Macbook OSX 10.5.8 - switches on, makes the usual noise - then screen goes black. Is it dead?! Can't try anything at all as it simply won't stay on. Had a new battery 4 months ago too.
My old macbook switches on briefly, makes the usual sound - then goes black and silent. It has occasionally switched itself off recently - but then come back on again after a moment a few presses of the power button. It has a new battery 4 months ago after the previous one expanded....Given I can't get it to turn on I can't try anything. Should I go straight to Apple Genius bar?
Hi. Are you running 10.5.8 and do you have the install disk? You could try a pram reset. Hold down Command/Option/P/R key on startup for three chimes and continue boot. If you have the install disk, you could boot to it then use the disk utilities off it to check or repair your drive and permissions. If you have a newer operating system you may have a recovery partition.
Similar Messages
-
my macbook boots up, I get a screen picture then screen goes blank...I get the start up sound, then a picture, then the screen goes blank but computer is still on..does anyone know what the problem is...do I need a new battery or am i just screwed.
Hello nosaint1961,
It sounds like you are unable to successfully boot your computer to your desktop. I would use the troubleshooting from the following article to help troubleshoot what is happening named:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Macbook early 08 starts then screen goes black
going to google
I had the same problem with mine MacBook never used gone back to Linux and freedom. Get rid of it apple is all overrated ijunk
-
I tried to update my phone, but it died so i had to restore it. The only back up i had was from 2 months ago. How do i get all the settings back from that huge gap of me not syncing it?
Please read before going through with this procedure.
If you really want your contact back and you did not do another iCloud backap since you deleted some of your contacts, you can do a hard reboot on both devices with iClouded contacts by holding down the home and lock buttons on each of them for 10 seconds ignoring the slide to turn off thing. Make sure you have iCloud contact services off before doing so. You can then go through the whole set up process until you get up to the backup part. You then press to restore from an iCloud backup (make sure you choose the right backup for the right phone). If you didn't make an iCloud backup before the contact incident, you will have to use your two-month-old iTunes backups. Each phone should have their contacts the way they were from your last backup. You then go into Settings>iCloud>and turn off contacts. You then can choose if you want to keep your current contacts or not. Turn this off on both phones just incase you add another iCloud device to the mix later on. Now your contact lists are no longer linked (Caution: side effect may include lack of edit button). You may now add and delete contacts as you please without it happening on your other phone.
Thank you for choosing Apple. -
Hi,
my macbook screen goes black at random points when I am using it. I know it is still running as music continues to play and I can vaguely make out the content of what is on the screen. Sometimes the screen will flicker between black and normal. Can I fix this?Emily..
Could be the graphics card, run the Apple Hardware Test
If the hardware test doesn't reveal any problems, use Lion Recovery. -
I just restored my iphone4 in iTunes ( after not syncing it for about three months) and it wiped all my texts and contacts and I think restored it to three months ago. It seems it erased all texts and recent contacts since three months. Any way of undoing this? thanks in advance, Greg
Only if you have a more recent backup with which to restore from - if you've only got the one from 3 months ago then you will be limited to what was on that.
-
my iphone 4s well not change. I had a new battery put in. when i try and plug it comes up with the low batter siqn
thebee88 wrote:
I had a new battery put in.
Who did that? I'm assuming not Apple, correct? Take the phone back to whoever replaced the battery & have them fix things.
Be aware: Apple does not sell iPhone parts or batteries, thus there is no legitimate source for such. -
When I try to start up my macbook, it makes the startup noise, but won't go any farther than the white/grey screen. I've tried the commands and nothing has worked. Please help
Hey marleyrose,
Thanks for the question. I understand that you are experiencing issues with your MacBook. The following resource may provide a solution:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Thanks,
Matt M. -
Can't get my remote to turn on my apple tv, I even put a new battery in and it still wont do anything
Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen. -
New (3mo) macbook air screen goes black and sometimes won't come back on after I unplug it from the power cord. Any ideas why it is doing this? Sometimes I have to hold power button for 10 seconds for it to shut off then back on. Sometimes holding the power button for a second is enough for it to come back on.
I took it to the Genius Bar, and they identified it as a hardware issue. Just got it back today. Parts replaced were:
620-5629 Display Module — Symptom: Distored/blurred/focus video issue
605-3284 Top Case with Keyboard — Symptom: specific key(s) do not work
So far so good. I'd suggest taking it in and not trying to work around it — it's a rare hardware issue (given the number of threads about it) and should be replaced. -
my macbook 15 inch wont turn on, it makes the hard drive sound and then a few seconds later it sounds like its powering down with like a clicking noise
Try Resetting your Mac's PRAM and NVRAM
If that doesn't help, try Resetting the System Management Controller (SMC)
If neither helped, boot from your install disc, run Disk Utillity. The startup disk may need repairing.
Using Disk Utility to verify or repair disks
Check the S.M.A.R.T. status at the bottom of the Disk Utility window.
Make sure it says: Verified -
Mid 2010 MacBook Pro crash - screen goes black
There is a major problem with the mid 2010 Mac Book Pro's and Lion. I suspect that it is related to the drivers for the NVIDIA GeForce GT 330M 512MB video card and perhaps the i7 processor. The crashes are random and most often occur after a mouse click then the screen suddenly goes black and a restart is forced. There is a thread on MacRumors that describes many others with the same problem: http://forums.macrumors.com/showthread.php?t=1182104
The crash occurs less frequently when the power and external monitors are connected. When the MBP is unteathered it crashes every 20 minutes. I am really surprised and disappointed that a bug this severe made it through final testing. Looking forward to 10.7.1.
Scottim so glad im not the only one with this problem. at least i know its not because some careless things i unconciously did that makes my mac gone berzerg like this.
i also encounter the exact same problem with all of you. problems started a month ago. at first it was just once in a while then it became a frequent thing especially when my battery left with 20-30%. then after i plugged in the magsafe, its okay. lately, nothing safes the mac from crashing, particularly when im running adobe and/or autocad. i thought it was software problems so i backed up my files, performed erase and install snow leopard then made an even bigger mistake by upgrading to lion. after finish upgrading, the crashings got even more often. every starting up, after i got a glimpse of login in, pufffttt, screen goes black but keyboard still on. googled it up and say reseting smc will do the trick. eeekkkk nothing! then resetting the pram. worked okay for quite some times then puufffttt, crash! ask a question on yahoo answers and got a help from lovely person to install gfsxcard-something and told to opt for integrated only. worked fine for 2 days and still went back to crashing. opened up the mac, testing each rams, reshuffling em, still got nothing. the only thing that enables me to do my work with this Majestic mac is resetting pram everytime i turn it on.
since im living in singapore (bought this mac june'09 in melbourne,australia), there is no genius bar to be found, running a diagnostic only at any apple service cost me 120 bucks and if i have to change the logicboard, its gonna cost me ard 1000++ dollas since i dont have any applecare and my warranty expired 4mnths ago. so, i might be killing myself soon! yauuzaaaa -
Macbook 2009 screen going black randomly
My macbook 5,2 circa about autumn 2009 (white plastic) keeps randomly going to black screen whether or not the power cable is plugged in. I've reset the SMC but no improvement. It sounds like the fan is running all the time too - and when the screen goes black, it sounds like the whole thing has shut down. After a short while it appears to wake up again.
This could be a sign of a failing drive. Considering the age of the machine, it's not unexpected. I recommend that you backup your data as a clone to an external drive in case of failure.
Both of these applications can be used to create a clone.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html
Apple just introduced the new MacBook Airs with a reduced price. Best Buy has been having sales with an additional discount. -
My MacBook freezes & the screen goes black!
My MacBook keeps freezing up and the screen goes black. It happens a lot when the computer "goes to sleep"--it will just go unresponsive. It's weird because even though the screen blacks out, I can still sort of see what is on the screen! The computer is always still running, it doesn't shut off. I have no idea what this means! Can anyone help me??
If this is a new MBP, then make an appointment at an Apple store genius bar and have them fix it for you under the warranty provisions.
Ciao. -
my iphone 4 stopped working.the screen went hazy a few times then white.tried a reset but now screens black and phone makes the charging noise every ten seconds when plugged in. any fixes. oh battery has 3.7volts constant
i solved this myself.a new digitizer and screen fitted .phone now ok..charging noise was to alert you that the digitizer had a fault
Maybe you are looking for
-
Cannot preview PDF in Designer 8.1
Hi, I'd just recently installed FoxIt (an alternative to Adobe Reader) to test compatibilities and what are the limitations. It's good for viewing but not for dynamic PDF or even extended PDF. It also seems that it corrupted the preview tab in the LC
-
What are ROWID and ROWNUM? Are they stored in database and where?
Hi All, can anybody please answer this question What are ROWID and ROWNUM? Are they stored in database and where? Thanks, Srini
-
Can't convert file keeps coming up with message "file failed to be converted using Adobe ExportPDF online.
-
I'm a convert from Windows, and I cannot figure out how to be able to find a specific word or phrase in a webpage or document. In Windows, I could use "control + f" to search for it within a document or page. Is there an equivalent for Apple? I a
-
Shorewall/Iptables REDIRECT error
Hello to all, I have a Shorewall Machine installed with 2 nics... But i cant use REDIRECT on /etc/shorewall/rules nor i can use mac address ( ex. loc:~00-A0-C9-15-39-78 ) .. it gaves me an error ..... $uname -a Linux Pride 3.2.8-1-ARCH #1 SMP PREEMPT