Macbook pro 13 20 min boots and hangs
I got this in dec of 09 and its been great until now. Its taking like 20 mins to boot up and everything is so slow once it does. Ive tried disc utility, no errors. I put it into vebrose mode snd its saying somthing about convert launchd dashboardadvisory.plist. im reinstalling mac os on it and it said it would take 45 mins, its been 3 hours and its on 15 mins remaining. its going a min ever 20 mins or so.
any ideas? before i make a 3 hour trip to the apple store AGAIN!
Its sad i have to use a windows puter to ask about my apple =(
Welcome to Apple Discussions.
I would recommend restarting the computer from the Install disc that came with the computer and running Disk Utility. You do this by restarting with the disc in the Superdrive and holding down the Option key. It should look for the disc in the Superdrive and boot. Let it go through the install process until it gets to the point it asks which language you want, at that point stop and using the Utilities menu choose Disk Utility. Run Repair Disk Permissions and then run Repair Disk. If Repair Disk reports errors run it several times until it doesn't. If the disk is damaged it will let you know.
One last thing, is how full is your internal HD, it should have a minimum of 10-15% available disk space in order for your machine to run well. If you have filled it up you will need to remove data files onto an external HD.
Good luck,
Roger
Similar Messages
-
MacBook Pro -- external hard drive corruption -- AND hanging computer?
Since purchasing a 17" MacBook Pro, I've had serious problems with directory corruption on three of my external firewire hard drives (80 and 100 G FireLite Pocket drives and a 400 G Lacie drive). About 2 weeks ago, the 80 G drive (with most of my critical files) disappeared from the desktop. Disk Utilities returned with a message that it was repairable. Tech Tools supposedly fixed it, but the drive icon shortly disappeared from the desktop. This time, Disk Utilities "repaired" it, but it was the kiss of death. After this, plugging in the drive caused the computer to hang indefinitely. I could no longer run any repair or data rescue software. Once this problem occurs, I can switch firewire cables and computers, and the computers still crash/hang. A techy at work managed to rescue the files and replace them on the disk (this required other hardware, a PC, and some software he downloaded(?)). Two weeks later, the problem happened again. However, this time, it was the 80 G and my 400 G backup drive. Now, all of my originals and backups (for the past 2 years, since I did my last CD/DVD backups) are (hopefully) temporarily unavailable. My 100 G drive started to do the same thing. However, I purchased and downloaded a copy of Disk Warrior, which seems to have rescued this disk.
I've had these drive for between 3 and 5 years, with little or absolutely no trouble. Then, after getting the MacBook Pro, I'm encountering really serious problems.
Is the MacBook Pro at fault? (I've returned to my PowerBook G4 until this issue is resolve).
What causes such severe disk directory damage that causes my computer to hang?
How can I recover my files (critically important to my work, some of which is on a tight deadline) without having to run to the vastly overworked/underpaid techy in my place of employment)?
My conversation with an Apple Tech was much less than satisfying. In fact, he seemed to portray a state of denial about the MacBook Pro having any problems, even though the web is full of complaints. What's up Apple? Are you beginning to backslide yet again?Welcome To Discussions JeffBloom!
I'm sorry to hear that you are having problems with your MBP, but you have posted your inquiry, in the Discussions Forum, that is intended for discourse about the use of Apple Discussions.
You will get more focused attention to your issue, if you select a more appropriate location from this page Discussions Forum Home.
For example,
From the Forum Home Page, select the Category MacBook Pro.
Then choose an appropriate MBP Forum, such as Using your MacBook Pro.
On Forum pages, there is an option to Post New Topic.
Good Luck!
ali b -
Why is my Macbook Pro very slow to boot and also everything else?
Hi,
When I start my computer, it remains at the silver screen with Apple logo forever. The startup boot is supremely slow.
Even while i am opening applications, the icons keep on jumping at the dock for a long time before the application starts.
The problem started about two months ago however it has worsened a lot recently. This is my etrecheck profile. Hope it helps. Any help will be appreciated.
My MacbookPro is very slow. Here's the Etrecheck report.
Let me know what i should do.
EtreCheck version: 1.9.15 (52)
Report generated September 5, 2014 5:53:36 PM EDT
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
Mac OS X 10.7.5 (11G63) - Uptime: 0 days 0:15:32
Disk Information: ?
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (200.46 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple, Inc. MacBook Pro
Kernel Extensions: ?
[not loaded] com.devguru.driver.SamsungACMControl (1.4.17 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.17 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungComposite (1.4.17 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.17 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.17 - SDK 10.6) Support
Startup Items: ?
ciscod: Path: /System/Library/StartupItems/ciscod
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[running] com.cisco.anyconnect.vpnagentd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.cisco.anyconnect.gui.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
User Launch Agents: ?
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[loaded] com.divx.agent.postinstall.plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
User Login Items: ?
iTunesHelper
Octoshape
Dropbox
AdobeResourceSynchronizer
fuspredownloader
KiesAgent
Internet Plug-ins: ?
o1dbrowserplugin: Version: 5.4.2.18903 Support
OVSHelper: Version: 1.1 Support
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.2 Support
Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0 - SDK 10.8
googletalkbrowserplugin: Version: 5.4.2.18903 Support
QuickTime Plugin: Version: 7.7.1
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 25 Check version
Safari Extensions: ?
DivXHTML5
Audio Plug-ins: ?
iSightAudio: Version: 7.7.1 - SDK 10.7
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.3 - SDK 10.7
User Internet Plug-ins ?
OctoshapeWeb: Version: 1.0 - SDK 10.8 Support
Google Earth Web Plug-in: Version: 7.1 Support
3rd Party Preference Panes: ?
DivX Support
Flash Player Support
Flip4Mac WMV Support
Java Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
6% firefox
3% airportd
3% socketfilterfw
3% WindowServer
0% fontd
Top Processes by Memory: ?
496 MB firefox
111 MB Dropbox
94 MB mds
82 MB Finder
53 MB WindowServer
Virtual Memory Information: ?
1.36 GB Free RAM
1.19 GB Active RAM
508 MB Inactive RAM
975 MB Wired RAM
268 MB Page-ins
0 B Page-outsPlease uninstall "Cisco AnyConnect" and see whether there's an improvement. If there is, check to see whether there's an update, or preferably, use the built-in Cisco client instead.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software. -
My macbook pro w/lion running slow and hanging a lot: sometimes freezing
my mid-2010 w/lion is running quite slow and hanging: sometimes freezing. have reset smc and emptied caches. helped for a bit but now even slower. happens with minimal load on cpu and have plenty of memory available.. any suggestions? tq
Increase Disk Space.
http://support.apple.com/kb/PH3915
Repair Disk.
https://discussions.apple.com/thread/3548399?start=0&tstart=0
Hope this helps. -
I have created three new users without Apple IDs and they can't log into either of my Macbook Pro or Mac Mini running Mountain Lion. These accounts are for my kids and originally were setup with parental controls and time constraints. Thinking this was the problem I removed the time constraints, removed the parental controls, deleted and re-added them, and made them standard users. I have reinstalled, used disk utility to repair permissions, and made them admins. Any help is appreciated.
Users don't need Apple ID's. That's not the issue. Have you tried repairing permissions their accounts?
http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/
Repairing User Permissions in OS X Lion
You’ll need to reboot to perform this, and then use the same resetpassword utility that is used to change passwords in Lion, but instead choosing a hidden option.
When you use the Disk Utility app and Repair Permissions — it doesn’t actually repair the permission settings on folders and files in your Home folder where your documents and personal applications reside.
In Lion, there is an additional Repair Permissions application utility hidden away. This tool is located inside boot Repair Utilities. Here’s how to access it.
Restart Lion and hold down the Command and R keys. You will boot into the Repair Utilities screen. On top, in the Menu Bar click the Utilities item then select Terminal.
In the Terminal window, type resetpassword and hit Return.
The Password reset utility launches, but you’re not going to reset the password. Instead, click on the icon for your Mac’s hard drive at the top. From the drop-down below it, select the user account where you are having issues.
At the bottom of the window, you’ll see an area labeled ‘Reset Home Directory Permissions and ACLs’. Click the Reset button there.
The reset process takes a couple of minutes. When it’s done, quit the programs you’ve opened and restart your Mac. Notice that ‘Spotlight’ starts re-indexing immediately. -
Last night while I was using my MacBook pro, it suddenly restart itself and it hang at the white screen. I tried to restart 5-6 times but it appeared to be the same result! Help me!!!,!,
Boot in safe mode
-
I have a MacBook Pro that will not boot up. The apple symbol is there and the spinning wheel keeps spinning. Any idea how I can fix this?
Reinstall OS X.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
OR
Reinstall Snow Leopard without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/. -
My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?
Shootist007 wrote:
If the system won't boot from the new drive the OP bought and install OS X on it it certainly won't boot from the original drives Recovery HD partition.
Sorry genius.....but if the Recovery disk shows up that means the disk cable isn't bad. Could be he did have a screwed up HDD and when he put the NEW HDD in (after putting the OS on it via USB) the computer didn't reconize it and therefore didn't boot the OS. Just maybe right genius? Don't rush to criticize someone's recommendations until you realize other possibilities. (I did say "if it does")
Thank you -
MacBook Pro freezes during start up and safe boot
MacBook Pro freezes during start up and will not start in safe boot in recovery, it goes back to apple screen with spinning gear
Stinkster,
does your MacBook Pro have a removable battery? If so, then it originally came with grey installation DVDs. If it doesn’t have a removable battery, look on the bottom of your MacBook Pro for its serial number (it’s etched there in tiny print). If its serial number has eleven characters, write down the last three of them; if it has twelve, write down the last four. Include the three or four characters in your reply; they can determine which model MacBook Pro you have, and the model will determine whether it originally came with grey installation DVDs or not.
If your MacBook Pro did originally come with grey installation DVDs, then you’re going to need to find them (or buy a replacement pair from Apple or iFixit) to reïnstall Mac OS X on your current hard drive, or to install it on a replacement hard drive. -
Whenever I connect the minidisplay port to the HDMI cable, my MacBook Pro screen turns blue for a moment and then nothing shows on my HDTV. I have tried to "detect displays" with each resolution listed, but none seem to work with my tv. Is there any way to fix this issue?
I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port. -
How can i migrate my software from a macbook pro to a mini server
So i have bought a new Mac Mini Server but now i want to migrate my MacBook Pro User Profile, Data Files and Software to it. yet it would appear that there is no migration agent to use which implies that Apple miss an important part of the Mac experience.
So if any body out there has a solution i would welcome your input. i had thought about using the push option from the MacBook Pro migration Agent but not sure if that would work.
CharlesWell OK you can not use the migration assistant because there isn't one for SL Server and it looks that if you want to migrate from a MBP to server as a user you have 2 choices manually move the item you want to an identical user on the server or create the user and bild the software and move the data required.
how ever i have had a result in using the 2nd drive for just SL, when I spoke to the tech at the apple store yesterday he said use a retail copy of OSX SL which wont boot but apply update 10.6.8 combo and the system will then boot and bingo you will have a dual boot machine. "Ho No you Won't" firstly once you run the install from the CD which has to be triggered from Server the machine will reboot after copying the packages to the new drive but does not run them to build the SL system so you have nothing to install the update onto hence doesn't work.
Here's the suprise I had a copy of my MBP on a spare hdd produced by Carbon Copy, so I attached this the a FireWire case to the mini held the alt key down and powered up. much to my suprise the mini booted into the external drive hold my MBP copy of SL. from then on in it was just a case of copying the drive using carbon copy to the 2nd drive on the mini and hey presto reboot and i now have both server and and non server mini in one box.
Sometimes you just get Lucky. -
I have a macbook pro core i7 mid 2012
And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank youIf you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
My MacBook Pro is very slow booting up (1 minute plus) since I installed Mavericks. What can I do to speed up?
Hi John,
I posted the question. Here is my system log result:
Mar 3 11:29:52 localhost bootlog[0]: BOOT_TIME 1393864192 0
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.bookstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Mar 3 11:30:05 --- last message repeated 6 times ---
Mar 3 11:30:05 localhost kernel[0]: Longterm timer threshold: 1000 ms
Mar 3 11:30:05 localhost kernel[0]: PMAP: PCID enabled
Mar 3 11:30:05 localhost kernel[0]: Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Mar 3 11:30:05 localhost kernel[0]: vm_page_bootstrap: 1983425 free pages and 97343 wired pages
Mar 3 11:30:05 localhost kernel[0]: kext submap [0xffffff7f807a6000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a6000]
Mar 3 11:30:05 localhost kernel[0]: zone leak detection enabled
Mar 3 11:30:05 localhost kernel[0]: "vm_compressor_mode" is 4
Mar 3 11:30:05 localhost kernel[0]: standard timeslicing quantum is 10000 us
Mar 3 11:30:05 localhost kernel[0]: standard background quantum is 2500 us
Mar 3 11:30:05 localhost kernel[0]: mig_table_max_displ = 74
Mar 3 11:30:05 localhost kernel[0]: TSC Deadline Timer supported and enabled
Mar 3 11:30:05 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
Mar 3 11:30:05 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
Mar 3 11:30:05 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
Mar 3 11:30:05 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
Mar 3 11:30:05 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
Mar 3 11:30:05 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
Mar 3 11:30:05 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
Mar 3 11:30:05 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
Mar 3 11:30:05 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Mar 3 11:30:05 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Mar 3 11:30:05 localhost kernel[0]: calling mpo_policy_init for Sandbox
Mar 3 11:30:05 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
Mar 3 11:30:05 localhost kernel[0]: calling mpo_policy_init for Quarantine
Mar 3 11:30:05 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
Mar 3 11:30:05 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Mar 3 11:30:05 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Mar 3 11:30:05 localhost kernel[0]: MAC Framework successfully initialized
Mar 3 11:30:05 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
Mar 3 11:30:05 localhost kernel[0]: AppleKeyStore starting (BUILT: Sep 19 2013 22:20:34)
Mar 3 11:30:05 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Mar 3 11:30:05 localhost kernel[0]: ACPI: sleep states S3 S4 S5
Mar 3 11:30:05 localhost kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
Mar 3 11:30:05 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 6689
Mar 3 11:30:05 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
Mar 3 11:29:54 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Mar 3 11:30:05 localhost kernel[0]: [ PCI configuration begin ]
Mar 3 11:30:05 localhost kernel[0]: console relocated to 0xf90010000
Mar 3 11:30:05 localhost kernel[0]: [ PCI configuration end, bridges 12, devices 18 ]
Mar 3 11:30:05 localhost kernel[0]: mcache: 8 CPU(s), 64 bytes CPU cache line size
Mar 3 11:29:54 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
Mar 3 11:30:05 localhost kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
Mar 3 11:30:05 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
Mar 3 11:30:05 localhost kernel[0]: rooting via boot-uuid from /chosen: 278FA782-15F5-3827-9A81-43DEB73FA45E
Mar 3 11:30:05 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Mar 3 11:30:05 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
Mar 3 11:30:05 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
Mar 3 11:30:05 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
Mar 3 11:30:05 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
Mar 3 11:30:05 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
Mar 3 11:30:05 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HTS545050B9A302 Media/IOGUIDPartitionScheme/Customer@2
Mar 3 11:30:05 localhost kernel[0]: BSD root: disk0s2, major 1, minor 2
Mar 3 11:30:05 localhost kernel[0]: BTCOEXIST off
Mar 3 11:30:05 localhost kernel[0]: BRCM tunables:
Mar 3 11:30:05 localhost kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]
Mar 3 11:30:05 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 70cd60fffed498ea; max speed s800.
Mar 3 11:30:05 localhost kernel[0]: hfs: mounted Macintosh HD on device root_device
Mar 3 11:30:05 localhost kernel[0]: Thunderbolt Self-Reset Count = 0xedefbe00
Mar 3 11:30:05 localhost kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
Mar 3 11:30:13 localhost kernel[0]: VM Swap Subsystem is ON
Mar 3 11:30:14 localhost hidd[50]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
Mar 3 11:30:14 localhost hidd[50]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Mar 3 11:30:14 localhost com.apple.SecurityServer[15]: Session 100000 created
Mar 3 11:30:14 localhost distnoted[68]: # distnote server daemon absolute time: 22.597465450 civil time: Mon Mar 3 11:30:14 2014 pid: 68 uid: 0 root: yes
Mar 3 11:30:14 localhost distnoted[68]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
Mar 3 11:30:15 localhost kdc[48]: krb5_kdc_set_dbinfo: failed to create root node: /Local/Default
Mar 3 11:30:15 localhost com.apple.launchd[1] (com.apple.Kerberos.kdc[48]): Exited with code: 1
Mar 3 11:30:15 localhost com.apple.launchd[1] (com.apple.Kerberos.kdc): Throttling respawn: Will start in 6 seconds
Mar 3 11:30:15 localhost kernel[0]: AGC: 3.4.35, HW version=1.9.23, flags:0, features:20600
Mar 3 11:30:15 localhost kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
Mar 3 11:30:15 localhost kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
Mar 3 11:30:15 localhost kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
Mar 3 11:30:15 localhost kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
Mar 3 11:30:15 localhost kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
Mar 3 11:30:15 localhost kernel[0]: Previous Shutdown Cause: 5
Mar 3 11:30:15 localhost kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
Mar 3 11:30:15 localhost kernel[0]: IOBluetoothUSBDFU::probe
Mar 3 11:30:15 localhost kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0042
Mar 3 11:30:15 localhost kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xd000 ****
Mar 3 11:30:15 localhost kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xd000 ****
Mar 3 11:30:16 localhost com.apple.SecurityServer[15]: Entering service
Mar 3 11:30:16 localhost aosnotifyd[66]: aosnotifyd has been launched
Mar 3 11:30:16 localhost aosnotifyd[66]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
Mar 3 11:30:16 localhost awacsd[63]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
Mar 3 11:30:16 localhost awacsd[63]: InnerStore CopyAllZones: no info in Dynamic Store
Mar 3 11:30:16 localhost UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
Mar 3 11:30:16 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
Mar 3 11:30:16 localhost kernel[0]: IO80211Interface::efiNVRAMPublished():
Mar 3 11:30:16 localhost mDNSResponder[41]: mDNSResponder mDNSResponder-522.90.2 (Nov 3 2013 18:51:09) starting OSXVers 13
Mar 3 11:30:16 localhost com.apple.usbmuxd[23]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
Mar 3 11:30:16 localhost systemkeychain[85]: done file: /var/run/systemkeychaincheck.done
Mar 3 11:30:16 localhost mDNSResponder[41]: D2D_IPC: Loaded
Mar 3 11:30:16 localhost mDNSResponder[41]: D2DInitialize succeeded
Mar 3 11:30:16 localhost mDNSResponder[41]: 4: Listening for incoming Unix Domain Socket client requests
Mar 3 11:30:16 localhost networkd[100]: networkd.100 built Aug 24 2013 22:08:46
Mar 3 11:30:16 localhost kernel[0]: Waiting for DSMOS...
Mar 3 11:30:16 localhost UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
Mar 3 11:30:16 localhost digest-service[102]: label: default
Mar 3 11:30:16 localhost digest-service[102]: dbname: od:/Local/Default
Mar 3 11:30:16 localhost digest-service[102]: mkey_file: /var/db/krb5kdc/m-key
Mar 3 11:30:16 localhost digest-service[102]: acl_file: /var/db/krb5kdc/kadmind.acl
Mar 3 11:30:17 localhost kernel[0]: createVirtIf(): ifRole = 1
Mar 3 11:30:17 localhost kernel[0]: in func createVirtualInterface ifRole = 1
Mar 3 11:30:17 localhost airportd[67]: airportdProcessDLILEvent: en1 attached (down)
Mar 3 11:30:17 localhost kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1
Mar 3 11:30:17 localhost kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
Mar 3 11:30:17 localhost kernel[0]: Created virtif 0xffffff80194fd800 p2p0
Mar 3 11:30:17 localhost digest-service[102]: digest-request: uid=0
Mar 3 11:30:17 localhost mdmclient[42]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
Mar 3 11:30:18 localhost digest-service[102]: digest-request: netr probe 0
Mar 3 11:30:18 localhost digest-service[102]: digest-request: init request
Mar 3 11:30:18 localhost digest-service[102]: digest-request: init return domain: BUILTIN server: LOCALHOST indomain was: <NULL>
Mar 3 11:30:18 localhost kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
Mar 3 11:30:18 localhost kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
Mar 3 11:30:18 localhost airportd[67]: _handleLinkEvent: WiFi is not powered. Resetting state variables.
Mar 3 11:30:18 localhost locationd[46]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this compatiblity mapping behavior in the near future.
Mar 3 11:30:18 localhost locationd[46]: NBB-Could not get UDID for stable refill timing, falling back on random
Mar 3 11:30:18 localhost apsd[65]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
Mar 3 11:30:18 localhost locationd[46]: Location icon should now be in state 'Inactive'
Mar 3 11:30:19 localhost configd[17]: dhcp_arp_router: en1 SSID unavailable
Mar 3 11:30:19 localhost com.apple.launchd[1] (com.apple.Kerberos.kdc): Throttling respawn: Will start in 2 seconds
Mar 3 11:30:19 localhost configd[17]: network changed: DNS*
Mar 3 11:30:19 imac-3.local configd[17]: setting hostname to "walters-imac-3.local"
Mar 3 11:30:20 imac-3 kernel[0]: en1: 802.11d country code set to 'US'.
Mar 3 11:30:20 imac-3 kernel[0]: 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
Mar 3 11:30:20 imac-3.local mDNSResponder[41]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F9624801F60 imac-3.local. (Addr) that's already in the list
Mar 3 11:30:20-imac-3.local mDNSResponder[41]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F96248023F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
Mar 3 11:30:20-imac-3.local mDNSResponder[41]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F9625005960-imac-3.local. (AAAA) that's already in the list
Mar 3 11:30:20-imac-3.local mDNSResponder[41]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F9625005DF0 E.0.C.D.9.0.E.F.F.F.7.4.8.F.2.E.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
Mar 3 11:30:20-imac-3 com.apple.launchd[1] (com.apple.Kerberos.kdc): Throttling respawn: Will start in 1 seconds
Mar 3 11:30:21 --- last message repeated 1 time ---
Mar 3 11:30:21-imac-3.local kdc[117]: label: default
Mar 3 11:30:21-imac-3.local kdc[117]: dbname: od:/Local/Default
Mar 3 11:30:21-imac-3.local kdc[117]: mkey_file: /var/db/krb5kdc/m-key
Mar 3 11:30:21-imac-3.local kdc[117]: acl_file: /var/db/krb5kdc/kadmind.acl
Mar 3 11:30:21-imac-3.local kdc[117]: KDC started
Mar 3 11:30:21-imac-3 kernel[0]: init
Mar 3 11:30:21-imac-3 kernel[0]: probe
Mar 3 11:30:21-imac-3 kernel[0]: start
Mar 3 11:30:21-imac-3 kernel[0]: DSMOS has arrived
Mar 3 11:30:21-imac-3 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xd000
Mar 3 11:30:21-imac-3 kernel[0]: [IOBluetoothHCIController][start] -- completed
Mar 3 11:30:21-imac-3.local loginwindow[44]: Login Window Application Started
Mar 3 11:30:21-imac-3 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Mar 3 11:30:21-imac-3 kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x2740 -- 0x7800 -- 0xd000 ****
Mar 3 11:30:21-imac-3.local WindowServer[119]: Server is starting up
Mar 3 11:30:21-imac-3.local blued[61]: hostControllerOnline - Number of Paired devices = 0, List of Paired devices = (null)
Mar 3 11:30:21-imac-3.local mds[40]: (Normal) FMW: FMW 0 0
Mar 3 11:30:21-imac-3.local mds[40]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
Mar 3 11:30:21 --- last message repeated 2 times ---
Mar 3 11:30:21-imac-3 kernel[0]: [AGPM Controller] build GPUDict by Vendor1002Device6760
Mar 3 11:30:21-imac-3 kernel[0]: en3: promiscuous mode enable succeeded
Mar 3 11:30:21-imac-3.local WindowServer[119]: Session 256 retained (2 references)
Mar 3 11:30:21-imac-3.local WindowServer[119]: Session 256 released (1 references)
Mar 3 11:30:21-imac-3.local WindowServer[119]: Session 256 retained (2 references)
Mar 3 11:30:22-imac-3.local WindowServer[119]: init_page_flip: page flip mode is on
Mar 3 11:30:22-imac-3 kernel[0]: MacAuthEvent en1 Auth result for: 68:7f:74:95:b3:73 MAC AUTH succeeded
Mar 3 11:30:22-imac-3 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
Mar 3 11:30:22-imac-3 kernel[0]: AirPort: Link Up on en1
Mar 3 11:30:22-imac-3 kernel[0]: en1: BSSID changed to 68:7f:74:95:b3:73
Mar 3 11:30:22-imac-3 kernel[0]: AirPort: RSN handshake complete on en1
Mar 3 11:30:22 -imac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
Mar 3 11:30:24-imac-3.local WindowServer[119]: Found 39 modes for display 0x00000000 [30, 9]
Mar 3 11:30:24-imac-3.local WindowServer[119]: Found 1 modes for display 0x00000000 [1, 0]
Mar 3 11:30:24 --- last message repeated 2 times ---
Mar 3 11:30:24-imac-3.local WindowServer[119]: mux_initialize: Mode is dynamic
Mar 3 11:30:24-imac-3.local WindowServer[119]: Found 39 modes for display 0x00000000 [30, 9]
Mar 3 11:30:24-imac-3.local WindowServer[119]: Found 1 modes for display 0x00000000 [1, 0]
Mar 3 11:30:24 --- last message repeated 1 time ---
Mar 3 11:30:24-imac-3.local WindowServer[119]: WSMachineUsesNewStyleMirroring: false
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x042728c2: GL mask 0x5; bounds (0, 0)[1440 x 900], 39 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca3, S/N 0, Unit 2, Rotation 0
UUID 0xe2d0b55c862d4b0eba07e1bd2579493f
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[3840 x 2160], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x003f0040: GL mask 0x10; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
Mar 3 11:30:24-imac-3.local WindowServer[119]: WSSetWindowTransform: Singular matrix
Mar 3 11:30:24 --- last message repeated 1 time ---
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x042728c2: GL mask 0x5; bounds (0, 0)[1440 x 900], 39 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca3, S/N 0, Unit 2, Rotation 0
UUID 0xe2d0b55c862d4b0eba07e1bd2579493f
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x003f003d: GL mask 0x2; bounds (2464, 0)[1 x 1], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x003f0040: GL mask 0x10; bounds (2465, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
Mar 3 11:30:24 walters-imac-3.local WindowServer[119]: Display 0x003f003f: GL mask 0x8; bounds (2466, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
Mar 3 11:30:24-imac-3.local WindowServer[119]: CGXPerformInitialDisplayConfiguration
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x042728c2: Unit 2; Alias(2, 0x5); Vendor 0x610 Model 0x9ca3 S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (0,0)[1440 x 900], Rotation 0, Resolution 1
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2464,0)[1 x 1], Rotation 0, Resolution 1
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x003f0040: Unit 4; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2465,0)[1 x 1], Rotation 0, Resolution 1
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x003f003f: Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2466,0)[1 x 1], Rotation 0, Resolution 1
Mar 3 11:30:24-imac-3.local WindowServer[119]: CGXMuxBoot: Boot normal
Mar 3 11:30:24-imac-3.local WindowServer[119]: GLCompositor: GL renderer id 0x01024301, GL mask 0x00000003, accelerator 0x00004d2b, unit 0, caps QEX|MIPMAP, vram 451 MB
Mar 3 11:30:24-imac-3.local WindowServer[119]: GLCompositor: GL renderer id 0x01024301, GL mask 0x00000003, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
Mar 3 11:30:24-imac-3.local WindowServer[119]: GLCompositor: GL renderer id 0x01021b07, GL mask 0x0000001c, accelerator 0x000048c3, unit 2, caps QEX|MIPMAP, vram 256 MB
Mar 3 11:30:24-imac-3.local WindowServer[119]: GLCompositor: GL renderer id 0x01021b07, GL mask 0x0000001c, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
Mar 3 11:30:24-imac-3.local WindowServer[119]: GLCompositor enabled for tile size [256 x 256]
Mar 3 11:30:24-imac-3.local WindowServer[119]: CGXGLInitMipMap: mip map mode is on
Mar 3 11:30:25-imac-3.local loginwindow[44]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
Mar 3 11:30:25-imac-3 kernel[0]: nspace-handler-set-snapshot-time: 1393864227
Mar 3 11:30:25-imac-3.local com.apple.mtmd[39]: Set snapshot time: 2014-03-03 11:30:27 -0500 (current time: 2014-03-03 11:30:25 -0500)
Mar 3 11:30:25-imac-3.local WindowServer[119]: Display 0x042728c2: Unit 2; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
Mar 3 11:30:25-imac-3.local launchctl[138]: com.apple.findmymacmessenger: Already loaded
Mar 3 11:30:25-imac-3.local com.apple.SecurityServer[15]: Session 100005 created
Mar 3 11:30:25-imac-3.local UserEventAgent[140]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
Mar 3 11:30:25-imac-3.local loginwindow[44]: Setting the initial value of the magsave brightness level 1
Mar 3 11:30:25-imac-3.local loginwindow[44]: Login Window Started Security Agent
Mar 3 11:30:26-imac-3.local UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'MyWireless' making interface primary (protected network)
Mar 3 11:30:26-imac-3.local configd[17]: network changed: DNS* Proxy
Mar 3 11:30:26-imac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
Mar 3 11:30:26-imac-3.local UserEventAgent[11]: Captive: en1: Probing 'MyWireless'
Mar 3 11:30:26-imac-3.local WindowServer[119]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Mar 3 11:30:26-imac-3.local WindowServer[119]: Received display connect changed for display 0x42728c2
Mar 3 11:30:26-imac-3.local WindowServer[119]: Found 15 modes for display 0x042728c2 [10, 5]
Mar 3 11:30:26-imac-3.local WindowServer[119]: CGXMuxAcknowledge: Posting glitchless acknowledge
Mar 3 11:30:26-imac-3.local WindowServer[119]: Received display connect changed for display 0x42728c2
Mar 3 11:30:26-imac-3.local WindowServer[119]: Found 1 modes for display 0x042728c2 [1, 0]
Mar 3 11:30:26-imac-3.local WindowServer[119]: Received display connect changed for display 0x3f003f
Mar 3 11:30:26-imac-3.local WindowServer[119]: Found 1 modes for display 0x003f003f [1, 0]
Mar 3 11:30:26-imac-3.local WindowServer[119]: Received display connect changed for display 0x3f0040
Mar 3 11:30:26-imac-3.local WindowServer[119]: Found 1 modes for display 0x003f0040 [1, 0]
Mar 3 11:30:27-imac-3.local configd[17]: network changed: v4(en1!:192.168.1.100) DNS+ Proxy+ SMB
Mar 3 11:30:27-imac-3.local WindowServer[119]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7fd409d063f0) - enabling OpenGL
Mar 3 11:30:28-imac-3.local mtmfs[38]: mount succeeded for /Volumes/MobileBackups
Mar 3 11:30:28-imac-3.local mds[40]: (Normal) Volume: volume:0x7fae1a823000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/MobileBackups
Mar 3 11:30:28-imac-3.local mds[40]: (Normal) Volume: volume:0x7fae1a823000 ********** Created snapshot backup index
Mar 3 11:30:28-imac-3.local WindowServer[119]: Display 0x042728c2: Unit 2; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
Mar 3 11:30:28-imac-3.local airportd[67]: _doAutoJoin: Already associated to “MyWireless”. Bailing on auto-join.
Mar 3 11:30:28-imac-3.local SecurityAgent[146]: This is the first run
Mar 3 11:30:28-imac-3.local SecurityAgent[146]: MacBuddy was run = 0
Mar 3 11:30:29-imac-3.local WindowServer[119]: Display 0x042728c2: Unit 2; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
Mar 3 11:30:29-imac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
Mar 3 11:30:32-imac-3.local ntpd[110]: proto: precision = 1.000 usec
Mar 3 11:30:34-imac-3.local awacsd[63]: Exiting
Mar 3 11:30:55-imac-3 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key B0PS (kSMCKeyNotFound)
Mar 3 11:30:55-imac-3 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key B0OS (kSMCKeyNotFound)
Mar 3 11:31:11-imac-3 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xd000 ****
Mar 3 11:31:57-imac-3.local distnoted[170]: # distnote server agent absolute time: 122.781746823 civil time: Mon Mar 3 11:31:57 2014 pid: 170 uid: 89 root: no
Mar 3 11:34:19-imac-3.local mds[40]: (Normal) Volume: volume:0x7fae20860000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.Or8ufk
Mar 3 11:40:25-imac-3.local WindowServer[119]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x0(0)
Mar 3 11:40:25-imac-3.local WindowServer[119]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x0(0)
Mar 3 11:41:39-imac-3 kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
Mar 3 11:41:40-imac-3 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xd000 ****
Mar 3 11:41:40-imac-3.local ntpd[110]: ntpd: wake time set -0.413667 s
Mar 3 11:41:41-imac-3 kernel[0]: hibernate image path: /var/vm/sleepimage
Mar 3 11:41:41-imac-3 kernel[0]: efi pagecount 43
Mar 3 11:41:41-imac-3 kernel[0]: hibernate_page_list_setall(preflight 1) start 0xffffff80d811f000, 0xffffff80d815f000
Mar 3 11:41:42-imac-3 kernel[0]: hibernate_page_list_setall time: 187 ms
Mar 3 11:41:42-imac-3 kernel[0]: pages 541993, wire 209488, act 62351, inact 295, cleaned 0 spec 19, zf 1951, throt 0, compr 0, xpmapped 0
Mar 3 11:41:42-imac-3 kernel[0]: could discard act 7524 inact 6013 purgeable 14318 spec 240034 cleaned 0
Mar 3 11:41:42-imac-3 kernel[0]: hibernate_page_list_setall preflight pageCount 274104 est comp 50 setfile 594876320 min 4294967296
Mar 3 11:41:42-imac-3 kernel[0]: AppleThunderboltHAL::earlyWake - complete - took 0 milliseconds
Mar 3 11:41:42-imac-3 kernel[0]: [0x2acc82c000, 0x32000000]
Mar 3 11:41:42-imac-3 kernel[0]: [0x2b6490e000, 0x19000000]
Mar 3 11:41:42-imac-3 kernel[0]: [0x2bc48e8000, 0x32000000]
Mar 3 11:41:42-imac-3 kernel[0]: [0x2c6481f000, 0x40000000]
Mar 3 11:41:42-imac-3 kernel[0]: [0x2ca481f000, 0xb000000]
Mar 3 11:41:42-imac-3 kernel[0]: [0x2d3481d000, 0x19000000]
Mar 3 11:41:42-imac-3 kernel[0]: [0x2d84934000, 0x1f000000]
Mar 3 11:41:42-imac-3 kernel[0]: [0x0, 0x0]
Mar 3 11:41:42-imac-3 kernel[0]: kern_open_file_for_direct_io(0) took 21 ms
Mar 3 11:41:42-imac-3 kernel[0]: Opened file /var/vm/sleepimage, size 4294967296, partition base 0x0, maxio 2000000 ssd 0
Mar 3 11:41:42-imac-3 kernel[0]: hibernate image major 1, minor 0, blocksize 4096, pollers 5
Mar 3 11:41:42-imac-3 kernel[0]: hibernate_alloc_pages act 84193, inact 8261, anon 2381, throt 0, spec 240053, wire 229621, wireinit 97343
Mar 3 11:41:42-imac-3 kernel[0]: hibernate_setup(0) took 13 ms
Mar 3 11:41:42-imac-3 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xd000 ****
Mar 3 11:41:42-imac-3 kernel[0]: Thunderbolt Self-Reset Count = 0xedefbe00
Mar 3 11:41:47-imac-3 kernel[0]: hibernate_page_list_setall(preflight 0) start 0xffffff80d811f000, 0xffffff80d815f000
Mar 3 11:41:47-imac-3 kernel[0]: hibernate_page_list_setall time: 379 ms
Mar 3 11:41:47-imac-3 kernel[0]: pages 540297, wire 207784, act 62356, inact 297, cleaned 0 spec 19, zf 1951, throt 0, compr 0, xpmapped 14199
Mar 3 11:41:47-imac-3 kernel[0]: could discard act 7524 inact 6013 purgeable 14318 spec 240035 cleaned 0
Mar 3 11:41:47-imac-3 kernel[0]: hibernate_page_list_setall found pageCount 272407
Mar 3 11:41:47-imac-3 kernel[0]: IOHibernatePollerOpen, ml_get_interrupts_enabled 0
Mar 3 11:41:47-imac-3 kernel[0]: IOHibernatePollerOpen(0)
Mar 3 11:41:47-imac-3 kernel[0]: encryptStart 14060
Mar 3 11:41:47-imac-3 kernel[0]: bitmap_size 0x3f5a0, previewSize 0x4f6798, writing 270854 pages @ 0x549d98
Mar 3 11:41:47-imac-3 kernel[0]: encryptEnd 538ae00
Mar 3 11:41:47-imac-3 kernel[0]: image1Size 0x9264000, encryptStart1 0x14060, End1 0x538ae00
Mar 3 11:41:47-imac-3 kernel[0]: encryptStart 9264000
Mar 3 11:41:47-imac-3 kernel[0]: encryptEnd 10cc8600
Mar 3 11:41:47-imac-3 kernel[0]: PMStats: Hibernate write took 3848 ms
Mar 3 11:41:47-imac-3 kernel[0]: all time: 3848 ms, comp bytes: 1109782528 time: 693 ms 1525 Mb/s, crypt bytes: 215856032 time: 425 ms 483 Mb/s,
Mar 3 11:41:47-imac-3 kernel[0]: image 281841664 (6%), uncompressed 1109782528 (270943), compressed 274692368 (24%), sum1 1a7db691, sum2 5851d8ce
Mar 3 11:41:47-imac-3 kernel[0]: zeroPageCount 119992, wiredPagesEncrypted 142036, wiredPagesClear 64284, dirtyPagesEncrypted 64623
Mar 3 11:41:47-imac-3 kernel[0]: hibernate_write_image done(0)
Mar 3 11:41:47-imac-3 kernel[0]: sleep
Mar 3 11:41:47-imac-3 kernel[0]: Wake reason: EC.PowerButton PWRB (User)
Mar 3 11:45:01-imac-3 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
Mar 3 11:45:01-imac-3 kernel[0]: Previous Sleep Cause: 5
Mar 3 11:45:01-imac-3 kernel[0]: AppleThunderboltHAL::earlyWake - complete - took 1 milliseconds
Mar 3 11:45:01-imac-3 kernel[0]: Thunderbolt Self-Reset Count = 0xedefbe00
Mar 3 11:45:01-imac-3 kernel[0]: TBT W (1): 0 [x]
Mar 3 11:45:01-imac-3 kernel[0]: wlEvent: en1 en1 Link DOWN virtIf = 0
Mar 3 11:45:01-imac-3 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
Mar 3 11:45:01-imac-3 kernel[0]: en1: 802.11d country code set to 'X0'.
Mar 3 11:45:01-imac-3 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
Mar 3 11:45:01-imac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
Mar 3 11:45:01-imac-3.local configd[17]: network changed: v4(en1-:192.168.1.100) DNS- Proxy-
Mar 3 11:45:01-imac-3.local netbiosd[153]: network_reachability_changed : network is not reachable, netbiosd is shutting down
Mar 3 11:45:01-imac-3 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xd000 ****
Mar 3 11:45:01-imac-3.local WindowServer[119]: CGXDisplayDidWakeNotification [713009376958]: posting kCGSDisplayDidWake
Mar 3 11:45:01-imac-3.local WindowServer[119]: handle_will_sleep_auth_and_shield_windows: NULL shield_window (lock state: 3)
Mar 3 11:45:09-imac-3 kernel[0]: en1: 802.11d country code set to 'SG'.
Mar 3 11:45:09-imac-3 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 149 153 157 161 165
Mar 3 11:45:10-imac-3 kernel[0]: MacAuthEvent en1 Auth result for: 68:7f:74:95:b3:73 MAC AUTH succeeded
Mar 3 11:45:10-imac-3 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
Mar 3 11:45:10-imac-3 kernel[0]: AirPort: Link Up on en1
Mar 3 11:45:10-imac-3 kernel[0]: en1: BSSID changed to 68:7f:74:95:b3:73
Mar 3 11:45:10-imac-3 kernel[0]: AirPort: RSN handshake complete on en1
Mar 3 11:45:10-imac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
Mar 3 11:45:11-imac-3.local UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'MyWireless' making interface primary (cache indicates network not captive)
Mar 3 11:45:11-imac-3.local configd[17]: network changed: DNS* Proxy
Mar 3 11:45:11-imac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
Mar 3 11:45:11-imac-3.local UserEventAgent[11]: Captive: en1: Not probing 'MyWireless' (cache indicates not captive)
Mar 3 11:45:11-imac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
Mar 3 11:45:11-imac-3.local configd[17]: network changed: v4(en1!:192.168.1.100) DNS+ Proxy+ SMB
Mar 3 11:45:17-imac-3.local SecurityAgent[146]: User info context values set for kathleen1
Mar 3 11:45:18-imac-3.local loginwindow[44]: Login Window - Returned from Security Agent
Mar 3 11:45:18-imac-3.local loginwindow[44]: USER_PROCESS: 44 console
Mar 3 11:45:18-imac-3.local airportd[67]: _doAutoJoin: Already associated to “MyWireless”. Bailing on auto-join.
Mar 3 11:45:18-imac-3 kernel[0]: AppleKeyStore:Sending lock change 0
Mar 3 11:45:18 --- last message repeated 1 time ---
Mar 3 11:45:18-imac-3 com.apple.launchd.peruser.503[185]: Background: Aqua: Registering new GUI session.
Mar 3 11:45:18-imac-3 com.apple.launchd.peruser.503[185] (com.apple.EscrowSecurityAlert): Unknown key: seatbelt-profiles
Mar 3 11:45:18-imac-3 com.apple.launchd.peruser.503[185] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Mar 3 11:45:18-imac-3.local launchctl[187]: com.apple.pluginkit.pkd: Already loaded
Mar 3 11:45:18-imac-3.local launchctl[187]: com.apple.sbd: Already loaded
Mar 3 11:45:18-imac-3.local distnoted[189]: # distnote server agent absolute time: 730.554072877 civil time: Mon Mar 3 11:45:18 2014 pid: 189 uid: 503 root: no
Mar 3 11:45:21-imac-3.local sharingd[209]: Starting Up...
Mar 3 11:45:21-imac-3.local WindowServer[119]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Mar 3 11:45:21-imac-3.local WindowServer[119]: Display 0x042728c2: Unit 2; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
Mar 3 11:45:21-imac-3.local UserEventAgent[188]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelDevice.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelSharedUserClient.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDSIVideoContext.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class Gen6DVDContext.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelDevice.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelSharedUserClient.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMedia.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextVEBox.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOHIDParamUserClient.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOSurfaceRootUserClient.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.AirPlayXPCHelper.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.blued.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.blued.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
Mar 3 11:45:22-imac-3.local SystemUIServer[196]: Cannot find executable for CFBundle 0x7fb8e3a30740 </System/Library/CoreServices/Menu Extras/Clock.menu> (not loaded)
Mar 3 11:45:22-imac-3.local SystemUIServer[196]: Cannot find executable for CFBundle 0x7fb8e3a31e40 </System/Library/CoreServices/Menu Extras/Battery.menu> (not loaded)
Mar 3 11:45:22-imac-3.local SystemUIServer[196]: Cannot find executable for CFBundle 0x7fb8e3a32510 </System/Library/CoreServices/Menu Extras/Volume.menu> (not loaded)
Mar 3 11:45:22-imac-3.local KiesAgent[240]: KiesAgent started, 7
Mar 3 11:45:22-imac-3.local WiFiKeychainProxy[220]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineCreate: created...
Mar 3 11:45:22-imac-3.local WiFiKeychainProxy[220]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
Mar 3 11:45:23-imac-3.local com.apple.IconServicesAgent[243]: IconServicesAgent launched.
Mar 3 11:45:23-imac-3.local WindowServer[119]: disable_update_timeout: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
Mar 3 11:45:23-imac-3.local WindowServer[119]: common_reenable_update: UI updates were finally reenabled by application "SystemUIServer" after 1.06 seconds (server forcibly re-enabled them after 1.00 seconds)
Mar 3 11:45:23-imac-3.local com.apple.SecurityServer[15]: Session 100008 created
Mar 3 11:45:23-imac-3 accountsd[246]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
Mar 3 11:45:23-imac-3.local SystemUIServer[196]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Mar 3 11:45:23-imac-3.local SystemUIServer[196]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Mar 3 11:45:23-imac-3.local KiesAgent[240]: checkAutoStart (null)
Mar 3 11:45:24-imac-3.local com.apple.SecurityServer[15]: Session 100011 created
Mar 3 11:45:25-imac-3.local apsd[219]: Unrecognized leaf certificate
Mar 3 11:45:26-imac-3.local com.apple.time[188]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
Mar 3 11:45:28 --- last message repeated 1 time ---
Mar 3 11:45:28-imac-3.local secd[242]: __EnsureFreshParameters_block_invoke_2 SOSCloudKeychainSynchronizeAndWait: The operation couldn’t be completed. (SyncedDefaults error 1025 - Remote error : No valid account for KVS)
Mar 3 11:45:28-imac-3.local secd[242]: __talkWithKVS_block_invoke callback error: The operation couldn’t be completed. (SyncedDefaults error 1025 - Remote error : No valid account for KVS)
Mar 3 11:45:30-imac-3.local secd[242]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
Mar 3 11:45:30-imac-3.local secd[242]: securityd_xpc_dictionary_handler WiFiKeychainProx[220] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
Mar 3 11:45:38-imac-3.local imagent[228]: [Warning] Services all disappeared, removing all dependent devices
Mar 3 11:45:39 walters-imac-3.local parentalcontrolsd[266]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
Mar 3 11:45:41-imac-3.local imagent[228]: [Warning] Creating empty account: PlaceholderAccount for service: IMDService (iMessage)
Mar 3 11:45:42 --- last message repeated 1 time ---
Mar 3 11:45:42-imac-3.local soagent[222]: [Warning] Services all disappeared, removing all dependent devices
Mar 3 11:45:42-imac-3.local soagent[222]: No active accounts, killing soagent in 10 seconds
Mar 3 11:45:44 --- last message repeated 1 time ---
Mar 3 11:45:44-imac-3.local Microsoft Entourage[268]: OTAtomicAdd32 is deprecated and will be removed soon. Please stop using it.
Mar 3 11:45:48-imac-3.local sandboxd[264] ([263]): storeagent(263) deny file-read-data /Users/1/Library/Preferences/com.apple.WebFoundation.plist
Mar 3 11:45:48 walters-imac-3.local usernoted[217]: Connection does not have the proper entitlement (com.apple.private.notificationcenter-system) to connect to the system notification center. All communication will be denied. center com.apple.storeagent
Mar 3 11:45:48-imac-3.local usernoted[217]: Connection does not have the proper entitlement (com.apple.developer.notificationcenter-identifiers) to connect on behalf of com.apple.appstore. All communication will be denied.
Mar 3 11:45:49-imac-3.local bookstoreagent[275]: DownloadManifest: Error moving legacy manifest - Error Domain=NSCocoaErrorDomain Code=513 "“manifest.plist” couldn’t be moved because you don’t have permission to access “com.apple.iBooksX”." UserInfo=0x7faa48d13f40 {NSSourceFilePathErrorKey=/Users/1/Library/Application Support/AppStore/manifest.plist, NSUserStringVariant=(
Move
), NSDestinationFilePath=/var/folders/st/k9plffx91lzbwlv6f3db2n2m0000gq/C/com.appl e.iBooksX/manifest.plist, NSFilePath=/Users/1/Library/Application Support/AppStore/manifest.plist, NSUnderlyingError=0x7faa48d13240 "The operation couldn’t be completed. Operation not permitted"}
Mar 3 11:45:49-imac-3.local bookstoreagent[275]: DownloadManifest: Error removing legacy download location - Error Domain=NSCocoaErrorDomain Code=513 "“AppStore” couldn’t be removed because you don’t have permission to access it." UserInfo=0x7faa4a9041c0 {NSFilePath=/Users/kathleen1/Library/Application Support/AppStore, NSUserStringVariant=(
Remove
), NSUnderlyingError=0x7faa4a904050 "The operation couldn’t be completed. Operation not permitted"}
Mar 3 11:45:49-imac-3.local sandboxd[264] ([275]): bookstoreagent(275) deny file-write-unlink /Users/kathleen1/Library/Application Support/AppStore/manifest.plist
Mar 3 11:45:49 --- last message repeated 1 time ---
Mar 3 11:45:49-imac-3.local sandboxd[264] ([275]): bookstoreagent(275) deny file-write-unlink /Users/kathleen1/Library/Application Support/AppStore
Mar 3 11:45:50-imac-3.local sandboxd[264] ([275]): bookstoreagent(275) deny file-read-data /Users/1/Library/Application Support/AppStore
Mar 3 11:45:50-imac-3.local sandboxd[264] ([275]): bookstoreagent(275) deny file-read-data /Users/kathleen1/Library/Preferences/com.apple.WebFoundation.plist
Mar 3 11:45:51-imac-3.local Microsoft Database Daemon[277]: OTAtomicAdd32 is deprecated and will be removed soon. Please stop using it.
Mar 3 11:45:52-imac-3.local Microsoft Entourage[268]: OTInetGetInterfaceInfo is unimplemented and will be removed soon. Please stop using it.
Mar 3 11:45:52-imac-3.local soagent[222]: Killing soagent.
Mar 3 11:45:52-imac-3.local NotificationCenter[225]: SOHelperCenter main connection interrupted
Mar 3 11:45:52-imac-3.local com.apple.dock.extra[252]: SOHelperCenter main connection interrupted
Mar 3 11:45:52-imac-3.local imagent[228]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver (soagent:222)
Mar 3 11:45:56 --- last message repeated 1 time ---
Mar 3 11:45:56-imac-3.local iTunes[271]: ApplePushService: APSConnection being used without a delegate queue
Mar 3 11:46:00-imac-3 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xd000 ****
Mar 3 11:46:00-imac-3.local Microsoft Entourage[268]: OTAtomicAdd8 is deprecated and will be removed soon. Please stop using it.
Mar 3 11:46:00-imac-3.local Microsoft Entourage[268]: OTCompareAndSwap8 is deprecated and will be removed soon. Please stop using it.
Mar 3 11:46:00-imac-3.local Microsoft Database Daemon[277]: OTAtomicAdd8 is deprecated and will be removed soon. Please stop using it.
Mar 3 11:46:00-imac-3.local Microsoft Database Daemon[277]: OTCompareAndSwap8 is deprecated and will be removed soon. Please stop using it.
Mar 3 11:46:01-imac-3.local Microsoft Entourage[268]: The function `CGSFlushWindow' is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance. Please use `CGSFlushWindowContentRegion' instead.
Mar 3 11:46:04-imac-3.local Microsoft Entourage[268]: OTCompareAndSwap32 is deprecated and will be removed soon. Please stop using it.
Mar 3 11:46:12-imac-3.local Microsoft Sync Services[283]: [0x17142e0] |ISyncManager|Warning| Sync Server is disabled.
Mar 3 11:49:58-imac-3.local Console[301]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored. -
How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
-I have a flashdrive with win7 on it.
-I mounted the ISO of win7 with toast for bootcamp to do its thing.Good luck.
Consider this a bump so that hopefully someone with better news spots your thread.
Allan -
MacBook Pro with 4GB of memory and a 2.3 GHz Intel. No other program running other than Preview.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;/Apple|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`find .??* -type d -name *.app -prune`; Pm "Hidden apps"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.
Maybe you are looking for
-
How to find out if SOCKET has CONNECTION on other END?
Hi Guys Need some help. I have written a small client server app. The CLIENT connects a SOCKET to the SERVER, after which can communicate. If the SERVER terminates, and after the CLIENT trys to perform an action, is there anyway to find out before th
-
I need to order an apple watch
i stay in India . Im not able to order an apple watch . So I request u to suggest something . Try it as soon as possible . Plz
-
P6WS "WSS header is missing from request. Can't do username token authentication."
I am getting the error "WSS header is missing from request. Can't do username token authentication." when trying to connect with SOAP and use Token Auth. I can get Cookies to work just fine, but i need to be able to connect to both. testWebReference.
-
Question about processor speed
Ok. I used to have an iBook G4 1.2 Ghz. I am considering getting one off of ebay with a 1.07 Ghz processor...if I had 768 RAM last time and had it with the one i am considering buying, would there big a noticeable difference in speed or performance?
-
Ilike iWeb. It's easy to use and makes me feel more powerful and artistic than I really am. :-) A sign of any great software. However I don't like the way it appends my domain from http://XXX.XXX.com to http://XXX.XXX.com/site. It really bugs me for