Macbook only boots with black screen along with a load of jargon

--------------------------------------------------------------------------------
I installed a java and an intel secuirty update on my macbook pro after that i etsrated my mac and it was then taking ages to boot back up and then afte a while a black screen appeared with a load of jargon on which said the following
Launchd:com.apple.ni.blindd: Exited abnormally: Bad system call
Launchd:com.apple.ni.blindd: respawning too quickly! throttling
Launchd:com.apple.ni.blindd: 3 more failures without living at least 60 seconds will cause job removal
Launchd:com.apple.ni.blindd: will retart in 10 seconds
mDNSResponder-108.6 (Jul 19 2007 11:41.28)[153]: Starting
Launchd: com.apple mDNSResponder: exited abnormally: Bad system call
Launchd:com.apple.mDNSResponder:Launchd:com.apple. syslogd: exited abnormally: Bad system call
Launchd:com.apple.mDNSResponder: 2 more failures without living at least 60 seconds will cause job removal
Launchd:com.apple.mDNSResponder: will restart in 10 seconds
Launchd:com.apple.syslogd: exited abnormally: Bad system call
Launchd:com.apple.syslogd: respawning too quickly! throttling
Launchd:com.apple.syslogd: 2 more failures without living at least 60 seconds will cause job removal
Launchd:com.apple.syslogd: will; restart in 10 seconds
Launchd:com.apple.KernalEventAgent: exited abnormally: Bad system call
If anyone can make sense of this or has had happen before. any ideas on what it means and help on solving this problem
Thanks

Hi Spongeofthedead
did you get this problem solved, my macbook is doing exactly the same thing!!
all the disk repair etc does not seem to work..
i think i ve killed it any help would be very much appreciated..
cheers
gt

Similar Messages

  • Macbook Pro boot shows black screen with white text cursor

    Hello,
    I have a MacBook Pro 7,1 MC374xx/A running Mavericks.  My box has two internal hard drives in it.  One had the Mac OS installed to it, and the other has absolutely nothing on it.  I decided to give Boot Camp Assistant a try and chose the hard drive with nothing on it to install Windows on.  I also had an external USB DVD drive attached with the Windows 7 installation disc on it.
    So, next thing ya know, my Mac reboots and loads a black screen that says "Memory Overload." I take out the external USB drive and restart.  Then it said, "No boot devices found."  Now for whatever reason, it's just a black screen with a white text cursor.
    What the heck happened?
    I selected command R and confirmed that I installed Boot Camp on the right hard drive (the drive that did not contain my Mac OS).  Then, I completely erased everything from the drive with Boot Camp on it.  But still..black screen with white text cursor.
    I have no Time Machine backups available so I'm forced to reinstall the OS.  Any idea why this happened?  It seems I must have attempted to install Boot Camp improperly.  Any ideas or instructions on what to do now or how to install Boot Camp successfully on the Macbook Pro I own?
    Earnestly,
    Speck

    Boot Camp- Windows installation boots to black screen with blinking cursor.

  • Boot Camp: Early 2011 MacBook Pro boots to black screen with blinking cursor after windows 7 installation.

    I bought and downloaded the windows 7 ultimate edition 64 bit iso, then proceeded to perform a correct burn to a DVD one at the slowest speed and one at the fastest. all went well. so I open Boot Camp assistant and follow the instructions to the letter, downloaded the driver support to the flash drive. partitioned my drive with more than enough room 150 gb. its starts its install. I get through everything seamlessly where I put in my info all with the exception of my activation code. yet it still continues to finalize the install and does another restart. boots back up to either A. black screen saying press any key to boot to my install disk. B. if I take it out just a white curser. also I read it may be because I had the flash drive in while I was trying to boot so I removed it as well, same result. any input would be much appreciated.

    Boot Camp- Windows installation boots to black screen with blinking cursor.

  • Retina macbook pro boots to black screen

    I have a Retina MPB with SSD, etc. Recently after restarting my MPB, a FileVault dialog was presented - I clicked the "cancel" button. After this, my MBP has refused to boot past the initial Apple/grey screen, and instead, stays on a pitch black screen that displays only an active pointer cursor. Trackpad is responsive, as are all keyboard keys (they make the bonk sound after pressing many repeatedly).
    Sadly, nothing else -- I was able to reboot using "command+P+R" to the MacOSX Utilities screen, and no issues were found with my startup disk, but restarting once again resulted in the black screen that was displayed within seconds affter the Apple/gray screen went away.
    Anyone see this ever? And if so -- how do you resolve it???
    ~Douglas

    OK - next bit of discovery: I rebooted in SAFE mode (hold Shift while boot - which apparently turns off the graphics support) and it successfully booted...but returns to black screen on boot even after downloading and installing the new Retina Thunderbolt 1.2 software update that was recently posted.
    This had me recall one other recent "change" I made in attempts to have Aperture work a bit better/faster on what seems a very slugglish system...
    Really want this resolved asap --

  • My macbook wont boot up, black screen and the cd drive keeps making a constant sound. What to do?

    My macbook wont boot up. When I turn it on, the screen turns black right away and the cd/dvd drive keeps making a constant "ejecting" sound.
    The strange thing though is that once in a while starts up propperly, but suddely goes black again (after a min. or two), and the ejecting sound comes back. What to do, and yh, I've never done a back up so would it be possible to take out the HD and regain whats in there?
    Any help would be appriciated!

    Hello. Try resetting the PRAM and SMC first.
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/ht1379

  • My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.

    My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
    Will not show up in safe mode, will not show when started from Windows 7 DVD.
    I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
    Can see the PC volume from Mac side with files.
    I've looked at all the online solutions so far and have tried most of them without success. Please help!
    Specs:
    2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro5,2
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          3.06 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          6 MB
      Memory:          4 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MBP52.008E.B05
      SMC Version (system):          1.42f4
      Serial Number (system):          7302300GANE
      Hardware UUID:          B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
      Sudden Motion Sensor:
      State:          Enabled

    EDIT: RESOLVED
    For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
    Specifically, the posts by Dunsany and valkyr did the trick.  I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally.  I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
    Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again.  I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time.  Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black.  I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
    Hope this helps someone else!

  • MY COMPUTER ONLY SHOWS A BLACK SCREEN, WITH ONLY THE POP UP SHOWING .....VIEW AND TRACK YOUR DOWNLOADS

    MY COMPUTER ONLY SHOWS A BLACK SCREEN, WITH ONLY THE POP UP SHOWING .....VIEW AND TRACK YOUR DOWNLOADS

    Hi,
    First plaese unplug any external device (except the mouse and keyboard), then hold on the power button, perform a cold reboot, what is the result?
    If doesn't work, please press F8 (or other button, depend on your PC model) boot your compute into recovery console.
    You can restore your system to a previous point or perform a startup repair, please refer to the following link:
    What to do if Windows won't start correctly
    http://windows.microsoft.com/en-in/windows-vista/what-to-do-if-windows-wont-start-correctly
    Yolanda Zhu
    TechNet Community Support

  • Macbook pro only boot with R key

    I have a problem with a macbook pro .
    I have snow leopard and after running onyx my computer only boot with the R key pressed , I have tried option-command-PR , reset SMC , repair permissions without success .
    I have an external apple led cinema but with or without the error continues .
    Any help would be appreciated.
    Thanks

    Why did you try booting with the R key pressed? From what I recall that key simply resets the screen settings, and shouldn't have anything to do with your system starting or not. I would remove it from the external display until we can get this resolved.
    I'm wondering if it has something to do with your NVRAM. Try booting with this key sequence cmd-opt-n-v.

  • Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

    Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
     What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
    Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
    I have tried these:
    1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
    2. I tried putting back my old 2.5" and nothing but black screen.
    Thoughts and suggestions?
    Solved!
    Go to Solution.

    Hi Autoexit173,
    Welcome to Lenovo Community!
     As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
    As you have mentioned that the system not booting, please try to remove the RAM and  turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
    Click here for the steps to remove the RAM and refer page number 40.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • I don't know what's wrong with my 3GS. It only shows the black screen with white apple. Turning it on then off doesn't help.

    I don't know what's wrong with my 3GS. It only shows the black screen with white apple. Home button and turning the phone off then on doesn't seem to do anything.

    Thanks Lucas,
    I've tried doing that with no results. Same screen keeps showing. Maybe it'd be more helpful if I told you a bit more info.  My phone was randomly playing music, and the voice control would also suddenly start without me touching the phone.  Then I let the battery die and started to recharge when on the screen it indicated to plug into my computer/iTunes, I tried to restore but was getting an error message (can't remember what it said now). Battery died and now my current issue of the black screen with white apple.  I'd love to be able to restore my phone but now its not showing as a device on my iTunes. HELP! Any other suggestions?

  • My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

    My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

  • I mistakenly restored my ipod to industry settings and now I only get a black screen with the word IPod. Any ideas on how to get my apps etc back?

    My ipod went black. When I tried to sync it, I accidently retored it to factory settings and lost all of my apps etc. Now I only have a black screen that says I pod when I turn it on. Is there anything I can do?

    You can redownload apps an some other iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • While updating the firmware Update, i disrubted the download and now my macbook won't start up! Any suggestions on how to fix it? i only see a black screen

    While updating the firmware Update, i disrubted the download and now my macbook won't start up! Any suggestions on how to fix it? i only see a black screen and when i press the power button i hear the noise that it would make if it was going to start up. But i only see black.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • Mac Pro early 2008 boots to black screen

    Four times out of five, on average, the Mac boots to a black screen -- a 30" Cinema Display.
    I believe the computer is booting all the way up, because I have the front power button set to put the computer to sleep, and when I manually power down the machine using the power button, the Mac will go to sleep first.
    Also, the Mac will go into Firewire disk mode when connected to my MacBook.
    The "boot-to-black-screen" occurs from cold or warm boots.
    I've tried both 10.5 and 10.6 OS -- no difference, results the same on both.
    Here's what I've tried:
    Reinstalling and updating OS both 10.5 and 10.6
    Diskwarrior
    PRAM zap
    Pulling all USB and firewire peripherals off the computer (except the Apple Wired Keyboard that shipped with the PC) -- Mac promptly booted to black screen, so peripherals are not the issue.
    Changing displays (in this case, a Samsung 17") -- same result
    I have tried booting to the Apple Hardware Test on my commercial Leopard DVD and Snow Leopard DVD, but the machine will not boot to this (the Leopard disk will boot the AHT on other Macs). I no longer have the original CDs that shipped with the Mac.
    I've suspected the video card, but according to other posts, apparently this is not the cause.
    I'm now suspecting a motherboard firmware issue.
    Before this, the Mac Pro was having a related issue pertaining to VMWare Fusion, wherein the Mac would occasionally not wake from sleep, logging a VMWare Fusion kernel crash.
    For the moment, I'm not shutting down the Mac Pro, just turning off the Cinema Display. I've left this computer running for up to two months without a reboot, so I'm confident that it will stay up and remain stable.

    I'll watch to see if you get an answer. I have a late 2008 Mac Book Pro 15 with the same problem. It boots xp good every time. But I often need to use external monitor to gain control of the OSX boot. It gives tone, shows gray, shows apple and gear the short blue and then strait to black and front LED seems to indicate sleep. Very frustrating. Happens on both use best graphics and conserve battery display settings. Tried the reset pram, safe boot, save boot verbose. All no good.

  • My iMacG5 will only boot to white screen, gray apple and spinning gear. Help?

    My iMacG5 will only boot to white screen, gray apple and spinning gear. Help?
    Also not totally sure if it's an Intel based computer, but that's what I recall. Any way to check, since I can't get to About This Mac window?
    It's running on OSX Leopard 10.5.4
    First symptom = running slowly - then it kind of froze with color wheel spinning - thought a forced shut down would help - help power button til off, then white screen, gray apple and spinning gear.
    Have tried...
    1. Turn off the computer by choosing Shut Down from the Apple menu, or by holding the power button until the computer turns off.
    2. Unplug all cables from the computer, including the power cord.
    3. Wait 10 seconds.
    4. Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer.
    5. Let go of the power button.
    6. Press the power button once more to start up your iMac.
    Then try booting from your install disc again.
    - No change
    And...
    Booting From An OS X Installer Disc
      1. Insert OS X Installer Disc into the optical drive.
      2. Restart the computer.
      3. Immediately after the chime press and hold down the "C" key.
      4. Release the key when the spinning gear below the dark gray Apple logo
          appears.
      5. Wait for installer to finish loading.
    - The fan just got louder.
    Thanks for your help.

    You need to do an Erase and Install or an Archive and Install depending on whether the hard drive is OK or needs to be reformatted.
    Start by booting from your Leopard DVD. The rest is just following directions.
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Maybe you are looking for