Macbook optical drive same as MacBook Pro?

I have an optical drive from a Macbook that I want to put into my Macbook Pro. Is this the same drive?

Superdrives, yes, fixed many of them (Panasonic made)
1. Disc ejects after several seconds its a dirty laser diode lens (7 times out of 10)
2. ejects immediately its a damaged loader (also usually makes nasty loader arm noises)
VERY ODD you have 2 not working at the same time....
Your indication is a dirty laser diode lens on one and a damaged loader on the other (possibly,....online diagnosis is less than perfect)   
Fixing these is both fairly good news.
good news is a NEW one is only $40 if out of warranty (not including the cost of someone to install it for you)
Superdrive are a hair complex inside mechanically, .....fixing them is usually a "what for" for most part, since a new one is only $40
you have options for Apple to replace it or another if you are out of warranty (most likely)
if you have a mere dirty laser lens, this 'fix' is very simple.
Contact Apple about the cost to replace your Superdrive including labor.
Superdrive

Similar Messages

  • Retrieve data from a Hard Disk That was connected to the optical Drive of Mac Book pro

    Hi Experts
    I have been using a Mac Book pro from 2011 (Early 2011 Model), In the mid of 2012 I have planned to upgrade, and bought a 240 GB SSD and 16 GB ram from OWC, Installed successfully and bought another 750 GB WD Sata Disk and connected it to the Optical Drive Bay of the Laptop, using the optical drive as an external device now
    I was using the SSD as the main disk for all the applications and OS itself, and tranferred all the user library (iTunes Library, iPhoto Library, Documents etc..) to the additinal 750 SATA Disk,
    Last week the Mag Safe cable has been worn out and seperated completely from the adapter, I tried soldering the cable again and it was working for two days, third day The machine stopped charging and it was working until the battery run out of charge,
    Now I have bought a new Mag Safe Charger for 108 Singapore Dollars and it wont charge, read in iFixit Forums to change the Mag Safe DC in Board, so found a new part in singapore and replaced DC in Board myself, after doing this when I connected the new mag safe adapter, it fired the cpu fan for two second, I was able to see the green light the adapter and it stopped again and the green light wont lit up now
    Removed the logic board from Laptop completely and tried connecting the Mag Safe Adapter I can see the green light,
    So with all the above details, Iam confused whether its the Logic Board or the Battery that is giving me issue, I can find out the problem by contacting a Authorised service centre, but Iam thinking whether its is worth to repair it or buy a New Mac Book Pro ?, Because if I need to change the logic Board need to spend 900 Dollars + 100 dollar service charge
    So I was trying to remove the 750 GB WD Sata Disk to see if I can get the data back so I can buy a new Laptop without worrying,
    The real issue now is when I connect the 750 WD Disk using a sata to usb converter cable to my official macbook, it says the connected USB device is drawing more power than expected and it wont even detect the hard disk, Iam wondering why it cannot detect the hard disk even in the disk utility, is there any way to get the data back from the 750 GB WD Sata disk (which was connected to the Optical Drive Bay)
    Your expert advice is much appreciated
    Regards
    Vinodh

    Welcome to the discussions!
    It sounds as if your disk was not correctly formatted to work with the Mac operating system. I suspect it was formatted in FAT32, which is primarily a Windows format. This type of format will not allow the disk to accept any files larger than 4GB. That's probably why you are seeing the crashes.
    Connect the drive to your Mac and open Applications > Utilities > Airport Utility.
    Click your disk on the left and click the erase tab on the right. You need to format the drive in +Mac OS Extended (Journaled)+. Formatting will erase everything on the disk.
    Then you could try the drive again attached to your AirPort Extreme to see if that will do what you want.

  • How do I rename the 2 optical drives in a mac pro

    On the Mac Pro (OSX 10.6.8), using Toast to copy a CD, I often find that the "read" phase assumes I am going to "write" to a disc in the same Superdrive, even though there are two of them. The superdrives both have identical names, so selecting the drive is guesswork.
    I've tried quite a few searches on both the Apple forums & Google, to find out if it's possible to rename these two drives (ie, in the same way that Windows allocates a drive letter to each).

    Nope.
    Once upon a time when ATA busses offered Master and Slave settings you could set one as Master, and Toast would automatically show that as the first optical drive on the list. It all went away once they went to cable select settings on the ATA.
    I had/have the SAME issue and it got so thoroughly frustrating that I pulled one of the super-drives, (Pioneer DVR-112) installed it in an external case and stuffed a used $5 DVD-rom drive from Goodwill in the second slot.
    (Actually, given how hard it is to find ATA DVD burners, you could do a lot worse than to put one aside for limited use. I'd give anything to get another DVR-112.)

  • 4 Questions re installing a second Optical Drive in a Mac Pro (Harpertown)

    For years I have owned and used a Sony DRX-810UL-T optical drive as an external unit with my Mac Pro "Harpertown" purchased on February 19, 2009. It was connected to the computer using the firewire cable and it worked correctly.
    Some Background
    Today it dawned on me I had an empty optical drive bay in the Mac Pro so I should move the Sony drive in there and eliminate a bit of the clutter on my computer desk. I read the section on installing optical drives in the little Apple manual that came with my computer but it only discussed a single drive installation.
    Checked on line and found several sources describing how to do this and a couple of YouTube videos also showing how to do this. (Oddly only one of the videos mentioned the need for plugging in the power cable).
    I made sure I plugged the cables into the proper units as both had helpful legends on them indicating which was for the top drive and which was for the bottom drive.
    After installation I powered up and found neither drive would appear.
    Checked the About this Mac item in the Apple menu and got confirmation that the system didn't see any drives. Opened the computer again and unplugged the Sony's power and data cables then closed the computer and fired up again.
    The original Super Drive again appeared and worked correctly.
    The Questions:
    1. Since the Super drive came with the Mac Pro and was in the top space can I assume it needed to stay there and not get moved to the lower space?
    2. Since the Sony DRX-810UL-T has the correct connectors does this indicate this drive can be used with the Harpertown Mac Pro?
    3. If it can, did I miss setting some jumpers? I noticed both drives have one jumper in place but each appears to be in a slightly different spot than the other.
    4. Since the Sony drive worked correctly with my current OS (10.6.6) using the firewire cable can I assume it does not need a firmware update to be used internally.
    Wrap up
    Since the original Super Drive is working properly I am sure I did no damage to it or the computer. It would be nice to be able to get the Sony DVD drive to work internally, however.
    Thanks, in advance, to anyone who can offer some help with this situation.

    hatter,
    Thank you for this added information. Here's the current status of things.
    Just to check that the Sony drive would work internally I disconnected the superdrive (ata cable and power cable) and made the Sony drive the only drive plugging it in as if it was the top drive. The jumper for it was set to cable select.
    The Profiler found it and listed is in both the ATA section and the disc burner section.
    I checked the jumper on the superdrive to be sure it was also set for cable select and plugged both drives back in using the top connections for the super drive and bottom connections for the Sony,
    Again only the SuperDrive appears in the ATA list and and the disc burner list.
    I am beginning to wonder it the problem may actually be with the ribbon cable that snakes back to the motherboard.
    Since that cable has a set of dual outlets at the drive end and has them labeled for top and bottom, is it possible to plug in only one drive using the bottom connector as a test to see if data flows to the motherboard?
    Is it possible some part of that cable has somehow become disconnected at the motherboard?

  • Compatability of optical drive, PowerMac to Mac Pro

    I have a PowerMac G5 that I am no longer using. I now use a Mac Pro, I think it's 1.1. Would the SuperDrive from the Mac Pro work in my PowerMac? If so, how do I remove it? (I know how to put it into the PowerMac)

    Hi,
    G5s used IDE/ATAPI opticals, Mac Pros use SATA Opticals.
    Might work with the right adapter...
    http://www.walmart.com/ip/28879969?wmlspartner=wlpa&adid=22222222227019472865&wl 0=&wl1=g&wl2=c&wl3=55380887409&wl4=&wl5=pla&wl6=87884735889&veh=sem
    http://www.newegg.com/Product/Product.aspx?Item=N82E16812232004
    Optical drive removal/install on G5..
    http://eshop.macsales.com/installvideos/powermac_g5_opt/
    Mac Pro Optical drives...
    http://eshop.macsales.com/MyOWC/Upgrades.cfm?model=249&type=Internal%20Optical%2 0Drives&sort=pop

  • Optical drive trashed and MB Pro will not boot from USB image

    Hello,
    New here but I have searched and tried all I know to get this MBP working right again. My disk drive is trashed and has been for some time now, this is why I have a bootable version of Snow Leopard on an 8G flash drive. When my MBP began acting funny recently and I went to disk utility to verify permissions and the disk. Both failed = must boot from disk to repair, thus my issue. For some reason by MBP will not boot from the usb image I have used previously??? Pressing C or Option during startup does not work. If I press Option, I only get the harddrive option, C yields nothing and the computer boots normally.
    Please!! let me know how / what you would do to resolve this. I don't understand why I have previously been able to boot from this same file on the same drive previously to repair my disk / permissions but cannot do so now. FWIW, I tried placing the file (OSX) on my external HDD to boot from, this did not work either (USB HDD).
    Thank you in advance for your input!!

    It isn't clear what you mean about your HD being trashed or which disk (HD or USB drive) you are trying to repair, but either way you need to start up from your Snow Leopard installer DVD & instead of installing anything go to the Utilities menu & run Disk Utility from there to repair either or both of the disks.

  • Installing CS6 on a replacement hard drive (same Mac Book Pro)

    I am running the latest version of CS 6 on an older (2008) 15" Mac Book Pro (OSX 10.8.2), when I'm away on assignment.  The original 200GB hard drive needs to be replaced and in preparation I've cloned the complete system onto an external hard drive.  I'll be replacing the original hard drive with a larger (1TB) version and can clone everything back onto the newly installed hard drive when it arrives.  But in the "test" I tried today, PS CS6 would not open.  How do I go about installing my legally obtained and paid for copy of CS6 onto the new hard drive?  Do I de activate the present version, then download a copy to the new hard drive and activate it that way or will that be seen as a third machine, since I have one copy on a desk top and once on the old hard drive in the Mac Book Pro.  I just don't want to loose a CS6 activation?
    TYhanks for any wisdom on this
    David

    Do I de activate the present version, then download a copy to the new hard drive and activate it that way
    Exactly. All Adobe programs must be properly installed for the licensing system to work. If you have trouble and get warnings, call support to reset activations.
    Mylenium

  • How do I install a program on my MacBook using my desk top's optical drive

    I want to install Snow Leopard on my MacBook using the optical drive of my Mac Pro.  How do I set up the computers to do this?

    DVD or CD sharing: Using Remote Disc
    http://support.apple.com/kb/HT5287     <<< click here.

  • Won't power up -- 17" MacBook Pro Early 2008 2.5GHz MB166LL/A MacBookPro4,1 Apple Model #A1261

    I have a 17" MacBook Pro Early 2008 2.5GHz MB166LL/A MacBookPro4,1 Apple Model #A1261. I bought this used last year, and installed one of OWC's 1TB 2.5" Hybrid HD/SSD drives in it last January. No problems whatsoever until the past 2 weeks, when I started having intermittent black screens (NOT display sleep) -- sometimes the black screen would disappear by itself, sometimes I had to (Power button) shut down, and when I restarted, everything was OK. Until yesterday.
    First let me note that, because I usually use the MacBook Pro in the same area in my house, I usually leave it plugged into the MagSafe power cube, and often just close the lid and put it to sleep, instead of going through start-up every time I need to access it. BTW, battery (NuPower) shows 5 solid green dots and does not seem to be a problem
    Night before last, I shut down the MB Pro, and closed the lid. Yesterday, I opened up the MB Pro, and hit the power button. All I got was a brief, non-pulsing white light on the display-locking/“sleep light” button, and a sort of graunchy whisper from what sounded to me like the optical drive, NO screen activity whatsoever, and the “sleep light” went out within 3 or 4 seconds. Could hear NO HD spin-up sounds.
    Tried everything I knew (not much), including disconnecting the MagSafe charger and removing the battery completely, letting it sit a few minutes, replacing battery and charger, and powering up. Same nothing, just another very brief whisper of activity from the optical drive. Being something of an “I’ll try anything, no matter how dumb it seems” idiot, I put a known, working, burned data CD-R in the optical drive. Removed the charger and battery again, waited, put everything back in. Tried to power up. Still nothing, same brief whisper from the optical drive, but the MB Pro would STILL not start up, the CD-R wouldn’t spin up OR eject, and I heard nothing from the hard drive, even with my ear ON the metal right over the drive.
    My next “don’t-really-want-to-do-it” step is to remove the 1TB drive, replace it with the original 250GB drive, see if that works, and, as I have a “Newer Technology” Voyager S3 bare drive (works with both 2.5” and 3.5”) USB dock connected to my main Mac (a mid-2011 iMac, 2.7GHz Core i5, OS X 10.9.3), I’ll try using that to check the hybrid drive.
    I’ve been a Mac-only user since 1989, and somehow this doesn’t seem like a drive problem. I’ve tried every OS X keyboard shortcut on the “OS X keyboard shortcuts” page, and the “sleep light” always comes on for a couple seconds, then goes out, the screen never even shows a flicker of life, and the HD NEVER spins up.
    Can the forum please clue me in with any tricks I haven’t tried yet?
    Thanks
    Bart Brown

    Thanks for the quick response. However, none of the following have worked:
    Have you tried SMC and PRAM resets?
    As usual, "sleep" light briefly illuminated -- 2-4 seconds -- then went out. No startup, no chime(s), no screen, no keyboard illumination, no HD spin-up.
    Also try an Apple Hardware Test.
    Same as above. Nada. "Mac NoteBook and Desktop computers shipping with OS X 10.7 or later have a partition on the hard drive or flash storage that contains AHT" -- since I can't get the drive to spin up, I can't access that partition... or anything else.
    You may need the #2 installation disk.
    Well, there I have TWO problems:
    One is that I bought this MBPro on eBay, and received no disks -- it came with OS X 10.9.x installed (and is now at OS X 10.9.3). Is there any way to get “retail” install disks that will work with this MacBook Pro?
    Second is that there's a data CD in the optical drive. Because the MBPro won't boot, I can't get the data CD out even if I had the 2nd Install DVD. Any way I can get this data CD out -- hatpin, barbecue skewer, fencing foil, sledgehammer?
    I talked with OWC, from whom I bought the hybrid Seagate HDD/SSD 1TB drive last November. We tried a few ideas he had — mostly the same as those suggested by “Oglethorpe” (no relation to “Ogie” Oglethorpe in “Slapshot,” I hope!) — none of which worked, as I’ve already indicated above.
    My last-ditch effort-of-desperation is to remove the hybrid Seagate HDD/SSD 1TB drive, and put in the original 250GB drive (never throw away a good drive!), and see if the MBPro returns from the dead. I will also put the hybrid Seagate HDD/SSD 1TB bare drive into my Newer Technologies Voyager S3 bare-drive dock, which takes 2.5” and 3.5” drives, and see if there’s a problem with the hybrid Seagate HDD/SSD 1TB drive. While no longer under warranty with OWC/MacSales, it IS still under a 2-year warranty with Seagate.
    Any other suggestions gladly entertained.
    Thanks again.
    Bart Brown

  • Will my mac pro support 10 Optical drives?

    I have a mid 2010 Mac Pro that currently has two Optical drives installed. I believe its the Two 2.4GHz Quad-Core Intel Xeon E5620 “Westmere” processors. I installed a Samaung 840 Evo for the operating system and I have a 6 TB raid installed with 16gb of ram. I am going to be using it to burn dvds on location for my events. I have a high volume of customers and I really like to get orders out before the weekend is over.
    My question is can I daisy chain 10 optical drives to my mac pro? How do I gauge how much it can handle?
    And if you can give me a comparrison between that and the new mac pro that would be great. I know that the new model is going to be a lot faster and if my 2010 model can't support 10 drives but the new one can then it will be time to make a change!
    Thanks for your time

    So there are duplicators that have multiple targets? I have a 10 set duplicator already so when I have clients purchase as groups I can duplicate but most of our orders are specific to just one customer. So I have the duplication.
    My previous setup was 4-5 macbook pros all networked to a shared drive and I burned that way but our system is changing and we are putting the Mac Pro into play and so it would be easier just to have a set of drives all stacked in my road case instead of pulling the macbooks from other stations and then having to pack them up and etc. So if each drive could burn a differenct disc that would be great.
    I use toast and I read somewhere that you can just duplicate it and then from there I would label all of the drives to match the toast duplicate it was running from.

  • Can I use the 2nd Optical Drive Bay on my Mac Pro for an SSD?

    Since I have no plans to add a second Optical Drive to my Mac Pro in the Second Optical Drive bay, I was wondering if I could put an SSD in that bay using a 2.5' to 3.5" drive carriage. Is this possible? Would it work? Would I be able to use it as my boot drive? Never tried this, so not sure if it would work.
    Thanks in advance.

    Your 2010 model has SATA wiring in that bay, so the SSD plugs right in.
    Macs can boot from the drive specified in System preferences > Startup Disk.
    You would need an adapter from 2.5 size of the drive to the 5.25 (CD drive) size expected, but since there are no moving parts, most folks just dump the drive in there without a bracket.
    The biggest payback comes from establishing a Boot Drive with only System, Library, Applications, and the hidden Unix files including Paging/Swap. Putting the boot drive on an SSD is frosting -- it provides an incremental improvement over a spinning Boot drive.
    A caution when establishing your drive -- some users have killed brand new SSD drives by cloning onto them. The manufacturers have not been helpful in telling us why this happens, but a clean Install may be a better way to proceed.

  • Install second optical drive mac pro

    Although there are several support documents available from Apple on how to replace the hard drive and replace the optical drive in a Mac Pro, I could not locate a pdf on how to install a second optical drive. In this case, I wanted to add a Blu-Ray recorder to my mid-2010 Mac Pro. I found what I was looking for on YouTube: http://www.youtube.com/watch?v=vHjuKL2BS4Y This is a video by the reputable OWC (One World Computing) and its very easy to follow.

    Never mind
    http://docs.info.apple.com/article.html?artnum=304526

  • 2nd Optical-Drive for Early 2008 Mac Pro: Suggestions Required

    I am hoping to add a second optical-drive to my Early 2008 Mac Pro.  I notice that there are various SATA ones available for Early 2009 Mac Pro's onwards (e.g. the LG GH24NS90) but according to OWC (Other World Computing) these ones are apparently unsuitable for earlier Mac Pro's.
    The current optical-drive in my Mac Pro is a Sony AD-7170A.
    Can anyone suggest a suitable optical-drive that is still available as new (preferably available in the UK).
    Thanks,
    Yan Lee

    The SATA optical drives will work fine in a 2008 Mac Pro. I just installed this model:
    http://www.newegg.com/Product/Product.aspx?Item=N82E16827136259
    I already have a Blu-Ray SATA drive in my other tray, so I've done this a couple of times now.
    You have to run a SATA data cable through to one of the two ports on the motherboard - it involves removing the first two drive trays and the front fan. The cable goes up behind the top left corner of the compartment, together with the black cables feeding the optical ATA connectors. You CAN use an L-shaped (90 or 270 degree) SATA cable, but I've found that a regular straight cable works OK too - it is a tight fit behind the fan, but it should fit. The trouble with the L-shape is that it blocks the other SATA port. You can also look for low-profile SATA cables, which have slightly smaller heads.
    You'll also need a molex-to-SATA power adaptor. Don't forget to remove the front bezel from the drive - I do this by attaching everything to power, don't slide the optical enclosure back into the space yet, power up the computer, eject the drive using its eject button, and then slide the bezel up and off. You can then slide the enclosure into the space. Turn the computer off to put the fan and drives back in.
    Matt

  • Satellite M30 Pro: how to change the optical drive?

    Hi there,
    could anybody please give me a hand on changing/replacing the optical drive on my Satellite Pro M30?
    Alas, my drive is a DVD-ROM/CD-RW. I have another one with the capability of burning DVD's (Super-Multi drive from Matsu****a). I just wonder how I could replace them, since it os not possible to easily slide them out?
    Thank you.
    Jan

    Hi
    To remove the optical drive you need only to remove 2 screws which are placed at the bottom of the unit on the drive side. Then you can simply slide outward the drive to disconnect it from the connector on the system board.
    The drive is placed in the plastic frame. So you need also this frame for a new drive.
    To remove the plastic frame from the device you have to remove 4 screws.
    Bye

  • Optical drive won't open

    How can I manually open the optical drive on my Mac Pro? There is no paperclip hole that I can see. Thanks in advance.
    (I searched for this and found nothing. It's hard to believe it hasn't been asked.)

    Hmm, that's interesting. I'll have to try the "...eject" next time I have a burn session freeze on me. (You know, where it's supposed to be burning a DVD, but the burning application sits there and churns with the beach ball, but it's not really doing anything, and it never comes out of it.) Had to resort to rebooting in the past. Happens a few times per year, which isn't much considering how many I burn, but it's annoying when it happens.
    I was searching for this stuff because I used to use option-F12 (Logitech keyboard) to open the second drive, but it stopped working, possibly because of the latest Logitech software update I installed. I have the previous Logitech update if I need to revert, but the new version has some other nice features, so this workaround isn't bad. I always (literally, always) have a terminal window open anyway, so I just did a few quick aliases for my drive open/close/eject functions. I'd still rather have a quick single key-combo, but this isn't bad.
    It's tempting to write a little script-application that would figure out if it was open or closed and then do the opposite, but looks like the only drutil bit that might tell me that information is the "poll" option, and that keeps polling, so it doesn't self-terminate, so things get messy from a coding standpoint. It's probably not worth that much work to me.
    Thanks for the tip!

Maybe you are looking for