Macbook pro 13 2012 graphical glitches

Processor  2.9 GHz Intel Core i7
Memory  16 GB 1600 MHz DDR3
Graphics  Intel HD Graphics 4000 1024 MB
Software  OS X 10.9 (13A603)
when I insert a dvd and the dvd player starts automatically or when entering time machine
this used to  happen more often when I updated to 10.9.2 so I installed a clean 10.9
I get bars and glitches all over the screen

Make an appointment at an Apple store genius bar for a FREE evaluation.  Take copy of the display image with you just in case the MBP starts behaving in front of the technician.
Ciao.

Similar Messages

  • Macbook pro retina graphic glitch

    Hello,
    I'd like to share with you my story with the problems I've had with my macbook pro retina 15' 2012 (with both intel and nvidia graphics) and ask for some help.
    First of all, back when it still had Mountain Lion as its OS I already detected some graphic glitches. When I started the mbpr, 1 out of 5 times it would load buggy. The dock would shake whenever I move the mouse over it, exposé would lag a lot and eventually scrolling in Safari was terrible, incredibly shaky. Basically every animation on the OS went laggy or just at 10 fps.
    However the performance in terms of speed and results was still OK. If I played a game I would detect no error whatsoever.
    So after some months of ignoring it because I had work and couldn't take the mac to the store I decided to take it. It was getting worse as it started to happen more often than usual. By then I had already upgraded to Mavericks (no clean install, just updated) and the problem still persisted.
    Visit #1:
    After explaning the problem and being able to show it to the genius they took my mac. They called a couple of days after telling me it was a OS issue and they did a clean install of Mavericks.
    So I took it home, reinstall everything from scratch, they told me it may be an account/user issue so I better not use time machine to recover anything.
    After a month it started to happen again. I have to say that it happen after I had already installed everything quite some time before, not right after installing any particular app or while running any.
    It would load buggy again 1 out of 2/3 times and it wouldn't stop until I restarted and if I was lucky enough it would load OK.
    Visit #2:
    I returned to the genius and explained again the problem. They decided that it had to be some graphic issue related to the intel or nvidia systems so they replaced the logic board.
    Again a couple of weeks later I detected the problem again.
    Visit #3:
    Once more to the store, they were quite puzzled that even after replacing the motherboard it would still show the issue.
    After doing some tests they decided to reinstall Mavericks. Once installed they found no issue so they decided it was solved.
    After this I had to return once again because it turn out that they forgot to connect the keyboard backlight system and it wouldn't light.
    Anyway, this time I decided to install only the absolutely necesary apps for my work. I even downloaded the newest versions of all of them (if they had newer). Most of those apps are from the Mac App Store and the ones that are not are absolutely famous and used by thounsands of people, not that I use alphas or betas of any app.
    One important detail is that the problem was getting worse. Now every time I started the mac it would be buggy and it was extremely shaky, it was impossible to read while scrolling in Safari now. Sometimes when using exposé/mission control it would even show weird pixels on screen. Every time I had this problem it was worse, more shaky and more often.
    Visit #4:
    Being already a VIP visitor of the genius bar I went decided to solve the problem once and for all. I told them every detail, they saw the problem and I insisted on the software I had was completely "normal". They told me they would replace the screen, the logic board again and the IO just in case.
    So imagine my surprise when I receive a call from the genius who was repairing my machien saying that after reinstalling Mavericks it showed no issue! I was furious. They insisted that it was some app I had installed and that I needed to install one app at a time, wait ONE WEEK and if nothing happens install the next.
    They were not kidding aparently. After complaining I had no choice but to take my mac back and....here I am.
    So my question (after the diary I've written, sorry) is:
    Is this really being caused by an app I have installed? Is really an app capable of crash the entire animation system and only while in the OS UI and not in games? I've never had any app running on the background besides Fantastical (from Appstore) and Dropbox (updated).
    I am listing the apps I had last time I resintalled everything:
    1. 2Do (appstore)
    2. Indesign CC
    3. Appcleaner
    4. Autocad 2014
    5. World of warcraft
    6. Dropbox
    7. Evernote (appstore)
    8. Fantastical (appstore)
    9. Keynote, Pages & Numbers (appstore)
    10. Pixelmator (appstore)
    11. Sketchup 2014
    12. Skype
    13. Steam
    14. The unarchiver
    15. Transmission
    16. VLC
    17. iPhoto
    So, 17 apps, which I believe are just a few. Is there any of those apps you think may cause any issue? I haven't installed anything yet. I am using my old macbook pro (which btw have every app I had in the buggy retina with no problem whatsoever) while I try to see if the problem persist while installing nothing.
    I still don't believe it is a software problem. Since it appears every time sooner and with more "intensity" I suspect it might be hardware but I am no expert.
    Thanks for any help or info you can share!

    Go for a few day (2-3) without installing any apps. Then install AutoCAD 2014 first and run only that for another couple of days. See if the problems resurface. If not, go ahead and reinstall all software, making sure that you create a clone after everything's installed (try Carbon Copy Cloner - they have a few 30-day evaluation period, I believe).
    If problems resurface, you'll know that it's hardware.
    Good luck,
    Clinton

  • Freezing Macbook Pro. Graphical glitches and occasional 3 tones on start up. Hardware test shows no errors. Is it RAM or a graphics card on the way out, or software?

    Recently my MacBook Pro has been freezing and showing bad graphical glitches. Multiple restarts eventually fix it and a couple of times the three tones break, three tones break warning has occurred on start up. From what I can find this is usually a RAM error but after doing a hardware check I get the response all is OK. This still happens after the check and I am unsure what the problem could be. Can anyone help? Could it be a memory issue, a hard drive issue, Graphics card issue (drivers are up to date) or is something up with the software. I also have a Bootcamp partition running Windows 7 too and this is a problem that presents itself there too.

    Most likely to be RAM:
    Beeps on startup:
    1 beep = no RAM installed
    2 beeps = incompatible RAM types
    3 beeps = no good banks
    4 beeps = no good boot images.
    5 beeps = processor is not usable
    http://support.apple.com/kb/HT2538
    I would suggest you take it to an Apple Store for a free diagnostic.

  • How to upgrade my Macbook Pro's Graphic Card?

    I have a Early 2012 13 inch Macbook Pro and it's ***** when I play games.
    Here are the specs:
    - 2.8 GHz dual-core Intel Core i7
    - 6 GB RAM
    - Intel HD Graphics 3000 384 MB
    - OSX Mavericks 10.9.2
    - 750 GB HDD 1333 MHz DDR3
    It lags a lot when I play such an old games such as GTA Vice City (the FPS drops a lot when my mac getting hot) or GTA San Andreas (quite stable). Both of them aren't modded and still original. Is there any way to upgrade my Macbook Pro's graphic card?

    You cannot upgrade the Graphics card on a laptop because everything is built into the logic board. Unfortunately your perticular graphics chip is actually built into the CPU, and is a very low performing chip which would definately make gaming hard.
    Sorry for the bad news.

  • Macbook Pro 2012 or Macbook Air 2013

    Hello,
    I looking to buy a Apple Laptop but really confused to which one to get Macbook Pro 2012 or Macbook Air 2012. Here are is what I do:
    Web Development (PHP, Python Django, Node.js, Tornado)
    Photoshop (4 times in 10 uses)
    Illustrator (1 time in 10 uses)
    Web surfing
    Need a good backup time (min of 3hrs)
    Want a good performance
    Will have it for 4 years

    Photoshop (4 times in 10 uses)
    Illustrator (1 time in 10 uses)
    When you use these, you'll be thankful you got a Pro.
    Web development
    Web surfing
    Both are about equal.  Some game performance may be better on a Pro, especially if it uses the graphics chip.
    Need a good backup time (min of 3hrs)
    Don't you mean max?  A lot is dependent on how much data you have to backup and whether you choose to clone or use Time Machine.  Clones are faster the second go around.  Time Machine can be fast, but if you use it for archival, you'll be spending time turning off Time Machine, and archiving necessary to keep archives off the Time Machine drive.  And Time Machine needs at least twice the capacity of your original, where clones only need the original.
    Want a good performance
    Pro is invariably better performance than Air.
    Will have it for 4 years
    Both only get a warranty up to three years if purchased within the first year from date of computer purchase. 
    http://www.safeware.com/ offers insurance, but not warranty.  
    Some credit card companies extend manufacturer warranty.  Check if yours does.

  • How to properly disconnect a Mini Display Port (MDP) from a Macbook Pro 2012, 1,9?

    Hello:
    I was wondering if any Macxperts out there had any idea on how to properly disconnect a MDP Thunderbolt Cable from a 2012 1,9 Gen. Macbook Pro. From my experience with older Macbooks the command was "Command + F7" or something of the sort.
    On my Macbook Pro 2012, there is no such button or commend to properly disconnect the plug; as if one were to disconnect or "eject" an external HD. I have read some articles on Google that some people just disconnect the plug and that action is sufice to disconnect an external video projection (Ex: Flat Screen Samsung).
    Can a Macxpert or Genius comment on this piece of information? I would really apprecite some light shed on this situation. I just don't see unpluggin a cable connected to a video source enough to properly shut off a connection with out damaging the Macbook Pro's video card.
    Thanks
    A

    Hello, Niel:
    I just answer my own question. Forgive me but I am not up-to-date on the techlingo (Hot Swappable) but I just googled the term and found my answer.
    Thanks again.
    Best,
    A

  • PLEASE HELP me select new internal hard drive for Macbook Pro 2012 (non-retina)

    Good afternoon.
    I just bought a Macbook Pro 2012 (non-retina) 15 inch from a friend.  I think it is running Mountain Lion (has not been upgraded to Mavericks yet), and has iLife on it.  It came with the stock 500 gb 5400 rpm internal hard drive.  At home, I only have the Snow Leopard OS installation Cds and a copy of iLife 2011 installation Cds.  I am going to buy 16 gb of RAM from Other World Computing to install.
    I want to replace the hard drive with a 1 tb hard drive, preferably something that is $100 or less.
    I talked to Other World Computing (OWC) and looked at the Data Doubler Option to replace the optical drive with a Solid State drive, but decided that for now I want to keep the optical drive inside the computer for portability issues.
    I know that Solid State drives are better, but they are still too small, and I want the ease and portability of a 1 tb size INSIDE my computer.
    Initially I was going to order this from Other World Computing: 1.0TB 2.5" HGST Travelstar 7K1000 7200RPM SATA 6Gb/s 9.5mm Notebook Drive 32MB Cache. *'New' Factory Replacement with 2+ Year HGST Warranty*    As of April 4, 2014 it's on sale for $79
    But then I started reading some of the discussions online and thought maybe I should get a hybrid solid state drive?
    I saw on Amazon the Seagate 1TB Solid State Hybrid Drive SATA 6Gbps 64MB Cache 2.5-Inch ST1000LM014  It's on sale for $94.
    But according to some reviews, this Seagate has a platter that is only 5400rpm, unlike the previous Seagate Momentum that has a platter speed of 7200rpm.
    How reliable are the Seagate, versus a Toshiba or Western Digital or Hitachi or something else?
    Here are my questions about replacing the hard drive:
    1.  Is a hybrid solid state drive going to need some kind of special formatting after I put it into the macbook so that I can put the operating system on it?
    2.  Is a "normal" platter hard drive more reliable than a hybrid solid state drive?
    3.  Is there any additional driver or special software that I have to install for a hybrid solid state drive?
    4.  Currently there is no personal data stored on the computer.  Can I just put the new hard drive in, and then insert the snow leopard install cd?
    5.  If I install snow leopard, can I just go to the App store and get the free upgrade to Mavericks?
    6.  If I want to do the "Data Doubler" option in the future and add a normal Solid State drive into my computer, will it have trouble interacting with the 1 tb hybrid solid state drive?
    I would love to get some recommendations about the smartest option to upgrade my hard drive with something that will be fast (I edit lots of photos) and large (1 tb) that isn't going to cost too much.  I don't know much about the different brands or options (and there are so many listed in tons of online reviews), that I got really overwhelmed and confused by the info out there.
    I would really appreciate any help and advice.  I've never switched out a hard drive before.
    PLEASE HELP !!!  Thanks!
    Here is the "About this Mac" Info:
    Macbook Pro 15-in Mid 2012
    Model Identifier: MacBookPro9,1
    Processor: 2.3 GHz Intel Core i7
    Memory: 4 GB 1600 MHz DDR3
    Software: OS x 10.8.5
    Storage (Hard drive): APPLE HDD ST500LM012 Media, Rotational, SATA, GPT (GUID Partition Table)

    1.  Is a hybrid solid state drive going to need some kind of special formatting after I put it into the macbook so that I can put the operating system on it?
    The boot drive, regardless of what it is, needs to be formatted as Mac OS Extended (Journaled).  This is standard with OS X.
    2.  Is a "normal" platter hard drive more reliable than a hybrid solid state drive?
    There are arguments pro and con.  Bottom line, SSD's and hybrid drives are still quite expensive per GB than standard hard drives.  If you have the bucks and are a speed demon, go ahead.   I have better use for my money.   Standard hard drives are mechanical and may wear out over time.  But even though SSDs are not mechancial, they can still go bad and ultimately they even have a limit to their write capacity.  The jury is still out on this debate.
    3.  Is there any additional driver or special software that I have to install for a hybrid solid state drive?
    No
    4.  Currently there is no personal data stored on the computer.  Can I just put the new hard drive in, and then insert the snow leopard install cd?
    You can physically put the hard drive in but probably not install Snow Leopard on this MBP.
    The mid-2012 MacBookPro9,1 models came with Lion 10.7.3 (11D2097) preinstalled.   It is very unlikely you would be able to install Snow Leopard on it.  Historically you cannot install a version of OS X that is earlier than the version that came with your Mac (even if you replace the hard drive).
    5.  If I install snow leopard, can I just go to the App store and get the free upgrade to Mavericks?
    Not via Snow Leopard on this MBP.  See my response to #4.
    6.  If I want to do the "Data Doubler" option in the future and add a normal Solid State drive into my computer, will it have trouble interacting with the 1 tb hybrid solid state drive?
    No.  They are completely independent of each other; they are just independent storage units (drives) and their RAM does not interact.

  • Hey, for some reason i turned on my macbook pro 2012 and it says i have no internet access. I then found out that it also says that my self assigned ip address will not connect to the internet. How is this and how can i fix it?

    hey, for some reason i turned on my macbook pro 2012 and it says i have no internet access. I then found out that it also says that my self assigned ip address will not connect to the internet. How is this and how can i fix it?

    Reset your modem.

  • Can I change mi Macbook pro 2012 to a new one, because my fan died during an update?

    Well the other day I was using my Macbook Pro 2012 (not the retina) and I made an update soy leave my Mac during the update because I went downstairs for dinner, but when I went to se my Mac it make a strange sound on the fan, so I scared a lot and I download a program to see how my fan was doing and it sayed "0 rpm". My fan died during the update.
    So my question is, Can I change my Mac to another one?

    Welcome to Apple Support Communities
    First, make a SMC reset > http://support.apple.com/kb/HT3964
    If it doesn't work, the fan is defective. If you take the MacBook Pro to an Apple Store, Apple will try to repair the defective part, so you shouldn't need a new MacBook. However, if your MacBook Pro doesn't work correctly after replacing fans, Apple might give you a new Mac

  • Hi, i bought a irig to connect my guitar on my macbook pro 2012, but when i use the irig in my mac, it doesnt recognize, so i cant choose it on preferences of sound, what can i do?  (the sound of my guitar goes by IRIG but I can not hear due to feedback a

    hi, i bought a irig to connect my guitar on my macbook pro 2012, but when i use the irig in my mac, it doesnt recognize, so i cant choose it on preferences of sound, what can i do?  (the sound of my guitar goes by IRIG but I can not hear due to feedback and when I try to record another track on the garageband, the sounds recorded on the new track is catching the sound of another track recorded)

    Turn the internal mic level off. Use headphones as monitors.

  • Camera using with Windows 7 on my Macbook Pro(2012)

    Hey there,
    I have a Windows 7 on Macbook Pro 2012 (Bootcamp). I have no idea, how I can use my built-in camera on the Windows side?
    Do I have to download a software?
    Thanks so much!!!

    You need to install it.
    Go back to OSX, open Boot Camp Assistant, read and follow the directions on page 1

  • Can i install samsung 850 pro 1 tb solid state drive in my "macbook pro 2012 mid".

    Hi, anyone know. can i install samsung 850 pro 1 tb solid state drive in my "macbook pro 2012 mid". any compatibility issues?

    "In addition to TRIM, I just stumbled on this discussion. One of the posters is having some odd difficulties with that combination."
    Yup and that's why I've avoided any 3rd party SSDs.
    I only deal with:
    http://eshop.macsales.com/shop/SSD/OWC
    I've done 6 so far and no problems at all; formatting, installing nothing. Total no brainer. I did have a small formatting problem on my last one but I called them and solved the problem before the guy got on the phone. He immediately offered a return sticker (RMA) but I didn't need it and the MBP is running fine.

  • How can I fix my Superdrive slot on my MacBook Pro 2012?

    I installed a brand new SSD in my MacBook Pro 2012 yesterday. To do this, I cloned my [then] existing HDD to it using SuperDuper!. Now, my DVD slot won't accept discs. I tried opening DVD player and it said that "a valid DVD drive could not be found". I plugged in my old HDD and booted up from that, and tried again, but to no avail. Is this something wrong with my Superdrive or something? Or is my OS corrupt? Could my Superdrive be burnt out?

    Uh oh, and that even before the warranty is over...
    If I were you (well... not really...), I'd pick my MBP from here, then do as if I were to replace "everything optical drive and cable" -- except I'd replace the existing gear with itself. Slowly, step by step, and veeeery carefully.
    If it doesn't work then, maybe the next AASP isn't that far away, at least.

  • My macbook pro 2012 mac os x lion 10.7 stuck at apple logo with spinn wheel

    my macbook pro 2012 mac os x lion 10.7 stuck at apple logo with spinn whell and i held it for hours nothing happend so i tried to boot from recovery hd so i started mac and pressed option key ...so a screen appears telling recovery hd with bar for wifi connection selection then i put my wifi details and choose roc. hd it again booted with same apple logo with spin wheel...what to do now ....i haven't tried reseeting pvram..etc nvram..

    Hi there lakra,
    You may find the troubleshooting steps in the article below helpful.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    -Griff W. 

  • Hi, I have a macbook pro 2012 13 inch, everytime i go to watch a video (youtube/uni lectures) online (i use firefox), the video plays but if i go into another tab, the audio keeps playing, but the image on screen will be frozen. It gets really frustrating

    Hi,
    I have a macbook pro 2012 13 inch, which i use for uni and youtube etc. I use firefox for my web browsing, whenever I go to watch videos, from youtube or even uni lectures (for all my subjects) the video and audio play fine, but as soon as i switch into another tab, the audio continues to play whilst the video lags and stops all together, freezing on the current screen. The timestamp on the video players also stops, which gets incredibly frustrating when I am watching uni lectures, does anybody know how to fix this?? Please help.

    Which os version are you using? 
    Which Firefox version? 
    Have you posted in the Firefox forums or contacted their tech support for assistance? 
    Have you made sure you are using the latest version of Adobe Flash Player? 

  • Why Does Retina MacBook Pro (2012) Suddenly Hibernate With Lid Open?

    I'd like to know why my Retina MacBook Pro (2012) at certain times suddenly go into Hibernate mode when I'm actively using it with the lid open and what I can do to prevent this.
    I know this is hibernate because of what I see in the Console logs and the fact that I can't trigger a wake by using the keyboard/trackpad/mouse.  Only the power button causes it to wake up.
    This usually happens when I wake it from sleep and plug it into an external monitor via HDMI to HDMI connection.   The lid is open and I use both displays.    This happens about 30 seconds to a minute after I wake from sleep.  At the time I'm not plugged into the power supply because I believe it's generally a good idea to let the batter drain and the recharge it.  The last time this happened it was about 35% to 40% charged.
    Hardware Overview:
      Model Name:    MacBook Pro
      Model Identifier:    MacBookPro10,1
      Processor Name:    Intel Core i7
      Processor Speed:    2.6 GHz
      Number of Processors:    1
      Total Number of Cores:    4
      L2 Cache (per Core):    256 KB
      L3 Cache:    6 MB
      Memory:    8 GB
    Software:
    OS X Yosemite (all latest updates installed)
    {some 3rd party software}
    Let me know if you need more information.
    For the gory details of what I see in system.log, read on:
    This is about the time the hibernate happens.  I've replaced my laptop's name with {COMPUTER NAME}
    Mar 20 18:29:26 {COMPUTER NAME} identityservicesd[375]: <IMMacNotificationCenterManager: 0x7f87d510c9e0>: notification observer: com.apple.iChat   notification: __CFNotification 0x7f87d5210a90 {name = _NSDoNotDisturbEnabledNotification}
    Mar 20 18:29:26 {COMPUTER NAME} identityservicesd[375]: <IMMacNotificationCenterManager: 0x7f87d510c9e0>:    NC Disabled: NO
    Mar 20 18:29:26 {COMPUTER NAME} identityservicesd[375]: <IMMacNotificationCenterManager: 0x7f87d510c9e0>:   DND Enabled: YES
    Mar 20 18:29:26 {COMPUTER NAME} identityservicesd[375]: <IMMacNotificationCenterManager: 0x7f87d510c9e0>: Updating enabled: NO   (Topics: (null))
    Mar 20 18:29:26 {COMPUTER NAME} WindowServer[218]: device_generate_desktop_screenshot: authw 0x7fba81c2e940(2000), shield 0x7fba81c35bd0(2001)
    Mar 20 18:29:27 --- last message repeated 1 time ---
    Mar 20 18:29:27 {COMPUTER NAME} WindowServer[218]: device_generate_lock_screen_screenshot: authw 0x7fba81c2e940(2000)[0, 0, 1920, 1080] shield 0x7fba81c35bd0(2001), dev [1920,1080]
    Mar 20 18:29:27 {COMPUTER NAME} com.apple.xpc.launchd[1] (com.apple.xpc.launchd.domain.user.502): Service "com.apple.xpc.launchd.unmanaged.loginwindow.72" tried to hijack endpoint "com.apple.tsm.uiserver" from owner: com.apple.SystemUIServer.agent
    Mar 20 18:29:30 --- last message repeated 1 time ---
    Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: PM response took 4741 ms (30, powerd)
    Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: ARPT: 1632.007298: AirPort_Brcm43xx::powerChange: System Sleep
    Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: ARPT: 1632.007302: wl0: powerChange: *** BONJOUR/MDNS OFFLOADS ARE NOT RUNNING.
    Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: [0x1b014fb000, 0x19000000]
    Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: [0xd8ec7000, 0x19000000]
    Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: [0x1369ac0000, 0xe000000]
    Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: [0x0, 0x0]
    Mar 20 18:29:31 {COMPUTER NAME} kernel[0]: hibernate image path: /var/vm/sleepimage
    And when I wake it up by repeatedly pressing the power button:
    Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: hibernate_newruntime_map time: 0 ms, IOHibernatePollerOpen(), ml_get_interrupts_enabled 0
    Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: IOHibernatePollerOpen(0) 19 ms
    Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: hibernate_machine_init reading
    Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: PMStats: Hibernate read took 355 ms
    Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: hibernate_machine_init pagesDone 212628 sum2 2c66736a, time: 355 ms, disk(0x20000) 447 Mb/s, comp bytes: 57749504 time: 55 ms 985 Mb/s, crypt bytes: 157388800 time: 67 ms 2228 Mb/s
    Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: Wake reason: EC.PowerButton (User)
    Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: vm_compressor_fastwake_warmup (7450 - 12878) - starting
    Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: Previous sleep cause: -60
    Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: Previous shutdown cause: 5
    Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: AppleThunderboltNHIType2::prePCIWake - power up complete - took 0 us

    This happened again at about 31% power, again unplugged.   Previously, I had plugged in the power before pressing the power button, but this time I pressed the power button before plugging in.  The display showed me the out of power icon.  Only on plugging it back in was I able to power up the laptop again.
    Is it possible there's a bug either with the displayed power or how remaining power is detected?

Maybe you are looking for

  • IMovie '09 (with OS 10.6.8) Keeps Crashing When Pressing "T"ext Button...Please Help!

    Hey folks, Been reading a lot of old threads about this issue presenting itself in previous OS versions, and the recommended solution was to upgrade to 10.6.4 at that time.  Well here we are in 10.6.8, and the issue is happening to us frequently.  We

  • How do I transfer contacts from my lost phone(note3) to my new temp phone(droid mini) when I had backup assistant on old phone?

    I had backup assistant on my Note 3 and could view the contacts online inbetween phones. Now after getting a different phone after I lost my Note 3 I can not even view my old contacts online.

  • How to use GSS and JAAS with kerberos

    Hi, I am new to this subject, I have setup a kerberos server on win 2000, and i have registered my other servers to it, this setup works fine , now what i have to do is the following 1, Display a HTML page where i will take the user id and password f

  • A "Switcher" question

    Hi all, I've come to my wit's end with Windows and I will be receiving my Mac Pro this Friday. My question to the forum is I have two WD 320 GB HDs that I wish to install into my new machine (maybe not right away since I have to learn the new OS) and

  • 1099 report

    HI Gurus, pleae advise I ran the 1099 report..S_P00_07000134. I gave me the withholding tax for 2007 invoices-payments. It doesnt give me the invoices posted in 2007 but paid in 2008, Please advise as where to get this information Thanks in advance M