Macbook Pro 10.8 won't shut down. Gray screen with spinning wheel.

Previous it happened on 10.6.8 snow leppord.  I thought it might be the RAM problem, so i went ahead and purchased a 16GB RAM. Now I got the RAM up running, i upgraded the computer to 10.8 mountain lion. I thought the problem should be gone by now.  But somehow, it happened all over again, everytime when i use microsoft office 2011.  I even quit every single app fron the Active Monitor (include Active Monitor), and wait for about 5min before shutdown, the gray screen with spinning wheel appeared again. I repair the disk from recovery HD, according to that, there is no problem anymore. But, once again it happened after i used Microsoft office 2011. Is there anyways i could fix it? I suppose uninstall it will make it work, but it's vital.

Previous it happened on 10.6.8 snow leppord.  I thought it might be the RAM problem, so i went ahead and purchased a 16GB RAM. Now I got the RAM up running, i upgraded the computer to 10.8 mountain lion. I thought the problem should be gone by now.  But somehow, it happened all over again, everytime when i use microsoft office 2011.  I even quit every single app fron the Active Monitor (include Active Monitor), and wait for about 5min before shutdown, the gray screen with spinning wheel appeared again. I repair the disk from recovery HD, according to that, there is no problem anymore. But, once again it happened after i used Microsoft office 2011. Is there anyways i could fix it? I suppose uninstall it will make it work, but it's vital.

Similar Messages

  • Imac won't shut down, blue screen with spinig wheel is on and computer never shuts until I hold the power button down and shut it manualy..

    Imac won't shut down,
    blue screen with spinig wheel is on and computer never shuts until I hold the power button down and shut it manualy..

    This is the instruction article for Intel-based Macs:
    http://support.apple.com/kb/HT3964
    Your profile does not indicate the type of Mac you are using.
    Barry

  • My Macbook pro 13 inch is stuck on a gray screen with the apple logo, how do I fix this?

    Sooo, I was using my laptop for a while and the charger was kind of broken, it was dip in and out, and slowly I got a "Service Battery" notification. I updated my system and now everytime I try to boot up my computer it'd show a gray screen with the apple logo and a loading bar with a circular loading icon but it never actually boots up. It stays stuck at that loading screen. I don't think it's because I uploaded my system that it happened, but I'm wondering if it's because I didn't change my charger/battery, and I'm wondering if I have to get the harddrive changed or is there a way for me to recover my files and whatnot without having to whip it. Please help, and thanks in advice to any help offered.

    Dwaniej,
    you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the  OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get past the grey screen now?

  • Macbook Pro (A1278) - Unable to startup - stucks at Apple logo with spinning wheel.

    My friend gave me his macbook pro today having startup issue. It stucks on apple logo at startup with a spinning wheel.
    I have tried to repair disk but does not work.
    tried to reinstall OS but it says This Apple ID is not the one which you used to purchase this  OS version (something like that)
    I upgraded from mac os x lion to mountain lion.
    I do not have any installation media as well.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 6
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
    Step 8
    A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
    Step 9
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • IMac OS X Snow Leopard does not boot.  Turn on and it stays on gray screen with spinning wheel.  Shuts down after approx 1 minute.  How can I get in to troubleshoot?

    Need tips for troubleshooting

    Put the disk that came with the Mac in the DVD/CD drive and start up holding down Command+C and hopefully the Mac will boot, albeit very slowly.
    At the first screen choose your language (you are NOT going to re-install at this point) and from the menu bar select Utilities>Disk Utility. Once DU has launched select your Macintosh HD on the left and click on 'repair disk'. If it says it fixed anything click on 'repair disk' again until you get a clean pass. Restart as normal from the Apple menu.

  • After iOS5, iPhone 4 shuts down and hangs with spinning wheel

    This has happened twice so far. I'm not aware of any particular action that causes the problem. I know in both cases it happened while the iPhone had a good charge. Next time I looked at it, the screen showed the spinning wheel one normally sees during shutdown, but was stuck there.
    I'm surprised I'm not seeing this on the forum already. Anyone else?

    You're not alone Jason.  I've been having this problem after the second update for iOS5.  My Iphone had been working great and I became very attached to it.  Maybe you and I are the only ones to have this issue?
    For any future posters, I continue to have this problem after:
    - restoring my phone as a new device (not restoring settings\data from backup)
    - refrain from downloading any apps
    - ensuring apps are turned off when not using them
    This is affecting my job now where I'll probably have to buy a cheap phone to ensure my clients can always get a hold of me.  If you're reading Apple....please help us.

  • Macbook Pro 10.6.8 won't shut down. Blue screen with spinning wheel.

    it's an 15 inch macbook pro. since I bought this computer was working fine about last year. Somehow, start of this year, the problem begins. Everytime when i opened microsoft word 2011 on mac or Photoshop cs5, and quit the software as normaly. When i try to shut down the blue screen with spinning wheel apears. this spining wheel is endless. But funny thing is that after use other software such as games, web browser (safari) etc. and quit them. when i shut down there was not a problem. only word 2011 for mac and adobe photoshop cs5. Any solutions?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Step 1
    Select "system.log" from the file list. Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged during the time something abnormal was happening. That time might be before or after the boot.
    For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. If the problem is a system crash or freeze, post the messages from before the boot time, when the system was about to crash or was failing to shut down. In either case, please include the BOOT_TIME message at the beginning or the end of the log extract.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    If the log doesn't go back far enough in time, scroll down in the Console file list to /private/var/log/system.log.0.bz2. Search that archived log, and if necessary the older ones below it, for the same information.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Do the same with kernel.log.
    Step 3
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

  • MacBook Pro (retina late-2013) randomly shut down and now won't turn on again

    My first submission on here
    I recently bought a MBPR a few days ago and was working seamlessly. Today I had taken it off charge to watch a couple videos and talk to a few people online. While I was doing this, the MacBook Pro was rested on a couch so I'm certain ventellation was fine.
    Then at one point it shut down unexpectedly. I was able to turn if back on, thinking it might be battery but as it booted back up I saw that it was on 65%. I then continued to use it and by the time it reach ~60% it shut down again. This time I wasn't able to boot it up again at all. I pressed the pwer button, plugged it into power and pressed it again and even tried an SMC reset. The AC's indicator LED flashed from orange to green (as it is suppoed to with SMC resets) but it would still not turn on after I pressed the power button again.
    Please help, this computer is brand new and I am not sure what could have caused this.
    Thank you

    I have picked up my brand new MBPR on the 4th as well, and last night restarted for the first time after software update ( mavericks ) and after 3 hours hours of grey screen with spinning wheel called APPLE who again never knows what they are talking about because they keep saying " we never heard about that " when I called about the same issue on my 17 inch 2 months ago. So I called 3 times this morning and when I let them know that I am quite " puzzled " that every time I mention a Maverick Issue suddensly my call gets disconnected, and nobody calls me back when THEY SWEAR they took notes of my call bacl number. Last call a few minutes ago, I spoke to a supervisor and talked for 45 minutes about all issues and when he expressed concern about me recording the call I told him " You guys record my calls, so where does it say where I couldn't record yours if I wanted to ? " and the supervisor hung up on me... Way to Go APPLE!!! I've been an apple devotee since I first got my apple lisa in 1984 but they have only been going to " s*** " the last 2-3 years.
    So DIGGLY, do like I will this morning and return your purchase!

  • My macbook pro 13" unibody has randomly shut down, and will not switch on again, it is totally unresponsive. I have tried using different chargers, and my laptop had charge when  it shut down,

    My macbook pro 13" unibody has randomly shut down, and will not switch on again, it is totally unresponsive. I have tried using different chargers, and my laptop had charge when  it shut down,

    Hey Sarahbetts,
    Thanks for the question. If I understand correctly, the MacBook will not turn on. I would recommend that you read this article, it may be able to help the issue.
    Troubleshooting: My computer won't turn on - Apple Support
    Thanks for using Apple Support Communities.
    Have a good one,
    Mario

  • My macbook pro doesn't restart or shut down from the apple menu. I run 10.7.5, any suggestions?

    My macbook pro doesn't restart or shut down from the apple menu. I run 10.7.5, any suggestions?

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • My MacBook Pro Core Duo from 2006 shuts down randomly requiring frequent reboots to the point I had to abandon doing any project or anything on this MacBook Pro. Same thing occurs with the iMac dual core from 2007. MacBook battery replaced.

    My MacBook Pro Core Duo from 2006 shuts down randomly requiring frequent reboots to the point I had to abandon doing any project or anything on this MacBook Pro. Same thing occurs with the iMac dual core from 2007. MacBook battery replaced. Is it internal battery for both, new logic board required, bad hard drive, or bad RAM?
    Help.

    Run an Apple Hardware Test using the original installation disk that has the AHT instructions on it.
    Try SMC and PRAM resets:
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/ht1379
    It is possible that you may need a new PRAM battery.
    Ciao.

  • 17 MacBook Pro is not booting up. Won't get passed grey screen with Apple wheel spinning below.

    17 MacBook Pro is not booting up. Won't get passed grey screen with Apple wheel spinning below.

    You may be having a hardware problem that you cannot resolve on your own. Nevertheless...
    ...hold down the command and R keys whilst booting to try to get to your Recovery partition. If you can, use Disk Utility to try to Verify your boot drive (usually named "Macintosh HD" unless you've renamed it). If the verification fails, try to repair your hard drive. If everything appears to be OK, restart.
    If you can't get into your Recovery partition, your problem is likely hardware related. If so, keep your appointment and see what the Apple techs have to say.
    Clinton

  • Ipad won't shut down, blank screen

    Ipad(gen2) won't shut down,  Blank screen and shows working only

    While the iPad is on hold the Home button and Power button at the same time for 10 seconds or so until the iPad powers down and then powers back up.  Sometimes it won't power back up and you have to hold the Power button until it comes back on.
    This resets the iPad and is usually one of the first things to try when troubleshooting issues like this.

  • How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something"sign... it just doesn't start the system....

    How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
    Please help
    Marcelo

    If there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
    You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
    Gray, Blue or White screen at boot, w/spinner/progress bar
    Also take this time to backup your users files off the machine if possible.
    Most commonly used backup methods
    Sometime that won't work and you need to do more
    ..Step by Step to fix your Mac

  • My MacBook Pro Hard Drive recently gave me the gray folder with the question mark of death. Even as

    My MacBook Pro Hard Drive recently gave me the gray folder with the question mark of death. Even as a Mac Newbie/Novice, I successfully installed a new hard drive and the OS (10.6.8) software from my installation discs. I have, however, lost the ability to play video using the spacebar and I have no idea on the steps necessary to correct this seemingly simple technical blip. .Here's my system overview:Model Name:     MacBook Pro Model Identifier:     MacBookPro6,2 Processor Name: Intel Core i5 Processor Speed:     2.4 GHz Number Of Processors:     1 Total Number Of Cores:     2 L2 Cache (per core):     256 KB L3 Cache:     3 MB Memory:     4 GB Processor Interconnect Speed:     4.8 GT/s.
    I am using the Premiere Pro CS5 NLE (with the 5.0.4 updates), and I have tried to reinstall the software (which is actually the Production Premium package) several times, but I still cannot use the spacebar (or any method) to play any of my imported videos.
    PLEASE HELP in any way you can!
    Prior to having to replace my hard drive, my software was working just fine. No problems at all. But now, it seems that I can't get it to play whatever type of file I import.
    Again, I am a newbie to the Mac, so any and all correctional/repair assistance needs to be expalined as if I were a child :  ) 
    I would hate to try to revert to considering the sophmoric Final Cut Pro X editing software package, but I've got to do something to be able to get back to my editing activities.
    zionhall
    [email protected]

    Jorge242 wrote:
    @FatMac the internet recovery doesnt work. It goes into recovery mode and then when i try to reinstall it cant find a disk to install it to. So what would be a good choice to take now?
    Recovery Mode presents you with, among other things, Disk Utility. When you open that, if the internal shows up at all, first try to "Repair DIsk." If that doesn't work but if the "Media" line is present, try to format and partition it with a GUID partition table (understand that you will be erasing the contents of your internal). Then try to reinstall the OS. If that doesn't work, and since your Retina MBP didn't come with a DVD drive or DVDs, you'll need to try a hardware test using these instructions from Apple (short version: shut down, press the power button and hold down the "D" key). If none of those things work, let's hope you either have AppleCare or your warranty has some life left because the SSD in your rMBP is proprietary and expensive. You'll need to bring it to an Apple Genius for evaluation.

Maybe you are looking for