MacBook Pro  1 year old - Which airport speed

Hi,
I have a MBP which is about one year old.
I noticed that the recent MBPs conform to standard 802.11n. Is this true for my 'old' MBP as well? Or is ist just 802.11g?
Erwin

Select About This Mac from the Apple menu. If it says Core 2 Duo then you have 802.11n available. Some earlier MBPs had these cards but not the software that could use the "n" protocol. Leopard has the appropriate drivers, which I see you are running already.

Similar Messages

  • Using Carbon Copy Cloner which is quicker firewire 800 Macbook Pro to external hard drive or Macbook Pro to same via Airport Extreme?

    Using Carbon Copy Cloner which is quicker firewire 800 Macbook Pro to external hard drive or Macbook Pro to same via Airport Extreme?

    Firewire 800 is the fastest and most reliable. Also it's bootable if you hold the option key down on a wired or built in keyboard.  Not bootable via Airport obviously or if Filevault is used.
    It's only your first clone that's usually takes the longest, it's shorter when it updates as you only do the changes which you can control to keep a pure clone if you wish.
    Most commonly used backup methods

  • I purchased a new MacBook Pro, and a 2TB AirPort router. I have a 2007 24" iMac that I have been syncing my phone on for years. Is there a way to network these 3 devices so I can sync my phone on my MacBook and access the iMac data?

    I am not familiar with networking in the least. I feel like, being as it is 2015, this is not an unreasonable request. Basically, I do not make much use of my desktop iMac anymore, other than as a backup computer and to sync my phones. My primary computer is my MacBook Pro. I'd like to make my MacBook my primary computer for downloading music, saving and editing photos and images, and syncing my phones, but i'd like to do so without clogging the hard drive on the MacBook.
    Basically, what I am hoping to do is network my iMac, and MacBook Pro through the 2TB AirPort, and sync my phone through the MacBook without losing all data (ideally, I'd like to be able to sync through either computer at will).
    Additionally, something like 100GB of images are stored on the iMac, and I specifically purchased the MacBook with the upgrades to do image editing on, but again, I don't know how to transfer the data to the AirPort, and I don't want to slow down the MacBook by storing all of the data on the laptop.
    Any help would be appreciated. Thank you very much.
    -Bryan

    Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac.  You should be able to set a password for it. Save it.  Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer,  I suppose,  back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity.  As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
    you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
    This handy article from Apple explains how
    How to move your iTunes library to a new computer - Apple Support''
    don't forget to de-authorize your iMac if you don't want to play purchased stuff there
    and re-authorize your new macBook Pro
    time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine  and go for it.  You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups  of your stuff.

  • MacBook Pro can't see Airport network but three other macs in house can

    Very strange. I can connect my three iMacs (G3, G5 PowerPC and G5 Intel) to my Airport Extreme Network, but my MacBook Pro can no longer see the Network, and Airport utility (from MacBook Pro) cannot see the Airport base station (although other macs' Airport Utility can no problem). My MacBook pro can see 4 other networks (my neighbours' networks). Doesn't seem to be a problem with my MacBook Pro airport card as I can connect to the (non-Mac) wireless network at work with no problem. Am really confused (not the first time)!
    Installed the latest Airport Extreme firmware last week, which was the start of the problem, as I then lost the ability to connect to my Virgin Media Broadband digital TV box, necessitating Virgin engineer visiting at weekend to connect a cable modem to the cable tv box, to which the Airport Extreme station is now attached. Had problems connecting my MacBook Pro last night, but eventually managed it. All other macs connect seamlessly. Am stumped.

    I'm troubleshooting a friend's MacBook (Model ID: MacBook4,1) that is having serious Airport problems. This machine's Airport can't see ANY available networks. Sitting right next to my MacBook (identical model), hers is blind while mine can see several open and locked networks including my own Airport base station. If I choose to "Join Other Network..." and enter the network name and password for my network, her machine almost immediately gives me a "Connection timed out" error. It doesn't matter where her MacBook is, it can't see any networks anywhere.
    This is a new problem as her Airport was working fine for the first few months. I've just finished making sure all software updates have been applied so she's now running the latest-greatest, but still no Airport.
    This sounds similar to the problems other folks here are describing so I figured I'd add my voice to the chorus. I guess I'll take her machine down to the local Apple store this afternoon and see if they have any ideas. At this point I wouldn't be surprised if her Airport card was fried.
    Calenlas

  • I have a MacBook Pro 15" 2007 which sometimes goes berserk writing the letter 'h', and makes a fast tapping sound when not in a doc. It stops when I hit the delete key. Also can't use the letter 'h' in a word processor.

    I have a MacBook Pro 15" 2007 which sometimes goes berserk writing the letter 'h' in a word processor. It stops when I hit the delete key for a while. Also can't use the letter 'h' in a word processor. The computer makes a fast tapping sound when not in a doc, in any application or in the finder or when a application is running. Sometimes when this is happening I cannot control the cursor. I have to hit the 'delete' key to proceed. Does anyone know anything of this?

    You are still under warranty.  Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty. 
    #1 - You have 14 days from the date of purchase to return your computer with no questions asked.
    #2 - You have 90 days of FREE phone tech support.
    #3 - You have the standard one year Apple warranty.
    #4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years.   You can obtain AppleCare anytime up to the first year of the purchase of your computer.
    Take FULL advantage of your warranty.  Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

  • I have been editing a document on my MacBook Pro and iPad, which has the newer versions of Pages. Now, I cannot open on My MacBook. It says I need a newer version of OS. However, I'm not showing a newer version being availabe!!! Can anyone help???

    I have been editing a document on my MacBook Pro and iPad, which has the newer versions of Pages. Now, I cannot open on My MacBook. It says I need a newer version of OS. However, I'm not showing a newer version being availabe!!! Can anyone help???

    That is Pages for iPad v2.0, which Pages '09 v4.3 can't read.
    You need to either stick with the older version of Pages on the iPad or get Pages 5 for the Mac which is only available if you are running OSX 10.9 Mavericks.
    Unfortunately that is not the end of your woes because Apple has made iCloud convert the files to Pages 5 now, and Pages 5 has over 90 features deleted on top of doing a shocking job of converting older Pages files.
    Peter

  • MacBook Pro 13" Early 2011 - Airport missing SSID

    after instal mac os x mountain lion MacBook Pro 13" Early 2011 Airport missing ssid and the chanel from 1 to 11 is missing too i live in syria and all the router wifi in the market have 1 to 11 chanels, what can i do i can't see any available
    en1:
      Card Type:          AirPort Extreme  (0x14E4, 0xD6)
      Firmware Version:          Broadcom BCM43xx 1.0 (5.106.98.81.20)
      MAC Address:          e0:f8:47:21:65:4e
      Locale:          FCC
      Country Code:          SY
      Supported PHY Modes:          802.11 a/b/g
      Supported Channels:          36, 40, 44, 48, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
      Wake On Wireless:          Supported
      AirDrop:          Supported
      Status:          Not Associated
    please help me i can't connect to any network because i cant't see any of those

    sure, i try everything even format my mac more than 5 times and the last i try to install windows 7 and i don't have this poblem, but don't like windows so i reinstall ML  and now i have same the problem
    please help me

  • Can't connect macbook pro to internet with airport extreme

    Can't connect macbook pro to internet with airport extreme

    If you have ethernet still on your MBP plug it in by ethernet and tell me if that works.
    Tell me how the Airport is setup.. what broadband modem and router you have.
    What OS on the laptop? Yosemite I guess.. since it is the most troublesome.
    Did it work before whatever change was made? Has it worked in the past? When did it stop and what did you do that coincided with it stopping?
    Upgrade to Yosemite??

  • I have an Ipod that is about a year old which was connected to an old computer that has crashed.  I just downloaded itunes on a new computer, hoping to download my music from my ipod, but it won't let me.  Any ideas how to sync them?

    I have an Ipod that is about a year old which was connected to an old computer that has crashed.  I just downloaded itunes on a new computer, hoping to download my music from my ipod, but it won't let me.  Any ideas how to sync them?

    Engadget has a guide for this.
    http://www.engadget.com/2009/11/25/how-to-get-music-videos-and-photos-off-your-i pod-iphone/

  • Purchased MacBook Pro with windows which will not open b/c no license

    Purchased MacBook Pro with windows which will not now open b/c no license number.
    CD package has license number stripped from Apple. How do I get the license number
    for the software I purchased for Windows XT?

    This is not a Mac/Apple issue.  You need to contact the seller and ask where the Windows XP product key is.

  • Macbook Pro 2.33 Ghz Airport Hardware detection issues.

    My macbook pro has recently started having an annoying problem. Every now and then, usually when waking from sleep, the airport will not connect to any hot spots. Moving the mouse over the airport icon gives me the beach ball of death, and internet connect will usually become unreliable and will need to be force quit. If I restart the airport icon does not come up at all, and my mac wont detect the airport as installed hardware. To fix this issue, I have to fully shut down my macbook pro, then turn it back on and it will work! It's only happened to me a couple of times in the past few days, it's nothing serious, but it's still annoying having to completely shut down my macbook pro to get the airport working again if it decides to die.
    Any ideas on how to fix this, or what might be causing it? I am not sure if I should take it to the local apple store because the problem might not occur while the "genius" is looking at it and will probably be deemed as "fine".
    Any help is appreciated, I'll continue to troubleshoot to see if I can find something that will cause the problem again.

    Interesting, have you applied all the security and Application Pro updates? I saw here that others exhibited the same issues that I have. Thanks for your reply...

  • HT1444 macbook pro user wondering which OS update I should have right now

    macbook pro user wondering which OS update I should have right now

    Welcome to Apple Support Communities
    You indicate that you have got an Early 2013 15-inch MacBook Pro with Retina display, so you should have got OS X 10.8 (Mountain Lion) or 10.9 (Mavericks). You can check this in  > About this Mac.
    If you want to upgrade to OS X Mavericks, open the Mac App Store and download Mavericks. Make a backup of your files with Time Machine and check that your apps are compatible > http://www.roaringapps.com

  • How can I connect my old macbook pro hard drive, which has been removed, to a new computer

    I had to remove the hard drive from my 2010 Macbook Pro due to damages motherboard (son spilled apple juice). I bought a new macbook pro and need to pull some data offf the old on. I had the hard drive removed and see the pin connector. What type of cable do I need to connect this via usb, firewire or thunderbolt

    "Newer Technology Universal 5.25/3.5/2.5" Hard Drive & Optical Drive to USB2 Adapter w/Power. Everything you need to Plug and Play any SATA/ATA/IDE/ATAPI Drive via USB 2.0/1.1 port. Fast, Simple, Plug & Play. GREAT for transferring data, etc. (NWTU2NV2SPATA)" - http://eshop.macsales.com/item/Newer%20Technology/U2NV2SPATA/

  • Transfering- copying documents from IMac to MacBook Pro  - Migration Assistant or High Speed File share cable- which would be faster?

    I started Migration Assistant to copy documents from my IMac to my new MacBook Pro - it started off saying "About 53 hours and 40 minutes remaining" to "About 64 hours and 47 minutes remaining" - I have a High Speed File Share Cable - should I have used that?

    If you mean a FireWire cable, yes.
    Your best bet is to start over.  See the green box in Problems after using Migration Assistant

  • Brand New MacBook Pro Cannot Connect to Airport Express

    Hi all,
    Been reading through these pages and I think there are many others with the same problem as me but with no real answer, I thought it wouldn't hurt to ask anyway.
    I have an Airport Express which I bought a couple of years ago. It initially worked fine on my old MacBook, I moved house and then it stopped working (flashing amber light syndrome). I got so fed up with it that it has been languishing in the loft ever since.
    After a brief stint with a Windows laptop I decided it was time to return to Apple, and I haven't regretted it for a second.....until I got the Airport Express from the loft!
    It simply, fundamentally and irrevocably...doesn't work! It's plugged in, amber light flashes but my nice new MacBook Pro just doesn't even recognise it exists. I have tried running the setup utility but at the first screen I am told that no unit is detected, I'm then told to check my Airport card (I assume it means the inbuilt modem which clearly works as I am writing to you guys now!). I can't even progress with the setup after this.
    I have tried each of the Airport setup utilities to no avail (lap top cannot "see" AX).
    Just as an update, I just connected my AX to my wireless router with an ethernet cable, a new network called 6ad16d appears to be available. Airtunes then works and I can connect to the internet (albeit slowly). I am not happy with this arrangement though as there is no padlock next to the new Apple network so I am worried that it isn't secure and surely I should be able to just plug my AX into the main and my hifi and it should work anyway?....just like it used to!
    My apologies for the rambling post and please excuse my lack of computer knowledge. I really hope someone can help!

    Fixed! You jut need a girlfriend with a lot of determination....not even sure she knows how she did it. Involved a lot of menus and a lot of swearing.
    Surely this should be easier?!

Maybe you are looking for

  • I lost my XS key on an old version of Logic Gold. What can I do?

    Hello, I have been using an old version of Logic Gold 5 on a G4 tower since 2003. I recently moved and as it goes with any move, things got lost, including my old blue eMagic XS key! I'm wondering what I can do to get my program to open now. I am not

  • SAP Bunisess Connector 4.8 -Can support SAP 4.6C and ECC6 at the same time

    Hi All, I am upgrading Busniess Connector 4.0 to 4.8 . I have sap 4.6C systems and ECC6 systems in Landscape.Will Business Connector 4.8 support both (SAP 4.6C and ECC6) simultaneously ?

  • REAGRDING : Problem in executing BDC: QP01

    Hi, I am working on bdc made by someone and i had been told to test it whether it works properly or not. But when i press F8 and try to execute it through Call Transaction Method (as it was mentioned in the Prg) and give the path for the data file it

  • IPhone 5 sound button "-" not working

    The "+" button on the side of the phone works but not the "-".  Any idea how I can fix this?  Phone is stll on warranty but I'm trying to avoid having to request a replacement if at all possible. 

  • How can we print using the windows printer dialog window?

    Hi, We recently got new printers and a printer setup on our server that are set to print in greyscale as a default. In the past the printers defaulted to printing in color. When I create VI's and reports I have used to set "Print on completion" or th