Macbook power adapater with Macbook Pro...??

Hi guys,
So I just got home for the holidays and realized I forgot my power adapter for my *Macbook Pro*. However, my dad has a Macbook. I know they're not the exact same adapter, but is it a problem if I use his adapter with my laptop?
Thanks!

If the battery is fully charged it will power it (or if it is not running it will charge it a bit slower than normal) e.g. the 60W will be enough to do one or the other.
Search here for the other 1000 times this has been asked.
Lower wattage = charge or run not both, higher wattage = both and in the case of a MacBook with a Pro adapter, it won't catch on fire (which is a common theme as people confuse power adapters with light bulbs in terms of power consumption).
Searching google will come up with 10,000 more confirmations of this.

Similar Messages

Power issues with Mac Pro (early 2009)

I have a problem that seems to be related to power issues. I have to disconnect the power cord for a few hours, then, I connec it again and turn on the mac. I have replaced the power supply (by a certified technician) and the problem seemed solved. Nonetheless I added a fourth disc drive and the problem presented again. I have two video cards a 20" cinema display and a 24" LED display (Apple) connected to a GT120. 10 GB RAM.
Every time I connect the computer there is an Inrush alarm in the UPS I have it connected to.
Does anybody else have had with this issue?

As Allan mentioned, the UPS is way too small for the task. I've seen mention of folks who have 1300's that are fine, but target recommendation (and what I plan to get soon) is 1500. Also, make sure you don't have a laser printer plugged into the same UPS.

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

Macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again

macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before

If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
Good luck - take the issue as high up the food chain as you can and see what happens.
Clinton

My Macbook pro keeps shutting down right after I log in. The power cord seems to be fine, so I think the computer has enough power. Right after logging in, it shows a grey background with a loading bar that loads only 1/4. Then it shuts down.

I have had my Macbook Pro since 2011 and it has been great until now. Suddenly, I can no longer get past the grey screen just after I log in. The grey screen appears with a loading bar, and the bar get 1/4 of the way complete, then the computer shuts off. My power cord seems to be working fine because this problem still occurred after using another power cord (from another Macbook). Keyboard does not light up, and the small green lights on the left side of the computer do not light up (this is an older version and these light indicate how charged the computer is). It is using the OS X Yosemite and recently had total clearing of the hard drive as it was transferring from one owner to another, so the hard drive isn't nearly full enough to be causing this problem. I've never run into this problem before with other Macbooks.
Help!

Hi. When you were in the recovery drive doing permissions, did you try and run a repair of the boot drive? Did you try single user mode? Try these first and then go back and try to reinstall the operating system.When I say repair boot drive I don't mean permissions. There are both options in disk utilities.When you open disk utilities ,you will see in the left column two drives plus possibly a boot partition that look like an external driv. click on the second drive and in first aid use repair disk. If you still can't boot and it will not let you restore, you may have to do a clean install. http://support.apple.com/kb/PH18869?viewlocale=en_US

My Macbook Pro loses power with battery down to 85%

I have had this problem for about two weeks. My Macbook Pro runs fine when attached to the power adapter, but when it is on battery power, no matter what applications I am running, the computer suddenly turns off after about 10 minutes when the battery reads about 85% charge. It will not restart until it is reattached to the power adapter. The computer is from about 2006 and has the original battery.
I ran diagnostics and it says the battery is working okay. I ran the utilities application to see how much CPU was in use, and it was only about 5% for all CPU capacity, and none of the running applications seemed to be using much of the hard disc.
I am planning to go to the Apple Store, I suspect they will tell me I need a new battery. Can it be tested at the Apple store out of the computer? Can I test it at home with my home voltmeter?

This is a sign of a battery that has reached the end of its life and needs to be replaced. Getting nearly nine years of use from a consumer rechargeable battery is a small miracle, congrats!

Hi! My macbook pro wont switch on at all, pressing the power doesnt do anything, when plugged it switch on to get the white background with the apple sign and a loading button that kept on forever. anyone has a clue?

Hello as mentionned before I cannot get my macbook pro to switch on.
when it is not plugged as I press the power button nothing happens, when the computer is power plugged, it gives me the white blackground with the apple centered and the loading button below but it keeps loading forever left it as for 4 hours and still nothing.
I have try to reset the SMC but didn't change much, now instead of the apple logo I get a circle crossed
My macbook is 1 year and 4months

See Gray Screen, try holding the Shift key upon boot
 Cheat sheet to help diagnose and fix your Mac
Drive may not boot, but if it's still working then data can be recovered
 Data recovery efforts explained
 Most commonly used backup methods explained

I have a MacBook Pro 2008 with 17 inch screen. Experiencing a lock up when turning on power to boot up. While booting up it goes to gray screen with Apple logo and disc spinning icon running and doesn't go to my desktop. Any solutions to the problem?

I have an early 2009 17 inch MacBook Pro that just went on the fritz. When turning on the power it will go into boot up mode to the gray screen with the apple logo, then the disc icon will be running and will continue running, not allowing to proceed to my desk top screen. It's pretty much locked up at this point where I have to do a forced shut down by holding down the power button. I've tried everything that I know of such as taking battery out and pressing power button for 5 seconds and then reinstalling battery. I've cleaned inside of computer with compressed air duster in can as well as other key commands for resets. I've read that this is a common problem with the earlier MacBook Pros. Is this a problem that I can fix or does it have to be taken in for service? Any solutions to the problem would be greatly appreciated. Thanks!

This could be a software/state problem or a hardware problem. Here are steps to resolve the former.
http://support.apple.com/kb/TS2570
https://discussions.apple.com/docs/DOC-5282

On my MacBook Pro with Retina Display, Why does the "USB Devices Disabled Unplug the device using too much power to re-enable USB devices" keep coming up after I unplugged the usb device?

On my MacBook Pro with Retina Display 15", that I purchased a few weeks ago, started coming up with the following message on my desktop:
"USB Devices Disabled Unplug the device using too much power to re-enable USB devices".
I unplugged the device and the message still keeps coming up.
This is what I have done so far to troubleshoot:
I shut down the laptop. When booting up I pressed the command+option+p+r at the same time. It comes up with a menu to reinstall OSX, Get help online, Run Disk Utility, etc. I choose the disk utility and repair the disk and then restarted.
The message keeps popping up and I can't seem to get rid of it. Why does the message keep popping up even though I don't have any devices hooked up to the laptop at all? Any help to reenable my usb ports and get rid of the messaage would be helpful.

I talked to Apple Support and we at least stopped the bleeding, a little bit. These are the troubleshooting steps I did before I contacted Apple Support:
1. Reinstalled OSX
2. Restore the last known good Time Machine Backup.
This did not fix my issue, so I called Apple Support and they told me this:
1. Turn Power off.
2. Wait 15 seconds.
3. Plug in Magsafe adapter.
4. Wait 15 seconds.
5. Hold down the Shift+Option+Power Button for 20-30 seconds.
6. Turn Power back on.
Ok, this stopped the bleeding a little, but as soon as I plugged in a Apple USB Superdrive
and a Apple Mini Displayport to VGA Adapter. This "USB Devices Disabled" pop-up pops up like every 30 minutes now. At least, it is not constantly popping up after I close it, so I guess it will do for the temporary. Going to contact Apple support, later, though to see what else can be done.

2011 Macbook Pro suddenly says no space available on start-up disk (plenty available) and USB drawing too much power (only charging phone). What's going on with my computer? No longer able to charge my iPhone 5.

Hi, all.
Two days ago I was using my computer, a 2011 Macbook Pro, and suddenly got the error message reading "Your Mac OS X startup disk has no more space available for application memory. To avoid problems with your computer, quit any applications you are not using. Closing windows and removing files from your startup disk will also help."
I was only using Google Chrome, nothing was running in the background, and I have 443 of 449.25 GB available (this is after clean-up I conducted after receiving the error message, but probably cleaned up less than 25 GB), so there should be no shortage of space. However, the message kept popping up and I deleted a few files and eventually it went away and hasn't reappeared.
However, last night and then again this morning I have been getting the error message that my USB drive is pulling too much power and has been disable. All that was plugged in was my iPhone 5 on the charger and my computer is also on its charger, so I don't know why this would be an issue, either. I have always charged my phone this way and never had a problem until today.
I haven't been able to charge my phone since. What's going on with my computer?

Regarding the USB, see if zapping the PRAM helps.
Regarding your storage space check out the following:
HD Space Checkers:
Disk Inventory X (FREE)
WhatSize (SHAREWARE)
OmniDiskSweeper (FREE)
GrandPerspective (FREE - donation)
Mac Performance Guide
Slimming your hard drive
===============
Quick fix How To Quickly Free Up Hard Drive Space on Mac OS
http://www.youtube.com/watch?v=fO-mlLApEuk

My Macbook Pro will not shut down, restart or sleep, with either Apple Logo at the top or the power button.

Hi, I have a 13" Macbook Pro with Mountain Lion, and I've had it for less than six months.
It has worked perfectly ever since I got it and I have been completely happy with it, until today. My computer's had a variety of problems; The screen has turned black three times now in the middle of me using it (actively typing or using the touch pad). After clicking some keys or swiping the touchpad, it comes back, but I cannot figure out why this is happening. The big problem, however, is that it won't shutdown.
I usually shut my computer down at night, and I was trying to today, but it just didn't work. I have tried shutting down by pressing the power button; no dialogue or question box comes up. I have tried shutting down from the Apple Logo at the top left of the screen; nothing happened. My computer won't sleep, restart or shutdown at all. When I close the screen, it goes darkens and lights up as usual, but it won't shut down! What's more, none of the options in the Apple Logo will work; for this post, I tried to see the About This Mac screen, and nothing happens. At best, the Rainbow Disc of Pain will appear and then just go away. The menu does pop up though when I click on it, my Wi-Fi is fine, the apps work, the keyboard's fine, the touchpad is great, everything works but that.
I have tried Command+Tab to see open applications; I have shut them all down till only Finder is left. I have tried click Force Quit, of course, nothing happened. Nothing at all, not even a dialogue box. I have tried emptying my trash, along with all the 'sketchy' applications. I have plugged my computer in, just in case. Nothing has made any difference and I am very worried!
I love my macbook pro, and have up to this point, but now I am extremely worried about it; all my important files are on it, and I have nothing to back up with.
Please, please, please, please help!
FYI; I have avast! Virus Database. I cannot imagine that that would cause a problem. Please help me!!!

Yay! Solved my own question; just did a hard shutdown, worked like a charm! Funny, didn't before. But who am I to question salvation?

HT2693 I purchased Huawei Dongle and trying to connect with my NEW MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support. When I plugged in my the power is flowing in dongle due green light blinking twice in every 3 sec but no

Hi,
I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
So please suggest proper direction to use it and provide link to install any driver.
Thanks
Tauheed Ahmad

Yes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and 3.0 knowledge. They handsUp that reason I posted my problem in this forum.
So is there any better solution to use any mediator between these USB version handling, Please let me know.
Thanks
Tauheed

My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Tim

My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
David

My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
David

Translucent impromptu possible "hacker" message interrupts current session, locks MacBook Pro screen and demands that I restart by holding down the power button of my LapTop to turn it off first. Any thought? Could this be another way to mess with us?

I was listening to a YouTube video on the history of X15 rocket airplanes. All of sudden, out of the blue a translucent back message drops top down, stops the video, locks up my MacBook Pro screen and demands that I restart my lapTop by first holding down my power switch, then turn the lapTop back on. This has never happened to me before. The message was in black & white, and in about 6 languages: English, French, Spanish, Dutch, Japanese, Chinese. Does any one recognize what this might be?
The Computer turned back on just fine as if nothing had Now I am freeking out that they could be reading my key strokes or something. Could they have used this tactic to install malicious software on my computer by first taking away my ability to do anything about it being that I am not a software engineer? Can any one think of anything simillar? I reported this as a bug to APPLE the regular way, then cleared my Safari cookies, then run software update which returned nothing new as in " your software is up to date at this time."
Can any one please help?
A-NmN.

Hi stedman1,
Thank you so much. This seems to make sense to me now. I was freaking out a bit that some hacker could be messing with my MacBook Pro. I will be monitoring this issue from now on as it has never happened before.
A-NmN.

I have new hard drive in macbook pro(08) and have SATA cable with external power source to old hard drive (10.5.8)via. USB port and newer drive(10.6.8) will not recognize older drive..Do I need to partition newer drive with older disk to recover data?

I have new HD 750GB Hybrid in 2008 Macbook Pro 17" w/ Snow Leopard 10.6.8 connected to old Hard drive(250GB that had 10.5.8 on it at time of failure) via SATA cable to USB port with external power source.. Computer not acknowledging old HD at all in Disk Utility or otherwise (that I'm aware of)..Do I need to partition New HD and load old(10.5.8) onto partition to recognize older drive for data recovery? Thanks Wayno08

You do not need to load 10.5.8 onto your new drive in order for a 10.6.8 system to see the contents of a 10.5.8 system.
You might want to check out the hard drive troubleshooting bootk in the downloads section of this web site:
http://scsc-online.com
They also sell a product named Phoenix that can do OS extraction and volume copying/cloning, but to be honest I don't know if it's appropriate in this case.
I would suggest the following:
Open up Terminal.app (under utilities) and type "diskutil list" without the quotes. This is the command line version of Disk Utility. If the external drive doesn't show up at all, then it's likely not connected properly, not getting power, or just plain dead. If it shows up with only a devce name like disk0s16 but no volume it means the drive is seen, the OS just can't make sense of it.
Assuming the drive shows up, I would try to boot off the original installl disks for the system and run Disk Utility from that. I'm assuming the drive will show up. You'll want to select the option to repair the drive and then perform the option to repair the permissions.
If the unit isn't showing up, as per step 1, try a different USB port. More importantly with your unit, try it on another side of the unit if possible. If you read the book I referenced above, some of those units have I/O boards that are separated from the logic board. If the cable from the logic board to the I/O card goes bad or has problems, which isn't all that uncommon, some or all of the ports on the I/O card may appear to be bad as well. If you use a USB port on another side, it would be routing out of a completely different I/O path, so that's a potential problem.
If the drive is only seen with a device name such as disk0s16, it's likely either the index files are corrupt beyond Disk Utility's ability to see them. The only thing that I think would help would be a product named DIsk Warrior, but I can't guarantee that.
Disk Warrior can be found at:
http://www.alsoft.com/diskwarrior/
The company that I linked in the first link above also makes a product named Scannerz that does HD and system testing. The Scannerz/Disk Warrior combination make a good pair because the complement each other....Scannerz does what Disk Warriror can't and Disk Warrior does what Scannerz can't. However, at this point I'm not too sure getting a tool like Scannerz would be of much use because it sounds like the damage has already been done.
Let us know what happens.

Macbook power adapater with Macbook Pro...??

Similar Messages

Maybe you are looking for