40:34 MacBook-Pro-di-xxx-xxx root[73]: d=15 c=5 x=0 op=1 l=/var/run/sntp.pid f= time.euro.apple.com
Oct 9 21:40:34 MacBook-Pro-di-xxx-xxx root[73]: sntp: getaddrinfo(hostname, ntp) failed with nodename nor servname provided, or not known
Oct 9 21:40:42 MacBook-Pro-di-xxx-xxx XProtectUpdater[17]: NSURLConnection error: Error Domain=NSURLErrorDomain Code=-1009 UserInfo=0x102c0f2e0 "This computer’s Internet connection appears to be offline." Underlying Error=(Error Domain=kCFErrorDomainCFNetwork Code=-1009 UserInfo=0x102c14e40 "This computer’s Internet connection appears to be offline.")
Oct 9 21:40:42 MacBook-Pro-di-xxx-xxx com.apple.launchd[1] (com.apple.xprotectupdater[17]): Exited with exit code: 255
Oct 9 21:40:43 MacBook-Pro-di-xxx-xxx crsud[37]: INSERT-HANG-DETECTED: Tx time:4.395696, # of Inserts: 0, # of bytes written: 0, Did shrink: NO
Oct 9 21:41:46 MacBook-Pro-di-xxx-xxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 9 21:41:46: --- last message repeated 2 times ---
Oct 9 21:41:46 MacBook-Pro-di-xxx-xxx com.apple.launchd[1] (com.apple.SystemStarter): Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
Oct 9 21:42:07: --- last message repeated 3 times ---
Oct 9 21:42:07 MacBook-Pro-di-xxx-xxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 9 21:42:08: --- last message repeated 9 times ---
Oct 9 21:42:08 MacBook-Pro-di-xxx-xxx /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[27]: Login Window Application Started
Oct 9 21:42:09 MacBook-Pro-di-xxx-xxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 9 21:42:20: --- last message repeated 7 times ---
Oct 9 21:42:18 MacBook-Pro-di-xxx-xxx com.apple.launchd[1] (com.apple.SystemStarter): Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
Oct 9 21:42:20: --- last message repeated 1 time ---
Oct 9 21:42:20 MacBook-Pro-di-xxx-xxx ntpd[15]: bind() fd 26, family 30, port 123, scope 6, addr fe80::f2b4:79ff:fe15:2ecd, in6_is_addr_multicast=0 flags=0x11 fails: Can't assign requested address
Oct 9 21:42:20 MacBook-Pro-di-xxx-xxx ntpd[15]: unable to create socket on en1 (5) for fe80::f2b4:79ff:fe15:2ecd#123
Oct 9 21:43:09 MacBook-Pro-di-xxx-xxx configd[39]: network configuration changed.
Oct 9 21:43:32 MacBook-Pro-di-xxx-xxx com.apple.launchctl.Background[89]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Oct 9 21:44:14 MacBook-Pro-di-xxx-xxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 9 21:44:14 MacBook-Pro-di-xxx-xxx com.apple.kextd[10]: Rescanning kernel extensions.
Oct 9 21:44:14 MacBook-Pro-di-xxx-xxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 9 21:44:56: --- last message repeated 8 times ---
Oct 9 21:44:28 MacBook-Pro-di-xxx-xxx ntpd[15]: time reset -4.894810 s
Oct 9 21:44:56 MacBook-Pro-di-xxx-xxx com.apple.launchctl.LoginWindow[96]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Oct 9 21:46:38 MacBook-Pro-di-xxx-xxx loginwindow[27]: Login Window Started Security Agent
Oct 9 21:46:42 MacBook-Pro-di-xxx-xxx mdworker[82]: (Error) SyncInfo: Catalog changed during searchfs too many times -- falling back to fsw search /
Oct 9 21:46:42 MacBook-Pro-di-xxx-xxx loginwindow[27]: Login Window - Returned from Security Agent
Oct 9 21:46:42 MacBook-Pro-di-xxx-xxx loginwindow[27]: USER_PROCESS: 27 console
Oct 9 21:46:45 MacBook-Pro-di-xxx-xxx com.apple.launchctl.Background[109]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Oct 9 21:46:45 MacBook-Pro-di-xxx-xxx com.apple.launchctl.Aqua[110]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Oct 9 21:46:45 MacBook-Pro-di-xxx-xxx com.apple.launchctl.Aqua[110]: launchctl: Dubious permissions on file (skipping): /etc/mach_init_per_user.d/com.adobe.SwitchBoard.monitor.plist
Oct 9 21:46:45 MacBook-Pro-di-xxx-xxx com.apple.launchd.peruser.501[108] (com.kodak.BonjourAgent): Unknown key for string: Kodak Version
Oct 9 21:46:45 MacBook-Pro-di-xxx-xxx com.apple.launchd.peruser.501[108] (com.kodak.BonjourAgent): Unknown key: Kodak Version
Oct 9 21:46:45 MacBook-Pro-di-xxx-xxx com.apple.launchd.peruser.501[108] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Oct 9 21:46:46 MacBook-Pro-di-xxx-xxx com.apple.launchd[1] (com.wacom.pentablet[100]): Exited with exit code: 255
Oct 9 21:46:49 MacBook-Pro-di-xxx-xxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 9 21:47:19: --- last message repeated 1 time ---
Oct 9 21:47:46 MacBook-Pro-di-xxx-xxx com.hp.messagecenter.launcher[131]: ThrottleProcessIO: throttling disk i/o
Oct 9 21:48:01 MacBook-Pro-di-xxx-xxx fontd[142]: Database content version mismatch (stored(15) != expected(14))
Oct 9 21:48:01 MacBook-Pro-di-xxx-xxx fontd[142]: Failed to open read-only database, regenerating DB
Oct 9 21:48:03 MacBook-Pro-di-xxx-xxx com.apple.launchd.peruser.501[108] (com.apple.Kerberos.renew.plist[126]): Exited with exit code: 1
Oct 9 21:48:03 MacBook-Pro-di-xxx-xxx Adobe Reader Updater Helper[137]: INSERT-HANG-DETECTED: Tx time:29.652770, # of Inserts: 0, # of bytes written: 0, Did shrink: NO
Oct 9 21:48:06 MacBook-Pro-di-xxx-xxx com.apple.launchd.peruser.501[108] (com.apple.mrt.uiagent[125]): Exited with exit code: 255
Oct 9 21:49:26 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 Configuration.cpp Line 713 at LoadConfigurationFile() [60/65794 ms]: PID 130 Thread 0xA00D8540 Configuration.cpp Line 713 at LoadConfigurationFile() [60/65794 ms]: First time checking the Info.plist!
Oct 9 21:49:26 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Read 948 bytes from the Info.plist.
Oct 9 21:49:26 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Logging key was found! Checking its value ...
Oct 9 21:49:26 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Logging prefix was found! Checking its value ...
Oct 9 21:49:26 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: No change in the logging value.
Oct 9 21:49:26 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: About to load configuration files ...About to load configuration files ...
Oct 9 21:49:26 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Read 8935 bytes from the global plist.
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOTwainScanToPath = /Library/Printers/Kodak/AiO_Printers/Utilities/Twain Scan To.app
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gNumPluginsToUse = 2
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOICAScanDriverPath[0] = /Library/Image Capture/Devices/KODAK AiO Scan Driver.app
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOICAScanDriverPath[1] = /Library/Image Capture/Devices/KODAK AiO2 Scan Driver.app
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOPluginPath[0] = /Library/Printers/Kodak/AiO_Printers/AIOIO.plugin
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOPluginPath[1] = /Library/Printers/Kodak/AiO_Printers/AIO2IO.plugin
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gPrinterDescriptorArrayNumItems[0] = 15
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gPrinterDescriptorArrayNumItems[1] = 17
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][0].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][0].modelPID = 16421
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][0].modelName = 5100
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][0].modelType = 0
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][1].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][1].modelPID = 16422
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][1].modelName = 5300
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][1].modelType = 1
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][2].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][2].modelPID = 16423
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][2].modelName = 5500
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][2].modelType = 2
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][3].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][3].modelPID = 16433
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][3].modelName = ESP 3
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][3].modelType = 3
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][4].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][4].modelPID = 16434
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][4].modelName = ESP 5
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][4].modelType = 5
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][5].modelVID = 16700
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][5].modelPID = 21251
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][5].modelName = Dell
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][5].modelType = 6
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][6].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][6].modelPID = 16446
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][6].modelName = ESP 7
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][6].modelType = 7
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][7].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][7].modelPID = 16447
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][7].modelName = ESP 9
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][7].modelType = 9
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][8].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][8].modelPID = 16451
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][8].modelName = ESP 3200
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][8].modelType = 3200
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][9].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][9].modelPID = 16449
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][9].modelName = ESP 5200
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][9].modelType = 5200
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][10].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][10].modelPID = 16467
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][10].modelName = ESP Office 4100
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][10].modelType = 4100
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][11].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][11].modelPID = 16468
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][11].modelName = ESP Office 6100
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][11].modelType = 6100
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][12].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][12].modelPID = 16470
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][12].modelName = ESP 7200
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][12].modelType = 7200
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][13].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][13].modelPID = 16485
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][13].modelName = ESP 9200
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][13].modelType = 9200
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][14].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][14].modelPID = 16457
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][14].modelName = ESP LION
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][14].modelType = 11
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][0].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][0].modelPID = 16471
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][0].modelName = 110
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][0].modelType = 110
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][1].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][1].modelPID = 16472
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][1].modelName = 115
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][1].modelType = 115
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][2].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][2].modelPID = 16477
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][2].modelName = 310
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][2].modelType = 310
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][3].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][3].modelPID = 16478
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][3].modelName = 315
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][3].modelType = 315
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][4].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][4].modelPID = 16473
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][4].modelName = ESP Office 2150
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][4].modelType = 2150
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][5].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][5].modelPID = 16486
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][5].modelName = ESP Office 2170
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][5].modelType = 2170
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][6].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][6].modelPID = 16482
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][6].modelName = Office HERO 6.1
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][6].modelType = 601
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][7].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][7].modelPID = 16484
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][7].modelName = HERO 5.1
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][7].modelType = 501
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][8].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][8].modelPID = 16483
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][8].modelName = HERO 7.1
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][8].modelType = 701
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][9].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][9].modelPID = 16487
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][9].modelName = HERO 9.1
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][9].modelType = 901
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][10].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][10].modelPID = 16493
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][10].modelName = HERO 3.1
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][10].modelType = 301
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][11].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][11].modelPID = 16490
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][11].modelName = ESP 1.2
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][11].modelType = 102
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][12].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][12].modelPID = 16491
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][12].modelName = ESP 3.2
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][12].modelType = 302
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][13].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][13].modelPID = 16475
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][13].modelName = HERO 6.2
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][13].modelType = 602
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][14].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][14].modelPID = 16474
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][14].modelName = HERO 8.2
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][14].modelType = 802
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][15].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][15].modelPID = 16488
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][15].modelName = HERO 2.2
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][15].modelType = 202
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][16].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][16].modelPID = 16489
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][16].modelName = HERO 4.2
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][16].modelType = 402
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained all of gPrinterDescriptorArray[][]!
Oct 9 21:49:30 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Read 518 bytes from the local plist.
Oct 9 21:49:30 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gPluginIndex_RTC = 1
Oct 9 21:49:30 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gScanPathPrefix = /tmp/aioscan
Oct 9 21:49:30 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOMaxSharedPrinters[0] = 8
Oct 9 21:49:30 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOMaxSharedPrinters[1] = 8
Oct 9 21:49:30 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOSharedMemoryBlockSize[0] = 66560
Oct 9 21:49:30 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOSharedMemoryBlockSize[1] = 131072
Oct 9 21:49:30 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 Configuration.cpp Line 731 at LoadConfigurationFile() [70/70924 ms]: PID 130 Thread 0xA00D8540 Configuration.cpp Line 731 at LoadConfigurationFile() [70/70924 ms]: ... Finished loading configuration files.... Finished loading configuration files.
Oct 9 21:49:30 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 main.cpp Line 388 at main() [70/70924 ms]: PID 130 Thread 0xA00D8540 main.cpp Line 388 at main() [70/70924 ms]: *** Starting Bonjour Agent! ****** Starting Bonjour Agent! ***
Oct 9 21:49:32 MacBook-Pro-di-xxx-xxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 9 21:49:34: --- last message repeated 1 time ---
Oct 9 21:49:34 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 main.cpp Line 209 at SwitchEventsRegister() [70/74683 ms]: PID 130 Thread 0xA00D8540 main.cpp Line 209 at SwitchEventsRegister() [70/74683 ms]: Switch events are now registered!Switch events are now registered!
Oct 9 21:49:35 MacBook-Pro-di-xxx-xxx WindowServer[78]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Oct 9 21:49:35 MacBook-Pro-di-xxx-xxx com.apple.WindowServer[78]: Wed Oct 9 21:49:35 MacBook-Pro-di-xxx-xxx.local WindowServer[78] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Oct 9 21:50:01 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 Configuration.cpp Line 607 at LoadConfigurationFile() [90/1610 ms]: PID 130 Thread 0xA00D8540 Configuration.cpp Line 607 at LoadConfigurationFile() [90/1610 ms]:
Oct 9 21:50:01 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: First time checking the Info.plist!
Oct 9 21:50:01 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Read 1259 bytes from the Info.plist.
Oct 9 21:50:01 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Logging key was found! Checking its value ...
Oct 9 21:50:01 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Logging prefix was found! Checking its value ...
Oct 9 21:50:01 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: No change in the logging value.
Oct 9 21:50:01 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: About to load configuration files ...About to load configuration files ...
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: <CFURL 0x10c5b0 [0xa
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: 0669ec0]>{type = 0, string = /Library/Printers/Kodak/AiO_Printers/KodakAi
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: OBonjourAgent.app/Contents/MacOS/KodakAiOBonjourAgent, encoding = 134217984, base = (null)}
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Read 8935 bytes from the global plist.
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOTwainScanToPath = /Library/Printers/Kodak/AiO_Printers/Utilities/Twain Scan To.app
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gNumPluginsToUse = 2
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOICAScanDriverPath[0] = /Library/Image Capture/Devices/KODAK AiO Scan Driver.app
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOICAScanDriverPath[1] = /Library/Image Capture/Devices/KODAK AiO2 Scan Driver.app
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOPluginPath[0] = /Library/Printers/Kodak/AiO_Printers/AIOIO.plugin
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOPluginPath[1] = /Library/Printers/Kodak/AiO_Printers/AIO2IO.plugin
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gPrinterDescriptorArrayNumItems[0] = 15
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gPrinterDescriptorArrayNumItems[1] = 17
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][0].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][0].modelPID = 16421
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][0].modelName = 5100
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][0].modelType = 0
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][1].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][1].modelPID = 16422
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][1].modelName = 5300
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][1].modelType = 1
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][2].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][2].modelPID = 16423
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][2].modelName = 5500
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][2].modelType = 2
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][3].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][3].modelPID = 16433
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][3].modelName = ESP 3
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][3].modelType = 3
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][4].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][4].modelPID = 16434
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][4].modelName = ESP 5
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][4].modelType = 5
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][5].modelVID = 16700
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][5].modelPID = 21251
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][5].modelName = Dell
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][5].modelType = 6
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][6].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][6].modelPID = 16446
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][6].modelName = ESP 7
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][6].modelType = 7
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][7].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][7].modelPID = 16447
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][7].modelName = ESP 9
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][7].modelType = 9
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][8].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][8].modelPID = 16451
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][8].modelName = ESP 3200
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][8].modelType = 3200
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][9].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][9].modelPID = 16449
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][9].modelName = ESP 5200
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][9].modelType = 5200
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][10].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][10].modelPID = 16467
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][10].modelName = ESP Office 4100
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][10].modelType = 4100
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][11].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][11].modelPID = 16468
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][11].modelName = ESP Office 6100
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][11].modelType = 6100
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][12].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][12].modelPID = 16470
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][12].modelName = ESP 7200
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][12].modelType = 7200
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][13].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][13].modelPID = 16485
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][13].modelName = ESP 9200
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][13].modelType = 9200
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][14].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][14].modelPID = 16457
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][14].modelName = ESP LION
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][14].modelType = 11
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][0].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][0].modelPID = 16471
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][0].modelName = 110
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][0].modelType = 110
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][1].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][1].modelPID = 16472
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][1].modelName = 115
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][1].modelType = 115
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][2].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][2].modelPID = 16477
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][2].modelName = 310
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][2].modelType = 310
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][3].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: 3].modelPID = 16478
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][3].modelName = 315
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][3].modelType = 315
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][4].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][4].modelPID = 16473
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][4].modelName = ESP Office 2150
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][4].modelType = 2150
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][5].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][5].modelPID = 16486
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][5].modelName = ESP Office 2170
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][5].modelType = 2170
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][6].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][6].modelPID = 16482
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][6].modelName = Office HERO 6.1
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][6].modelType = 601
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][7].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][7].modelPID = 16484
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][7].modelName = HERO 5.1
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][7].modelType = 501
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][8].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][8].modelPID = 16483
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][8].modelName = HERO 7.1
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][8].modelType = 701
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][9].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][9].modelPID = 16487
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][9].modelName = HERO 9.1
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][9].modelType = 901
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][10].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][10].modelPID = 16493
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][10].modelName = HERO 3.1
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][10].modelType = 301
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][11].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][11].modelPID = 16490
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][11].modelName = ESP 1.2
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][11].modelType = 102
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][12].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][12].modelPID = 16491
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][12].modelName = ESP 3.2
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][12].modelType = 302
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][13].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][13].modelPID = 16475
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][13].modelName = HERO 6.2
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][13].modelType = 602
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][14].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][14].modelPID = 16474
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][14].modelName = HERO 8.2
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][14].modelType = 802
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][15].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][15].modelPID = 16488
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][15].modelName = HERO 2.2
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][15].modelType =
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: 202
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][16].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][16].modelPID = 16489
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][16].modelName = HERO 4.2
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][16].modelType = 402
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained all of gPrinterDescriptorArray[][]!
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 Configuration.cpp Line 625 at LoadConfigurationFile() [100/2978 ms]: PID 130 Thread 0xA00D8540 Configuration.cpp Line 625 at LoadConfigurationFile() [100/2978 ms]: ... Finished loading configuration files.... Finished loading configuration files.
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerPrinterAPI.cpp Line 331 at AssignSignal() [100/2978 ms]: PID 130 Thread 0xA00D8540 TigerPrinterAPI.cpp Line 331 at AssignSignal() [100/2978 ms]: A previous signal setting for A previous signal setting for SIGTERMSIGTERM existed, so we save it... existed, so we save it...
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerPrinterAPI.cpp Line 159 at PreserveOldSignal() [100/2978 ms]: PID 130 Thread 0xA00D8540 TigerPrinterAPI.cpp Line 159 at PreserveOldSignal() [100/2978 ms]: Preserving old signal handler Preserving old signal handler truetrue for for SIGTERMSIGTERM
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerPrinterAPI.cpp Line 331 at AssignSignal() [100/2978 ms]: PID 130 Thread 0xA00D8540 TigerPrinterAPI.cpp Line 331 at AssignSignal() [100/2978 ms]: A previous signal setting for A previous signal setting for SIGABRTSIGABRT existed, so we save it... existed, so we save it...
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerPrinterAPI.cpp Line 159 at PreserveOldSignal() [100/2979 ms]: PID 130 Thread 0xA00D8540 TigerPrinterAPI.cpp Line 159 at PreserveOldSignal() [100/2979 ms]: Preserving old signal handler Preserving old signal handler truetrue for for SIGABRTSIGABRT
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerLibraryUtilities.cpp Line 2571 at ThreadCreate() [100/2979 ms]: New thread created: 0xB0185000 from within 0xA00D8540
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerLibraryUtilities.cpp Line 1955 at CommandLine() [100/2979 ms]: Initializing Command Line Mutex...
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerLibraryUtilities.cpp Line 1958 at CommandLine() [100/2979 ms]: ...Command Line Mutex initialized
Oct 9 21:50:13 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerPrinterAPI.cpp Line 996 at AiOLibrary_InitializeLibrary() [100/13195 ms]: At the start of library initialization, this process has 4 threads running.
Oct 9 21:50:13 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerPrinterAPI.cpp Line 999 at AiOLibrary_InitializeLibrary() [100/13195 ms]: ******************* LIBRARY INITIALIZED *******************
Oct 9 21:50:13 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 PumaScanHost.cpp Line 882 at StartScanHostBroadcast() [100/13207 ms]: We have a listening socket #5
Oct 9 21:50:22 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerLibraryUtilities.cpp Line 2571 at ThreadCreate() [100/22740 ms]: New thread created: 0xB0218000 from within 0xA00D8540
Oct 9 21:50:24 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xB0218000 TigerLibraryUtilities.cpp Line 2737 at ThreadExit() [100/24972 ms]:
Oct 9 21:50:24 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerTCPUtilities.cpp Line 560 at BonjourBrowserClientCallback() [100/24972 ms]: About to kill thread We are completing this thread!0xB0218000
Oct 9 21:50:25 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 PumaScanHost.cpp Line 1017 at StartScanHostBroadcast() [100/25311 ms]: Starting Bonjour ScanTo service for: MacBook-Pro-di-xxx-xxx
Oct 9 21:50:28 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 PumaScanHost.cpp Line 445 at GetApplicationListFromPrefs() [110/28542 ms]: Found Scan Host Application: Preview
Oct 9 21:50:28 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 PumaScanHost.cpp Line 863 at ConstructScanHostBonjourTXTRecord() [110/28542 ms]: Scan Host Bonjour TXT Record = txtvers=1.vid=040a#mfg=Eastman Kodak Company,product=Host ScanTo Service AppCnt=01.A00=Preview
Oct 9 21:50:38 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 main.cpp Line 456 at main() [110/38464 ms]: PID 130 Thread 0xA00D8540 main.cpp Line 456 at main() [110/38464 ms]: ICA Scan Driver installed, so we do NO USB Button Listening for Plugin #ICA Scan Driver installed, so we do NO USB Button Listening for Plugin #00!!
Oct 9 21:50:38 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 main.cpp Line 456 at main() [110/38630 ms]: PID 130 Thread 0xA00D8540 main.cpp Line 456 at main() [110/38630 ms]: ICA Scan Driver installed, so we do NO USB Button Listening for Plugin #ICA Scan Driver installed, so we do NO USB Button Listening for Plugin #11!!
Oct 9 21:50:38 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 main.cpp Line 473 at main() [110/38630 ms]: PID 130 Thread 0xA00D8540 main.cpp Line 473 at main() [110/38630 ms]: No list of pids, so we are doing no USB Button Listening!No list of pids, so we are doing no USB Button Listening!
Oct 9 21:50:38 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerLibraryUtilities.cpp Line 2571 at ThreadCreate() [110/38631 ms]: PID 130 Thread 0xA00D8540 TigerLibraryUtilities.cpp Line 2571 at ThreadCreate() [110/38631 ms]: New thread created: New thread created: 0xB031C0000xB031C000 from within from within 0xA00D85400xA00D8540
Oct 9 21:50:38 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xB031C000 RTC.cpp Line 553 at RTCThread() [110/38632 ms]:
Oct 9 21:50:38 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xB031C000 RTC.cpp Line 553 at RTCThread() [110/38632 ms]: 10 second delay in place before RTC starts up ...10 second delay in place before RTC starts up ...
Oct 9 21:50:41 MacBook-Pro-di-xxx-xxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 9 21:50:48: --- last message repeated 1 time ---
Oct 9 21:50:48 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xB031C000 RTC.cpp Line 568 at RTCThread() [110/48632 ms]: PID 130 Thread 0xB031C000 RTC.cpp Line 568 at RTCThread() [110/48632 ms]: ****** RTC Starting up! ******
Oct 9 21:50:48 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: ****** RTC Starting up! ******
Oct 9 21:50:48 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xB031C000 RTC.cpp Line 571 at RTCThread() [110/48632 ms]: PID 130 Thread 0xB031C000 RTC.cpp Line 571 at RTCThread() [110/48632 ms]: ****** Turning on RTC! ************ Turning on RTC! ******
Oct 9 21:51:37 MacBook-Pro-di-xxx-xxx com.apple.launchctl.Background[171]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Oct 9 21:51:38 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:\n com.google.Keystone.Daemon.UpdateEngine: 2 connection(s)\n com.google.Keystone.Daemon.Administration: 0 connection(s)
Oct 9 21:51:38 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone"
Oct 9 21:51:39 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s).
Oct 9 21:51:40 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(\n <KSTicket:0x505320\n productID=com.google.Keystone\n version=1.1.0.3659\n xc=<KSPathExistenceChecker:0x502c00 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>\n serverType=Omaha\n url=https://tools.google.com/service/update2\n creationDate=2013-03-10 09:43:17\n >\n)}\nUsing server: <KSOmahaServer:0x21d490\n engine=<KSDaemonUpdateEngine:0x215e40>\n params={\n EngineVersion = "1.1.0.3659";\n ActivesInfo = {\n "com.google.Keystone" = {\n LastActiveDate = 2013-10-09 21:51:32 +0100;\n LastActivePingDate = 2013-10-08 08:00:24 +0100;\n LastRollCallPingDate = 2013-10-08 08:00:24 +0100;\n };\n "com.google.Chrome" = {\n LastActiveDate = 2013-10-08 18:18:34 +0100;\n LastActivePingDate = 2013-10-08 08:00:01 +0100;\n LastRollCallPingDate = 2013-10-08 08:00:01 +0100;\n };\n "com.google.android.mtpviewer" = {\n LastActivePingDate = 2013-05-19 08:00:00 +0100;\n LastActiveDate = 2013-05-19 18:17:07 +0100;\n LastRollCallPingDate = 2013-05-19 08:00:00 +0100;\n };\n "com.google.talkplugin" = {\n LastActiveDate = 2013-09-18 22:04:59 +0100;\n LastActivePingDate = 2013-09-19 08:00:00 +0100;\n LastRollCallPingDate = 2013-10-08 08:00:11 +0100;\n };\n };\n UserInitiated = 0;\n IsSystem = 1;\n OmahaOSVersion = "10.6.8_i486";\n Identity = KeystoneDaemon;\n AllowedSubdomains = (\n ".omaha.sandbox.google.com",\n ".tools.google.com",\n ".www.google.com",\n ".corp.google.com"\n );\n }\n>
Oct 9 21:51:50 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x223110\n server=<KSOmahaServer:0x21d490>\n url="https://tools.google.com/service/update2"\n runningFetchers=0\n tickets=1\n activeTickets=1\n rollCallTickets=1\n body=\n <?xml version="1.0" encoding="UTF-8" standalone="yes"?>\n <o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">\n <o:os platform="mac" version="MacOSX" sp="10.6.8_i486"></o:os>\n <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="213" brand="GGLG">\n <o:ping r="1" a="1"></o:ping>\n <o:updatecheck></o:updatecheck>\n </o:app>\n </o:gupdate>\n>
Oct 9 21:52:01 MacBook-Pro-di-xxx-xxx com.apple.launchctl.Background[178]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Oct 9 21:54:07 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[NSTask(KSKill) killGroup] [NSTask killGroup] process group 173 did not respond to TERM, sending KILL.
Oct 9 21:55:31 MacBook-Pro-di-xxx-xxx kernel[0]:
Oct 9 21:55:49: --- last message repeated 1 time ---
Oct 9 21:55:49 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSOutOfProcessFetcher(PrivateMethods) helperDidTimeout:] KSOutOfProcessFetcher timeout while waiting for fetch. [com.google.UpdateEngine.CommonErrorDomain:1502]
Oct 9 21:55:49 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSServerUpdateRequest(PrivateMethods) fetcher:failedWithError:] KSServerUpdateRequest fetch failed. (productIDs: com.google.Keystone) [com.google.UpdateEngine.CoreErrorDomain:702 - 'https://tools.google.com/service/update2'] (KSOutOfProcessFetcher timeout while waiting for fetch. [com.google.UpdateEngine.CommonErrorDomain:1502])
Oct 9 21:55:49 MacBook-Pro-di-xxx-xxx com.apple.launchd.peruser.4294967294[177] (0x1005030e0.anonymous.ksfetch[173]): Failed to add kevent for PID 173. Will unload at MIG return
Oct 9 21:55:49 MacBook-Pro-di-xxx-xxx com.apple.launchd.peruser.4294967294[177] (0x1005030e0.anonymous.ksfetch[173]): Unloading PID 173 at MIG return.
Oct 9 21:55:49 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
Oct 9 21:55:50 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
Oct 9 21:55:50 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
Oct 9 21:55:50 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
Oct 9 21:55:50 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
Oct 9 21:55:50 MacBook-Pro-di-xxx-xxx GoogleSHello London0910. There isn't much more troubleshooting you can do to speed up the computer. I would review this thread for maybe additional resources and suggestions: http://goo.gl/w9o60j
-
Macbook Pro takes long to boot up, Freezes easily, Gets Gray Screen saying restart
I've had my Macbook Pro 13 since November 2010, I am still running Snow Leopard, never upgraded or anything. Since last March, my computer takes a long time to turn on, get to the screen where I log in. If I click anything when it gets to the screen right away, I can't click anything, the mouse moves, but nothing responds. I have to wait a good 15-20 minutes before I can click anything. I usually turn my computer on, and leave, come back 25-30 minutes later, and log in. When I have over 3 applications open, ex Firefox, MS Word, Spotify, my computer lags, and sometimes freezes. The freezes last from 30 seconds, to me having to restart the computer. Sometimes the computer freezes randomly when I'm just browsing. Around 70-80% of the time, when I play a video, using flash player like youtube, my computer lags, and after watching a video or 2, the computer freezes. Most of the time, the freeze stays frozen, and around 10 minutes later my mouse can move, but the screen is frozen, and the rainbow loading symbol starts. I just restart the computer. Sometimes, around once every 2 days, or sometimes it happens around 10 times in a couple of hours of me using the computer, my computer gets a gray screen that descends down the screen, it says in multiple languages that I have to immediately restart my computer by pressing the power button down and then pressing it again. Oh, and the bottom of my computer always gets really really hot when I use it.
It is a huge hassle, I can still use the computer, but I would love it if my computer was fixed.I am still running Snow Leopard, never upgraded or anything.
What about updates? Check software update.
How large is your hard drive and how much hard drive space do you have left?
Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer. Now reboot.
If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again. If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up. At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver.
If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode.
If the Mac starts up correctly, restart without pressing the "shift" key.
If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
(If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Remove any 3rd party ram.
Reinstall Snow Leopard - This will install a "fresh" copy of Snow Leopard without archiving old system files but leaves the rest of your files in place.
Oh, and the bottom of my computer always gets really really hot when I use it.
User Tip: How to deal with MacBook Pro and MacBook heat?
Per your user manual: Do not operate your MacBook Pro on a pillow or other soft material, as the material can block the airflow vents. Never place anything over the keyboard when operating your MacBook Pro. Never push objects into the ventilation openings.
From MacBook Pro: Care, Use, and Safety Information
For prolonged use, place your MacBook Pro on a flat, stable surface. Do not place your MacBook Pro on your lap or other body surface for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn. -
My macbook wont boot up after a software update (2/8/2012)
My MacBook Pro will not reboot after a failed software update that was attempted on 2/8/2012. I am not sure if other users have experienced similar issues. It will not go past the white screen. I have powered down the computer few times already to no avail. Any help or advice is greatly appreciated. Thanks
Do the following:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
Has anybody noticed that it takes longer to boot up since the last update on my iMac?
It seems to me that bootup now takes extra time to complete on my 21" iMac since the last security update. Is this real, or have I never noticed it before?
It seems to me that bootup now takes extra time to complete on my 21" iMac since the last security update. Is this real, or have I never noticed it before?
-
Computer will not boot up after recent software install
I recently tried to install a series of software updates. Not all were successful. Soon therafter the computer froze up while in safari. I turned it off and the computer would not boot up on restart, and instead sent me to the darwin login screen. I rebooted in safe mode per these forums, and turned off an itunes startup function, and then rebooted. That seemed to do the trick as I could now get back into the OS, but the computer was dreadfully slow. It froze up again in Safari and I turned it off again, and this time it would not go past the grey startup screen with the apple. I tried safe mode again, but the computer would shut down around 30 seconds after the wheel below the grey apple started turning. I Was able to get my Tiger Install DVD in the drive, and turned the computer back on, but now just get the grey apple screen and the wheel spinning indefinitely. I cannot do an erase and install because my photos are not backed up. Please help!
ThanksHi, Deaton41. Welcome to the Discussions.
You wrote: "I recently tried to install a series of software updates. Not all were successful."I suspect the only way you are going to resolve this is by performing an Archive and Install. For important tips on this process, see my "General advice on performing an Archive and Install" FAQ. Perform the steps therein in the specified order. If you follow my FAQ's steps to the letter, then your photos should be AOK, assuming directory corruption hasn't damaged them. I suspect directory corruption is the root cause of the unsuccessful software updates, which that then led to your current problem re: start up.
Before installing future software updates, you may wish to consider the advice in my "Installing Software Updates" FAQ. Taking the steps therein before installing an update often helps avert problems and gives you a fallback position in case trouble arises.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
Problems booting up after failed software update
Hi all...
I have an iBook G4 running 10.4.9. I just ran a software update, and a few things like itunes and iphoto updated fine, but the update to 10.4.11 failed. I restarted figuring I'd just try the failed update again after the reboot, but now it won't boot.
It goes past the grey screen, to the blue one with the window that shows the apple logo and "Mac OS_X" with a progress bar underneath.
The progress bar just sits there, and won't advance at all.
I'm just not sure what to do at this point... if the update failed halfway through and theres something messed up, or what... I'm not sure. Any ideas?Please pardon the intrusion…
Hi, BDAqua!
Congratulations on advancing to Level 4!
At the Water Cooler in the Level 4 Lounge, we are throwing virtual confetti in celebration of your attainment of Level 4-dom. Would you care to join us at the Water Cooler?
On the Discussions Home Page, down at the bottom, you will, hopefully, soon find the Lounge link available to you. It should show up for you within the next 24 hours if all goes as it should.
Hope to see you there soon! -
Pb won't boot up after routine software update
HELP!
Recently my PB has been giving me messages that my HD was almost full. I have erased and backed up some (but not all) files. I did a routine software update and after this the same message about my HD came up. My computer has not booted since then! I contacted apple and it seems that I will loose everything. I upgraded to Tiger and used that disk utility-it was "green" but when I went to try to do an archive and restore, it did not give me that option (unfortunately). Why?
Is it possible that the update extended me over the 10% needed for the system to work properly? If so, what can I do to save my files?
powerbook g4 Mac OS X (10.4.1)you could try to preserve your files using firewire target disk mode if you have access to another mac with builtin firewire and some space on the hard drive. this article outlines the procedure. http://docs.info.apple.com/article.html?artnum=58583
Maybe you are looking for
-
Exchange 2010 Decommisioning a DAG member from a 3 node Dag
Hi Guys, What the safest way to remove one server from a 3 Node Dag. Currently I am planning the following steps:- Remove Exchange server MAIL03 from DAG 1.Start up Exchange Management Console 2.Go to Organization Configuration > Mailbox > Database M
-
i dont want a discussing I want this fixed !!!
-
Improve image quality of VI when published on Internet
I'm using LabVIEW 6.02 and are publishing VI on the Internet. When I do that and are viewing them with the browser Explorer the grafichs details is bad. I have set the quality to be 100 and tried both png and jpeg format!Is there other things that I
-
Ok it finally had to happen.... My client need to upgrade their accounting system to Sage Line 200 which is MS-SQL based. We've discussed options like running GW for email but really for 15 people (ALL need Line 200) - they can't justify having 2 ser
-
60i to 50i conversion, but not keeping original length?
I'm sitting here with the raw footage for a music promo. Half is shot 50i, half is 60i. I need to end up in PAL, so I'm trying to figure out how to convert the 60i stuff to 50i. As all the 60i material has to be slowed down anyway, so I don't want to