Macbook pro 13" audio problem

Hello everyone, i'm french so excuse me for my english..
I bought a Mb pro 13" 3 weeks ago, but i didn't listen music on itunes with my hearphones (Beats by dr dre studio and Tritton ax pro in dolby 5.1 for movies..).
But today, i tried and it seems that the sound only comes out the left side of any headphones. It's very disturbing, anyone know where it can come from ?
When i use the macbook speakers there is no problem at all..
Please help me

Sorry i found the solution, it was the balance which was not in the middle..

Similar Messages

  • Macbook Pro jack Audio problem

    Hi, suddenly the audio output from the jack of my macbook pro 13" is "distorted ". everything happened from one day to another. I did not do anything special, I tried to try different audio outputs to see that it was a cable problem, but as occurs with everything that I connect I'm afraid something has happened to my mac. What should I do? Thanks!

    I found a temporary solution - killing the coreaudio process resets the audio and I'm good. But what causes it is still uncertain.

  • MacBook Pro Phantom Audio Problem - Audio decreases settings unchanged

    I'm having a very strange issue with a MacBook Pro. Over the course of a presentation the audio output will slowly decrease until it is almost inaudible. I'm running the machine into a sounds system and I can turn up the MBP volume to compensate until I hit the max, but it continues to gradually reduce.
    Could this be an overheating problem? The logic board on this machine was just replaced due to an issue where the optical out would not disengage so this is a brand new (less than a week old) logic board.
    Any suggestions/solutions save having the board replaced again, or asking for a new machine?

    I appreciate your response. I still have concerns:
    The red-lite is off when my issue is happening.
    The red-lite is on when my issue is happening.
    It was not consistent. My concern is the Macintosh operating system not detecting the change. My other concern is it can _not_ be only a hardware switching issue, as Alsamixer, a software program, can make the switch toggle between off or on. If it was a hardware-only issue, Alsamixer would be a fail. And, if it is actually a hardware-only issue triggering a software 1 or 0 switch somewhere:
    My final concern is 'where is this setting being stored' as clearning PRAM and reinstalling entire operating system after opertating system (Leopard to Lion and back to Leopard) after a disk wipe has no effect.
    I guess it sounds to me, that OSX tries to be too user-friendly by not allowing peeps to change those options themselves. Is there a dscl command switch I can use to manually override such an effect? (Just in case I don't happen to have anything to stick into the mini-jack port)
    Regardless, your answer is correct. Thank you both (Ciao and Allan Jones)
    Jason

  • Logic Studio, MacBook pro, M-Audio ProFire 610, M-Audio Axiom 61

    I'm just about to get the above: Logic Studio, MacBook Pro, M-Audio ProFire 610 and the M-Audio Aziom 61, and want to know if any of the above (Logic Studio and MacBook Pro excluded) are a big mistake. I've been using an Aluminium Powerbook 17" 1.33MHz, and M-Audio MobilePre USB, and an Edirol controller, with guitar rig (and Controller), and Logic Express 7.
    I need a set-up that will work as well in the studio, as it does on stage. We tend to plug everything in to the powerbook at the moment, and use Reason to power the synths, guitar rig for the guitars and bass, and logic express plugins for vocals etc.
    Anyone have any experience with any of the above?
    Cheers,
    Adam

    Hi Zuelito,
    Please read my first paragraph again:
    "I gotta RESPECTFULLY take issue with every point you bring up about M-Audio stuff, Zuelito..."
    I'm not sure how you can be "slightly put off by the tenor" of my post given everything I said, with the one possible exception being my line about MOTU making crappy hardware - and that was based on personal experience. And while we're talking about the opinions of others, feel free to peruse the Unicornation board - it's full of MOTU users talking about firewire port failures and other hardware issues - so it appears neither of us is alone in our experiences
    Seriously, if I was in some way brash or offensive in the way my post came off, I publicly and sincerely apologize. I really try to think about what I say (and how I say it) when posting on the 'net, for this very reason. I thought I simply stated my experience in an informative manner; again, please re-read my post - I hope it comes across as intended.
    For what it's worth, I will say (even more clearly) that I've always loved MOTU products in terms of feature set; maybe that's why I've owned almost every product they've ever made! However, in my environment, I simply can't risk hardware failures, and their stuff has let me down too many times to keep rolling the dice. I will also divulge that one of their top tech support guys has acknowledged the firewire port problem. That's a shame, because they do make great stuff, conceptually. I really wish I could take a chance on that new 896mk3, but it ain't gonna happen for me; 6 dead firewire ports is enough of a failure rate for me to give up on them. To be fair, this probably isn't an issue for fixed installations, but I have to make these connections daily while on tour.
    Also, I did NOT categorically state that "M-Audio stuff is better than MOTU." Again, if you re-read my post, it should be obvious that all I'm saying is I have a newfound respect for M-Audio, as of the new ProFire series. I also said in my first paragraph that I shared your opinion of M-Audio for a long time!
    If this were all about M-Audio's 410 vs. MOTU's Ultralite (or other competition), we probably wouldn't even be having this discussion as I would have agreed with you - but the original poster specifically asked about the newer 610 with Logic, which is what I'm using on one of my rigs. I simply offered my personal experience.
    As for drivers, I've not had any problems with M-Audio or their level of support. Just the opposite - they really seem to be on the ball and are way more communicative than other mfrs. I don't know of any other mfr. that supports each OS subrelease in detail like they do, and their development speed seems as fast (if not faster) than anyone else.
    Finally, until now I've only owned a few M-Audio pieces (410, 1814), but I can state that they've been flawless. Their audio quality was not 'high end' by any stretch, but I only used them for utility purposes (writing rigs on the road, etc.). Like I said, my main studio stuff has been RME or Apogee for years, and that's the quality level I'm used to - which is why the 610 really surprised me. I also have several friends who do a LOT of touring, many of which rely on M-Audio hardware (mostly 410s). One guy's unit doesn't even have any paint left on it from road abuse - but it still works like a champ after 4 years.
    So anyway, this is all just my experience. Hope it doesn't come across as anything but that
    Peace,
    Jim

  • I am new to iMovies.  When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch.  Very annoying.  How can I fix this?

    I am new to iMovies.  When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch.  Very annoying.  How can I fix this?

    DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

  • How can I tell if the mini dvi on my 2010 13" macbook pro supports audio?

    How can I tell if the mini dvi on my 2010 13" macbook pro supports audio?

    If it's a post 2009 Mac it supports audio on the HDMI port. See:
    About Mini DisplayPort to HDMI adapters
    Mac mini (Mid 2010)- Frequently asked questions about HDMI

  • Macbook pro touchpad/curser problems.

    macbook pro touchpad curser problems.  typing randomly jumps to wherever the curser is resting at the time.  unbelievably maddening.  multiple devices same all have same problem.  hard to believe we cannot find anything on the apple site about this.  MANY complaints outside of this site on this issue... clearly a touchpad/battery design flaw being ignored by Cupertino.  during the writing of this post, the curser jumped randomly and started typing in a different location six times.  IMPOSSIBLE to use as a word processor since typing becomes quite frustrating.  HELP.  any ideas?  Fanboy and shareholder.  three macbook pros in the house...all the same problem. (please do not offer separate keyboard as solution...this is a laptop, not a Surface Pro...)

    Go step by step and test.
    1. Restart
    2. Shut down the computer.
        Clean the trackpad with moist not wet microfiber cloth.
        System Preferences > Point & Click
        Try turning off three finger dragging and then turning it on after  testing.
    3. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
      4. Reset PRAM:   http://support.apple.com/kb/PH14222
    5. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    6. Close all windows and quit all applications.
        Click the Spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
        Select Disk Utility from the drop down. When the Disk utility window opens up,
        select  Macintosh HD, then First Aid.
        Click Repair Disk Permissions button.
        Ignore the  time remaining estimate.

  • My 15" macbook pro have big problems identifying and connecting to my wireless network

    my 15" macbook pro have big problems identifying and connecting to my wireless network. I have no problem connecting to my neighbour´s. Also I have a 13" macbook pro, a 13" macbook, 2 ipads and 3 iphones (3, 4 and 5) and none of these have any problems connecting to my wireless. My 15" is running Mac OS X 10.7.5, has a 2.66 GHz Intel Core I7 proc and 8 GB Ram

    Hi Frodey,
    Thanks for using Apple Support Communities.  This article has steps to take to troubleshoot connecting to a wireless network and may help:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Cheers,
    - Ari

  • HT202730 Macbook Pro Optical Audio Output Toggles On/Off

    My Macbook Pro optical audio output seems to switch off with a loud click when sound is not playing for a few seconds.
    Then, when sound resumes, there's a delay as it switches back on.
    Is there a way to stop this toggling?
    And please don't tell me to check the connections.
    I've already tried different sample sizes and bit rates to no avail. It seems as if the system is switching something when there is no audio being played, then switching it on again. Even if the playback is only on pause.

       Reset PRAM.   http://support.apple.com/kb/PH18761
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • The Superdrive on my MacBook Pro ejects audio CDsa few seconds after they are inserted. This happens with both prerecorded CDs I have bought in music stores AND with audio CDs I have recorded myself, on the very same computer, via iTunes.

    The Superdrive on my MacBook Pro ejects audio CDs just a few seconds after inserting them. This happens both with original audio CDs I have bought in music stores AND with audio CDs I have recorded myself, on the very same computer, via iTunes. The same does NOT happen with data CDs (e.g., stuff in mp3 format), which are read just fine. This behaviour started a couple of weeks ago, until then everything had worked just fine for years. I am running iTunes 11.1 under Snow Leopard 10.6.8. Any idea?
    Fabrizio

    You could also try a SMC reset:
    Resetting the SMC (System Management Controller) on Intel-based Macs:
    http://support.apple.com/kb/ht3964  and
    http://support.apple.com/kb/HT1237?viewlocale=en_US

  • 2012 MacBook Pro Intel i7 (purchased May 2013) constantly drops airport connection. My 2006 MacBook Pro has no problems connecting and staying connected.

    I received a 2012 MacBook Pro INtel i7 for my birthday this May 2013. It constantly drops my airport connection. My ancient 2006 MacBook Pro has no problem connecting to airport, nor staying connected. I've had to write this message several times as I keep losing the airport connection and have to reconnect. BTW: I am less than five feet from the airport base.
    Thanks for help.

    After trying all of the above the suggestions, the problem returned as before. However, after digging some more I discovered that the issue appears to lie with the 10.4.10 version of the Mac OS; when I checked the software log under the system profiler I noticed that I had installed that update at about the time my Airport problems began. Apple then quietly released a v 1.1 combo update to 10.4.10 on July 2nd, which once installed appears to have resolved the problem. You can find the download at http://www.apple.com/support/downloads/macosx10410comboupdatev11intel.html
    What's curious is that originally Apple listed that the v 1.1 combo update resolved some issues with RAW image data, and some sound problems, which don't seem to have anything to do with Airport.

  • Mac Pro 2009 audio problems

    Hi there.
    I have a mac pro 2009 quad-core intel xeon and since i've updated to 10.7.3 i've started to have problems with audio.
    Sometimes when i turn on the mac, the audio doesn't work (the audio icon in the menu bar is shown grey, and if i try to rise the volume using the keyboard it doesn't work.
    I've tried to get inside the audio preferences and select a different audio output like the internal speakers (i currently have speakers connected into the jack output) but it doesn't work too.
    The only way to resolve this seems to do a RAM reset during the boot, but it's very annoying do this every time.
    Anyone can help me to resolve this? Is it a software problem? Or my logic board is going to die?
    It never did anything like this before the update.
    Thanks for the support and forgive me for my bad english.
    Greetz,
    Lorenzo

    I'm having similar problems with a brand-new Mac Pro 8-core. Mouse cuts out (I'm using a wired keyboard thankfully) and my Jawbone headset will work wonderfully with my old MacBook Pro but will only pair (maybe) on my Mac Pro.
    Called and spoke with an expert and feel I get the run around. He had me shut down and unplug everything for 30 seconds. I did it but felt he was just having me "do something" to get me off of the line.
    Apple has a problem with Bluetooth on their Mac Pros and isn't dealing with it.

  • 10.6.8 update Macbook Pro (2006) audio dropouts

    Hi, I've got this nightmare problem, since I updated to OS10.6.8, my Macbook Pro late 2006 drops the audio, randomly, rendering the whole caboodle absolutely useless as a studio tool. It still works out of the headphone output, but not with my MOTU 828, or an M-Audio FW interface I tried it with either. Seems to happenw ith Logic, iTunes, whatever.
    Has anybody else had this problem, perhaps suggest a solution? One Mac expert said he thought it was a firewire port issue, and nothing could be done without replacing the motherboard.
    There was a wierd glitch with saving/storage afer 10.6.8 upgrade, and I used this fix..http://support.apple.com/kb/TS3968
    Don't know if that could have affected anything..
    Thankyou Mac world people.

    Did you follow these steps, EXACTLY?
    http://support.apple.com/kb/ht3964
    Note: Learn about removing the battery on MacBook and MacBook Pro.
    Shut down the computer.
    Disconnect the MagSafe power adapter from the computer, if it's connected.
    Remove the battery.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Reconnect the battery and MagSafe power adapter.
    Press the power button to turn on the computer.

  • Macbook Pro Beach Ball Problems

    I have a '08 MBP that has the spinning beach ball showing up in all the apps during use and everything runs slower.
    Web pages take 5-10 seconds to load.
    Lightroom photos take 5-10 seconds to load. Commands and mouse selections take 4-5 seconds to respond.
    It slows down even more with an external monitor being used.
    The fan runs high 85% of the time.
    Hard drive was replaced with an SSD about 2 years ago, which helped calm HD noise.
    The HD has 15.5 GB left right now, but the beach ball problem has been there even with half the HD full.
    Problem has been going on for a couple of years, but I've managed around it.
    This issue occurs even with only 1 app running. For instance, I'll shut all apps except one application, and it still drags, whether that one app be Safari or LR.
    I realize the MBP is older, but it used to be very responsive with the same apps. Never used to see the beach ball during app usage, only at startup of app if anytime.
    I believe the RAM is maxed out for what this machine can handle at 4GB, but again, the system didn't slow down before.
    I believe the problem may be some processes running in the background that are dragging down everything, but not sure what to look for.
    Any advice any fixes are greatly appreciated.
    Here is the EtreCheck:
    Hardware Information: ?
      MacBook Pro (15-inch  2.4/2.2GHz) (Verified)
      MacBook Pro - model: MacBookPro3,1
      1 2.2 GHz Intel Core 2 Duo CPU: 2 cores
      4 GB RAM
    Video Information: ?
      GeForce 8600M GT     - VRAM: 128 MB
      Color LCD 1440 x 900
      Cinema HD 2560 x 1600
    System Software: ?
      OS X 10.9.4 (13E28) - Uptime: 0 days 21:27:44
    Disk Information: ?
      SAMSUNG SSD 830 Series disk0 : (256.06 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 255.2 GB (15.5 GB free) (Low!)
      Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information: ?
      Apple Inc. Built-in iSight
      X-Rite, Inc. i1Display3
      Logitech USB Receiver
      Apple Computer, Inc. Apple Cinema HD Display
      Seagate Backup+ Desk 3 TB
      S.M.A.R.T. Status: Verified
      disk1s1 (disk1s1) <not mounted>: 262 KB
      3 Seagate (disk1s3) /Volumes/3 Seagate: 3 TB (2.04 TB free)
      Apple Computer Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
      Apple Inc. Bluetooth USB Host Controller
    Gatekeeper: ?
      Mac App Store and identified developers
    Kernel Extensions: ?
      [not loaded] au.com.glassechidna.heimdall_usb_shield (6.0) Support
      [loaded] com.aladdin.kext.aksfridge (1.0.2) Support
      [not loaded] com.devguru.driver.SamsungACMControl (1.4.20 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungACMData (1.4.20 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungComposite (1.4.20 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungMTP (1.4.20 - SDK 10.5) Support
      [not loaded] com.devguru.driver.SamsungSerial (1.4.20 - SDK 10.6) Support
      [not loaded] com.jft.driver.PdaNetDrv (1.0.0d1) Support
      [loaded] com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) Support
      [not loaded] com.roxio.BluRaySupport (1.1.6) Support
      [not loaded] com.roxio.TDIXController (2.0) Support
      [not loaded] com.sandisk.driver.com_sandisk_SanDiskImageMate (1.0.17) Support
      [not loaded] xxx.qnation.PeerGuardian (1.1.9) Support
    Startup Items: ?
      HP IO: Path: /Library/StartupItems/HP IO
    Problem System Launch Daemons: ?
      [failed] com.apple.Kerberos.digest-service.plist
      [failed] com.apple.Kerberos.kdc.plist
    Launch Daemons: ?
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.adobe.SwitchBoard.plist Support
      [running] com.aladdin.aksusbd.plist Support
      [running] com.aladdin.hasplmd.plist Support
      [loaded] com.bombich.ccc.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [not loaded] com.logmein.logmeinblanker.plist Support
      [running] com.logmein.logmeinserver.plist Support
      [loaded] com.logmein.raupdate.plist Support
      [not loaded] com.palm.novacomd Support
      [failed] com.tvmobili.tvmobilisvcd.plist Support
      [running] com.xrite.device.xrdd.plist Support
      [failed] xxx.qnation.PeerGuardian.kextload.plist Support
    Launch Agents: ?
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [failed] com.logmein.LMILaunchAgentFixer.plist Support
      [running] com.logmein.logmeingui.plist Support
      [running] com.logmein.logmeinguiagent.plist Support
      [not loaded] com.logmein.logmeinguiagentatlogin.plist Support
      [running] com.sandisk.SanDiskImageMate.plist Support
      [failed] com.tvmobili.artwork.plist Support
      [loaded] com.xrite.device.softwareupdate.plist Support
    User Launch Agents: ?
      [loaded] com.adobe.ARM.[...].plist Support
    User Login Items: ?
      Scroll Reverser
      iTunesHelper
      iTunesHelper
      LMILaunchAgentFixer
      Connect360Helper
      PdaNetMac
      Music Manager
      Canon IJ Network Scanner Selector2
      Dropbox
      Android File Transfer Agent
      i1ProfilerTray
      fuspredownloader
      KiesAgent
      HP Scheduler
    Internet Plug-ins: ?
      AdobePDFViewerNPAPI: Version: 10.1.10 Support
      Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
      EPPEX Plugin: Version: 3.0.5.0 Support
      AdobePDFViewer: Version: 10.1.10 Support
      LogMeInSafari32: Version: 1.0.935 - SDK 10.7 Support
      googletalkbrowserplugin: Version: 5.4.2.18903 Support
      iPhotoPhotocast: Version: 7.0
      QuickTime Plugin: Version: 7.7.3
      FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
      DivXBrowserPlugin: Version: 2.0 Support
      CouponPrinter-FireFox: Version: Version 1.1.5
      LogMeIn: Version: 1.0.935 - SDK 10.7 Support
      Silverlight: Version: 4.0.50524.0 Support
      Google Earth Web Plug-in: Version: 7.1 Support
      AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 2.3.2.6 Support
      o1dbrowserplugin: Version: 5.4.2.18903 Support
      JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
      OfficeLiveBrowserPlugin: Version: 12.3.6 Support
    Safari Extensions: ?
      feedly-2
      Greenhouse
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User iTunes Plug-ins ?
      TuneUp Visualizer: Version: 2.2.0 Support
    User Internet Plug-ins ?
      fbplugin_1_0_3: Version: (null) Support
      Move-Media-Player: Version: npmnqmp 071505000006 Support
      BrowserPlus_2.8.1: Version: 2.8.1 Support
      CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
      Picasa: Version: 1.0 Support
    3rd Party Preference Panes: ?
      BrowserPlus  Support
      Connect360  Support
      DivX  Support
      Flash Player  Support
      Flip4Mac WMV  Support
      MacFUSE  Support
      MusicManager  Support
      Perian  Support
    Time Machine: ?
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 237.67 GB Disk used: 223.24 GB
      Destinations:
      Seagate Backup Plus [Local] (Last used)
      Total size: 3 TB
      Total number of backups: 42
      Oldest backup: 2012-11-15 08:13:19 +0000
      Last backup: 2014-09-01 15:11:17 +0000
      Size of backup disk: Excellent
      Backup size 3 TB > (Disk size 237.67 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU: ?
          11% WindowServer
          1% AdobeCrashDaemon
          0% i1ProfilerTray
          0% xrdd
          0% fontd
    Top Processes by Memory: ?
      500 MB Adobe Photoshop Lightroom 4
      123 MB com.apple.WebKit.WebContent
      102 MB Safari
      82 MB Finder
      70 MB WindowServer
    Virtual Memory Information: ?
      709 MB Free RAM
      1.70 GB Active RAM
      714 MB Inactive RAM
      636 MB Wired RAM
      1.79 GB Page-ins
      28 MB Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Macbook Pro to HDtv problems

    Hi,
    I have a macbook pro from 2009 (1st aluminum body). I recently got a samsung HDTV, and when I hook it up to my macbook, sometimes certain programs come up in a distored, unviewable form. It is hard to describe, it looks sort of like a photo negative, with random rainbow colours throughout.
    if I close the program (eg firefox) and reopen it on the hdtv with a wireless mouse, then it always works. But if I have the program open first, and then plug it in and try and full screen netflix, it gets all messed up.
    I did cheap out on my hdmi adapter, and my hdmi cable. I'm not sure if either of these would have anything to do with it. Help!

    Hi
    I've done the same thing, with no problems - the tv audio input selector setting needed adjusting, but otherwise fine. Some tv's are less than obvious how to have the audio input independent of the hdmi.

Maybe you are looking for