Macbook pro 13" (2009) boot-up slow or freezes after 8GB RAM upgrade?
The RAM is recognized when I check "about Mac". This is intermittent since I went from 2GB of RAM to 8 GB (2 x 4 GB) of RAM. Should I receed the boards? Are there other ways to diagnose why the system boots slowly or freezes on the blue screen before the logon screen appears? in one instance when the boot-up failed; froze on blue screen, I forced a power down and then rebooted again and the system allowed me to log on as usual. Currently running Snow Leopard 10.6.8. upgraded RAM in order to prepare for update to OS X Maverick 10.9.2. 8 GB of RAM by Crucial, purchased from Amazon.com, MAC specifications matched what was required. Please advise. Thank you.
Peter M wrote:
what do you mean "what exact MBP do you have?". what information are you looking for?
The 'model identifier' that can be found in System Profiler (System Information)>Hardware over view or the data that is generated when you enter the MBP serial number in the appropriate field in this link:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Based on the information you have provided, I believe your MBP's 'model identifier' is 5.5.
The correct RAM specifications for this MBP are: 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM. Does the new RAM conform to these specifications?
Ciao.
Similar Messages
-
Hello everyone.
I have been having this issue for a few months now and nothing works to resolve it. The biggest issue is that iTunes videos constantly stutter ever few seconds, the audio portion of the video is not effected. The most I have open at once is Safari, Skype, and iTunes, and possibly Open Office. Videos will even stutter with nothing else open other than iTunes. At times it sounds like the computer is running something in the background from hard drive noise.
I even upgraded the RAM to 8GB and it still has this problem! Nothing looks wrong in Activity Monitor other than occasionally the memory usage spikes up to 6GB, but even then the memory pressure graph is green. I dont understand how these non-intensive programs can use that much. The hard drive is barely 1/3 full.
Please help with a solution as nothing has worked so far. Thanks!
Macbook pro 13-inch mid 2012
2.5GHz dual core i5
8GB DDR3 RAM
500GB HDD
Intel HD graphics 4000Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. -
i have MacBook Pro (15-inch, Mid 2010) i7 , 2.6 GHZ, 8GB RAm, 500GB, I try to install mavericks it be come slow,
Let me know the reasonHey Cris from London,
I would try out the recommended steps in the following link:
OS X Mavericks: If your Mac runs slowly
http://support.apple.com/kb/PH13895
Let us know if any of the steps within resolved the issue.
Welcome to Apple Support Communities!
Take care,
Delgadoh -
HI All
This is my first post here. As mentioned I have a fall 2011 15"Macbook Pro fall 2011 with Core i7 2.0 GHZ, 8GB RAM and i was thinking of buying a 2013 Macbook Air 13". Is it a good upgrade? I do light video editing and day to day tasks like word processing, email etc.
How would the performance of the Macbook Air with the Core i5 with 4 gb Ram be compared to the old Macbook Pro 15 with Core i7 Quad 2.0 ghz with 8 GB Ram.
Thanks
SunnyThe main advantage would be a solid state drive. This will improve performance and speed moreso than RAM considerations. The disadvantage will be a loss of storage space. Moreover, one of the disadvantages of a SSD is that the more storage space used on it, the slower it becomes and the quicker it will deteroriate.
If you do video editing, I would take the GPU into consideration. Does your 15'' come with a discrete GPU? The integrated GPU on the MBA (intel HD 5000) is better than the 2011 MBP integrated GPU (3000), but it includes no discrete GPU.
Depending on how much storage space you use on your HDD currently + how many graphics intensive programs you run, you may want to consider upgrading your current machine with a SSD, upgrading your RAM on current machine to 16 gb (~160$ through macmemory or newegg), or purchasing a new Macbook Pro rather than Macbook Air.
Last thing I would add:
You will never be able to upgrade MBA RAM. It is soldered to the logicboard on the new models, non-retina included. You may wan to opt with the 8 GB RAM configuration. -
Macbook Pro 10.7 - Suddenly extremely slow and freezes
Hi, I've had my Macbook for about a year now and never had any problems up until now. All of a sudden today I turned on my Macbook Pro (running 10.7.1) and it took about a minute and 20 seconds to boot up. Once the desktop background picture shows up, the dock will come up about 5 seconds later, then the top bar 5 seconds later, then all of the icons on my desktop about 5 seconds later. If I click on ANYTHING the spinning beachball will come up and then changes back to the mouse icon in about a minute. I can't open any applications in the dock or open any folders, nothing happens and then the beachball comes back. I have tried booting in safe mode and that seems to work okay, but still a little slower than normal. Checked the activity monitor and nothing major seems to be going on. Reset PRAM, nothing changed. Checked disk utility and everything was fine. If anyone has any idea what might be wrong, please help me out here. I appreciate it, and thank you!
This seems like a very common issue! I purchased the OS X Lion the very next day after its release.. used it for a few days on my Macbook Pro.. I also updated all my applications (adobe, office, ilife etc) to make it run smoothly and compatible on the Lion.. but after a month or so, my machine became like the first macintosh Mr. Jobs made.. VERYYY SLOOWW!!!!! it would take 5-7 minutes to boot up, and the dock wud also take time!! The beach ball occupied my screen so much time, that I even forgot how the normal cursor looked like!
I decided to upgraded my RAM to 8GB, but same problem! I had like thousands of mails and didnt even find any solution to downgrade back to leopard!
I wasted almost a week to re-install snow leopard and all my applications!! and luckily google apps saved me with all my mails! Since then I have been ignoring every single update! I am happy with snow leopard!!
LION IS VERYY BUGGY! I wasted my $30 odd bucks!!! I often search for freezing beach ball lion!!! and seems there is no solution till now... NEVER GOING TO UPGRADE!!! -
Over the last 6 months my Macbook pro is running slow and freezes up a lot, I've done a check with EtreCheck, report below.
If anyone can offer some advice I would be very grateful, cheers....
Problem description:
Consistently slow running of all programs and freezes up for 2/3 mins
EtreCheck version: 2.0.11 (98)
Report generated 16 November 2014 00:35:40 GMT
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 9 days 23:20:46
Disk Information: ℹ️
APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 498.88 GB (318.43 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.gamed.plist
[failed] com.apple.sbd.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.AirPlayXPCHelper.plist
[failed] com.apple.AssetCacheLocatorService.plist
[failed] com.apple.awdd.plist
[failed] com.apple.corestorage.corestoragehelperd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.periodic-daily.plist
[failed] com.apple.periodic-weekly.plist
[failed] com.apple.softwareupdate_download_service.plist
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist
Launch Agents: ℹ️
[running] com.epson.eventmanager.agent.plist Support
[loaded] com.epson.ews.launcher.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.0.0 Support
Silverlight: Version: 4.1.10329.0 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 Support
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 180.44 GB
Destinations:
Seagate Backup Plus Drive [Local]
Total size: 999.53 GB
Total number of backups: 7
Oldest backup: 2013-12-06 12:44:36 +0000
Last backup: 2014-11-03 17:58:25 +0000
Size of backup disk: Adequate
Backup size 999.53 GB > (Disk used 180.44 GB X 3)
Top Processes by CPU: ℹ️
5% WindowServer
1% EEventManager
0% fontd
0% configd
0% AppleSpell
Top Processes by Memory: ℹ️
137 MB com.apple.WebKit.WebContent
116 MB Safari
47 MB sandboxd
47 MB WindowServer
43 MB Finder
Virtual Memory Information: ℹ️
913 MB Free RAM
1.43 GB Active RAM
635 MB Inactive RAM
933 MB Wired RAM
36.97 GB Page-ins
2.13 GB Page-outsYou may wish to read about maintenance and upkeep of the OS X, plus other
information, across several topics in this site with topics divided into Guides:
•Tech Guides - TheSafeMac:
http://www.thesafemac.com/tech-guides/
Sometimes, items may have been inadvertently downloaded by accident or due
to poor advisement, and of those some can be a cause of slowness in Mac OS X.
Also, the use of scanning antivirus software can be a cause of slow and disruptive
system issues; since antivirus for the most part is not effective due to the nature of
the Mac OS X and the inability of an AV application to have records of unknown, &
unsubstantiated or rumored issues in the wild, since few or none are known to exist.
The note in the etrecheck report of excessive Page Outs, implies directly that the
computer may need to have more RAM installed; a matching pair of higher capacity
correct spec RAM chips, could be purchased from a reputable source & installed.
As much as, perhaps 16GB in a RAM upgrade, depending on the MacBook build.
All of those red-lettered items in the report that did not load, appear to be system
parts; perhaps that may be something to investigate. Not sure why that is...
{Because today is part of a weekend, I'd suspect the time of day and weekday are
both behind the lack of an earlier reply to your post here. Also, if there have been
weather or other disruptions in the lives of those volunteers who offer help, then
maybe they've had to modify their plans around such events. Or power outages.
We had one here for more than an hour, and everything went out. Even phones.}
So hopefully some other knowledgable readers may contribute ideas on how to
resolve the issues; troubleshooting may be helpful, and to read through sections
of TheSafeMac to see if there is any malware, adware, or other odd activity that
may point to a cause; removal suggestions for those are in that site. Also, if you
had visited any torrent or sharing sites, or downloaded free yet contaminated items
from software download sites, they could also affect your computer. There are
a few areas in that web site worth reading through.
In any event...
Good luck & happy computing! -
2012 Macbook Pro won't boot from CD and freezes in single user mode
I'm rebuilding a macbook pro. Everyting was fine until I tried to install Snow Leopard from the disk. It goes to the Apple symbol no spinning wheel and you can hear the drive working for a few seconds but then stops. I've also tried booting to sinlge user mode but it just freezes after Loading System\Library\Caches\com.apple.kext.cahces\Startup\Extensions.
I've tried resetting the PRAM as well.If you have a 2012 MacBook Pro, you can't install Snow Leopard because it's not compatible, so it's normal that you can't start OS X.
Now, you have to install OS X Lion or Mountain Lion again. Hold Command, Option (Alt) and R keys while your Mac is starting to start into OS X Recovery, and reinstall OS X. After reinstalling OS X, you will be able to use your computer.
You can't run an older OS X version than the one that came with your computer, because of some reasons:
1. The hardware isn't compatible.
2. The firmware restricts the installation of older versions on the computer.
3. It's illegal: Apple doesn't allow you to install an older OS X version than the one that came with your computer, and it doesn't mind the method you use (a "normal" installation or a virtual machine) -
Macbook Pro 17 cannot boot into Mac OS anymore after making partition on windows
My Mac is a Macbook Pro 17", I got it from my friend (no original disc).
So after upgrading it to Mavericks (I was unable to install Windows using Boot camp of 10.6.8), Boot Camp successfully let me install Windows 7 Professional (x64).
The problem is that, I shrink the Boot Camp partition, and create another NTFS partition (so I can store data in the second partition as I usually do when using Windows). Now, I cannot boot into Mac OS anymore. Holding Command + Option + R does nothing, holding Option while startup shows a hard drive named Windows (instead of Mac HD). And no Recovery HD tooshakhriyor,
you’re going to need to purchase a replacement pair of the original grey installation DVDs for your MacBook Pro from Apple to be able to fix this problem. -
My Early 2008 Macbook Pro will not boot with anything greater than 3GB of Ram.
Early 2008 Macbook Pro 4,1
2.4 GHz Intel Core 2 Duo
3 GB 667 MHz DDR2 SDRAM (PC2-5300)
OS X 10.8.4
Serial: W88450LR1XR
I keep reading mixed reviews saying that 3GB is the max while others say this system supports up to 6GB. I have tried both Kingston and Crucial and PNY and I get the same results. I can have 1x2GB stick and 1x1GB stick but not 2x2 GB sticks. Both 2 GB sticks work independently but they will not work together. They are PC2-5300 667 MHz.
I would really love to have at least 4 GB of ram in this computer. Is it not possible?
Thanks in advance.
Symptoms:
If I put 2x2 GB in the computer and power it up, the little light on the front of the computer comes on but the screen stays black. No post beeps or anything to indicate a failure or that it's running (except the light that comes on when I hit the power button)Ok - so no one is replying. I just contacted Other World Computing who says that my Laptop will support up to 6GB of ram. I just ordered the memory directly from them. I have 6GB in the mail and should arrive tomorrow. I will report that if their guarenteed ram will work.
-
OSX 10.75 Macbook Pro 30 Minute Boot and Slow After Clean Install
Here is my problem.
I recently purchased a mabook pro which was dropped with the intentions of fixing the screen.
I was able to initially install OSX with Internet recovery, then for some reason on reboot the password would not work.
I was able to fix the password problem, but the extremely slow boot time persists.
This is a fresh install so I am not sure why it is so slow.
√
PMAP: PCID enabled
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
vm_page_bootstrap: 474240 free pages and 41856 wired pages
kext submap [0xffffff7f80736000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000736000]
zone leak detection enabled
standard timeslicing quantum is 10000 us
mig_table_max_displ = 73
TSC Deadline Timer supported and enabled
AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
MAC Framework successfully initialized
using 10485 buffer headers and 7290 cluster IO buffer headers
IOAPIC: Version 0x20 Vectors 64:87
ACPI: System State [S0 S3 S4 S5]
PFM64 (36 cpu) 0xf10000000, 0xf0000000
[ PCI configuration begin ]
AppleIntelCPUPowerManagement: Turbo Ratios 6689
AppleIntelCPUPowerManagement: (built 16:32:09 Aug 23 2012) initialization complete
console relocated to 0xf60010000
PCI configuration changed (bridge=16 device=5 cardbus=0)
[ PCI configuration end, bridges 12 devices 18 ]
mbinit: done [64 MB total pool size, (42/21) split]
Pthread support ABORTS when sync kernel primitives misused
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDataless load succeeded
AppleIntelCPUPowerManagementClient: ready
BTCOEXIST off
wl0: Broadcom BCM4331 802.11 Wireless Controller
5.106.198.19
FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffeea47f4; max speed s800.
rooting via boot-uuid from /chosen: 47A5C6D9-B884-3C97-9E0B-83613298B969
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HTS545050B9A302 Media/IOGUIDPartitionScheme/MacEvans@2
BSD root: disk0s2, major 14, minor 2
AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
[IOBluetoothHCIController::setConfigState] calling registerService
Kernel is LP64
macx_swapon SUCCESS
Waiting for DSMOS...
BCM5701Enet: Ethernet address c8:2a:14:53:09:a2
AirPort_Brcm4331: Ethernet address e4:ce:8f:07:00:ce
IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
IO80211Interface::efiNVRAMPublished():
AGC: 3.1.33, HW version=1.9.23, flags:0, features:20600
SMC::smcHandleInterruptEvent WARNING status=0x0 (0x40 not set) notif=0x0
Previous Shutdown Cause: 3
å
[AGPM Controller] build GPUDict by Vendor1002Device6760
DSMOS has arrived
** Device in slot: SLOT--1 **
in func createVirtualInterface ifRole = 1
Created virtif 0xffffff8007b0a400 p2p0
AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
AppleBCM5701Ethernet: a 1 extract_link_settings - EEE logic error
Ethernet [AppleBCM5701Ethernet]: Link up on en0, 10-Megabit, Half-duplex, No flow-control, Debug [794d,0100,0de1,0300,0000,0000]
Ethernet [AppleBCM5701Ethernet]: Link down on en0
Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,45e1,0000]
Ethernet [AppleBCM5701Ethernet]: Link down on en0
Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0321,0de1,0300,45e1,0000]
en1: 802.11d country code set to 'US'.
en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165So I figured out what the problems was.
The Hardrive was going bad. I had another hardrive that I knew was good taken from another Mac, I swapped them. With the other drive the computer booted up fine. I later took the drive to the Genius bar and the confirmed what I already knew. -
MacBook Pro (Late 2009) being extremely slow
I brought it into the Apple Store after it wouldn't boot, and they recommended a new hard drive, so I went out and bought a 500GB for $50, and installed it myself with no problems.
Now, I've had no problems for the past 3 weeks, but just recently I can't even open the finder, or a preview of a file without waiting at least 10 seconds.
This is a huge problem, and I've had nothing but bad luck with Apple for the past few months. Any ideas?
Video: http://jamesmillsphoto.com/IMG_0339.MOVHello,
Maybe you are having the same trouble than me ?
You have :
- a 2009 MBP that is a 5.3 model according to Mactracker
- this model should have installed the infamous " EFI Firmware Update 1.7 "
- a new faster hardrive
My MBP doesn't even see his new internal HD, but works fine with the same drive on firewire 800.
The only solution seems to downgrade from EFI 1.7 to 1.6. Someting only an Apple Store Genius can do. I have an appointment this week to do so.
Another idea : Change the desktop image of your MBP, Ironman might bee out of battery .
See my post and tell me if it works for you : https://discussions.apple.com/thread/3035208 -
MacBook pro won't boot up with the screen after Yosemite
since updating to Yosemite my Mac book hasn't woken up from sleep
i can hear it turn on when I hit the power button but no screen or keyboard lights up
really need some help please
my Mac book pro is only 2-3 years oldHi Bizzlewood,
Welcome to the Apple Support Communities!
I know it can be both frustrating and concerning when your computer doesn’t seem to wake from sleep. There may be a few different troubleshooting steps I would suggest in this situation. Please refer to the attached article for troubleshooting information.
OS X: When your Mac doesn't sleep or wake
Your computer cannot wake from sleep
Make sure your computer isn't powered off by pressing the power key for one second.
If you're using an external display, make sure your display is not powered off or unplugged.
If you are using a Mac notebook:
Make sure the computer's battery is charged. Try connecting the power adapter to the computer, then press the power button for one second to see if the computer powers on.
Make sure the AC power cord is connected securely to the power outlet, and that the outlet it is working correctly. Confirm the power adapter or cable is attached firmly.
If your computer is plugged into a power strip, make sure the power strip is not turned off. Check to make sure other items connected to the power strip are receiving power.
Confirm the right power adapter is connected on Mac notebook computers. If a lower wattage power adapter is used than the one that came with your Mac, it may not provide enough power to charge the battery while the computer is powered on. Make sure there is no debris in the MagSafe port that might prevent charging. When your MagSafe cable is connected properly, you should see a green or orange light on the connector.
If the issue is still not resolved after verifying the above information, please be sure to follow the steps listed at the bottom of the article in the Additional troubleshooting section.
Cheers,
Joe -
how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
Iam new to coding. please help me.try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0 -
Macbook Pro Mid 2009 Processor 2.26 GHz Intel Core 2 Duo, Memory 2 GB 1067 MHz DDR3. iOS 10.10.1 (14B25). My mac is running slow and have ran EtreCheck. Please help me fix my mac. Thanks!
Problem description:
My mac has been very slow lately. Any suggestions?
EtreCheck version: 2.1.2 (105)
Report generated December 14, 2014 at 8:15:29 PM PST
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:54:52
Disk Information: ℹ️
Hitachi HTS545016B9SA02 disk0 : (160.04 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
MacHD (disk0s2) / : 159.05 GB (49.15 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Startup Items: ℹ️
DVD3EnablerService: Path: /Library/StartupItems/DVD3EnablerService
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist [Details]
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.coreservices.appleid.authentication.plist [Details]
[failed] com.apple.icloud.fmfd.plist [Details]
[failed] com.apple.secd.plist [Details]
[failed] com.apple.security.cloudkeychainproxy.plist [Details]
[failed] com.apple.telephonyutilities.callservicesd.plist [Details]
Problem System Launch Daemons: ℹ️
[failed] com.apple.ctkd.plist [Details]
[failed] com.apple.icloud.findmydeviced.plist [Details]
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist [Details]
[failed] com.apple.softwareupdate_download_service.plist [Details]
[failed] com.apple.wdhelper.plist [Details]
[failed] com.apple.xpc.smd.plist [Details]
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
[not loaded] com.teamviewer.teamviewer.plist [Support]
[not loaded] com.teamviewer.teamviewer_desktop.plist [Support]
Launch Daemons: ℹ️
[running] com.adobe.ARM.[...].plist [Support]
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[not loaded] com.teamviewer.teamviewer_service.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.nds.pcshow.plist [Support]
[invalid?] com.nds.pcshow.uninstall.plist [Support]
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacHD: Disk size: 159.05 GB Disk used: 109.90 GB
Destinations:
KINGSTON [Local]
Total size: 30.88 GB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 30.88 GB < (Disk used 109.90 GB X 3)
Top Processes by CPU: ℹ️
6% WindowServer
0% AppleSpell
0% SystemUIServer
0% powerd
0% Google Chrome
Top Processes by Memory: ℹ️
131 MB softwareupdated
112 MB Google Chrome
41 MB Finder
34 MB Google Chrome Helper
32 MB WindowServer
Virtual Memory Information: ℹ️
51 MB Free RAM
587 MB Active RAM
551 MB Inactive RAM
350 MB Wired RAM
10.96 GB Page-ins
865 MB Page-outs
Diagnostics Information: ℹ️
Dec 14, 2014, 07:37:58 PM Install Adobe Flash Player_2014-12-14-193758_[redacted].crash
Dec 14, 2014, 07:21:27 PM Self test - passedPlease describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The usual results of posting etrecheck output on this site without a full description of the problem are very poor.
The many "failed" warnings that etrecheck sometimes spews mean nothing. Those warnings are not a reason to reinstall the OS, or to do anything else at all. They should be ignored.
The better your description of the problem, the better the chance of a solution.
For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup. -
I am running OS X Yosemite on my four year old MacBook Pro which has become progressively slower and is loaded with applications I no longer use. I plan to start afresh by formatting a new 1TB SSD as a boot disk and reinstalling Lightroom 5 and PhotoShop CC.
Is there a list of the files and/or folders that contain Settings and Preferences which can be copied from the old system to the new?with your cc apps you should try to use the sync feature. that's never worked consistently for me, but when it does work, it's helpful.
there are preference folders and presets and settings that you could copy but you're better off installing fresh because a common problem for people with adobe program issues is a settings issue.
Maybe you are looking for
-
In RG23D Register is it possible to update general sales
HI, Experteese, My Client is a Trading Industry and they will do most of the times imports and becz nature of business he will pass excise benefit to some particular excisable customers, *here is the issue In SAP we can make entry of vendor excise
-
HOW CAN I TRANSFER MY SONGS FROM OLD COMPUTER TO NEW???? PLEASE READ
MY OLD COMPUTER IS TOO SLOW AND I NEED MY SONGS TO GO ON MT NEW LAPTOP (YAY ME)... I DONT WANT TO WASTE A MILLION CD'S JUST TO GET MY NEW SONGS ON THERE SO WHAT CAN I DO....I TRIED USING A JUMO DRIVE AND THAR DOESNT WORK EITHER CUZ AS AS SOON AS I DI
-
Is there a Version 4 soon or is it OK to buy now?
I want to buy the unlimited version and am not familiar with the upgrade history. I see in the past you have to pay full price for next version even if you buy within the same month Thanks
-
Invoice Document No. in F.10
Dear Experts, Please advise how to bring Invoice Document No. in F.10 (Advance Return for Tax on Sales / Purchase). Thanks, Debasish
-
WRTU54G-TM not keeping its IP address, generally being annoying
I bought a Linksys WRTU54G-TM for the TMobile @Home service. Setting it up is proving to be absurdly frustrating because the webbased interface refuses to acknowledge that I have given it an IP address. I set the IP to 192.168.1.20, static IP, conf