MacBook + OS X 10.5 + Freecom Network Disk -- No data shown on connect

Hello,
Since I use MacOS X 10.5 I cannot connect to my Freecom Network Drive 500GB via SMB anymore. Unter 10.4 it worked fine.
Now, OS X 10.5's finder shows the network drive and connects (Username "admin", PW: "my-password") but does not show any of the harddisk's content. It is also not possible to disconnect the networkdrive anymore.
(The same time under MS Windows the drive works fine)
Does anyone of you have the same type of problem?
Product: Freecom Netword Drive 500GB LAN & USB 2.0
Model Code: SHPABE
Firmware: NAS2891-009T3 LOADER 3.2

Hi,
This is not an answer to you question but you might be able to answer mine!
Before your problem did you successfully have the NAS drive working with a Mac and PC on the network sharing files, music and photos?
I'm looking to get a NAS drive and have the problem that my wife's laptop is running XP and I'm running OS X 10.4.11

Similar Messages

  • Auto connect to network disk

    Is there a way to set the network disk connected the USB port on the AIrport extream base station to auto connect on boot up?  When I shut down the iMac or reboot the shared network disk has to be manually connected.  Any help will be greatly appreciated.

    td - thanks for the reply. i will try it when i get access to the machines again. i initially did have sharing from the Users/Shared folder, and it worked great - except if someone edited something while the library was open on another person's computer. then the database would be corrupted and would only open on the machine that just saved it (which is odd). if library is shared from this folder, will iPhoto 8.0.2 give a warning message and prevent access as the apple doc claims?
    also curious - why then does apple say the sparse format is not required, but is recommended?
    +From the Format menu choose read/write disk image or sparse disk image (recommended).+

  • Sharing iTunes library between 2 computers and 2 iPods via network disk?

    Hi,
    Me and the missus each got a laptop -hers a PC and mine a MacBook.
    We both use iTunes and we've both got an iPod.
    Recently I bought an Aiport Express and hooked it up with a 1TB WD MyBook -is there any way that we can share our iTunes library via the network disk, so that we can 1. have full read/write access from both laptops and 2. both sync our iPods?
    Furthermore, is there a way for iTunes to monitor the music folder, so instead of me dragging music into iTunes (e.g. CD's that were ripped with other software than iTunes) iTunes would just update every once in a while, to check for new mp3's (kinda like Picasa does with pictures)?
    More questions most likely will pop up, but this is the most pressing ones.
    Thanks in advance
    /Jakob F.

    *is there a way for iTunes to monitor the music folder, so instead of me dragging music into iTunes*
    iTunes doesn't support folder watching, anything you add to a folder on your hard drive has to be manually added to the iTunes Library: Adding Content to iTunes
    You could have a look at this Applescript for folder watching on a Mac: Doug's Applescripts - Folder Actions and iTunes or this program for Windows: iTunes Folder Watch for Windows
    You'd need to do a deeper bit of research on both as I don't know if either would work from a folder that's effectively not on either computer

  • Time machine unable to access network disk

    I have a USB disk attached to my Airport Extreme, and use it as the target of my time machine backups from my mac book pro (connected via WiFi).  For the most part things work fine.  But if my macbook goes to sleep, after it wakes up it often (not always) gets the next time machine backup to fail with a message saying that it cannot access the disk.  At first I found a brutal method of correcting it: I would disconnect from WiFi, go to my AE and power cycle it.  After it came back the macbook never had any problem with the disk.  A little more exploration indicated that Lion wasn't unmounting the disk properly.  The following works (but sometimes requires a few iterations): I'll go to finder, eject the disk, and disconnect from Airport Extreme, and then go to the terminal and do
    sudo diskutil unmountdisk disk1
    (I first do a diskutil list to find out the right disk)
    and then ask time machine to backup again.  Many times I have to repeat this a few more times before it "takes".  Has anyone else run into this?  It clearly looks like a bug in Lion, since it never happened until I upgraded.
    Victor
    PS. I understand that Apple says that they don't support time machine backup to network disks.  But they do to a time capsule!  It isn't really different.

    I'm replying because, while I don't have a solution for you, I was experiencing the same issue at home not long ago. My solution has been to backup at the office (), but I'm about to switch back to running Time Machine at home. I think we'll be going through this together.
    The difference in my situation is that my backup volume lives in a PowerMac G5, but I'm sure it's the same error.

  • Network Disk Disconecting

    Hello,
    I have a new Core 2 Duo Macbook and just bought the new airport extreme, and I love it. However, there is a small issue.
    I plugged an external hardrive into the airport in order to share my music over the network. It seemed to work like a charm. I went into itunes and I did not even have to tell itunes where to look for my music, it automatically found it.
    The problem is that after I put new music on the hardrive, and then try to add it to my itunes library, the network disk disconnects. Then, when I try to reconect it it tells me the password is wrong. I have to go back through airport setup and set a new password for the disk, and then it connects again. The disk only seems to disconect when I go into itunes and select any music to "add to library." Any ideas what is going on? Thanks.

    I will try to make this a little easier to understand.
    1. I have a USB drive plugged into my AEBS and my Macbook CD2 sees the drive just fine and all the files on the drive.
    2. My iTunes library is linked to my music on this hard drive, and all my music plays perfect in iTunes.
    3. I add new songs to this networked hard drive, then I go into iTunes and click "add to library" and then I select the new songs.
    4. The network drive disconnects without any warning. When I go to disk utility and try to reconnect the network drive, it tells me my password for connecting to the drive is wrong.
    5. To get the drive to reconnect I have to go back into Airport Setup Utility and set a new password for the drive and then I can reconnect.
    6. This happens every time I try to "add to library" new music in iTunes, and this is the only time I have any problems.
    7. I have a MBC2D with the newest os x and iTunes version and I have the brand new AEBS with the 'n' capability.

  • Can't Get MacBook Pro and Mac Pro to Network

    I have a MacBook Pro (2008 - 2.5 Ghz. Core 2 Duo with 4 Gb of RAM running OS X 10.6.7) that I have been connecting to my Mac Pro (2005 - 2 2.66 Ghz Xeon with 20 Gb of RAM running OS X 10.6.7) through an Ethernet switch on my school's network. This has worked without a hitch for years, but when I upgraded to 10.6.7 recently, the MacBook and Mac Pro fail to network. On the MacBook Pro, the Mac Pro's icon doesn't show in the shared area, and on the Mac Pro, I can see the icon for the MacBook Pro, but when I click on the icon to connect, I get the message that "Connection Failed There was an error connecting to the server (name of my MacBook Pro). Check the server name or IP address, and then try again." I have tried a direct connect using the "Connect to Server" under the Go menu on both machines, using their IP addresses, but no luck. Is there something I need to re-set to get these two to talk again? I have other Macs on the same network that my MacBook and my Mac Pro can see, and both machines can connect to them. They just can't connect to each other.
    Thanks in advance for any ideas you might have on  how to fix this.

    I fixed the problem by re-setting the default values for my VirusBarrier X6 anti-virus program.

  • How to change my Macbook Pro's mane on the network ?

    Hi all,
    I trust your all well !
    Could you please help me ? I want to change my Macbook Pro's mane on the network, I mean when I check all the computers using the network, I always find mine named with its IP or "MACBOOKPRO-1FQC" and I would like to change to "Ben's MacBook Pro" or something similar. I tryed to figure out to do it but I din't find out.
    Thaking you in advance,
    Ben

    Go to System Preferences>Sharing and Edit the name of your computer:
    That simple.
    Clinton

  • Several computers sharing the music library stored on a network disk: howto

    Hi,
    We currently have iTunes set up on a (laptop) computer. The music folder location is on a network disk (NAS). Everything has been working fine.
    We recently purchased two more laptops for other family members and would like to set up the iTunes for those computers to use the same existing music folder. Is this possible? I understand that we must authorize all computers using the library to be able to play purchased music.
    So far we have synced all our ipods using the one and only computer. In the future each of us will use their own laptop for syncing. Will this cause any problems regarding to the shared music library?
    I guess that the playlists are stored in the itunes files, not in the music library. Due to this the playlists must be created on the new computers after the itunes installation.
    Best regards,
    ikl

    You are most of the way there. The only issue will be that anything done by one machine will not be automatically updated to others. Files deleted from NAS by one machine will not be available to others anymore leading to ! next to track names if in libraries on other machines.
    Files added by one machine will have to be added to the libraries of the other machines using 'add file to library' or 'add folder to library' options on menu.
    Podcast subscriptions should be only files that will duplicate on NAS. Podcast subscriptions are individual to each library even if stored to same location. The files themselves well get numbered. The library will know which file to use. This allows episodes to be deleted without affecting other users.

  • Hi, how do i stop my macbook pro not to automatically connect to a wifi connection that is not my preferred network? i want to automatically connect my macbook to my preferred network everytime i turn on my laptop. thank you.

    hi, how do i stop my macbook pro not to automatically connect to a wifi connection that is not my preferred network? i want to automatically connect my macbook to my preferred network everytime i turn on my laptop. thank you.

    System Preferences > Network > WiFi
    To give a network the highest priority, drag the name of the network to the top of the list. This is the network your computer will attempt to join first.
    http://support.apple.com/kb/PH13797

  • I have a MacBook Pro.  My mac can detect wifi.  But will not connect. I did get connected vis TCP/IP settings but I can't connect to any wifi anywhere.  Network diagnostic has a green light for wi-fi and wi-fi settings.  Red light for the rest.

    I have a MacBook Pro.  My mac can detect wifi.  But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere.  Network diagnostic has a green light for wi-fi and wi-fi settings.  Red light for the rest. (Network settings, ISP, Internet and server.)

    Hello NotAppleSavy,
    Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • How can I access photos on a network disk with apple TV ?

    I just bought a WD network disk to put all my photos. I wish to look at them with apple TV but can't find how. The only thing I see is what shared in my laptop Itune. Can't I just acces the content on network device without going through Itune?
    It should be easy as looking what's on the network and brows through the content!

    fouiiin wrote:
    I just bought a WD network disk to put all my photos. I wish to look at them with apple TV but can't find how. The only thing I see is what shared in my laptop Itune. Can't I just acces the content on network device without going through Itune?
    It should be easy as looking what's on the network and brows through the content!
    AppleTV2 does not support directly accessing media on network drives.
    All media viewed must be via itunes.
    If you can point iTunes to a folder on the network drive (Advanced>Choose Photos to Share) you maybe able to access them but only when itunes is running.
    AC

  • Macbook no longer detects Airport Express Network

    I've been using my macbook to connect to my Airport express base station for my home wireless daily for like a year now. Today however, my macbook refuses to connect to the network. After a few scans it detects the network, then when I try to connect it brings up the "this network requires a WEP password" which I put in, and then the connection times out on every attempt.
    I tried using the Airport Utility which fails to even detect the base station.
    Yes I've restarted my MB, yes I've restarted the express/modem. Thing is, I'm connected to the same network right now on my iPhone which doesn't seem to have any problem.

    Update: my macbook can connect to the wireless network at my university, but still not the airport express network.

  • What are the different ways to back up your photos from iphoto using a MacBook Pro which does not have a disk drive?

    What are the different ways to back up your photos from iphoto using a MacBook Pro which does not have a disk drive?

    Note - that no internet backup service has been proven to be safe and effective for backing up the iPhoto library - unless you personally have backup uyp an iPhoto library and restored it sucussfuly form one it should not be recommended - a large number of people have lost their photos trying it
    LN

  • Back to my mac will find my time capsule but wont find my macbook pro unless on the same network???

    I use a Macbook Air and I am trying to use back to my mac. Back to my mac will find my time capsule no problems where ever I am, however it will not find my macbook pro unless on the same network, for instance both machines operating on home network at the same time. Can anybody help???

    Looks like this has been fixed:
    http://discussions.apple.com/message.jspa?messageID=9733258

  • I Have a Macbook Pro that does not have a disk drive.  How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased.  I registered the S/N and I can't find the Free download anywhere only trials.

    I Have a Macbook Pro that does not have a disk drive.  How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased.  I registered the S/N and I can't find the Free download anywhere only trials.

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Maybe you are looking for

  • Need to convert a JFrame to an jinternalframe

    Hello, I have an application that is comprised of 7 classes. I'm attempting to rewrite it so that the one class that I have which is for the JFrame is converted to an internal frame so that I can add the complete application to the desktop pane of a

  • Copy values from stored procedure to a text pad

    Any Suggestions We have a table 'A' and wrote a select query to get the values from that table 'A'. I place this select query in Stored procedure and when I run that procedure every month the output should be sent t a text pad. Any suggestions how to

  • Anyone else notice a problem with VLC's interface recently?

    I have been using VLC for years without any notable issues. In the past month the interface has gotten very laggy. It takes longer to select menu items, and the  time slider bar is so unresponsive to be nearly unusable. All the other programs seem to

  • WAAS - Disk Space Error

    Hi all, Is this Syslog Error Message affecting statistics in % Compression? What is the cause of this ? It is tunned, or should be automaticaly resolved? Best Regards, Bruno Petrónio *** Output *** 2009 Jul 30 11:33:13 wae so_dre: %WAAS-RE-3-690464:

  • Cost center planning by functional area

    hi gurus, The client needs to do manual planning in CO (KP06) by cost center/cost element/fund/functional area. This data is later gets rolled up in FM to formulate the budget data. The client wants to enter all the account assignment manually except