Macbook only works with charger plugged in

Not been on my macbook for a week however I realised I left it on sleep for the week... When I have gone to put it on charge it won't charge up and only stays on if the adapter is plugged in?! I really need to get this sorted as I use it a lot for work and on the go

Have you tried resetting the System Management Controller? That is a good first step for power related issues such as this.
What is the status of your battery? Look in the System Profiler (Apple menu > About this Mac > More Info) under Power. If it says the battery needs replacing, you should do so.
Best of luck.

Similar Messages

  • Palm tx only works with charger plugged in

    My palm tx only works when plugged into ac charger.  Symptoms began after I left device unused for about 2 weeks.  When plugged in I get the battery charging symbol.  The battery icon says 100%.  As soon as I unplug charger, the device dies.  I have left plugged in for 2.5 hrs and still won't work when I unplug. I have tried hard reset with no improvement.
    Do I need new battery? 
    thanks
    Post relates to: Palm TX
    This question was solved.
    View Solution.

    One last ditch effort - plug in to the charger, and press the Reset button.  Let the TX go through a soft reset and let it charge for a few hours.
    If still no joy, then yes it sounds like your battery has reached the end of its useful life.
    Many places online will repair it for you, or let you purchase a battery and DIY.  Check out directfix.com for a repair video on the TX.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Playbook only works with charger or USB cable despite batter showing 100% charge

    After 2 years of faithful service, playbook only works with charger or USB cable despite batter showing 100% charge. As soon as the cable/charger is unplugged, it just switches off. When cable is plugged in again, and start button pressed, it reboots. I have reinstalled sftwer from scrathc via Desktop Manager, but the problem persists. I saw this problem raised in the fora several times, but never any explanation why it happens. Any ideas?
    Solved!
    Go to Solution.

    A high resistance between battery lead and motherboard would allow trickle charge but not power discharge.
    If you want to risk it, prise off the back of the playbook using an old credit card, locate the two screws holding on the battery lead, remove, clean up, then replace.  replace back carefully as the antennae connectors are pressure pads.
    Sarah.

  • BATTERY PROBLEMS: Laptop Only Works With Charger

    **My laptop now only works if it is connected to the charger. The second the charger falls out, the laptop shuts off.
    ** I have a white macbook..
    **Any advice??**
    Thanks

    I have a similar problem. Once i disconnect my macbook, with the battery charged, it stays one for awhile then it just shuts down. then i turn it back on and sometimes shuts down in middle of the start up screen =/. its like the random shuts are coming back or something...its really getting annoying.
    recalibrating or resetting the PRAM or whatever isnt gonna do anything

  • Computer only working with charger?

    My roommate spilt water on my computer which got onto my charger. At first it wouldn't do anything, now however, i can use my computer with my charger - but only with my charger- as soon as it's unplugged the computer turns off. What could be the problem? how can it be fixed? and what as an estimation of cost?
    Thanks for the help.

    Hello,
    You need to take the Mac in for service. We can't estimate the cost of such repairs here on the forums. Try and Apple store or an Apple reseller. If the charger was damaged in anyway from moisture, and you use it with your Mac, you could damage the disk, the logic board... and that would be more $$$$... have it looked at.
    Locations: http://www.mithrandir.com/AppleStoreLocationMapMarkers.html
    Resellers: http://www.apple.com/buy/locator/
    Carolyn

  • My sound says I have headphones plugged into my iPad, when I don't. Also sound only works with headphones plugged in

    I have tried turning my iPad on and off (3 times!!!), I have tried cleaning the headphone thing (where it's plugged in), and I have tried plugging in and unplugging my headphones. Please help me I am frustrated

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • MY MACBOOK ONLY WORKS WITH CAPS LOCK ON HOW CAN I FIX THIS?

    I CAN ONLY TYPOE IN ALL CAPS. IF I TURN CAPS OFF AND PRESS NUMBERS IT WILL TYPE OUT SYMBOLS, IF I HIT DELETE THE SAME WILL HAPPEN AND IT WILL TURN ON CAPS LOCK. IF I HIT THE VOLUME CONTROLS IT CLOSES AND OPENS RANDOM APPS. HELP ME PLEASE.

    Have you spilled anything on your keyboard? Sounds to me like your ALT key is stuck on. It's possible that the key is just stuck down, but if there's liquid damage, you may need a new keyboard unit.

  • What's wrong with my MacBook, it only works when its plugged in to the wall charger

    my MacBook only works when its plugged in with the wall charger. What's wrong with it? it the problem fixable ?

    Marina -
    What Kappy said, or maybe your Battery charging cable is faulty, or something's happened to the input slot.
    I'd take it to Apple and have them troubleshoot it for you. 

  • Mag safe adapter only works with certain macbook pros

    My Adapter is only working with other macbooks and not its own, It sometimes flics on for a second and then No go..
    I can charge with others...
    Solutions?? HELP PLEASE!!!!
    thanks!
    Dee

    Try SMC Reset
    http://support.apple.com/kb/HT3964
    PRAM reset
    http://support.apple.com/kb/HT1379

  • My sound on my MacBook Pro laptop only works with headphones.  How do I get the internal speakers to work?

    My sound will only work when I plug in headphones in the jack.  When I take them out, the volume button is on mute.  When I go into the sound preference it says Digital Out for the output.  Sometimes I get a red light when the headphone jack is at.  I have tried blowing in it and have put the jack in and taken it out numerous times to see if it will reset.  Nothing.  Any suggestions on what to do next?

    Go step by step and test.
    1.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    2. Reset PRAM.  http://support.apple.com/kb/PH14222
        Do this twice
    3. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:     "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Working with laptop plugged in?

    Apparently, it's bad for battery life to work with my Macbook Pro plugged in. I work with it plugged in after it dies from being drained, and almost ALWAYS when I play Sims3 because it brings the fan up because of the graphics use.
    Is it bad, good, or nothing at all?

    But in the unibody MBPs, the battery is quite effectively isolated from the major heat-producing components of the machine. Charging itself is the only operation that significantly heats the battery, and the charging process is controlled to limit that (which is why it takes a long time to charge the battery). When the battery is fully charged, charging stops, and the battery is allowed to remain cool until charging begins again when the charge level falls below 95%. So there is no harm at all in leaving the AC adapter connected 90-95% of the time. Just be sure to run the machine on battery power for an hour or two every day or two, as Apple says, "to keep the electrons moving."

  • NB520, Replaced display, only work with AC power, not work with battery

    Hi
    I just replaced a broken display on my 7 months old Toshiba NB520 and now it only works with AC power.
    The battery icon shows 52% but not charging.
    When I plug out the AC power, it turns off.
    Help

    Please help guys. I dont know what more to do...

  • My macbook wont work unless it plugged in

    my macbook wont work unless it plugged in to the charger, how much would this cost to get fixed

    you need to bring it somewhere to have it looked at to determine what is wrong with it.

  • Boot Camp won't make a Windows XP driver disc, OS X disc only works with Win7

    First time Mac user. Just got a new Macbook Pro.
    I have successfully installed Windows XP on the Mac using Boot Camp. But I need the driver disc. The right mouse button doesn't even work and Windows is impossible to navigate without that. The disc eject button does not work, one has to eject a disc using laborious menus. Very frustrating.
    When I run Boot Camp it only has the option to make a Windows 7 driver disc. I don't see any way to make a driver disc for Windows XP.
    Everywhere I have searched on the Net the information says to put the OS X Leopard disc in the drive when WinXP is running and it will automatically install drivers. When I try that a window comes up saying it only works with Windows 7.
    This web site shows screen shots of a Beta version of Boot Camp that makes Windows XP drivers discs.
    http://www.askdavetaylor.com/how_do_i_install_windows_xp_on_my_mac_using_boot_ca mp_1.html
    How can I make a Windows XP driver disc?
    I really hope Apple didn't discontinue/eliminate the option to make a Windows XP driver disc altogether, forcing everyone to use Windows 7 only...
    Is there a way to install an older version of Boot Camp over the latest version I'm running? Where would I find it?
    Macbook Pro
    OS X 10.6.7
    Boot Camp 3.0.4
    Thank you for your time in helping me on this.

    The retail OS X 10.6.3 DVDs unlike your OEM DVD does have a complete set of drivers for $29 w/o having to deal with questionable bitorrent.
    Microsoft EOL'd XP and Vista SP1.
    Your Mac has Intel Thunderbolt and you don't see Apple doing backward compatibility. You can't run 10.5 on new Mac. So yes it comes with those limitations, but XP is also 20x more vulnerable, IE9 is more secure and XP has not kept up with the latest hardware, besides which I don't see a place or need for a 32-bit OS, any platform today.

  • I had an iphone 4s and it worked nice with facetime and imessage using my phone number but  it was stolen on December so I buy a new iphone 4s using the same cellphone number  but now imessage and facetime does not work with my number, it only works with

    I had an iphone 4s and it worked nice with facetime and imessage using my phone number but  it was stolen on December so I buy a new iphone 4s using the same cellphone number  but now imessage and facetime does not work with my number, it only works with my apple ID.   Please Help me I speak Spanish so  if my English is not ok  I´m sorry about it.
    Do you think that apple has to   reset in their database of the old serial number attached with my phone number and that’s why I can´t activate imessage and facetime with my number in the new iphone 4s?? 

    I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more.  I am not always somewhere I can charge my phone.
    Your points are true; however it doesn't help me......

Maybe you are looking for

  • Auto-removing played podcasts from a smart playlist

    I'm wondering if anyone can help me figure out a way to do this. I have two smart playlists for podcasts. The first contains my favourite podcasts and they are removed from the playlist once they've finished playing. This works and I accomplished it

  • Fault message in asynchronous ABAP Proxy

    Hi, I have a question about fault messages in asynchronous ABAP proxy server. The configured scenario is SOAP – XI – ABAP Proxy. Between XI and the ABAP Proxy I have configured an inbound asynchronous interface with a fault message, and then I have g

  • F110-proposal

    Hi all, we are using ECC 6.0 version. I have configured for the app and trying to run the app program. 1) I have entered parameters 2) i have clicked on proposal then i got below mentioned message. Proposal has been released 29.01.08 17:09:02 actuall

  • Uninstall all CPAN-installed Perl modules

    A while back, there was a large perl upgrade which required rebuilding of manually-installed Perl modules. At the time, I did not take much of any action as I did not use any applications which depended on CPAN-installed modules -- all I did was to u

  • Variable  is used in description text Task description, but does not exist

    Hi, I am getting following error in the standard task 207914 ERMS_DECSN. Workflow Error Variable &REQREQ.REQUISITIONERUSER.ITSDESTINATIONSY& exists in description text Task description, but not in the container Message no. 5W146 Diagnosis Variable  i