Macbook Pro 13.3 not getting 300mbps wireless
Hi,
I want to see if anyone else is getting the same issues as me. I have a 2010 Macbook pro 13 with the Broadcom 802.11a/b/g/n wireless card.
My problem is that I have Wireless N router that uses the 5Ghz range and other devices getting the full 300mbps Link Speed but my Macbook is only getting 144mbps at the most.
I checked this by opening up the Network Utility from the Utilities folder and selected my wireless card from the drop down box. Is anyone else experiencing this with the 13.3 inch macbook ?
I have contacted Apple support but they were very dismissive of it and blamed my router. Do I have a faulty Mac?
i'm not using an Airport base station so when I open the app I cant make changes to any settings.
The router I am using is only set at 5ghz with the 2.4 switched off so it must be using that band for the connection. Thanks for the suggestion though.
Similar Messages
-
about a year ago we purchased a used macbook pro and can not get music to transfer from iPhones to mac
how can i get All music transferred? even non purchased
-
Macbook pro storage do not get smaller after cleaning up photos in new photos app
Macbook pro storage do not get smaller after cleaning up photos in new photos app.
How can I delete photos? are they hidden somwhere?Yes, trash is empty. And in photos libary I only have 1800 items. Also I havent got so much movies.
-
I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?
You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page. -
My MacBook Pro persistently will not connect to my MiFi Verizon wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?
Hi there terri900!
You may want to try configuring your router settings to match the recommended settings for iOS and OS X devices, which can be found here:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
You may also find some helpful information for troubleshooting this issue in this article, which can help you with any manner of issues with Wi-Fi connections:
Wi-Fi Quick Assist
http://support.apple.com/kb/HT1145
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
I am unable to redownload OS X Mavericks on a Late 2013 new Macbook Pro 13". I get a message saying "We could not complete your purchase" " OS X Mavericks can not be installed on this computer"
I nee an easy way to resolve this with Apple.why is it this problematic to resolve?! obviously there's a valid installer image for our macs, why can we not have access to it to use on our laptops?
I do not understand, nor accept the explanation given before - about it being a newer model... it doesn't make sense... how does that translate to "no download available".
also, if it was a valid point - we would have had that download with the release of 10.9.1 - which we don't. -
Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule. I am getting on error "The backup disk image “/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle” could not be created (error 17). Help!
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the page that opens.
Select the System keychain in the list of keychains in the sidebar of the window. If you don't see the list, click the down-arrow icon below the sidebar.
Then select Passwords in the Category list at lower left. Click the Kind heading in the list of keychain items to arrange it by Kind.
Locate the AirPort Disk Password with the name of your Time Capsule. Double-click the item and check the box marked Show Password in the inspector window that opens. You'll be prompted for the administrator login password. Make a note of the AirPort password, then close the inspector window and delete the item.
Also delete any other AirPort DIsk Password items for that same Time Capsule, which may have had a different name in the past.
Quit Keychain Access and try again to back up. -
I have airport express but it is not recognised by either my macbook pro or my ipod on my wireless network. It does not show in airport utility. Might I not have an airport card? How would I know. Airport utility in my mac says no other devices connected.
I have airport express but it is not recognised by either my macbook pro or my ipod on my wireless network. It does not show in airport utility. Might I not have an airport card?
If both your MacBook Pro and iPod are unable to "see" the Wi-Fi network provided by the AirPort Express, it is most likely NOT that you are missing an "airport card," but the Express may be the issue instead.
One quick test is to see if either device can "see" other Wi-Fi networks. If they can, then you can definately rule both of them out as the issue.
By default, the AirPort Express will broadcast an unsecured Wi-Fi network with a network name of something like: Apple Network NNNNNN. Can either device see this network? If not, then I would recommend that you perform a "factory default" reset on the Express, and then, check again. -
When trying to use my time machine got an error message "Time Machine could not complete the backup.
The backup disk image “/Volumes/ Time Capsul/ MacBook Pro.sparsebundle” could not be accessed (error -1).
Any ideas?I have not found a long-term solution (fix), but in my case the volume where the Time Machine backup should occur usually is mounted on the desktop but not as a shared volume (incidated as a drive with the people holding hands superimposed over the drive icon). If I drag the drive to the trash (unmount it), the next time Time Machine is scheduled to run, it completes successfully.
-
Macbook Pro suddenly will not connect to the internet via ethernet cable.
I know this is a long shot... but I figured I would give it a try.
My macbook pro suddenly does not connect to the internet via ethernet cable. Please bear with me, as I am not very tech-savvy - I will try my best to describe the symptoms!
I connect to the internet via ethernet (we don't have wifi). It was working before I went to work, and when I came home I suddenly couldn't get anything to work (I know everyone says this, but I truly didn't mess with anything). Internet browsers just think for awhile and then turn up the 'You are not connected to the internet' error.
I went into my network preferences and curiously, the 'Ethernet' shows a green dot and says 'connected'. However it says 'Authentication server is not responding' underneath the last part that says '802.1X: WPA: eduroam' (I think that is my user profile).
When I go into my 'security' settings I can see that my firewall is off, so that shouldn't be causing any problems.
I've tried restarting the router and computer itself many times. Diagnostics just gets to a certain point and reports back 'Network Diagnostics cannot fix the current networking problems.' I've also tried switching to a different ethernet cable, and I tried both cables out on a PC laptop and it connected without issue. Additionally, I brought my macbook along to a friend's house and it connected to his wifi just fine, so the problem appears to just be with ethernet connections.
I know it's hard to troubleshoot this kind of thing without being there and having a look at the computer yourself, but any tips wouild be greatly appreciated.As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues. -
Is my Macbook Pro the only one with lousy wireless reception/coverage
Hi,
I was expecting great things when i received my Macbook Pro last week. I was also prepared to go through a lot of testing for sound issues and heat, as i've read from so many other posts (my MBP seem to have none of these issues in any major way).
I used to work on my Powerbook G4 from 2005 which had a decent wireless reception (even compared to my wife's ibook G4).
But this macbook has the worst wireless reception i've ever seen! When running istumbler on both machines (PB, and MBP) and placing them side-by-side i'm getting a major difference in signal strength.
This is also basically what i see everywhere else with this MBP.
At the same time the MBP has problems connecting to Closed networks (airport extreme AP) and apparantly also lots of other wireless issues with authentication.
Am i the only experiencing this ?
Best Regards,
Lasse,
MBP 2.16, Powerbook G4, Ibook G4, Ibook G3 Mac OS X (10.4.6)
Powerbook G4, Tiger Mac OS X (10.4.2)I'm curious, when did you get your MBP and what is the serial number of your MBP?
Thanks
i read early on that with the new antenna placement
and whatnot that the macbook pro was going to get far
better reception than the older powerbooks. this may
be true, because i've seen some powerbooks get bad
wireless reception, but my macbook pro gets about the
same reception as my iBook G4. which is pretty good,
so i'm not complaining ... i just think the "better
wireless reception" was overhyped. as far as
connection issues and dropping connections, etc.,
i've had no problems so far, and i regularly use my
MBP in 5 different open and closed wireless networks
with different levels of security. -
My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection
As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues. -
Can not start up on my Macbook pro. All I get is a grey spinning wheel. Tried all the Startup key combinations and nothing works. I reset the NVRAM and nothing. I booted with start up disk , ran disk repair and all is ok. Tried to re-install OS but when I get to designating drive its blank. When I go to startup disk there is a "?" mark. When I restart under startup disk search for a drive it still comes up with nothing. Before I got the grey spinning wheel I had a locked screen. Could not move curser or click on anything. Finally just shut down. Thank you in advance for any help!
Shouldn't still have a 'beachballing'... if the drive is being found and the system is trying to boot from it but is having problems, I would suggest looking over ds store's user tip - Step by step to fix your Mac.
It's likely either something corrupt in your system files or a failing hard drive. But follow ds's steps until you find the cause of the problem.
Good luck,
Clinton -
I have a MacBook Pro that will not boot up. The apple symbol is there and the spinning wheel keeps spinning. Any idea how I can fix this?
Reinstall OS X.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
OR
Reinstall Snow Leopard without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/. -
I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7). What is the problem?
You haven't identified the version so I can't tell if offering you contact options for Adobe Support will be of use to you. But they will likely be your only hope of getting resolution unless you just happen to be using the wrong number as the serial number.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Maybe you are looking for
-
Can I download to a memory stick
Can I down load from my iPod to a thum drive
-
What is the process code for Message type FUNDMA
Hi, I am sending CO elements to the distributed server using ALE. Can somebody tell me what is the process code for the message type FUNDMA? Thanks William
-
please give this awsome app more by providing features:: 1. thumbnails for pages , 2. ability to annotaions( highlighter and underliner) to remain enabled once selected ( because many times it becomes hectic to select again and again the same ann
-
Please help....I have an SSIS package that was scheduled an have been running for awhile. This package stopped executing. The error message I get is: Message Executed as user: DWPRODDB2\SYSTEM. Microsoft (R) SQL Server Execute Package Utility Vers
-
Is anyone having trouble with airplay mirroring after the 5.2 update?
I just updated my apple tv to 5.2 and now I experience freezing of the video after awhile. I can watch streaming content and then the video will stop but audio continues. I'm using an imac with mountain lion and i use a dual band n router.