MacBook pro 10.6.5 Wi-Fi problem

I have MacBook pro 17 2.33Ghz, after update 10.6.5 and rebooot mbp don't connect to Wi-Fi. Always say "connection timeout". On 10.6.4 all work fine.

sasa43 wrote:
Try to flow the steps in this article:
http://support.2wire.com/?page=view&article=46
It doesn't matter if you have different kind of router, it's the password in your keychain got corrupted.
Let us know!
sasa43
I tried that. Hope it helps.
Before my try I've checked kernel.log:
*Nov 18 15:21:31 prostart kernel[0]: Auth result for: 48:5b:39:xx:xx:xx MAC AUTH succeeded*
*Nov 18 15:21:31 prostart kernel[0]: AirPort: RSN handshake complete on en1*
*Nov 18 15:25:31 prostart kernel[0]: Auth result for: 48:5b:39:xx:xx:xx MAC AUTH succeeded*
*Nov 18 15:25:31 prostart kernel[0]: AirPort: RSN handshake complete on en1*
*Nov 18 15:33:31 prostart kernel[0]: Auth result for: 48:5b:39:xx:xx:xx MAC AUTH succeeded*
*Nov 18 15:33:31 prostart kernel[0]: AirPort: RSN handshake complete on en1*
*Nov 18 15:41:31 prostart kernel[0]: Auth result for: 48:5b:39:xx:xx:xx MAC AUTH succeeded*
*Nov 18 15:41:31 prostart kernel[0]: AirPort: RSN handshake complete on en1*
that was moments when wifi got dropped.
Will see. Thanks!

Similar Messages

  • My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

    My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

    Hello Douglas,
    Thank you for the details of the issue you are experiencing with the built-in iSight camera on your MacBook Pro.  I recommend the following steps for this issue:
    Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
    Built-in iSight cameras
    These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
    See if the issue is application-specific.
    Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
    See if the issue is user-specific.
    Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
    Find out if the computer recognizes the iSight
    Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
    Reset SMC or PMU
    Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
    If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
    You can find the full article here:
    How to Troubleshoot iSight
    http://support.apple.com/kb/ht2090
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

    My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

    try this.
    get back into your router's settings and start deleting devices that are not connected to your router.
    you can also delete the ones that are connected - they'll connect again.
    on the DHCP side of it, increase the amount of users that can connect/log in to your router.
    see if that sorts it out for you.
    good luck.

  • About macbook pro mid 2012 ssd or sshd problem

    hi i have macbook pro mid 2012 computer.
    i have problem about sad upgrade. and i tried mac os mountain lion and yosemite x
    i uninstall normal hdd and i bought new 3 different brand ssd.
    Kingston SSd now 120 GB
    Samsung Evo 840 250gb
    Sandisk X210 256 Gb
    when i open i making cmd r  then i making internet recovery.
    my normal harddisk is making internet recovery and speed is very clearly, everything is normal.
    but when i installed one of them ssd drive, its working very slow than my normal hard drive.
    however, iam working with external hard drive box with include my ssd drive, its working normal and i can boot and i can using, everything is normal again.
    as a result, except my macbook old hard drive from sata port and when i used with external harddrive box with my ssd drives everything is ok.
    but ssd drive not working properly in data port cable.

    sorry not data, sata
    and not sad, ssd

  • I have a macbook pro and apple tv2. My problem is that my hard drive is full. What is my best option to empty movies off of my macbook but still access them through atv2?

    I have a macbook pro and apple tv2. My problem is that my hard drive is full. What is my best option to empty movies off of my macbook but still access them through atv2?

    ok. I do have a time capsule but if I move itunes on to it how do I sync my ipods and iphone? Or can I have my Itunes account on both and just move my movies to the time capsule?

  • My macbook Pro 13" 2013 has a mouse problem, its not moving naturally, and keeps on moving around like its dancing. Please help solve this!!

    My macbook Pro 13" 2013 has a mouse problem, its not moving naturally, and keeps on moving around like its dancing. Please help solve this!!

    Go step by step and test.
    1. Restart
    2. Shut down the computer.
        Clean the trackpad with moist not wet microfiber cloth.
        System Preferences > Point & Click
        Try turning off three finger dragging and then turning it on after  testing.
    3. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
      4. Reset PRAM:   http://support.apple.com/kb/PH14222
    5. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    6. Close all windows and quit all applications.
        Click the Spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
        Select Disk Utility from the drop down. When the Disk utility window opens up,
        select  Macintosh HD, then First Aid.
        Click Repair Disk Permissions button.
        Ignore the  time remaining estimate.
        Last 1 minute may take longer.

  • After Yosemite Update, Macbook Pro Frustratingly slow, along with many problems after

    My Info:
    Macbook Pro (2012)
    2.4 GHz Intel Core i5
    OS X 10.10.3 (14D136)
    Memory: 4 GB 1333 MHz DDR3
    186.54 GB free of 498.88 GB
    Until the last OS X Update (Yosemite), I have had no problems with my almost three year old MacPro.
    However, after the last update, I have so many problems with my mac, I just feel like throwing
    it out the window.
    Unfortunately, I did not have a backup prior to the update, but I backed up my photos and files, then proceeded
    to follow apple's instructions (apple support chat) to erase the HD and re-install yosemite from online. Then, I backed up my files and photos from my external drive. (I used TIME MACHINE)
    Fine in theory, but:
    1. my iphoto library was somehow lost, nowhere to ever be found again
    2. I suddenly have issues with my trackpad--the "double click" or "right" click refuses to work, I cannot drag and drop.
    3. I have java runtime error messages even upon startup, without internet connection, even though I have already deleted anything and everything java related.
    4. My safari is completely useless. Freezes even when only using one tab, must force quit every second.
    5. My computer decides by itself when to zoom in and out of a page.
    6. My apps are completely slow, I most always need to force quit them
    7. My trash has many issues-- If putting a file in the trash, it says "moving file to trash" for hours on end without ever completing the action, also, if I try emptying the trash, it's the same story.
    8. Settings. If I try to change a setting, it says "authenticating" for ever and ever without ever authenticating, and I am unable to change any settings.
    I have talked to apple many times but have not yet reached a solution.
    I have no other resolution at the moment, as I am in Taiwan for another month (My Chinese is limited and there are few, if none authentic Apple stores around)
    I have one more month on my warranty so I can *possibly* take it in to a store when I return home, but I first wanted to ask here and see if anyone else stumbled upon the same issues, or if they had solutions.
    Thank you!

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a general summary of what you need to do, if you choose to proceed:
    ☞ Copy a particular line of text to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
    5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
    You may have started up in safe mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
    If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
    [Process started]
            Part 1 of 8 done at … sec
            Part 8 of 8 done at … sec
            The test results are on the Clipboard.
            Please close this window.
    [Process completed]
    The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
    Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
    12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
    Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • MacBook Pro 15-inch, Late 2011 kernel_task problem

    Hi!
    I'm usign MacBook Pro 15-inch, Late 2011
    Since I have purchased have low performance and there are a lot of fan noise
    Today again clean install Mountain Lion and Software Update but kernel_task problem.
    EtreCheck
    Hardware Information:
              MacBook Pro - model: MacBookPro8,2
              1 2.2 GHz Intel Core i7 CPU: 4 cores
              4 GB RAM
    System Software:
              OS X 10.8.2 (12C60) - Uptime: 0 days 0:40
    Disk Information:
              ST9500325ASG disk0 : (500.11 GB)
                        disk0s1 (disk0s1) <not mounted>: 209.7 MB
                        Mac Os X (disk0s2) /: 499.25 GB (487.23 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-8A8 
    USB Information:
              Apple Computer, Inc. IR Receiver
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. FaceTime HD Camera (Built-in)
    FireWire Information:
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
                     [failed] com.apple.afpstat.plist
                     [failed] com.apple.mrt.uiagent.plist
    Launch Daemons:
                     [loaded] com.adobe.fpsaud.plist
    Launch Agents:
    User Launch Agents:
                     [failed] [email protected]nt.plist
    User Login Items:
              None
    3rd Party Preference Panes:
              Flash Player
    Internet Plug-ins:
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              JavaAppletPlugin.plugin
              QuickTime Plugin.plugin
    User Internet Plug-ins:
    Bad Fonts:
              None
    Top Processes:
              1.7   %          WindowServer
              0.9   %          EtreCheck
              0.8   %          WebProcess
              0.2   %          mds
              0.1   %          fontd
              0.1   %          mdworker
              0.1   %          hidd
              0.0   %          SystemUIServer
              0.0   %          coreservicesd
              0.0   %          Finder
    And Console
    12/4/12 7:59:18.000 PM bootlog[0]: BOOT_TIME 1354643958 0
    12/4/12 7:59:52.000 PM kernel[0]: PMAP: PCID enabled
    12/4/12 7:59:52.000 PM kernel[0]: Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
    12/4/12 7:59:52.000 PM kernel[0]: vm_page_bootstrap: 855981 free pages and 184403 wired pages
    12/4/12 7:59:52.000 PM kernel[0]: kext submap [0xffffff7f8073e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800073e000]
    12/4/12 7:59:52.000 PM kernel[0]: zone leak detection enabled
    12/4/12 7:59:52.000 PM kernel[0]: standard timeslicing quantum is 10000 us
    12/4/12 7:59:52.000 PM kernel[0]: standard background quantum is 2500 us
    12/4/12 7:59:52.000 PM kernel[0]: mig_table_max_displ = 74
    12/4/12 7:59:52.000 PM kernel[0]: TSC Deadline Timer supported and enabled
    12/4/12 7:59:52.000 PM kernel[0]: corecrypto kext started!
    12/4/12 7:59:52.000 PM kernel[0]: Running kernel space in FIPS MODE
    12/4/12 7:59:52.000 PM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    12/4/12 7:59:52.000 PM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    12/4/12 7:59:52.000 PM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
    12/4/12 7:59:52.000 PM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
    12/4/12 7:59:52.000 PM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
    12/4/12 7:59:52.000 PM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
    12/4/12 7:59:52.000 PM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
    12/4/12 7:59:52.000 PM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
    12/4/12 7:59:52.000 PM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
    12/4/12 7:59:52.000 PM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
    12/4/12 7:59:52.000 PM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
    12/4/12 7:59:52.000 PM kernel[0]: corecrypto.kext FIPS POST passed!
    12/4/12 7:59:52.000 PM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    12/4/12 7:59:52.000 PM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    12/4/12 7:59:52.000 PM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    12/4/12 7:59:19.873 PM com.apple.launchd[1]: *** launchd[1] has started up. ***
    12/4/12 7:59:52.000 PM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
    12/4/12 7:59:52.000 PM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
    12/4/12 7:59:52.000 PM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
    12/4/12 7:59:52.000 PM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
    12/4/12 7:59:52.000 PM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
    12/4/12 7:59:52.000 PM kernel[0]: calling mpo_policy_init for TMSafetyNet
    12/4/12 7:59:19.873 PM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    12/4/12 7:59:52.000 PM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    12/4/12 7:59:52.000 PM kernel[0]: calling mpo_policy_init for Sandbox
    12/4/12 7:59:51.808 PM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
    12/4/12 7:59:52.000 PM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    12/4/12 7:59:52.000 PM kernel[0]: calling mpo_policy_init for Quarantine
    12/4/12 7:59:52.000 PM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    12/4/12 7:59:52.000 PM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    12/4/12 7:59:52.000 PM kernel[0]: The Regents of the University of California. All rights reserved.
    12/4/12 7:59:52.000 PM kernel[0]: MAC Framework successfully initialized
    12/4/12 7:59:52.000 PM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    12/4/12 7:59:52.000 PM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    12/4/12 7:59:52.000 PM kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    12/4/12 7:59:52.000 PM kernel[0]: PFM64 (36 cpu) 0xf10000000, 0xf0000000
    12/4/12 7:59:52.000 PM kernel[0]: [ PCI configuration begin ]
    12/4/12 7:59:52.000 PM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 6689
    12/4/12 7:59:52.000 PM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
    12/4/12 7:59:52.000 PM kernel[0]: Sleep failure code 0x00000000 0x31000000
    12/4/12 7:59:52.000 PM kernel[0]: console relocated to 0xf60010000
    12/4/12 7:59:52.000 PM kernel[0]: PCI configuration changed (bridge=72 device=10 cardbus=0)
    12/4/12 7:59:52.000 PM kernel[0]: [ PCI configuration end, bridges 21 devices 23 ]
    12/4/12 7:59:52.000 PM kernel[0]: FireWire runtime power conservation disabled. (2)
    12/4/12 7:59:52.000 PM kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
    12/4/12 7:59:52.000 PM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    12/4/12 7:59:52.000 PM kernel[0]: rooting via boot-uuid from /chosen: 3E53729D-FBEA-3F04-A98F-60A06B103CA1
    12/4/12 7:59:52.000 PM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    12/4/12 7:59:52.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    12/4/12 7:59:52.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    12/4/12 7:59:52.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    12/4/12 7:59:52.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    12/4/12 7:59:52.000 PM kernel[0]: AppleIntelCPUPowerManagementClient: ready
    12/4/12 7:59:52.000 PM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST9500325ASG Media/IOGUIDPartitionScheme/Mac Os X@2
    12/4/12 7:59:52.000 PM kernel[0]: BSD root: disk0s2, major 1, minor 3
    12/4/12 7:59:52.000 PM kernel[0]: FireWire (OHCI) Lucent ID 5901 PCI now active, GUID 000a270200432619; max speed s800.
    12/4/12 7:59:52.000 PM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 3c0754fffeab95c8; max speed s800.
    12/4/12 7:59:52.000 PM kernel[0]: Kernel is LP64
    12/4/12 7:59:52.000 PM kernel[0]: USBMSC Identifier (non-unique): 575833314131313438313533 0x1058 0x1023 0x2005
    12/4/12 7:59:52.000 PM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
    12/4/12 7:59:52.000 PM kernel[0]: hfs: created HFBT on Mac Os X
    12/4/12 7:59:56.029 PM com.apple.SecurityServer[15]: Session 100000 created
    12/4/12 7:59:56.116 PM configd[18]: ioctl(SIOCGIFCAP) failed: Device not configured
    12/4/12 7:59:56.116 PM configd[18]: ioctl(SIOCGIFCAP) failed: Device not configured
    12/4/12 7:59:56.118 PM configd[18]: setting hostname to "Serefs-MacBook-Pro.local"
    12/4/12 7:59:56.124 PM configd[18]: network changed.
    12/4/12 7:59:56.260 PM com.apple.SecurityServer[15]: Entering service
    12/4/12 7:59:56.382 PM UserEventAgent[11]: Captive: [mySCCopyWiFiDevices:162] WiFi Device Name == NULL
    12/4/12 7:59:56.865 PM hidd[59]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    12/4/12 7:59:56.000 PM kernel[0]: Waiting for DSMOS...
    12/4/12 7:59:56.932 PM fseventsd[60]: could not open <</.fseventsd/fseventsd-uuid>> (No such file or directory)
    12/4/12 7:59:56.976 PM com.apple.launchd[1]: (com.apple.bsd.dirhelper) Throttling respawn: Will start in 10 seconds
    12/4/12 7:59:57.062 PM fseventsd[60]: log dir: /.fseventsd getting new uuid: CD1D91E4-BEDB-48FB-B591-305DC4BF7B4D
    12/4/12 7:59:57.189 PM coreservicesd[73]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
    12/4/12 7:59:57.249 PM hidd[59]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
    12/4/12 7:59:57.372 PM awacsd[69]: Starting awacsd connectivity-77 (Jun 20 2012 15:40:49)
    12/4/12 7:59:57.000 PM kernel[0]: macx_swapon SUCCESS
    12/4/12 7:59:58.616 PM awacsd[69]: InnerStore CopyAllZones: no info in Dynamic Store
    12/4/12 7:59:59.066 PM systemkeychain[84]: done file: /var/run/systemkeychaincheck.done
    12/4/12 8:00:00.183 PM apsd[71]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    12/4/12 8:00:00.184 PM apsd[71]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    12/4/12 8:00:03.000 PM kernel[0]: AGC: 3.2.6, HW version=1.9.23, flags:0, features:20600
    12/4/12 8:00:03.000 PM kernel[0]: Previous Shutdown Cause: 3
    12/4/12 8:00:06.000 PM kernel[0]: BTCOEXIST off
    12/4/12 8:00:06.000 PM kernel[0]: BRCM tunables:
    12/4/12 8:00:06.000 PM kernel[0]: pullmode[1] txringsize[  256] reapmin[   32] reapcount[  128]
    12/4/12 8:00:06.000 PM kernel[0]: highWaterMark: VO[  192]  VI[  192]  BE[  192]  BK[  192]
    12/4/12 8:00:07.006 PM appleeventsd[65]: main: Starting up
    12/4/12 8:00:07.043 PM com.apple.usbmuxd[38]: usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
    12/4/12 8:00:07.067 PM mDNSResponder[51]: mDNSResponder mDNSResponder-379.27 (Jun 20 2012 15:40:55) starting OSXVers 12
    12/4/12 8:00:07.157 PM stackshot[42]: Timed out waiting for IOKit to finish matching.
    12/4/12 8:00:09.466 PM configd[18]: network changed: DNS*
    12/4/12 8:00:09.518 PM mDNSResponder[51]: D2D_IPC: Loaded
    12/4/12 8:00:09.518 PM mDNSResponder[51]: D2DInitialize succeeded
    12/4/12 8:00:09.799 PM locationd[55]: NOTICE,Location icon should now be in state 0
    12/4/12 8:00:10.185 PM apsd[71]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    12/4/12 8:00:10.513 PM WindowServer[104]: Server is starting up
    12/4/12 8:00:10.562 PM UpdateSettingsTool[39]: 3891612: (CGSLookupServerRootPort) Untrusted apps are not allowed to connect to or launch Window Server before login.
    12/4/12 8:00:10.562 PM UpdateSettingsTool[39]: kCGErrorRangeCheck: On-demand launch of the Window Server is allowed for root user only.
    12/4/12 8:00:10.562 PM UpdateSettingsTool[39]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    12/4/12 8:00:10.562 PM UpdateSettingsTool[39]: kCGErrorRangeCheck: On-demand launch of the Window Server is allowed for root user only.
    12/4/12 8:00:10.562 PM UpdateSettingsTool[39]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    12/4/12 8:00:13.618 PM awacsd[69]: Exiting
    12/4/12 8:00:13.000 PM kernel[0]: ACPI_SMC_PlatformPlugin::initFanThrottleControl - waiting for AppleSMC
    12/4/12 8:00:15.000 PM kernel[0]: IOBluetoothUSBDFU::probe
    12/4/12 8:00:15.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    12/4/12 8:00:15.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    12/4/12 8:00:15.000 PM kernel[0]: [AGPM Controller] build GPUDict by Vendor1002Device6741
    12/4/12 8:00:15.127 PM UserEventAgent[11]: WirelessAirPortDeviceNameCopy(): no BSD interface name found for object 7947
    12/4/12 8:00:15.128 PM UserEventAgent[11]: Captive: [mySCCopyWiFiDevices:162] WiFi Device Name == NULL
    12/4/12 8:00:15.142 PM loginwindow[54]: Login Window Application Started
    12/4/12 8:00:15.000 PM kernel[0]: DSMOS has arrived
    12/4/12 8:00:15.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    12/4/12 8:00:15.000 PM kernel[0]: [IOBluetoothHCIController][start] -- completed
    12/4/12 8:00:15.000 PM kernel[0]: BCM5701Enet: Ethernet address 3c:07:54:70:ea:12
    12/4/12 8:00:15.000 PM kernel[0]: BCM5701Enet: Ethernet address 40:6c:8f:04:38:68
    12/4/12 8:00:15.000 PM kernel[0]: AirPort_Brcm4331: Ethernet address 68:a8:6d:47:81:0c
    12/4/12 8:00:15.000 PM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    12/4/12 8:00:15.000 PM kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    12/4/12 8:00:15.000 PM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    12/4/12 8:00:15.568 PM mds[50]: (Normal) FMW: FMW 0 0
    12/4/12 8:00:15.746 PM WindowServer[104]: Session 256 retained (2 references)
    12/4/12 8:00:15.746 PM WindowServer[104]: Session 256 released (1 references)
    12/4/12 8:00:15.850 PM digest-service[123]: label: default
    12/4/12 8:00:15.850 PM digest-service[123]:           dbname: od:/Local/Default
    12/4/12 8:00:15.850 PM digest-service[123]:           mkey_file: /var/db/krb5kdc/m-key
    12/4/12 8:00:15.850 PM digest-service[123]:           acl_file: /var/db/krb5kdc/kadmind.acl
    12/4/12 8:00:15.852 PM aosnotifyd[125]: bootstrap_look_up failed (44e)
    12/4/12 8:00:16.080 PM locationd[127]: NOTICE,Location icon should now be in state 0
    12/4/12 8:00:16.128 PM WindowServer[104]: Session 256 retained (2 references)
    12/4/12 8:00:16.129 PM WindowServer[104]: init_page_flip: page flip mode is on
    12/4/12 8:00:16.293 PM digest-service[123]: digest-request: uid=0
    12/4/12 8:00:16.562 PM apsd[129]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    12/4/12 8:00:16.563 PM apsd[129]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    12/4/12 8:00:16.566 PM apsd[129]: Certificate not yet generated
    12/4/12 8:00:17.000 PM kernel[0]: [ffffff802f01fc00][BNBMouseDevice::init][75.15] init is complete
    12/4/12 8:00:17.165 PM rpcsvchost[135]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
    12/4/12 8:00:17.170 PM digest-service[123]: digest-request: init request
    12/4/12 8:00:17.174 PM digest-service[123]: digest-request: init return domain: BUILTIN server: SEREFS-MACBOOK-PRO
    12/4/12 8:00:17.000 PM kernel[0]: [ffffff802f01fc00][BNBMouseDevice::handleStart][75.15] returning 1
    12/4/12 8:00:17.000 PM kernel[0]: [ffffff802d072000][AppleMultitouchHIDEventDriver::start] entered
    12/4/12 8:00:18.000 PM kernel[0]: [ffffff802f0eee00][AppleMultitouchDevice::start] entered
    12/4/12 8:00:18.105 PM apsd[129]: Certificate not yet generated
    12/4/12 8:00:18.346 PM apsd[129]: Got connection error Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fa64142b630 {NSUnderlyingError=0x7fa641112e90 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://albert.apple.com/WebObjects/ALUnbrick.woa/wa/deviceActivation?device=Mac OS, NSErrorFailingURLKey=https://albert.apple.com/WebObjects/ALUnbrick.woa/wa/deviceActivation?device=Mac OS, NSLocalizedDescription=The Internet connection appears to be offline.}
    12/4/12 8:00:18.346 PM apsd[129]: Failed to get client cert on attempt 1, will retry in 15 seconds
    12/4/12 8:00:19.890 PM WindowServer[104]: mux_initialize: Mode is dynamic
    12/4/12 8:00:20.258 PM WindowServer[104]: GLCompositor enabled for tile size [256 x 256]
    12/4/12 8:00:20.259 PM WindowServer[104]: CGXGLInitMipMap: mip map mode is on
    12/4/12 8:00:20.285 PM WindowServer[104]: WSMachineUsesNewStyleMirroring: false
    12/4/12 8:00:20.285 PM WindowServer[104]: Display 0x04248c29: GL mask 0x2; bounds (0, 0)[2560 x 1440], 42 modes available
    Main, Active, on-line, enabled, Vendor 610, Model 9227, S/N 160905e8, Unit 1, Rotation 0
    UUID 0x0000061000009227160905e800000000
    12/4/12 8:00:20.285 PM WindowServer[104]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003e
    12/4/12 8:00:20.285 PM WindowServer[104]: Display 0x042728c0: GL mask 0x9; bounds (-1440, 0)[1440 x 900], 39 modes available
    Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca3, S/N 0, Unit 0, Rotation 0
    UUID 0x0000061000009ca300000000042728c0
    12/4/12 8:00:20.297 PM WindowServer[104]: Created shield window 0x7 for display 0x04248c29
    12/4/12 8:00:20.297 PM WindowServer[104]: Created shield window 0x8 for display 0x003f003e
    12/4/12 8:00:20.299 PM WindowServer[104]: Created shield window 0x9 for display 0x042728c0
    12/4/12 8:00:20.305 PM WindowServer[104]: Display 0x04248c29: GL mask 0x2; bounds (0, 0)[2560 x 1440], 42 modes available
    Main, Active, on-line, enabled, Vendor 610, Model 9227, S/N 160905e8, Unit 1, Rotation 0
    UUID 0x0000061000009227160905e800000000
    12/4/12 8:00:20.305 PM WindowServer[104]: Display 0x003f003e: GL mask 0x4; bounds (3584, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003e
    12/4/12 8:00:20.305 PM WindowServer[104]: Display 0x042728c0: GL mask 0x9; bounds (-1440, 0)[1440 x 900], 39 modes available
    Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca3, S/N 0, Unit 0, Rotation 0
    UUID 0x0000061000009ca300000000042728c0
    12/4/12 8:00:20.305 PM WindowServer[104]: CGXPerformInitialDisplayConfiguration
    12/4/12 8:00:20.306 PM WindowServer[104]:   Display 0x04248c29: MappedDisplay Unit 1; Vendor 0x610 Model 0x9227 S/N 369690088 Dimensions 23.50 x 13.23; online enabled, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1
    12/4/12 8:00:20.306 PM WindowServer[104]:   Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1
    12/4/12 8:00:20.306 PM WindowServer[104]:   Display 0x042728c0: MappedDisplay Unit 0; Alias(0, 0x9); Vendor 0x610 Model 0x9ca3 S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (-1440,0)[1440 x 900], Rotation 0, Resolution 1
    12/4/12 8:00:20.306 PM WindowServer[104]: CGXMuxBoot: Boot normal
    12/4/12 8:00:20.000 PM kernel[0]: IOHIDSystem: Seize of IOHIDPointing failed.
    12/4/12 8:00:20.000 PM kernel[0]: IOHIDSystem: Seize of AppleMultitouchHIDEventDriver failed.
    12/4/12 8:00:20.575 PM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
    12/4/12 8:00:20.681 PM airportd[151]: _processDLILEvent: en1 attached (up)
    12/4/12 8:00:20.000 PM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
    12/4/12 8:00:20.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    12/4/12 8:00:20.000 PM kernel[0]: createVirtIf(): ifRole = 1
    12/4/12 8:00:20.000 PM kernel[0]: in func createVirtualInterface ifRole = 1
    12/4/12 8:00:20.000 PM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff802c2d9000
    12/4/12 8:00:20.000 PM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
    12/4/12 8:00:20.000 PM kernel[0]: Created virtif 0xffffff802c2d9000 p2p0
    12/4/12 8:00:22.000 PM kernel[0]: en1: 802.11d country code set to 'TR'.
    12/4/12 8:00:22.000 PM kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
    12/4/12 8:00:22.000 PM kernel[0]: MacAuthEvent en1   Auth result for: 90:f6:52:e9:1d:c4  MAC AUTH succeeded
    12/4/12 8:00:22.000 PM kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
    12/4/12 8:00:22.000 PM kernel[0]: AirPort: Link Up on en1
    12/4/12 8:00:22.000 PM kernel[0]: en1: BSSID changed to 90:f6:52:e9:1d:c4
    12/4/12 8:00:22.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    12/4/12 8:00:22.000 PM kernel[0]: AirPort: RSN handshake complete on en1
    12/4/12 8:00:24.782 PM airportd[151]: _doAutoJoin: Already associated to “KutupMedya”. Bailing on auto-join.
    12/4/12 8:00:24.799 PM airportd[151]: _doAutoJoin: Already associated to “KutupMedya”. Bailing on auto-join.
    12/4/12 8:00:24.816 PM airportd[151]: _doAutoJoin: Already associated to “KutupMedya”. Bailing on auto-join.
    12/4/12 8:00:24.833 PM airportd[151]: _doAutoJoin: Already associated to “KutupMedya”. Bailing on auto-join.
    12/4/12 8:00:24.969 PM configd[18]: network changed: v4(en1+:192.168.15.106) DNS+ Proxy+ SMB
    12/4/12 8:00:25.819 PM UserEventAgent[11]: Captive: en1: Not probing 'KutupMedya' (protected network)
    12/4/12 8:00:25.823 PM configd[18]: network changed: v4(en1!:192.168.15.106) DNS Proxy SMB
    12/4/12 8:00:25.824 PM apsd[129]: Certificate not yet generated
    12/4/12 8:00:25.881 PM WindowServer[104]: GLCompositor: GL renderer id 0x01021b06, GL mask 0x00000007, accelerator 0x00004163, unit 0, caps QEX|QGL|MIPMAP, vram 512 MB
    12/4/12 8:00:25.881 PM WindowServer[104]: GLCompositor: GL renderer id 0x01021b06, GL mask 0x00000007, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    12/4/12 8:00:25.881 PM WindowServer[104]: GLCompositor: GL renderer id 0x01024301, GL mask 0x00000008, accelerator 0x00003c17, unit 3, caps QEX|QGL|MIPMAP, vram 451 MB
    12/4/12 8:00:25.882 PM WindowServer[104]: GLCompositor: GL renderer id 0x01024301, GL mask 0x00000008, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
    12/4/12 8:00:25.883 PM WindowServer[104]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    12/4/12 8:00:25.886 PM WindowServer[104]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    12/4/12 8:00:25.918 PM loginwindow[54]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    12/4/12 8:00:25.974 PM WindowServer[104]: Created shield window 0xa for display 0x04248c29
    12/4/12 8:00:25.975 PM WindowServer[104]: Display 0x04248c29: MappedDisplay Unit 1; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    12/4/12 8:00:25.975 PM WindowServer[104]: Display 0x04248c29: MappedDisplay Unit 1; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    12/4/12 8:00:25.978 PM WindowServer[104]: Created shield window 0xb for display 0x042728c0
    12/4/12 8:00:25.979 PM WindowServer[104]: Display 0x042728c0: MappedDisplay Unit 0; ColorProfile { 3, "Color LCD"}; TransferTable (256, 3)
    12/4/12 8:00:25.979 PM WindowServer[104]: Display 0x042728c0: MappedDisplay Unit 0; ColorProfile { 3, "Color LCD"}; TransferTable (256, 3)
    12/4/12 8:00:25.981 PM WindowServer[104]: Display 0x04248c29: MappedDisplay Unit 1; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    12/4/12 8:00:25.982 PM WindowServer[104]: Display 0x042728c0: MappedDisplay Unit 0; ColorProfile { 3, "Color LCD"}; TransferTable (256, 3)
    12/4/12 8:00:25.995 PM WindowServer[104]: Display 0x04248c29: MappedDisplay Unit 1; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    12/4/12 8:00:25.995 PM WindowServer[104]: Display 0x04248c29: MappedDisplay Unit 1; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    12/4/12 8:00:25.996 PM WindowServer[104]: Display 0x042728c0: MappedDisplay Unit 0; ColorProfile { 3, "Color LCD"}; TransferTable (256, 3)
    12/4/12 8:00:25.997 PM apsd[129]: Certificate not yet generated
    12/4/12 8:00:25.997 PM WindowServer[104]: Display 0x042728c0: MappedDisplay Unit 0; ColorProfile { 3, "Color LCD"}; TransferTable (256, 3)
    12/4/12 8:00:26.005 PM launchctl[168]: com.apple.findmymacmessenger: Already loaded
    12/4/12 8:00:26.027 PM com.apple.SecurityServer[15]: Session 100005 created
    12/4/12 8:00:26.140 PM WindowServer[104]: Unable to open IOHIDSystem (e00002bd)
    12/4/12 8:00:26.185 PM airportd[151]: _doAutoJoin: Already associated to “KutupMedya”. Bailing on auto-join.
    12/4/12 8:00:26.281 PM BezelServices 235.55[54]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)
    12/4/12 8:00:26.000 PM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
    12/4/12 8:00:27.384 PM hidd[59]: CGSShutdownServerConnections: Detaching application from window server
    12/4/12 8:00:27.384 PM hidd[59]: CGSDisplayServerShutdown: Detaching display subsystem from window server
    12/4/12 8:00:27.718 PM loginwindow[54]: Login Window Started Security Agent
    12/4/12 8:00:28.888 PM WindowServer[104]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04248c29 device: 0x1051add30  isBackBuffered: 1 numComp: 3 numDisp: 3
    12/4/12 8:00:29.231 PM WindowServer[104]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042728c0 device: 0x1051ad320  isBackBuffered: 1 numComp: 3 numDisp: 3
    12/4/12 8:00:30.167 PM SecurityAgent[180]: This is the first run
    12/4/12 8:00:30.168 PM SecurityAgent[180]: MacBuddy was run = 0
    12/4/12 8:00:30.227 PM SecurityAgent[180]: User info context values set for serefyucar
    12/4/12 8:00:30.483 PM genatsdb[193]: ########## genatsdb Sandboxed. ##########
    12/4/12 8:00:36.269 PM coreaudiod[175]: 2012-12-04 08:00:36.268291 PM [AirPlay] Started browsing for _airplay._tcp.
    12/4/12 8:00:36.269 PM coreaudiod[175]: 2012-12-04 08:00:36.268824 PM [AirPlay] Started browsing for _raop._tcp.
    12/4/12 8:00:37.386 PM UserEventAgent[169]: cannot find useragent 1102
    12/4/12 8:00:39.112 PM UpdateSettingsTool[39]: [Warning] Bad response from daemon for setup info
    12/4/12 8:00:40.865 PM ntpd[118]: proto: precision = 1.000 usec
    12/4/12 8:00:43.748 PM genatsdb[193]: *GENATSDB* FontObjects generated = 394
    12/4/12 8:00:47.852 PM loginwindow[54]: Login Window - Returned from Security Agent
    12/4/12 8:00:47.878 PM loginwindow[54]: USER_PROCESS: 54 console
    12/4/12 8:00:47.947 PM airportd[151]: _doAutoJoin: Already associated to “KutupMedya”. Bailing on auto-join.
    12/4/12 8:00:47.996 PM com.apple.launchd.peruser.501[218]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    12/4/12 8:00:47.999 PM loginwindow[54]: Connection with distnoted server was invalidated
    12/4/12 8:00:48.005 PM distnoted[221]: # distnote server agent  absolute time: 89.985100907   civil time: Tue Dec  4 20:00:48 2012   pid: 221 uid: 501  root: no
    12/4/12 8:00:48.006 PM distnoted[221]: Bug: 12A269: liblaunch.dylib + 23849 [224CB010-6CF8-3FC2-885C-6F80330321EB]: 0x25
    12/4/12 8:00:48.972 PM com.apple.SecurityServer[15]: Session 100008 created
    12/4/12 8:00:49.159 PM MiniLauncher[230]: Skipping Setup Assistant for user 501
    12/4/12 8:00:49.211 PM transition[231]: INFO: Not signed into MobileMe, nothing to do.
    12/4/12 8:00:50.498 PM MiniLauncher[230]: INFO: MMAccountMgr_Private: finishedSetup called.
    12/4/12 8:00:50.750 PM genatsdb[239]: ########## genatsdb Sandboxed. ##########
    12/4/12 8:00:51.767 PM genatsdb[239]: *GENATSDB* FontObjects generated = 394
    12/4/12 8:00:51.891 PM WindowServer[104]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    12/4/12 8:00:51.917 PM WindowServer[104]: Display 0x04248c29: MappedDisplay Unit 1; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    12/4/12 8:00:51.918 PM WindowServer[104]: Display 0x042728c0: MappedDisplay Unit 0; ColorProfile { 3, "Color LCD"}; TransferTable (256, 3)
    12/4/12 8:00:52.123 PM coreservicesd[73]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationReady to notificationID=123
    12/4/12 8:00:52.375 PM NetworkBrowserAgent[255]: Starting NetworkBrowserAgent
    12/4/12 8:00:53.439 PM WindowServer[104]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
    12/4/12 8:00:53.512 PM com.apple.launchd.peruser.501[218]: (com.apple.afpstat-qfa[283]) Exited with code: 2
    12/4/12 8:00:53.514 PM com.apple.launchd.peruser.501[218]: ([email protected][284]) Exited with code: 2
    12/4/12 8:00:53.656 PM coreservicesd[73]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationCreation to notificationID=136
    12/4/12 8:00:54.278 PM com.apple.launchd.peruser.501[218]: (com.apple.mrt.uiagent[273]) Exited with code: 255
    12/4/12 8:00:55.120 PM fseventsd[60]: could not open <</Volumes/WD/.fseventsd/fseventsd-uuid>> (No such file or directory)
    12/4/12 8:00:55.120 PM fseventsd[60]: log dir: /Volumes/WD/.fseventsd getting new uuid: 023A2DE1-100B-4FB5-8ECE-4F400C3D9701
    12/4/12 8:00:55.724 PM blued[68]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
    12/4/12 8:00:56.167 PM com.apple.usbmuxd[38]: _handle_timer heartbeat detected detach for device 0x2-192.168.15.105:0!
    12/4/12 8:00:56.913 PM Dock[245]: LaunchPad: <LPRoot: 0x7fa62343a310 1 children> has bad children layout. Fixing.
    12/4/12 8:00:57.628 PM UserEventAgent[267]: cannot find fw daemon port 1102
    12/4/12 8:00:57.762 PM WindowServer[104]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 5.32 seconds (server forcibly re-enabled them after 1.00 seconds)
    12/4/12 8:01:00.111 PM SystemUIServer[246]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    12/4/12 8:01:00.112 PM SystemUIServer[246]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    12/4/12 8:01:03.657 PM CalendarAgent[280]: In-place migration failed. Trying to restore from the truth files...
    12/4/12 8:01:05.308 PM com.apple.SecurityServer[15]: Session 100007 created
    12/4/12 8:01:06.537 PM AOSPushRelay[261]: AOSKit WARN: _AOSAccountRefreshAll called from outside iCloud Helper.
    12/4/12 8:01:09.109 PM fseventsd[60]: Logging disabled completely for device:1: /Volumes/Recovery HD
    12/4/12 8:01:10.555 PM com.apple.dock.extra[300]: Did migrate store at path: /Users/serefyucar/Library/Application Support/AddressBook/Sources/4833E2D2-E710-4D65-92C5-D2C6F242B045/AddressBook-v2 2.abcddb
    12/4/12 8:01:10.810 PM CalendarAgent[280]: WARNING: [CalManagedStore restoreGroupAtPath]: Unknown group type: Migration
    12/4/12 8:01:11.246 PM com.apple.dock.extra[300]: Did migrate store at path: /Users/serefyucar/Library/Application Support/AddressBook/AddressBook-v22.abcddb
    12/4/12 8:01:11.376 PM com.apple.dock.extra[300]: Implicitly linking
    12/4/12 8:02:03.891 PM migCacheCleanup[237]: Cache cleanup: cleanup for user 501 took 0.28 seconds
    12/4/12 8:02:26.000 PM kernel[0]: considerRebuildOfPrelinkedKernel com.apple.iokit.IOGraphicsFamily triggered rebuild
    12/4/12 8:03:11.767 PM CalendarAgent[280]: Attempt to delete change tracking file /Users/serefyucar/Library/Calendars/Calendar Sync Changes/46FD7F47-3D22-4221-8A38-FE37EBF0487F.tmp failed
    12/4/12 8:03:11.767 PM CalendarAgent[280]: Attempt to delete change tracking file /Users/serefyucar/Library/Calendars/Calendar Sync Changes/551109F3-39B1-4093-A4B5-22BCF676FF36.tmp failed
    12/4/12 8:03:11.768 PM CalendarAgent[280]: Attempt to delete change tracking file /Users/serefyucar/Library/Calendars/Calendar Sync Changes/A21CE94D-633F-4845-BB86-AB419D8CCFDB.tmp failed
    12/4/12 8:03:12.236 PM CalendarAgent[280]: Attempt to delete change tracking file /Users/serefyucar/Library/Calendars/Calendar Sync Changes/B8945BB4-A83F-42CD-87AF-2AD863ECAC26.tmp failed
    12/4/12 8:03:12.237 PM CalendarAgent[280]: Attempt to delete change tracking file /Users/serefyucar/Library/Calendars/Calendar Sync Changes/BEBCE7C7-2DA1-4463-B0BE-099DE0DEF545.tmp failed
    12/4/12 8:03:12.238 PM CalendarAgent[280]: Attempt to delete change tracking file /Users/serefyucar/Library/Calendars/Calendar Sync Changes/CCD26DED-C3CE-497A-A673-3E0C2C468524.tmp failed
    12/4/12 8:03:12.238 PM CalendarAgent[280]: Attempt to delete change tracking file /Users/serefyucar/Library/Calendars/Calendar Sync Changes/E2D3165A-E69A-4F23-872D-A592427DCAF3.tmp failed
    12/4/12 8:10:51.323 PM WindowServer[104]: Created shield window 0x2f for display 0x04248c29
    12/4/12 8:10:51.325 PM WindowServer[104]: Created shield window 0x30 for display 0x042728c0
    12/4/12 8:10:51.325 PM WindowServer[104]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x0(0)
    12/4/12 8:10:51.634 PM WindowServer[104]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x0(0)
    12/4/12 8:10:51.645 PM WindowServer[104]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x0(0)
    12/4/12 8:10:58.823 PM com.apple.kextcache[327]: Kernel file /mach_kernel does not contain requested arch: i386
    12/4/12 8:11:18.436 PM com.apple.kextcache[327]: Created prelinked kernel /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache.
    12/4/12 8:17:55.000 PM kernel[0]: hibernate image path: /var/vm/sleepimage
    12/4/12 8:17:55.000 PM kernel[0]: sizeof(IOHibernateImageHeader) == 512
    12/4/12 8:17:55.000 PM kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
    12/4/12 8:17:55.000 PM kernel[0]: kern_open_file_for_direct_io(0) took 18 ms
    12/4/12 8:17:55.000 PM kernel[0]: Opened file /var/vm/sleepimage, size 4294967296, partition base 0x0, maxio 400000 ssd 0
    12/4/12 8:17:55.000 PM kernel[0]: hibernate image major 1, minor 0, blocksize 512, pollers 4
    12/4/12 8:17:55.000 PM kernel[0]: hibernate_alloc_pages flags 00000000, gobbling 0 pages
    12/4/12 8:17:55.000 PM kernel[0]: hibernate_setup(0) took 0 ms
    12/4/12 8:18:01.000 PM kernel[0]: hibernate_page_list_setall start 0xffffff808b646000, 0xffffff808b666000
    12/4/12 8:18:01.000 PM kernel[0]: hibernate_page_list_setall time: 145 ms
    12/4/12 8:18:01.000 PM kernel[0]: pages 623102, wire 235622, act 86927, inact 3, cleaned 0 spec 69, zf 2388, throt 0, could discard act 60405 inact 45377 purgeable 13126 spec 179185 cleaned 0
    12/4/12 8:18:01.000 PM kernel[0]: hibernate_page_list_setall found pageCount 325009
    12/4/12 8:18:01.000 PM kernel[0]: IOHibernatePollerOpen, ml_get_interrupts_enabled 0
    12/4/12 8:18:01.000 PM kernel[0]: IOHibernatePollerOpen(0)
    12/4/12 8:18:01.000 PM kernel[0]: encryptStart 13230
    12/4/12 8:18:01.000 PM kernel[0]: writing 324721 pages
    12/4/12 8:18:01.000 PM kernel[0]: encryptEnd c023000
    12/4/12 8:18:01.000 PM kernel[0]: image1Size 0xffc2800, encryptStart1 0x13230, End1 0xc023000
    12/4/12 8:18:01.000 PM kernel[0]: encryptStart ffc2800
    12/4/12 8:18:01.000 PM kernel[0]: encryptEnd 18d7d800
    12/4/12 8:18:01.000 PM kernel[0]: PMStats: Hibernate write took 5360 ms
    12/4/12 8:18:01.000 PM kernel[0]: all time: 5360 ms, comp bytes: 1330421760 time: 843 ms 1504 Mb/s, crypt bytes: 350006736 time: 642 ms 519 Mb/s,
    12/4/12 8:18:01.000 PM kernel[0]: image 416798720, uncompressed 1330421760 (324810), compressed 414167456 (31%), sum1 8482bc52, sum2 631e73ed
    12/4/12 8:18:01.000 PM kernel[0]: wired_pages_encrypted 185481, wired_pages_clear 49942, dirty_pages_encrypted 89387
    12/4/12 8:18:01.000 PM kernel[0]: hibernate_write_image done(0)
    12/4/12 8:18:01.000 PM kernel[0]: sleep
    12/4/12 8:18:02.000 PM kernel[0]: TBT W (1): 5 [x]
    12/4/12 8:18:02.000 PM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 2 unplug = 0
    12/4/12 8:18:02.000 PM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 1 unplug = 0
    12/4/12 9:17:55.029 PM com.apple.usbmuxd[38]: DeviceRequestAsync failed: 0xe0004057
    12/4/12 9:17:55.000 PM kernel[0]: AppleThunderboltDPPathManager<0xffffff802c238e00>::createPath - kDPPathTypeVideo - NFC [src=5 int=14 dst=14] Initial Credits [src=0 int=0 dst=0]
    12/4/12 9:17:55.000 PM kernel[0]: AppleThunderboltDPPathManager<0xffffff802c238e00>::createPath - kDPPathTypeAuxTx - NFC [src=0 int=0 dst=0] Initial Credits [src=2 int=2 dst=1]
    12/4/12 9:17:55.000 PM kernel[0]: AppleThunderboltDPPathManager<0xffffff802c238e00>::createPath - kDPPathTypeAuxRx - NFC [src=0 int=0 dst=0] Initial Credits [src=7 int=2 dst=1]
    12/4/12 9:17:55.000 PM kernel[0]: Wake reason: EHC2
    12/4/12 9:17:55.000 PM kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
    12/4/12 9:17:55.000 PM kernel[0]: Previous Sleep Cause: 5
    12/4/12 9:17:55.000 PM kernel[0]: The USB device HubDevice (Port 1 of Hub at 0xfa000000) may have caused a wake by issuing a remote wakeup (2)
    12/4/12 9:17:55.000 PM kernel[0]: [ PCI configuration begin ]
    12/4/12 9:17:55.000 PM kernel[0]: PCI configuration changed (bridge=74 device=10 cardbus=0)
    12/4/12 9:17:55.000 PM kernel[0]: [ PCI configuration end, bridges 21 devices 23 ]
    12/4/12 9:17:55.000 PM kernel[0]: wlEvent: en1 en1 Link DOWN virtIf = 0
    12/4/12 9:17:55.000 PM kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    12/4/12 9:17:55.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    12/4/12 9:17:55.000 PM kernel[0]: en1: 802.11d country code set to 'X3'.
    12/4/12 9:17:55.000 PM kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
    12/4/12 9:17:55.000 PM kernel[0]: The USB device BRCM2070 Hub (Port 1 of Hub at 0xfa100000) may have caused a wake by issuing a remote wakeup (3)
    12/4/12 9:17:55.302 PM hidd[59]: MultitouchHID: device bootloaded
    12/4/12 9:17:55.489 PM WindowServer[104]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
    12/4/12 9:17:55.491 PM WindowServer[104]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
    12/4/12 9:17:56.000 PM kernel[0]: The USB device Bluetooth USB Host Controller (Port 3 of Hub at 0xfa110000) may have caused a wake by issuing a remote wakeup (3)
    12/4/12 9:17:56.000 PM kernel[0]: HID tickle 313 ms
    12/4/12 9:17:57.000 PM kernel[0]: en1: 802.11d country code set to 'TR'.
    12/4/12 9:17:57.000 PM kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
    12/4/12 9:17:57.571 PM configd[18]: network changed: v4(en1-:192.168.15.106) DNS- Proxy- SMB
    12/4/12 9:17:57.000 PM kernel[0]: MacAuthEvent en1   Auth result for: 90:f6:52:e9:1d:c4  MAC AUTH succeeded
    12/4/12 9:17:57.000 PM kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
    12/4/12 9:17:57.000 PM kernel[0]: AirPort: Link Up on en1
    12/4/12 9:17:57.000 PM kernel[0]: en1: BSSID changed to 90:f6:52:e9:1d:c4
    12/4/12 9:17:57.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    12/4/12 9:17:57.000 PM kernel[0]: AirPort: RSN handshake complete on en1
    12/4/12 9:17:57.666 PM configd[18]: network changed: v4(en1+:192.168.15.106) DNS+ Proxy+ SMB
    12/4/12 9:17:57.681 PM UserEventAgent[11]: Captive: en1: Not probing 'KutupMedya' (protected network)
    12/4/12 9:17:57.684 PM configd[18]: network changed: v4(en1!:192.168.15.106) DNS Proxy SMB
    12/4/12 9:17:58.293 PM airportd[402]: _doAutoJoin: Already associated to “KutupMedya”. Bailing on auto-join.
    12/4/12 9:18:00.409 PM Dock[245]: Unable to open IOHIDSystem (e00002bd)
    12/4/12 9:18:00.000 PM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
    12/4/12 9:18:01.054 PM airportd[402]: _doAutoJoin: Already associated to “KutupMedya”. Bailing on auto-join.
    12/4/12 9:18:01.000 PM kernel[0]: en1: BSSID changed to 90:f6:52:e9:1d:c4
    12/4/12 9:18:06.939 PM mdwrite[408]: [ERROR] [0.000s] com.apple. UBItemStatusNotification.c:805 _do_UBItemStatusNotificationRegisterURLs() can't find realpath for "/Users/serefyucar/Library/Mobile Documents/com~apple~system~spotlight/mdlabels", was blocked at "/Users/serefyucar/Library/Mobile Documents": 2 (No such file or directory)
    12/4/12 9:18:06.940 PM mdwrite[408]: [ERROR] [0.001s] com.apple. UBItemStatusNotification.c:805 _do_UBItemStatusNotificationRegisterURLs() can't find realpath for "/Users/serefyucar/Library/Mobile Documents/com~apple~system~spotlight/mdlabels", was blocked at "/Users/serefyucar/Library/Mobile Documents": 2 (No such file or directory)
    12/4/12 9:18:16.109 PM WindowServer[104]: CGXDeferSurfaces : Invalid source window 60
    12/4/12 9:18:24.414 PM com.apple.launchd.peruser.501[218]: (com.apple.PackageKit.InstallStatus) Throttling respawn: Will start in 6 seconds
    12/4/12 9:18:24.419 PM WindowServer[104]: CGXGetConnectionProperty: Invalid connection 40963
    12/4/12 9:18:24.419 PM WindowServer[104]: CGXGetConnectionProperty: Invalid connection 40963
    12/4/12 9:18:24.420 PM WindowServer[104]: CGXGetConnectionProperty: Invalid connection 40963
    12/4/12 9:18:24.420 PM WindowServer[104]: CGXGetConnectionProperty: Invalid connection 40963
    12/4/12 9:18:24.420 PM WindowServer[104]: CGXGetConnectionProperty: Invalid connection 40963
    12/4/12 9:18:24.421 PM WindowServer[104]: dict count after removing entry for window 0x27 is 0
    12/4/12 9:18:24.426 PM coreservicesd[73]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=161
    12/4/12 9:18:24.431 PM com.apple.launchd.peruser.501[218]: ([0x0-0x15015].com.apple.ImageCaptureExtension2[295]) Exited: Killed: 9
    12/4/12 9:18:24.431 PM com.apple.launchd.peruser.501[218]: ([0x0-0x34034].com.apple.AppleSpell[409]) Exited: Terminated: 15
    12/4/12 9:18:24.432 PM com.apple.launchd.peruser.501[218]: (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[396]) Exited: Killed: 9
    12/4/12 9:18:24.432 PM com.apple.launchd.peruser.501[218]: (com.apple.quicklook[412]) Exited: Killed: 9
    12/4/12 9:18:24.432 PM coreservicesd[73]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=151
    12/4/12 9:18:24.432 PM coreservicesd[73]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=210
    12/4/12 9:18:24.433 PM coreservicesd[73]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=136
    12/4/12 9:18:24.434 PM WindowServer[104]: CGXGetConnectionProperty: Invalid connection 40963
    12/4/12 9:18:24.434 PM WindowServer[104]: CGXGetConnectionProperty: Invalid connection 40963
    12/4/12 9:18:24.434 PM WindowServer[104]: CGXGetConnectionProperty: Invalid connection 40963
    12/4/12 9:18:24.434 PM WindowServer[104]: CGXGetConnectionProperty: Invalid connection 40963
    12/4/12 9:18:24.434 PM WindowServer[104]: CGXGetConnectionProperty: Invalid connection 40963
    12/4/12 9:18:24.464 PM loginwindow[54]: DEAD_PROCESS: 54 console
    12/4/12 9:18:24.672 PM WindowServer[104]: CGXGetConnectionProperty: Invalid connection 40963
    12/4/12 9:18:24.672 PM WindowServer[104]: CGXGetConnectionProperty: Invalid connection 40963
    12/4/12 9:18:24.672 PM WindowServer[104]: CGXGetConnectionProperty: Invalid connection 40963
    12/4/12 9:18:24.672 PM WindowServer[104]: CGXGetConnectionProperty: Invalid connection 40963
    12/4/12 9:18:24.672 PM WindowServer[104]: CGXGetConnectionProperty: Invalid connection 40963
    12/4/12 9:18:24.682 PM airportd[402]: _doAutoJoin: Already associated to “KutupMedya”. Bailing on auto-join.
    12/4/12 9:18:25.075 PM shutdown[424]: halt by serefyucar:
    12/4/12 9:18:25.075 PM shutdown[424]: SHUTDOWN_TIME: 1354648705 75127
    12/4/12 9:18:25.000 PM kernel[0]: Kext loading now disabled.
    12/4/12 9:18:25.000 PM kernel[0]: Kext unloading now disabled.
    12/4/12 9:18:25.000 PM kernel[0]: Kext autounloading now disabled.
    12/4/12 9:18:25.000 PM kernel[0]: Kernel requests now disabled.
    12/4/12 9:53:38.000 PM bootlog[0]: BOOT_TIME 1354650818 0
    12/4/12 9:53:39.950 PM com.apple.launchd[1]: *** launchd[1] has started up. ***
    12/4/12 9:53:39.950 PM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    12/4/12 9:53:56.493 PM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
    12/4/12 9:54:05.000 PM kernel[0]: PMAP: PCID enabled
    12/4/12 9:54:05.000 PM kernel[0]: Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
    12/4/12 9:54:05.000 PM kernel[0]: vm_page_bootstrap: 946092 free pages and 94292 wired pages
    12/4/12 9:54:05.000 PM kernel[0]: kext submap [0xffffff7f8073e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800073e000]
    12/4/12 9:54:05.000 PM kernel[0]: zone leak detection enabled
    12/4/12 9:54:05.000 PM kernel[0]: standard timeslicing quantum is 10000 us
    12/4/12 9:54:05.000 PM kernel[0]: standard background quantum is 2500 us
    12/4/12 9:54:05.000 PM kernel[0]: mig_table_max_displ = 74
    12/4/12 9:54:05.000 PM kernel[0]: TSC Deadline Timer supported and enabled
    12/4/12 9:54:05.000 PM kernel[0]: corecrypto kext started!
    12/4/12 9:54:05.000 PM kernel[0]: Running kernel space in FIPS MODE
    12/4/12 9:54:05.000 PM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    12/4/12 9:54:05.000 PM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    12/4/12 9:54:05.000 PM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
    12/4/12 9:54:05.000 PM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
    12/4/12 9:54:05.000 PM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
    12/4/12 9:54:05.000 PM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
    12/4/12 9:54:05.000 PM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
    12/4/12 9:54:05.000 PM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
    12/4/12 9:54:05.000 PM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
    12/4/12 9:54:05.000 PM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
    12/4/12 9:54:05.000 PM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
    12/4/12 9:54:05.000 PM kernel[0]: corecrypto.kext FIPS POST passed!
    12/4/12 9:54:05.000 PM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    12/4/12 9:54:05.000 PM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    12/4/12 9:54:05.000 PM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    12/4/12 9:54:05.000 PM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
    12/4/12 9:54:05.000 PM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
    12/4/12 9:54:05.000 PM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
    12/4/12 9:54:05.000 PM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
    12/4/12 9:54:05.000 PM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
    12/4/12 9:54:05.000 PM kernel[0]: calling mpo_policy_init for TMSafetyNet
    12/4/12 9:54:05.000 PM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    12/4/12 9:54:05.000 PM kernel[0]: calling mpo_policy_init for Sandbox
    12/4/12 9:54:05.000 PM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    12/4/12 9:54:05.000 PM kernel[0]: calling mpo_policy_init for Quarantine
    12/4/12 9:54:05.000 PM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    12/4/12 9:54:05.000 PM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    12/4/12 9:54:05.000 PM kernel[0]: The Regents of the University of California. All rights reserved.
    12/4/12 9:54:05.000 PM kernel[0]: MAC Framework successfully initialized
    12/4/12 9:54:05.000 PM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    12/4/12 9:54:05.000 PM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    12/4/12 9:54:05.000 PM kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    12/4/12 9:54:05.000 PM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 6689
    12/4/12 9:54:05.000 PM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
    12/4/12 9:54:05.000 PM kernel[0]: PFM64 (36 cpu) 0xf10000000, 0xf0000000
    12/4/12 9:54:05.000 PM kernel[0]: [ PCI configuration begin ]
    12/4/12 9:54:05.000 PM kernel[0]: console relocated to 0xf60010000
    12/4/12 9:54:05.000 PM kernel[0]: PCI configuration changed (bridge=16 device=5 cardbus=0)
    12/4/12 9:54:05.000 PM kernel[0]: [ PCI configuration end, bridges 12 devices 18 ]
    12/4/12 9:54:05.000 PM kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
    12/4/12 9:54:05.000 PM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    12/4/12 9:54:05.000 PM kernel[0]: rooting via boot-uuid from /chosen: 3E53729D-FBEA-3F04-A98F-60A06B103CA1
    12/4/12 9:54:05.000 PM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    12/4/12 9:54:05.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    12/4/12 9:54:05.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    12/4/12 9:54:05.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    12/4/12 9:54:05.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    12/4/12 9:54:05.000 PM kernel[0]: AppleIntelCPUPowerManagementClient: ready
    12/4/12 9:54:05.000 PM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 3c0754fffeab95c8; max speed s800.
    12/4/12 9:54:05.000 PM kernel[0]: BTCOEXIST off
    12/4/12 9:54:05.000 PM kernel[0]: BRCM tunables:
    12/4/12 9:54:05.000 PM kernel[0]: pullmode[1] txringsize[  256] reapmin[   32] reapcount[  128]
    12/4/12 9:54:05.000 PM kernel[0]: highWaterMark: VO[  192]  VI[  192]  BE[  192]  BK[  192]
    12/4/12 9:54:05.000 PM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST9500325ASG Media/IOGUIDPartitionScheme/Mac Os X@2
    12/4/12 9:54:05.000 PM kernel[0]: BSD root: disk0s2, major 1, minor 3
    12/4/12 9:54:05.000 PM kernel[0]: Kernel is LP64
    12/4/12 9:54:05.000 PM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
    12/4/12 9:54:05.000 PM kernel[0]: USBMSC Identifier (non-unique): 575833314131313438313533 0x1058 0x1023 0x2005
    12/4/12 9:54:05.000 PM kernel[0]: Waiting for DSMOS...
    12/4/12 9:54:05.000 PM kernel[0]: macx_swapon SUCCESS
    12/4/12 9:54:05.496 PM hidd[43]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    12/4/12 9:54:06.000 PM kernel[0]: BCM5701Enet: Ethernet address 3c:07:54:70:ea:12
    12/4/12 9:54:06.000 PM kernel[0]: AirPort_Brcm4331: Ethernet address 68:a8:6d:47:81:0c
    12/4/12 9:54:06.000 PM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    12/4/12 9:54:06.000 PM kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    12/4/12 9:54:07.710 PM coreservicesd[59]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
    12/4/12 9:54:07.713 PM mDNSResponder[36]: mDNSResponder mDNSResponder-379.27 (Jun 20 2012 15:40:55) starting OSXVers 12
    12/4/12 9:54:07.747 PM airportd[64]: _processDLILEvent: en1 attached (down)
    12/4/12 9:54:07.778 PM hidd[43]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
    12/4/12 9:54:07.886 PM appleeventsd[49]: main: Starting up
    12/4/12 9:54:08.000 PM kernel[0]: createVirtIf(): ifRole = 1
    12/4/12 9:54:08.000 PM kernel[0]: in func createVirtualInterface ifRole = 1
    12/4/12 9:54:08.000 PM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff8016612000
    12/4/12 9:54:08.000 PM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
    12/4/12 9:54:08.000 PM kernel[0]: Created virtif 0xffffff8016612000 p2p0
    12/4/12 9:54:08.000 PM kernel[0]: AGC: 3.2.6, HW version=1.9.23, flags:0, features:20600
    12/4/12 9:54:08.000 PM kernel[0]: Previous Shutdown Cause: 5
    12/4/12 9:54:08.000 PM kernel[0]: IOBluetoothUSBDFU::probe
    12/4/12 9:54:08.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    12/4/12 9:54:08.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    12/4/12 9:54:08.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    12/4/12 9:54:08.000 PM kernel[0]: [IOBluetoothHCIController][start] -- completed
    12/4/12 9:54:08.000 PM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    12/4/12 9:54:08.056 PM com.apple.SecurityServer[17]: Session 100000 created
    12/4/12 9:54:08.099 PM com.apple.usbmuxd[21]: usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
    12/4/12 9:54:08.000 PM kernel[0]: DSMOS has arrived
    12/4/12 9:54:08.902 PM com.apple.SecurityServer[17]: Entering service
    12/4/12 9:54:08.000 PM kernel[0]: ACPI_SMC_PlatformPlugin::initFanThrottleControl - waiting for AppleSMC
    12/4/12 9:54:09.000 PM kernel[0]: [AGPM Controller] build GPUDict by Vendor1002Device6741
    12/4/12 9:54:09.043 PM mds[35]: (Normal) FMW: FMW 0 0
    12/4/12 9:54:09.109 PM systemkeychain[73]: done file: /var/run/systemkeychaincheck.done
    12/4/12 9:54:09.835 PM loginwindow[39]: Login Window Application Started
    12/4/12 9:54:10.038 PM mDNSResponder[36]: D2D_IPC: Loaded
    12/4/12 9:54:10.038 PM mDNSResponder[36]: D2DInitialize succeeded
    12/4/12 9:54:10.264 PM awacsd[53]: Starting awacsd connectivity-77 (Jun 20 2012 15:40:49)
    12/4/12 9:54:10.345 PM locationd[40]: NOTICE,Location icon should now be in state 0
    12/4/12 9:54:10.346 PM awacsd[53]: InnerStore CopyAllZones: no info in Dynamic Store
    12/4/12 9:54:10.521 PM apsd[55]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    12/4/12 9:54:10.521 PM apsd[55]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    12/4/12 9:54:11.000 PM kernel[0]: [ffffff801658c800][BNB

    Please do not post the entire messages log as it takes up unnecessarily a lot of space.  It seems that there is a corrupt/nonfunctional file called
    [email protected]nt.plist
    Go to your hard drive, enter library, go into users, and go into launch agents and delete the thing above.  Empty the trash and restart.

  • Connecting Macbook Pro 15" to Samsung HDTV - Audio Problem

    Hey guys,
    I'm new to these forums so I hope i'm posting this in the correct section! On to my problem...I have a MacBook Pro 15" 2.8 GHz- Late 2009 (model: MB986LL/A) and I'm currently trying to connect it to my new TV which is a Samsung LCD HDTV (model: LN46C610).
    The video connection is perfect. I'm using Apple's Mini-DisplayPort to DVI, via DVI to HDMI to my TV.
    The audio connection for some reason is not working.
    I've tired using an RCA cable, which has a regular audio jack on one end, and the 2 coloured wires (yellow + red) at the other end. No luck.
    Now I was told to buy a Mini-Toslink cable to connect from my TV to my MBP. I've plugged the Optical Cable into the TV and the other end to my MBP. Yet I still have no sound.
    Can anyone please guide me on how to set this up? Maybe i'm doing something wrong or i'm using the wrong cable. Any help would be greatly appreciated!
    Thanks!
    Karman

    Ok i'm in the Utility but i'm confused...where would I go to select it to change the output?
    Because everywhere i've tried...I don't see an option to change it...
    *EDIT: ok I've noticed when I plug in the mini-toslink cable to my MBP, i notice the output source changes from Internal Speakers to Digital Output*
    *EDIT #2: Still no sound when I do that...also on the back of my TV, the digital output connection use to have a red light in it, and now it doesn't anymore?*
    null

  • Macbook Pro 13 inch & External Display - resolution problem

    Hi
    I'm trying to connect my macbook pro 13inch to an NEC 26' Multisync display - which has a native resolution of 1900 x 1200 - and when connected to a PC this is what I get. When I connect the mac though the top resolution is 1900 x 1080 - so the display is distorted.
    I've tried finding diplay drivers for the monitor and graphics card without success. Apparently the GEForce 9400 graphics in the macbook can output up to 2500 x 1600.
    I'm wondering if it's the connection method - I'm using the mini display to VGA adapter that I got with the macbook. Do I need to use the alternative adapter - the mini display port to DVI adapter? Seems this is needed for connection to 'advanced' displays. Will this make any difference or is it that the macbook 13 inch can't output to a 26in display?
    Any advice or assistance will be greatly appreciated
    Many Thanks
    Tim Gundry

    I would get the DVI regardless.
    Your taking a digital signal from the macbook, converting to to anolage VGA, and the the monitor is converting it back to digital again to display on the screen.
    DVI will make it direct digital to digital.
    Plus, because DVI is digital, is passes resolution information. So you should get your native resolution no problem.

  • Macbook Pro (15" mid 2012) system freezing problems

    I've had quite an ordeal with my Macbook Pro over the last few years, so this will be a lengthy question, sorry in advance. Let me get right to it.
    Backstory:
    I bought my MBP 15" new in summer of 2012. I installed 8GB ram that I had laying around. A week or so later I was playing a game (Borderlands) and my computer froze and I was forced to do a hard reset. From then on the computer started completely freezing more and more consistently, and not just with games, but while I was on the internet and in other programs such as Adobe Photoshop and Premiere. and I was forced to do hard restarts often.
    I upgraded to Mountain Lion when it came out, and the problem persisted. The freezing got to the point where the screen would pixelate and get full of artifacts and blocks of glitchy colors while the sound started looping and popping until I did the hard restart. I took the computer into the apple store and they ran some tests and told me that the 8GB of ram I had put in was the wrong speed for my computer, but that as long as I changed it I shouldn't have any problems. I went home, changed my ram back to the original ram that came with my computer, and lo and behold, it got worse. it started to freeze on startup and I would have to try multiple times before it would start up, sometimes it would give me the three beeps, so I knew it was a memory problem. So I bought 16GB of the correct type of ram (1600mhz instead of the 1333mhz) and the problem seemed to stop for a few weeks. Then it started again, slow at first and then in waves where it would freeze multiple times in a row and then not at all for days or even weeks. So i took the ram out and cleaned it, thinking that it might be the ram slots acting up or a bad connection, that wasn't it. I took it back into the store to be tested, but they couldn't reproduce the freezing I had, which is just my luck..soon after that my warranty ran out, so I was on my own. I started to just deal with it because it started happening less often. Finally at the end of this summer I reinstalled OS X Mavericks because I read somewhere that someone was having a similar problem and that fixed it. I did a clean reinstall and it started running great. I started reinstalling the main programs I use (Adobe CS6, Steam, a few games, firefox, VLC, ZBrush) and it was still working fine. I played Borderlands 1 on it and it froze the entire computer soon after I started playing. I thought that might just be because that game is a port and I bought it through the Appstore. So I took it easy and the computer did well. Then I started playing Borderlands 2 (on the lowest settings to be safe) and the computer worked great, even though I played for 3 or 4 hours at a time. I thought all was well now. That was until I came back to school and then last night my computer started freezing again. It is not as bad as before, and I've only been able to reproduce it consistently while playing Borderlands 2, but it bothers me that my computer is not solid, even if it doesn't freeze doing most other things.
    If I thought it would be fine if I stopped playing games on it, then I would stop and be fine with that, but I think the problem is bigger than that, and that is why I am asking for help.
    What I've Tried So Far (in order, kind of):
    1. Changed the ram to 8GB 1333mhz - computer started freezing after that
    2. Took it to the Apple store to get it checked out - they told me it was the ram
    3. I changed the ram back to 4GB 1600mhz - froze worse than before
    4. Bought and put in 16GB 1600mhz - ran fine for a time, then started again
    5. Took it back to the Apple store - Didn't reproduce the results
    6. Uninstalled all games - didn't change anything
    7. Reinstalled OS X Mavericks - Ran fine for a little while, now freezing during games again.
    8. Ran Apple Hardware Test multiple times during all this, it would start and then freeze around 8 minutes in.
    9. Booted in Internet Recovery mode - froze every time and gives me error code -3404D now, which I can't find any information about online.
    10. Ran MemTest through Rember multiple times. Before reinstalling OS X it froze every time, now my ram passes every time.
    11. Checked Activity Monitor, and ran EtreCheck - I'll post the results below, but everything seems normal to me.
    12. Checked memory usage while playing Borderlands 2 (windowed, lowest settings still) the game was using about 1GB of ram, then my computer froze after playing for about 2 minutes.
    13. Also I've taken my ram out and cleaned everything, including fans multiple times throughout this ordeal. My computer would get pretty hot at one point, and I thought it was overheating and maybe disconnecting some solder, so I used to turn it on its side and put a fan on it to cool it down and it would finally restart, but that was before reinstalling OS X and it hasn't been getting that hot recently.
    EtreCheck Results as of right now:
    EtreCheck version: 1.9.15 (52)
    Report generated August 27, 2014 at 11:06:56 AM EDT
    Hardware Information: ?
        MacBook Pro (15-inch, Mid 2012) (Verified)
        MacBook Pro - model: MacBookPro9,1
        1 2.3 GHz Intel Core i7 CPU: 4 cores
        16 GB RAM
    Video Information: ?
        Intel HD Graphics 4000 - VRAM: (null)
            Color LCD 1440 x 900
        NVIDIA GeForce GT 650M - VRAM: 512 MB
    System Software: ?
        OS X 10.9.4 (13E28) - Uptime: 0 days 1:14:7
    Disk Information: ?
        APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
        S.M.A.R.T. Status: Verified
            EFI (disk0s1) <not mounted>: 209.7 MB
            Macintosh HD (disk0s2) / [Startup]: 499.25 GB (395.43 GB free)
            Recovery HD (disk0s3) <not mounted>: 650 MB
        HL-DT-ST DVDRW  GS31N
    USB Information: ?
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
        Microsoft Basic Optical Mouse
    Thunderbolt Information: ?
        Apple Inc. thunderbolt_bus
    Configuration files: ?
        /etc/hosts - Count: 6
    Gatekeeper: ?
        Anywhere
    Launch Daemons: ?
        [loaded]    com.adobe.fpsaud.plist Support
        [loaded]    com.adobe.SwitchBoard.plist Support
        [loaded]    com.microsoft.office.licensing.helper.plist Support
        [loaded]    com.oracle.java.Helper-Tool.plist Support
    Launch Agents: ?
        [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
        [loaded]    com.oracle.java.Java-Updater.plist Support
    User Launch Agents: ?
        [loaded]    com.adobe.AAM.Updater-1.0.plist Support
        [loaded]    com.google.keystone.agent.plist Support
        [running]    com.spotify.webhelper.plist Support
        [loaded]    com.valvesoftware.steamclean.plist Support
    User Login Items: ?
        iTunesHelper
        TuneupMyMac
        Google Drive
    Internet Plug-ins: ?
        AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Support
        FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
        QuickTime Plugin: Version: 7.7.3
        Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
        AdobePDFViewer: Version: 10.1.1 Support
        Default Browser: Version: 537 - SDK 10.9
        SharePointBrowserPlugin: Version: 14.0.0 Support
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
        JavaAppletPlugin: Version: Java 7 Update 67 Check version
    Audio Plug-ins: ?
        BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
        AirPlay: Version: 2.0 - SDK 10.9
        AppleAVBAudio: Version: 203.2 - SDK 10.9
        iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
        Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
        Flash Player  Support
        Java  Support
        MusicManager  Support
    Time Machine: ?
        Time Machine not configured!
    Top Processes by CPU: ?
            22%    firefox
             4%    WindowServer
             2%    hidd
             1%    fontd
             0%    mds
    Top Processes by Memory: ?
        573 MB    firefox
        115 MB    installd
        82 MB    mds_stores
        82 MB    Finder
        82 MB    WindowServer
    Virtual Memory Information: ?
        11.57 GB    Free RAM
        2.21 GB    Active RAM
        1.13 GB    Inactive RAM
        1.08 GB    Wired RAM
        360 MB    Page-ins
        0 B    Page-outs
    Let me end by saying thank you in advance. I take pretty great care of this computer (besides mistakenly installing the wrong ram) and physically it is in great condition. I appreciate any help.
    MacBook Pro (15-inch, Mid 2012), iOS 6

    Hi Fonden,
    It sounds like you have been on the right track in troubleshooting this issue. If the crashing or hanging persists, you may want to double-check the troubleshooting steps outlined in the following article:
    OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem."
    http://support.apple.com/kb/HT200553
    Regards,
    - Brenden

  • I have a MacBook Pro and I seem to have problems with my FaceTime. It want me to enter my apple ID, but when I do it comes up with a msg that says, "The server encountered an error processing registration. Try again later." What do I need to do?

    I have a MacBook Pro and have problems using my Facetime. Last time I used it without problems. Now I am trying to use it, and it is asking that I enter my Apple ID. When doing so, it comes up with a message that says, "The server encountered an error processing registrion. Try again later." What does this mean, and how do I fix it? Thanks.

    I had the same problem and found the solution here:
    https://discussions.apple.com/thread/3189272

  • Safari crashes my macbook pro, it "restarts because of a problem," I think it is a kernel panic. How do I manage this?

    I have a late 2011 15", 2.3 GHZ intel core i7 macbook pro with 16GB of ram. I recently partitioned the computer using bootcamp and before doing this had the computer upgraded to Mavericks 10.9.5 . In order to partition my computer we had to restore it to factory settings so there is almost nothing on here.. my safari and google chrome were crashing before all these changes and my computer was sometimes "restarting because of a problem". I think most times that it did this I had safari or chrome up and running or at least open in the background. I also recently had someone test my hard drive and nothing is wrong with that so I believe this is some sort of software problem.
    Now my google chrome works as long as I am not signed into my account, but safari is un-usable. It crashes and then makes my computer "restart because of a problem." the computer seems to be fine besides these web browsing issues.
    I have disabled my extensions for safari but none were listed to disable anyways. I have the lengthy crash report from a recent crash and will post if needed.
    Thank you!

    Thank you for your response!! I will definitely try that out. Here is the error:
    Anonymous UUID: 6FD5C430-62AC-79AC-471A-E49A0ED4F778
    Sat Dec 20 21:41:51 2014
    panic(cpu 0 caller 0xffffff80096c63e7): "pmap_page_protect() " "pmap=0xffffff80358564b8 pn=0x600b2 vaddr=0x1763f1000\n"@/SourceCache/xnu/xnu-2422.115.4/osfmk/i386/pmap_x86_common .c:1336
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81f5853a50 : 0xffffff8009622f79
    0xffffff81f5853ad0 : 0xffffff80096c63e7
    0xffffff81f5853b90 : 0xffffff80096922f3
    0xffffff81f5853bf0 : 0xffffff8009692626
    0xffffff81f5853c60 : 0xffffff800968525e
    0xffffff81f5853d50 : 0xffffff8009687150
    0xffffff81f5853de0 : 0xffffff800963cd5e
    0xffffff81f5853e30 : 0xffffff80099d3447
    0xffffff81f5853e60 : 0xffffff80099d3240
    0xffffff81f5853ea0 : 0xffffff80099d2867
    0xffffff81f5853f00 : 0xffffff80099d3569
    0xffffff81f5853f50 : 0xffffff8009a40c63
    0xffffff81f5853fb0 : 0xffffff80096f4176
    BSD process name corresponding to current thread: coreservicesd
    Mac OS version:
    13F34
    Kernel version:
    Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
    Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
    Kernel slide: 0x0000000009400000
    Kernel text base: 0xffffff8009600000
    System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
    System uptime in nanoseconds: 12693878949245
    last loaded kext at 10026402479079: com.apple.filesystems.smbfs     2.0.3 (addr 0xffffff7f8bf72000, size 335872)
    last unloaded kext at 399101944447: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f8bf72000, size 57344)
    loaded kexts:
    com.apple.filesystems.smbfs            2.0.3
    com.apple.driver.AudioAUUC           1.60
    com.apple.filesystems.ntfs    3.11
    com.apple.driver.AppleHWSensor   1.9.5d0
    com.apple.driver.AGPM        100.14.34
    com.apple.filesystems.autofs            3.0
    com.apple.iokit.IOBluetoothSerialManager            4.2.7f3
    com.apple.driver.AppleMikeyHIDDriver     124
    com.apple.driver.AppleMikeyDriver           2.6.3f4
    com.apple.driver.AppleHDA 2.6.3f4
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.iokit.IOUserEthernet       1.0.0d1
    com.apple.driver.AppleIntelHD3000Graphics       8.2.4
    com.apple.kext.AMDFramebuffer    1.2.4
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport           4.2.7f3
    com.apple.driver.AppleSMCLMU     2.0.4d1
    com.apple.Dont_Steal_Mac_OS_X      7.0.0
    com.apple.driver.AppleHWAccess   1
    com.apple.driver.SMCMotionSensor           3.0.4d1
    com.apple.driver.AppleMuxControl            3.6.22
    com.apple.driver.AppleLPC  1.7.0
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleIntelSNBGraphicsFB          8.2.4
    com.apple.driver.AppleMCCSControl          1.2.5
    com.apple.driver.AppleSMCPDRC   1.0.0
    com.apple.AMDRadeonX3000         1.2.4
    com.apple.kext.AMD6000Controller           1.2.4
    com.apple.driver.AppleThunderboltIP       1.1.2
    com.apple.driver.AppleUSBTCButtons        240.2
    com.apple.driver.AppleUSBTCKeyboard    240.2
    com.apple.driver.AppleIRController            325.7
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless      1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN           1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib  1.0.0d1
    com.apple.BootCache            35
    com.apple.iokit.SCSITaskUserClient            3.6.7
    com.apple.driver.XsanFilter 404
    com.apple.driver.AppleUSBHub      683.4.0
    com.apple.iokit.IOAHCIBlockStorage           2.6.0
    com.apple.driver.AppleSDXC           1.5.2
    com.apple.iokit.AppleBCM5701Ethernet   3.8.1b2
    com.apple.driver.AppleFWOHCI      5.0.2
    com.apple.driver.AirPort.Brcm4331           700.20.22
    com.apple.driver.AppleAHCIPort     3.0.5
    com.apple.driver.AppleUSBEHCI     660.4.0
    com.apple.driver.AppleSmartBatteryManager      161.0.0
    com.apple.driver.AppleRTC  2.0
    com.apple.driver.AppleACPIButtons           2.0
    com.apple.driver.AppleHPET           1.8
    com.apple.driver.AppleSMBIOS       2.1
    com.apple.driver.AppleACPIEC        2.0
    com.apple.driver.AppleAPIC            1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          217.92.1
    com.apple.nke.applicationfirewall   153
    com.apple.security.quarantine        3
    com.apple.driver.AppleIntelCPUPowerManagement        217.92.1
    com.apple.kext.triggers         1.0
    com.apple.iokit.IOSerialFamily         10.0.7
    com.apple.driver.DspFuncLib          2.6.3f4
    com.apple.vecLib.kext           1.0.0
    com.apple.iokit.IOAudioFamily         1.9.7fc2
    com.apple.kext.OSvKernDSPLib      1.14
    com.apple.iokit.IOFireWireIP           2.2.6
    com.apple.iokit.IOSurface     91.1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport            4.2.7f3
    com.apple.iokit.IOBluetoothFamily  4.2.7f3
    com.apple.driver.AppleBacklightExpert     1.0.4
    com.apple.iokit.IONDRVSupport      2.4.1
    com.apple.driver.AppleGraphicsControl     3.6.22
    com.apple.driver.AppleSMC 3.1.8
    com.apple.driver.IOPlatformPluginLegacy 1.0.0
    com.apple.driver.AppleSMBusPCI   1.0.12d1
    com.apple.driver.AppleSMBusController    1.0.12d1
    com.apple.driver.IOPlatformPluginFamily 5.7.1d6
    com.apple.iokit.IOAcceleratorFamily           98.23
    com.apple.kext.AMDSupport            1.2.4
    com.apple.AppleGraphicsDeviceControl     3.6.22
    com.apple.driver.AppleHDAController        2.6.3f4
    com.apple.iokit.IOGraphicsFamily    2.4.1
    com.apple.iokit.IOHDAFamily           2.6.3f4
    com.apple.driver.AppleThunderboltDPInAdapter            3.1.7
    com.apple.driver.AppleThunderboltDPOutAdapter         3.1.7
    com.apple.driver.AppleThunderboltDPAdapterFamily    3.1.7
    com.apple.driver.AppleThunderboltPCIDownAdapter     1.4.5
    com.apple.driver.AppleUSBMultitouch       240.10
    com.apple.iokit.IOUSBHIDDriver     660.4.0
    com.apple.driver.AppleUSBMergeNub       650.4.0
    com.apple.driver.AppleUSBComposite        656.4.1
    com.apple.iokit.IOSCSIMultimediaCommandsDevice        3.6.7
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.driver.AppleThunderboltNHI    2.0.1
    com.apple.iokit.IOThunderboltFamily         3.3.1
    com.apple.iokit.IOAHCISerialATAPI 2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily   3.6.7
    com.apple.iokit.IOUSBUserClient     660.4.2
    com.apple.iokit.IOEthernetAVBController  1.0.3b4
    com.apple.driver.mDNSOffloadUserClient 1.0.1b5
    com.apple.iokit.IOFireWireFamily    4.5.5
    com.apple.iokit.IO80211Family       640.36
    com.apple.iokit.IONetworkingFamily           3.2
    com.apple.iokit.IOAHCIFamily          2.6.5
    com.apple.iokit.IOUSBFamily            686.4.1
    com.apple.driver.AppleEFINVRAM  2.0
    com.apple.driver.AppleEFIRuntime            2.0
    com.apple.iokit.IOHIDFamily            2.0.0
    com.apple.iokit.IOSMBusFamily       1.1
    com.apple.security.sandbox 278.11.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet     7
    com.apple.driver.AppleKeyStore     2
    com.apple.driver.DiskImages           371.1
    com.apple.iokit.IOStorageFamily      1.9
    com.apple.iokit.IOReportFamily       23
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform         2.0
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.pthread          1
    com.apple.kec.corecrypto     1.0
    Model: MacBookPro8,2, BootROM MBP81.0047.B1E, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, SMC 1.69f1
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
    Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
    Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1333 MHz, 0x85F7, 0x483634314755363746393333334700000000
    Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1333 MHz, 0x85F7, 0x483634314755363746393333334700000000
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.7f3 14616, 3 services, 23 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: TOSHIBA MK7559GSXF, 750.16 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: Hub
    USB Device: BRCM2070 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Apple Internal Keyboard / Trackpad
    USB Device: Hub
    USB Device: IR Receiver
    Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1

  • MacBook Pro not booting - trying to isolate problem

    Hi all,
    So I am having major issues with my mid 2009 MacBook Pro. I will try to be as concise as possible and any, ANY input wil be greatly appreciated.
    Last week I opened my computer from sleep (a USB stick was inserted) - It would not boot up and would reset itself. Every time I tried to start my computer I would see the grey screen, apple logo and spinning symbol below it. It would then soon restart itself.
    I did many different 'resets' (NVRAM, Safe mode, Recovery Mode, Hardware Test). The Hardware test said everything was OK.
    I further located my original OSX install CD and attempted to boot from that. I got past the spinning logo and into the OSX install phase. From here I checked Disc Utility and my internal hard drive was detected, with one partition (for some reason named disk0s2). I could perform a 'verify' on the partition - it told me there was disk errors and it needed to be repaired. On trying to 'repair' the partition/disk, it would freeze halfway through. I attempted this multiple times. If I tried to 'erase' the disk/partition, it wouldnt let me and would fail. If I tried to partition the disk it would fail and say it could not allocate memory (it would continually say 'unmounting disk'. If I attempted to use the boot CD and install a new version of OSX there would be NO target disk available for me to select. It seemed as if it would discover it in disk utility yet not in this function.
    I further removed the internal hard drive from my computer and plugged it into a windows based computer via USB adapter. The drive was detected and I was able to format it in Windows formats.
    I then had no ideas so I took my computer to Apple Genius Bar and they did some minimal tests on it, claiming it was most likely the hard drive failing. They tried to sell me a new drive but I decided to go to a computer store and try a new drive before I bought. I received the same errors with the new SSD drive that I installed at the computer store. This made me think my hard drive was in fact, OK.
    I went home and decided to format my (apparently dead) hard drive on my friends macbook, through USB connection. I partioned the drive with ONE partition (GUID partition) on MacOSx Extended (journaled). It allowed me to do this successfully.
    Now I thought I had it solved. I put the hard drive back in my computer with my OSX boot CD and guess what, It froze on the greay screen with the apple logo after about one minute. This happened multiple times. I then removed the drive and tried to boot again, this time it went through to the OSX install options! Why is it not reading my drive on the format it REQUIRES!? I tried to isolate the problem even further and removed the drive to try connecting it by USB and booting up. This was successful!! It read the drive and allows me to install OSX on it.
    SO - to sum up:
    *My MacBook would boot when the drive when it was formatted as NTFS from a windows format.
    *It wouldnt let me repair, erase or partition the disc, although WAS recognised in disc utility.
    *A new SSD drive installed was recognised in disc utility yet had the same restrictions on partitioning.
    *My hard drive appears to be fine as I plugged it into another mac and successfully partitioned it to MAC OSX extended (journaled).
    *After this it WASNT Recognised at all in my Mac and froze the startup (a completely new problem)
    *My Computer would boot and discover the drive when plugged in via USB.
    I want to know what is going on. Is an internal cable faulty? Is a board faulty? Why would it recognise the drive internally before yet not after it was formatted as MacOsx Extended? The hardwarte tests claim there are no errors.
    PLEASE, I need assistance! Apologies on the long post yet I need to make sure I explain all faults and action taken by me. I thank eveyone in advance and hope someone can help.
    Cheers

    The 2009's are notorious for SATA cable problems, which this very much sounds like. Don't apologize for the lengthy post. You did a nice job in descrbing the problem and in the steps you've taken so far. If the drive works correctly in an enclosure and you're able to format and boot from it, it's almost certain to be the cable.
    You can find both the repair procedure and the part on ifixit.com by identifying your exact machine. I didn't see whether it was a 15" or 13" so I didn't look it up for you. I suggest you shop around once you find the part number, ifixit tends to be a little high.

  • MacBook Pro 13'' late 2011 start up problem.

    I have 2 MacBook Pro 13.
    Once of my MacBook Pro(1st) start up time takes me about 30 sec and shutdown time takes just about 3-5 second.
    Another MacBook Pro(2nd) start up time take me about 50 second and shutdown times takes about 20 second.
    I have download a sftware called CleanGenuise PRO from app store on my 2nd MacBook Pro and I keep clicking empty free space and delete, it this cause startup problem?
    IF CANNOT SOLVE THIS PROBLEM.
    Can anyone TEACH me how to REINSTALL Mac OSX Lion?
    Sorry for my poor english. Anyway PLEASE HELP! Thanks
    1st MacBook Pro Spec
    Core i5 4GB RAM 500GB HDD
    450 GB free out of 500 GB
    2nd MacBook Pro Spec
    Core i5 4GB RAM 500 GB
    377 GB free out of 500 GB

    To reinstall Lion, hold down COMMAND 'R' keys when you start up your MBP.  See this link:
    http://www.apple.com/macosx/recovery/
    Why one of your MBPs is faster on boot and shutdown times could be due to a number of factors.  Different OS, amount of data on the HDD, hardware specifications and so forth.  Even the slow one seems to me to be within acceptable norms.
    I am suspicious of any 'cleaning' or 'performance' software.  If you want to find files to delete, I suggest you download from the Internet OmniDiskSweeper (free) and open it.  It will show you all of your files and their respective sizes.
    Ciao.

  • Macbook Pro Retina (late 2013) sleep wake problems under Yosemite

    Hi,
    Ever since I installed Yosemite on my MBP (details in the screen shot below), I've been getting Sleep Wake problems.  At night, I simply close the lid of the laptop, leaving all applications running, and in the morning I wake it up.  This worked fine under Mavericks on this laptop, but since Yosemite, every time I open the lid, I've had problems.  Initially, I'd open the lid and the machine would restore from what looked like a deep sleep (screen would get an alpha layer on it, and the little progress bar would appear, as though it's waking from the battery running out).  I ran Disk Utility, which found and repaired an issue on the disk (can't remember the details, unfortunately), and ever since then, when I open the lid, I have to hit the power button to get the machine going.  It restores in about 15 seconds (nice and fast), and it does re-launch all of the applications I had open, but the machine will also show a little system alert, indicating a "Sleep Wake Problem".  Each time I see it, I submit the issue to Apple.  Because I'm an idiot, I forgot to copy the crash log from this morning, but I'll do that tomorrow and append it to this thread.  Meanwhile, if anybody is having a similar experience and can isolate the cause, I'd love to know.  A few variables which might matter:
    * I have a Thunderbolt external hard drive which I use for Time Machine.  Each night, I eject the disk before shutting the laptop down (I bring the machine home with me each night).  My laptop used to have issues ejecting external disks, which I traced (thanks to this board) to an issue with attempting to put an external drive to sleep (I think that was the issue).  I haven't had any issues since that time.
    * The apps I have running all the time are Mail, Safari, Coda (text editor) and VMWare 8, which is running a Windows7 VM.  That's been my environment for years now, yet the sleep-wake issue only started since upgrading to Yosemite.
    Any help/advice is appreciated.
    Thanks!

    Hi Ben,
    Another sleep issue and adding to your post... My MacBook Pro (2.7ghz early 2011)
    Leaving apps open and closing the "lid" and then going to bed... several times thru out the night my MacBook will start to wake up.  The optical drive spins up (DVD is in the drive), the hard drive fires up, I think i can see the screen glow ("lid" is still closed).   Then it sets itself back to sleep (must detect the closed lid).
    Did not do this with Mavericks or other earlier OSs. 
    I have not begun to try to figure this out... today is the day!  lol. 

Maybe you are looking for

  • How to do parameter binding in web dynpro

    My Web Service expects an input  object called "Token " which consistes of Token id, Provider - both strings Web service is checkUser I did mapping and all those things . In my UI(automatically created), i'll take the input from user for Token id and

  • Custome Error Handling in OWD Data Adaptor Plugin

    Hi, Does the Oracle web determination allow to customize error or exception message, while loadins/saving the interview session data. while loading some session data for a caseid if certain functional error throws, then can I telll the OWD to display

  • I want to run Quicken through Windows on my macbook pro, whats the best way to do this?

    I want to run Quicken 2012 through Windows on my macbook pro, whats the best way to do this? I have been looking at Parallels or VMware in order to use Windows but then I will also need to get a Windows license. Just looking for the most inexpensive

  • How to update GRPO baseref field manually

    Dear All, We are creating PO using DTW option. Minimum line items in PO is 500. While posting GRPO by using Copy from option, it is very difficult for us to find the line items in the wizard. We also have partial receipts against PO. We want a option

  • Reqimport process

    Hai all, any one please help regarding Requisition import process,how to create internal sales order through requisition import, please any one help what is the process and how concurrent programs run internally create the internal sales order. Thank