Macbook numbers 2.1(436) will not open the project from Numbers APP on iPad 2.1(1129) . The error is "index.html is missing"

I updated the numbers APP on my iPad to 2.1(1129) and my Macbook numbers 2.1(436) will not open the project. The error is "index.html is missing".
I think I am having compatibility issues also with my numbers files but the symptom started last week. I have a numbers project/file that has been shared between my iPad and Macbook for several months so I would believe there is no compatability issue with the content. I updated the Numbers APP on my iPad to 2.1(1129) and my Macbook (numbers is current) on 2.1(436) will not open it. I used email the iTunes to transfer the project file. The error is "index.html is missing".
I used ftp to get both a previous file that will open and the new one that will not open onto a server at work and unzipped them. The file format is very different. Indeed the old one has an index.html and the new one has an index directory with a set of files. I know that you can not believe everything you read online but I did see a blurb that Numbers 3 does not need the index.html file but has no other specifics on the files format.
Am I a victim of the 2.1 verson on my iPad not being compatable with the 2.1 version on my Macbook?
Am I now forced to buy a new iWorks or Numbers 3 becasue I updated the iPad APP?
I wanted to find the answer before I purchased a new Numbers if that was not the problem.

Thank you for the insight that the new iPad 2.1 version requires Numbers3 BUT that is not a conclusion I would have jumped to being both are 2.1? Go figure.
You however I do not believe you are correct with the conclusion that I can get a Numbers upgrade. I am on OS X 10.6.8 so not only do I need a new OS, I need a new macbok to run it, according to the APP store it requires OS X 10.9 or greater.
I would like to have known that Numbers 2.1 iOS is not compatable with numbers 2.1 OS X and not taken the APP update.

Similar Messages

Robo HTML 9 will not open our project from Source Control after initial start.

We have a project in version control that we have been using forever, since 2003 or so and many versions of RH. Now that we have upgraded to 9, this project will open the first time in version control and work normally. Once you close the project and attempt to reopen from the starter screen, it opens just great, just not in version control. The files are still set to read only. I have done this several times and the only way i can work on my project in version control is to act like i am opening a project from scratch, then it needs to overwrite all of my local files with the server files. It would not be so bad but I am 3000 miles away from the server and 13 hops plus a slow firewall on the other end. While this has never been a problem in the past it is a big problem because it takes hours for all the files to download and overwrite my local files.
This only happens with RH9 and Version Control 3.1. RH8 works no problem. So, I don't know if this is a RH9 starter problem or a Source Control Problem. Maybe I will make a similar thread in the RH area. I'll wait to see if I get any useful hits from this one first.
It is very strange, I had RH9 open for several days because I was afraid to close the project for this reason and yesterday I published for the month so the heat is less right now but today, it opened with no source control. If I go to Source Control the only thing i can select is put project in source control. That is how it got into source control after converting to RH9.
We have another project that seems to open from version control normally but we can only save topics in HTML view. No useful answers to that topic after a week.
Got any ideas???
I have tried different folder names, different paths, etc.
Thanks,
dv

Ok, here is a wierd one, I used the add to version control icon in the menu bar, It already knew the path so I figured I'm the only one who has been editing these files for the past few days so I clicked add to version control. It added it. I closed and reopeded and still had the same files checked out. Closed, checked in all, then reopened and it is working in SourceControl. Strange that after opening from source control and closing that you need to reopen and tell it to put the project into source control. Obviously some flag is not getting set somewhere. This might help others having problems reopening source control files.
dv

HT6114 I have upgraded to OS X Mavericks and my MacBook keeps crashing and my numbers and pages programs will not open as they are being updated continuously.

I have upgraded to OS X Mavericks and my MacBook keeps crashing and my numbers and pages programs will not open as they are being updated continuously

The next time the crash happens, note the date and time the problem occurred, then go to Applications/Utilities/Console and copy the log starting at the time of the crash. Paste the log in a reply. Please do not use a screen shot as they can be hard to read. If there are repeated runs of the same messages, please post only one run. Be selective about what you post and don’t post huge amounts. Make sure there is no personal data visible. Information learned from Linc Davis.

Iphoto on my used mac mini will not open my photos from my new macbook air, it says to update software but there arent any available.. please help

iphoto on my used mac mini will not open my photos from my new macbook air, it says something about updating the software, but i checked and there arent any updates available... please help

Sorry for the second post..
I currently do not have an older version of iPhoto to test this on, but you might also try coping the Originals from the iPhoto Library of iPhoto 11.
To do that;
1. Right (control) click on the iPhoto Library in the Picture Folder on the MacBook Air
2. Select Show Package Content.
3. Click on the Originals Folder
4. Navigate to the disired Event or photos and copy those images to your Flash or External Drive, then copy those to the older version of iPhoto.
Beware do not move, add or delete anything in the iPhoto Library, Apple has intensionally hidden it in later versions to prevent people from messing things up.

I have installed max os x Lion on my MacBook pro, but now safari Will not open any internet pages

I have installed mountain Lion on my MacBook pro , but now safari Will not open any internet pages??

Try this:
1. Go to Safari > Preferences > Extensions
Disable any extensions.
Restart Safari and test. If that doesn't work, try this:
2. Create a new location and renew the DHCP lease. See here for the procedure:
http://osxdaily.com/2012/08/02/fix-os-x-mountain-lion-wireless-connection-proble ms/

Photoshop CS5 will not open raw files from Nikon D810. What do I need?

Photoshop CS5 (bought in 2011) will not open raw files from Nikon D810 (bought in 2014). Is there a patch? Is there something I can do?

YAY!!! Success. Thanks Jim. I have the raw file for this image. ABC OPEN: Dancing water spouts in severe weather I'm such a noob, I hadn't even set up the correct date on the camera.
ABC OPEN: Dancing water spouts in severe weatherFran McFadzen captures a once in a lifetime photo of two dancing water spouts near Rockhampton.
View on open.abc.net.au
Preview by Yahoo
From: JimHess <[email protected]>
To: Fran McFadzen <[email protected]>
Sent: Monday, 26 January 2015, 10:20
Subject: Photoshop CS5 will not open raw files from Nikon D810. What do I need?
Photoshop CS5 will not open raw files from Nikon D810. What do I need?
created by JimHess in Adobe Camera Raw - View the full discussionThank camera requires Camera Raw 8.6 which isn't compatible with Photoshop CS5. But you can download DNG converter 8.6 or newer and create digital negative (DNG) copies that will be compatible with Photoshop CS5. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7130665#7130665 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7130665#7130665 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Camera Raw by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Iv just installed cs6 and it will not open raw files from canon 5d111?

iv just installed cs6 it will not open cr2 files from my canon 5d111 ?

update your adobe camera raw files.
windows: http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows
mac: http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh

Firefox will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

Can you attach a screenshot or link to the instructions you are following?
You are on the 3.6 release and Firefox 7.0.1 is out. You can download and install the latest release from http://www.mozilla.org/en-US/firefox/new/ if you would like to update now. The 3.6 version will be maintained for a while longer, but you should update when you can.

I have a 27 inch iMac with maverick os. my current version of iMovie (10.0.6) will not open older projects i created in iMovie 9.0.9. I can find the projects and they have a ".rcproject" file extension

I have a 27 inch iMac with maverick os. my current version of iMovie (10.0.6) will not open older projects i created in iMovie 9.0.9. I can find the projects and they have a ".rcproject" file extension

Thank you GeeD. I'm still stymied.
I have moved the Event and Project Folders to the "top-layer of the drive" as the instructions state, right alongside the System Folder, Users Folder and Applications Folders.
When I open iMovie 10.0.8, the Events and Projects Folders are empty:
When I select File/Update Projects and Events, I get an alert box that says iMovie couldn't find any:
Not knowing exactly what is meant by the "top layer" in the instructions, I moved the Events and Project folders back inside the "Movies" folder where I found them (but then not where I would call the "top" layer, but rather "iMac/Users/Home/Movies/iMovieProjects". Then I tried to "Update Projects and Events" and received the same alert: "iMovie could not find any projects or events to update."
Then I tried to update iMovie 9.0 (iMovie '11 version 9.0 (1073)) to version 9.0.9 .
[As an aside, the nomenclature of iMovie drives me nuts. The latest version is 10.0.8, which us newer than iMovie '11.]
Back to the update of version 9.0 to 9.0.9.
Presumably because I have version 10.0.8 installed, I got this alert box:
So, I cannot update version 9.0
and I cannot "Update" the Events and Projects created in version 9.0.

Acrobat Pro X will not open today. I used it a few weeks ago, and the rest of my CS6 Suite of programs are working. How do I get Acrobat Pro X to work again?

Acrobat Pro X will not open today. I used it a few weeks ago, and the rest of my CS6 Suite of programs are working. How do I get Acrobat Pro X to work again?

Please refer
Doesn't launch after 30 days | Installed as part of a CS6 suite

TS2518 I upgraded to Aperture 3.4 this morning, and now it will not open at all! It crashes every time, and tries rebuilding the library and repairing most times. The Library open fine in Iphoto

Every time since I upgraded this morning, attempting to open Aperture causes a crash. I upgraded to Aperture 3.4 this morning, and now it will not open at all! It crashes every time, and tries rebuilding the library and repairing most times. The Library open fine in Iphoto

If you do not have the original install DVDs, use the Aperture Trial installer instead:
Try if this download link for the trial version still works: if yes, you can unlock it with your serial number:
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
Regards
Léonie

Hi, I have recently updated my OS X to Maverick. when I did, my mail programme (Mail) will not open - for me only. There are 4 other users of the iMac, and they don't appear to have any problems.

Hi, I have recently updated my OS X to Maverick. when I did, my mail programme (Mail) will not open - for me only. There are 4 other users of the iMac, and they don't appear to have any problems.

First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop for now...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

I have the newest Ipod touch. It will not let me delete third party apps. When i hold down the app I want to delete it starts wiggling but there is no X. How do I delete the apps?

I have the newest Ipod touch. It will not let me delete third party apps. When I hold down the app I want to delete it wiggles but there is no X. How do i delete the app still?

I'm having exact same issue! Just upgraded my son's ipod touch to iOS5 and now can't seem to delete any apps from the iPod springboard. Please help!

I have an iPod touch 4g. Has all recent up dates but it will not me sync music from my library too my iPod icon at the top of the page.. Plz help

I have an iPod touch 4g. Has all recent up dates but it will not me sync music from my library too my iPod icon at the top of the page.. Plz help
this also happen with my iPhone 4.. I've used the same laptop for both and same iTunes account x

What exactly happens when you try to sync?
Does iTunes see the iPod?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
If so have you done anything like update iTunes on the computer since it last successfully synced?
Do the songs play in iTunes?
Does any media now sync to the iPod?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method
Managing content manually on iPhone, iPad, and iPod

I recently switched from an iPhone to an Android phone. I cannot receive text messages because Apple will not "release" my number from iMessage. I see others have had the same issue. How did you solve the problem, if you did?

I recently switched from an iPhone to an Android phone. I cannot receive text messages because Apple will not "release" my number from iMessage. I see others have had the same issue. How did you solve the problem, if you did?

This tech note addresses your problem: iOS: Deactivating iMessage

Macbook numbers 2.1(436) will not open the project from Numbers APP on iPad 2.1(1129) . The error is "index.html is missing"

Similar Messages

Maybe you are looking for