Macbook Pro 10.7.5, need to clone hard drive with two partitions?

I have a Macbook Pro running 10.7.5. I have two partitions on the current 750GB drive and just purchased a Samsung 750GB SSD. I want to do an exact clone to the new drive but am struggling with the fact that I have two partitions on the current drive and seemingly all the advice talks about cloning the Macintosh HD only.
I need to clone both partitions to the new SSD. I can't, don't want to, reinstall anything.
Is there a way to clone the entire drive, not just the boot partition?
Thanks!!!

bubsnews wrote:
...Weird as all the word on the internet is how difficult it is to clone the Win installation, am I missing something?...
When cloning difficulties with Win installations are discussed, it's almost always Boot Camp. Virtual Machines are just really big files which can be copied and moved like any other file (though Parallels or VMware Fusion will detect that and ask if you've copied or moved the file and getting the answer right is important). That's just one of the many virtues of virtual machines - easy cloning and duplication.
... All reports show the EVO as the faster of the two drives but I swear the M500 is much faster on my desktop (Win7 Pro) than the EVO was. I mean they both are fast but, as an example, launching DVD Profiler Pro with over 4,000 entries would take the EVO 19 seconds or so, but the M500 does it in about 13 seconds...
That is puzzling because looking at this review for example, the Samsung does come in ahead of the M500 most of the time.
...Do you have any other advice to ensure I'm getting the most out of the SSD and my Macbook, 10.7.5?...
Normally I'd suggest activating TRIM but you've already done that. And while any update would disable TRIM, if you're using TRIM Enabler, that pops up to let you know TRIM needs to be turned on again. But since you've reached the end of the update line with Lion, that only applies if you move to Mountain Lion or Mavericks. However, if you're booting from a different drive to work on the SSD, TRIM needs to be enabled on that drive too. Even if it's a HD, the OS will use TRIM on the SSD you're working on.
The only thing that comes to mind is not to fill the SSD to the brim with files. There are fundamental differences between SSD's and hard disks and for best performance, that needs to be respected. This discussion goes into some detail so you can appreciate what the SSD controller has to do.

Similar Messages

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

MacBook Pro (13-inch, Mid 2009) - Maximum internal hard drive size and speed?

What is the maximum size of hard drive and speed for an internal hard drive to my Macbook Pro (13 inch, Mid 2009), please?
I bought myself a Technics 1TB, 7200 rpm internal hardrive. Made a clone successfully in Super Duper.
It fits, but It is not available for starting up my Macbook Pro. Not available in System Prefs, but visible and grey in Disc Utility.
Although it starts up my Mac Pro just fine.. but not my Macbook Pro.
Is there a limit of hard drive specifics?
What is the maximum size of hard drive and speed for an internal hard drive to my Macbook Pro (13 inch, Mid 2009), please?

Thanks for the reply
I cloned the Technics HDD ( 2,5" HGST Travelstar 7K1000 - 1 TB : HTS721010A9E630) from the MBP.
I tried to boot it up with my Technincs ( 2,5" HGST Travelstar 7K1000 - 1 TB : HTS721010A9E630) installed in my MBP (as my internal hard drive).

My MacBook Pro no longer "sees" my LACie external hard drive

Hello,
I need you help with this one. My MacBook Pro no longer "sees" my LACie external hard drive. In the System Profiler (under FireWire) the drive is listed as:
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
Unknown Device:
Manufacturer: Unknown
Model: Unknown
Maximum Speed: Up to 800 Mb/sec
Connection Speed: Unknown
Can anyone help me to correct this issue? Thank you in advance for your help!!
Nat

I was finally able to resolve this issue. I went to LaCie's site and went to the support area to find troubleshooting steps for my particular drive. It turns out that the problem was corrected when I swapped the power supply cord of the "troubled" drive with another LaCie drive that I have and that seemed to resolve the problem. Thank you Tony for your help. I appreciate you guys!
Thanks,
Nat

I want to keep my music on my macbook pro and my movies on my external hard drive.

I want to keep my music on my macbook pro and my movies on my external hard drive how do i get itunes to recogonise my external hard drive.? so i can drag more movies across later. i am able to plug my external into my Apple Express to stream to my apple TV arent i..???

michols wrote:
I want to keep my music on my macbook pro and my movies on my external hard drive how do i get itunes to recogonise my external hard drive.?
iTunes > preferences > advanced.
point iTunes media folder location to the external
on the same tab, ensure the copy files ... when adding option is checkmarked
okay out of preferences
highlight the content to be moved (i.e. the movies) in iTunes and right-click
select consolidate files from the pop-up menu
wait for the process to finish
when done, you may delete the original files from your boot drive. you may also want to point iTunes media folder location back to your local iTunes folder.
i am able to plug my external into my Apple Express to stream to my apple TV arent i..???
no. airport express does not support the airdisk feature. you'd need an airport extreme (or time capsule) for that.

After I installed Lion, my MacBook Pro can no longer detect my external hard drives or my USB flash drives. What should I do?

After I installed Lion, my MacBook Pro can no longer detect my external hard drives or my USB flash drives. What should I do?

And me -- My Mac at work running Snow Leopard reads the drive normally. My home Mac (on Lion) can't even find it....
Yet another Leo let-down.....

I have a macbook pro, and i want to transfer my hard drive from my macbook, but the display drivers and such are different. How do i do this?

I have a macbook pro, and i want to transfer my hard drive from my macbook (500g), but the display drivers and such are different. How do i do this and is it possible?
The Macbook Pro has Mac OS X 10.4.11 (70g hard drive)
The Macbook has Mac OS X 10.6.8 (500g hard drive)

The MacBook's hard drive lacks the necessary hardware drivers to boot the MacBook Pro even though it has a much newer OS on it; that's why simply moving it into the Pro doesn't work. Presumably you have a very old MB Pro, because only the very first MB Pro model (produced January to May 2006) was ever offered with an 80GB hard drive. Are you sure you want to move your big drive into such an old machine? The MacBook must be newer, because the first MacBook was introduced just as the first Pro model was discontinued.

I have a 15" MacBook Pro with Mountain Lion installed. I have partitioned the hard drive into two partitions. Is it possible to install Snow Leopard on the second partition? If so how do I do it?

I have a 15" MacBook Pro with Mountain Lion installed. I have partitioned the hard drive into two partitions. Is it possible to install Snow Leopard on the second partition? If so how do I do it?

If your MacBook Pro had Snow Leopard on it at one time then sure. (Early 2011 or earlier)
How to erase and install Snow Leopard 10.6
Obviously choose the second partition to install into. It has to be OS X Extended journaled formatted in Disk Utility (BootCamp software makes it a MSDOS/FAT32 formatted partition if you used that to partition with)
If it's a Early 2011 or Late 2011 that came with 10.7, it's possible, but it's not easy.
https://discussions.apple.com/thread/3264421?start=0&tstart=0
If you can't install Snow Leopard, there is a thread over at MacRumors how to run Snow Leopard in a virtual machine program under 10.7 or 10.8

I've ordered a new mac book pro 15" and i need to clean hard drive off my old PC...not really to move them to the mac, but just to save in case needed; mostly pics and office docs....any suggestions?

I've ordered a new mac book pro 15" and i need to clean hard drive off my old PC...not really to move them to the mac, but just to save in case needed; mostly pics and office docs....any suggestions?

Buy an external USB hard drive and copy your data to it. Either that or burn them all to single or double layer DVDs (depending on amount of data you have). Or if it's really a small amount, consider putting it all on a USB memory stick.

How to backup MacBook Pro without AirPort Time Capsule or External hard drive

How to backup MacBook Pro without AirPort Time Capsule or External hard drive

This is crude but if you need a work around, just plug the USB drive directly into the iMac.. copy the files to it.. then plug it into the TC.
You also do not need to use the TC as an intermediary between your iMac and MBP.. just turn on sharing in the computer.. so you can directly copy files from one to the other.. Macs have public access directory preconfigured for each user account.
As far as mounting the TC..
In finder use Go, Connect to server.. and type.
AFP://TCname or TCipaddress
Where TCname is the actual name of the TC.. I strongly recommend you follow SMB network rules.. ie if your TC has a name like
Fred Blog's Time Capsule 2445566.
It is too long.. it has spaces and it has non-alphanumeric characters.
Shorten it to FredTC
No spaces no characters that are NOT alphanumeric.
TCIPaddress is simply the standard IP.
You can also use CIFS://TCname which according to the article forces the connection back to SMB1 rather than SMB2 which as usual is broken.
But I would definitely use AFP if possible. I cannot understand the decision to move to SMB as standard.

Mid 2009 macbook pro 13" not booting from Western digital hard drive

So i've gone ahead and purchased a Western digital 2.5 inch scorpio black 750gb 7200rpm sata 16mb internal hard drive to replace my critical status 160gb standard drive in my macbook.
I have followed a guide using a usb 2.0 enclosure, with my new hard drive then carbon cloner which does allow me to clone a copy of the existing hard drive, but... when i boot up the macbook holding the option key i get the external hard drive which i can select but then i go into a os x utilities screen and does not boot straight to finder.
I get four options and one of them is disc utilities, so assuming this process in't as straightforward as i'm led to believe?
I have partitioned the new hard drive with guid for intel macs so pleae can anyone help me before i just give up and take it to my local apple store?
Thanks matt.

I have just solved this problem, with a fresh head this morning i realised that the external drive was empty and the cloning process didn't complete for some reason?
Anyhow i ran the clone again and booted externally which worked so then replaced my old hard drive with the new scorpio black and wow what a difference! I had beachballing before as my old drive was critical but now with the with the new speed 7200rpm drive its flying, very happy:-)

I have a 13 inch macbook pro 2010 I want to switch the hard drive wat hard drive can i use i know i need a 2.5" but i dont know the dimensions of which one will fit?

Can someone tell me if anyone of these will fit with my 13 inch macbook pro 2010 model
http://www.memoryexpress.com/Products/PID-MX33160(ME).aspx
http://www.memoryexpress.com/Products/PID-MX31974(ME).aspx
Thanks everyone

The only thing is someone told me the max height for a hard drive for the macbook pro is 9.5mm and some other people tell me is 9mm but both drives are over 9 but the seagate one is 9.5 do you happen to know the max height thats my only concern really?

Do i need to shut down my macbook pro before carrying it around? Considering hard drive issues

I am a uni student. I have a MacBook Pro early 2011. been using it for 3 years now.
i have a couple questions just out of curiosity.
do we really have to shut down our mbpro before carrying it around?
couldnt we just leave it sleep mode?
i mean, is it harmful to our hard drives if we put our mbpro in sleep mode and move it around?
does apple have a mechanism that kinda "stops" the hard drives from spinning in sleep mode?
I wanna know for sure, since some told me that it's okay to move my mbpro around in sleep mode, and some told me that it's not okay and i have to shut it down first.
i did occasionally transport my mbpro in sleep mode.... and i think.... i'm having some hard drive issues.
Thanks before for your kind answers.
Best Regards,
Moses

Moses,
your MacBook Pro has a sudden movement sensor which will park your disk’s heads in case it senses a sudden G-force change. By default, this sensor will be active. Carrying around your MacBook Pro while it’s sleeping (and applying some common sense while doing so) should not be harmful to its hard drive.

Macbook Pro for HD video -memory and external hard drive questions?

Hi!
I am a Macbook user, but I plan to purchase a Macbook Pro since I am now doing a lot of HD (not HDV) video editing. I live outside of the U.S. and cannot call the Apple Store, so was wondering if anyone can provide advice on the forum.
I'm interested in either the 15-inch: 2.53GHz or 15-inch: 2.66GHz. is there a big difference in speed between these?
-Is the 4GB memory the MBP comes with enough for HD video editing purposes, or would I opt for the 8GB? (here prices becomes a bit of an issue)
- Is the 500GB Serial ATA Drive @ 5400 rpm sufficient or would I upgrade to the 500GB Serial ATA Drive @ 7200 rpm [Add $50.00]
-I want to purchase an external firewire drive to store my media on-does anyone know if the G-Raid 500 would be good? Portability is a big issue for me since I travel very often.
Thank you all so much for your help!!

I looked at the 15inch and 17inch but chose the 17inch - and I am a filmmaker. I too travel on location extensively and usually carry a 15inch due to size-weight - but the 17inch is much better for HD. The video card and screen resolution in the 17inch is much better than than the 15inch but what clinched it for me was the 17inch has a CF reader and the 15inch only has a small SD card reader.
Most video HD cams are shooting straight to CF cards now.
I also upgraded to the 7200 rpm drive - a wise choice for $50 extra.
Yes 4G ram will run Final Cut OK - but if you go from FCP to motion a lot then you will need 8G.

MacBook pro does not recognize my WD external hard drive anymore

I use TIme Machine on my WD external hard drive. Everything was working great up until about a month ago. My MacBook Pro does not recognize my external hard drive anymore...I have done nothing differently than usual. I did search in previous discussions and tried rebooting both the hard drive and the computer.
The USB port is fine as it does recognize another external hard drive and also pen drives....Please help! I haven't backed up in a month and need to figure out how to get this to work soon. Should I call WD?

Does the WD drive show in Disk Utility?
Many times, a USB port simply cannot provide the power a hard drive needs. It is not uncommon for any electric motor to draw more power as it ages. A drive that worked before can stop working when it gets older because age has made it tak more power than any USB port can supply. There are a couple of cheap things to try:
1) A "Y" USB cable---two plugs go to the computer and one to hte drive, giving a power boost.
1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
2) a POWERED USB hub. That takes the power delivery burden off the USB port so it can deal with data.
WD bare drives are fine but their enclosures are not very Mac-friendly. One thing that has reported helping is to get rid of the proprietary formating that WD puts on their drives. If you don't have to share the drive with a Windows computer, use Disk Utility to erase and reformat the drive to Macintosh Extended Journaled.

Macbook Pro 10.7.5, need to clone hard drive with two partitions?

Similar Messages

Maybe you are looking for