MacBook Pro 1,2 updated to Sno Leo with DVD. Now, further updates fail to install with "unknown error." Appreciate any tips.
Updated from 10.5.8 to 10.6. Runs great with 10.6, but none of the updater combo packages will run. Rebuilt disk permission, ran Disk Utility from installer and disk check good. Cannot figure out why the updaters won't run. There is no password enabled for the root user -- could that be a problem? Any suggestions appreciated.
Install this first.
http://support.apple.com/kb/DL1512
Then try installing the update to 10.6.8
Similar Messages
-
How can I get a better driver for my 1394b Hostcontroller in my Macbook pro 2010 to solve the problem, that it is too slow under Windows 7 installed with bootcamp ?
WIndows can't find a better one than the installed LSI Conformed 1394 HostcontrollerRead and follow the Bootcamp Installation instructions that you were offered to view when you ran Bootcamp Assistant.
Run Bootcamp Assistant again and select the option to download the Bootcamp Support software. Follow the instructions. Then boot into Windows and install the Windows Support software you downloaded and saved. -
Why doesn't my Apple wireless remote remain connected? It is frequently giving me a "lost connection" signal and since the touch pad works intermittently it has become frustrating.
Hi at eeze,
If you are having issues with your wireless mouse, you may find the following article helpful:
Apple Support: Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/ts3048
Regards,
- Brenden -
got a macbook pro. runs FFox 4.0.1
Daily i get prompt says "update FFox". I click it and it says"connecting to server" forever. have to close window. does this daily.got a macbook pro. runs FFox 4.0.1
Daily i get prompt says "update FFox". I click it and it says"connecting to server" forever. have to close window. does this daily. -
After updating my macbook pro (OS X Mavericks 10.9.3) it doesn't support a connection by bluetooth with my iPhone 4S. Why?
Hello Sergio V. Marciano,
The articles linked below provide some useful information and troubleshooting steps that can help restore Bluetooth connectivity between your Mac and your iPhone.
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Archived - Bluetooth Quick Assist
http://support.apple.com/kb/HT1153
Cheers,
Allen -
I have installed CS5 on a macbook pro 10.9.4. I am unable to get the updater to run to update applications to most current version. It tells me there was an error trying to download the update and to try again later.
Getting used to changes in the finder. I finally did see the Adobe Patch installer and am able to update applications individually. Should be able to attend to the main apps I use w/o further difficulty. Thnx for the help.
-
hi, i got Macbook Pro 2007, OS X 10.5.8, I would like to update my system, which one I should choose? tks
Mountain Lion is the current version of the latest OS, with Mavericks coming this fall.
However, I would suggest that you simply upgrade to Snow Leopard -> http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard. It's a very good, very fast OS and, best of all, it can still run those PPC apps that you may be using.
My 2¢...
Clinton -
I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectedly. iTunes microsoft word all of them quit unexpectedly. Help!
Exact same problem with my 2010 MBP 2.4ghz 4gb ram 10.6.8. iTunes said update was needed, Software Update ran with various updates including a security update, truthfully didn't pay much attention, I always install the Apple updates. After the restart it took 3-4 times longer than normal to get to the login screen, same to get to the desktop but I'm familiar with that occurring on update restarts. Unfortunately it got worse from there. Performed a full shutdown and startup. Same long boot. After the desktop finally loads every mouse button press received a 2 minute beachball. I use menu-meters and both processors are under 10%. Waited a few minutes for disk utilities to launch, repair permissions estimates 3 hours for a typical <10 minute process. Activity monitor shows nothing over 10% CPU most of the time however ReportCrash pops to the top often. Any suggestions would be greatly appreciated. BTW zero problems until this update.
-
Recently I needed to change my apple password on my iphone; now I can't get my email on my macbook pro and I have tried every permutation. How do I update my mbpro password?
If you didn't already do so, authorize your computer for the new ID by opening iTunes and going to Store>Authorize This Computer. Then sync your phone with iTunes.
-
Hello. I recently updated numbers on my macbook pro. I like the auto completion feature (proposing te word as I type). With this new update, I cannot see this feature and it doesn't work automatically. Can I have any help on this issue ?
This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl -
Last week I purchase a new MacBook Pro. Do I need to pay for the new OS update?
Last week I purchase a new MacBook Pro. Do I need to pay for the new OS update?
Select your category and you can check with your serial number whether you are eligible or not.
Qualifying purchases between June 06, 2011 and July 20, 2011
http://www.apple.com/macosx/uptodate/ -
I bought my macbook pro this morning. When I turned it on it led me through set up with voice over. I finally quit VO but my pointer is not working. It moves but does not open anything. Can anyone help?
ladislavfromcygnet wrote:
Thank you Shootist007. I cannot do even Update now. I probably should have spent the same amount of money on a new IMac!
No not really. If this is a brand new Macbook Pro take it back for a refund. Apple has a 14 day No Questions Asked return policy for Full refund.
Take it back, get the Full Refund (DO NOT LET THEM TRY TO FIX IT. YOU BOUGHT A NEW COMPUTER NOT ONE THAT HAS BEEN WORKED ON OR NEEDS TO BE FIXED) and then decide whether to buy another Macbook Pro or the iMac. Or you could return it, get the Full refund and buy some other brand computer. -
After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer. -
macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before
If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
Good luck - take the issue as high up the food chain as you can and see what happens.
Clinton -
My external monitor worked with my MacBook Pro before I took it on a little trip, now it won't work. Any suggestions?
Never mind. Sorry. It fixed itself.
-
How can I set up multiple spaces (desktops) on my new MacBook Pro 10.9.5? I have six set up on my other computer MacBook Pro 10.8.5 but can't find how to do it on this new one. Would appreciate help on this. Cheers.
It's not completely obvious. What you have to do in Spaces is to position your cursor to the upper right of the screen, after which faint + (plus) sign appears in that area. Click that, upon which another Desktop will appear.
The + may be difficult or impossible to see with some desktop backgrounds (black, for instance):
Maybe you are looking for
-
I downloaded the latest version and now firefox won't open at all on my mac laptop
Macbook Pro 10.6.7 Tried to download 4.0 - it is incomplete
-
Where is file sharing in iTunes 12?
Where is file sharing in iTunes 12? I used to click on the iPhone or iPad device, then select the 'apps' tab and then file sharing apps like VLC would show at the bottom. Now clicking on the device doesn't do anything.
-
Are sound controls not compatible with viewsonic 2703 monitor?
my mac mini is connected to a viewsonic 2703 monitor via hdmi. the sound controls in the menu bar are greyed out. Is volume control not compatible?
-
Problem to publish my azure cloud service
Hello, my goal is to deploy an exe on a web service then create a http client (c++) that uses that service. First I began with this tutorial http://azure.microsoft.com/en-us/documentation/articles/cloud-services-dotnet-get-started/ then I use this on
-
Problem in dynamic method execution???????
Hi, I am facing the problem in selecting the method at run time. I have a class with methods like myMethod1,myMethod2,myMethod3,myMethod4.... In my program I am receiving a parameter. for e.g. "2" Then I want to execute myMethod2. I am doing it this