Macbook Pro 13" for editing RAW photos on Aperture?

My Macbook Pro 15" 2011 was stolen and I planned to replace it with the MacBook Pro 13" retina (like the size) - but then discovered that the graphics card was not the same.  I edit my RAW photos on Aperture.  Will I be doing the waiting game with a 13" or should I stick to the 15"?

Thanks for the reply
Know that I won't get same performance as 15".  i have an imac (2008) and find the processing of the RAW photos way too slow depsite upgrading the machine.   It works..... but I have to wait for processing.
Have you worked with aperture in RAW on 13" retina - will I spend time watching the "spinning wheel" as it processes photos when doing lots of editing? 
I was planning to buy to top of range retina 13"  - budget will only go to mid range retina 15".   Non retina macbook are not available new in South Africa any longer.

Similar Messages

  • Best Macbook Pro 15" for photo editing?

    Hi,
    I have to get a MacBook Pro 15" for my work. I'm a photographer, so I will be editing a lot of images with Photoshop, Aperture, plug-ins, etc. + I will connect a large external monitor to it.
    I will also have to edit some videos in FCP but not much, and recording some audio using Logic.
    My two choices are: MacBook Pro 2.4 GHz (i5) or 2.66 GHz (i7). From what I understood the 2.53 GHz (i5) is not really worthed, since there is almost no difference with the 2.4 GHz.
    I was wondering if in your opinion the better graphics of the 2.66 GHz could make a big difference to me.
    I don't play any games on my mac.
    Thank you so much for your advises
    Have a good day
    Luca

    I think you will find the only difference with the Nvidia graphic card between the i5 and i7 is the i5 have 256mb less dedicate vedio RAM than the i7 model. This mades no difference for the tasks you listed.
    Both i5 and i7 can display resolution upto 2560 X 1600, so you can connect it to a 30 inch monitor without any problem.
    I agree with you the 2.4Ghz model is a good choice, you can use the rest of the money for 6 to 8Gb of RAM upgrade.
    The i7 in my MBP only get pushed to the limit when I test software in multiple vitural windows. Most time incl working in Photoshop CS4 in virtual Windows 7, the cpu only operate around 30%. So I don’t think you will notice any performance difference with the 2.4Ghz model.

  • If i edit a photo in iPhoto on an ipad will iPhoto on my macbook pro have the edited version as well

    If i edit a photo on iphoto on my ipad and then conect it to my laptop will it
    save the changes i made the photos on the ipad or will it revert them to
    the original version which is the verion they are on the macbook pro?

    iPhoto on the iPad and on your Mac ar completely different programs. They do not sync in both directions.
    If i edit a photo on iphoto on my ipad and then conect it to my laptop will it
    save the changes i made the photos on the ipad or will it revert them to
    the original version which is the verion they are on the macbook pro?
    When you upload photos to your iPad bysyncing albums and events to it using iTunes, and then edit some photos, and connect the iPad again and sync again, then the synced albums will be replaced on the iPad by the new set of albums. The changes will not sync back to iPhoto on your Mac.
    If you want the edited image to appear on your mac, savea new copy to the camera roll and then connect the iPad to your Mac. Import selected photos from the camera rolll to iPhoto.
    Regards
    Léonie

  • I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? Thanks

    I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? I have tried to shut my laptop off and let it rest and I have also re-started my wifi router three different times. Someone please help me with this problem so I can begin to use my laptop again as I take it to school and use it for class.
    Thanks so much!

    FCP, and all software on OSX, has a few different "preference" files (the extension is .plist), which store all your user settings. Each time you resize a window, change a setting, anything, this file is re-written. Kinda easy to see how they would become corrupt every now and then.
    -Close FCP
    -Navigate to User>Library>Preferences and delete com.apple.FinalCutPro.plist
    -Navigate to User>Library>Preferences>Final Cut Pro User Data and delete Final Cut Pro 5.0 Prefs
    -Empty your trash
    Relaunch FCP and see if that worked.
    Download FCP Rescue to make this process easier in the future. When you have FCP running really smooth, open FCP Rescue and create a backup of your preference files. If it starts acting wanky, just run FCP Rescue and Restore your backup preferences. Works really slick, and it's free.
    EDIT: Or use the really simple explaination that X posted as I was typing.

  • Editing raw photos in CS4 and returning to a specific event in Iphoto '09

    I wish to edit raw photos in CS4. I have set CS4 as my preferred editor in preferences. When I am finished editing in CS4, I wish to to return the edited photo to the same event from which it came. How do I do this without saving the photo to the desktop (or where ever) and then importing to Iphoto and then dragging to the appropriate event. Please be specific.

    I don't use CS4, but I may be able to help. I also shoot in RAW and use iPhoto and I use NX2 as my external editor. Here's how I do what you're asking about.
    (1) In iPhoto->Preferences: select send RAW to external editor.
    (2) In iPhoto->Preferences: select Capture NX2 as external editor.
    (3) Import all RAW photos into iPhoto.
    (4) Double click on a photo to send it to NX2. (iPhoto sends a link to the original RAW file in this step.)
    (5) Make any desired edits in NX2.
    (6) in NX2 select "save". This overwites the original RAW file in iPhoto's library.
    (7) in NX2 select "save as JPEG". Navigate to the iPhoto "modified" directory and overwrite the existing JPEG (The one that iPhoto made when it initially processed your RAW file). You should always get and overwrite warning at this point. It means your in the right place!
    All done. After this iPhoto automatically updates the corresponding thumbnail to match. At this point, you modified RAW file and it corresponding JPEG are both stored in iPhoto. I can't think of any reason why this wouldn't also work with CS4.
    If at any point you'd like to go back to the RAW file and edit it some more simply select "reprocess raw" or "revert to original" in iPhoto.
    In order to be able to navigate into the iPhoto library you first need to make an alias to it by right click and "create alias". Then just place this alias anywhere you like. Browse here in Step 7.
    This solution is not for everyone. If you mess up and save your JPEG in the wrong place you may get unexpected results from iPhoto because it's library is not supposed to be messed with by users. But if you are careful you will be fine. It all depends on how comfortable you are with computers. The choice and risk is up to you. I just wanted to make sure you knew a solution existed.

  • Cannot edit raw photo from lightroom 5.5 in photoshop cs 6 i have camera raw 8.5 installed.

    Cannot edit raw photo from Lightroom 5.5 in Photoshop CS 6 I have camera raw 8.5 installed.

    Sorry for getting back to you this late but I figured out the problem was
    not with Photoshop but with the file itself.  I created a new file file and
    was able to edit it in Photoshop from Lightroom.  Thanks again for your
    response to help resolve the problem.
    Steve Lerwill

  • I have a MacBook Pro late 2008 edition with 2 Gigs of RAM and running Mavericks. When trying to download Yosemite from the App Store it gives me an error message. Anyone has a similar problem?

    MacBook Pro late 2008 edition with 2 Gigs of RAM and running Mavericks (10.9.5). It gives me an error message when I try to download Yosemite

    All,
    I thought it may be related to spaces in the path in which the script was called from. I tried having the ODBC command script in another directory but the same thing happens. It will give me the "CONFIGSYSDSN: Unable to create a data source for the 'Oracle in OraClient10g_home1' driver: Could not load the setup or translator library with error code -2147467259". As soon as the script is done running I can manually double click the script and it adds the DSN fine.
    Thanks,
    Clif Bridegum

  • Patch for editing raw images in pse8 wouldn't download . please help!

    I want to edit raw photos in pse, and downloaded the patch from adobe, but when i went to 'unzip' it, the 'unzipper'--not real tech savvy here, sorry-- said not all files could be extracted. What? Do you think it could be what i'm extracting with? Thanks for your help.

    me again
    i get a message that says
    'error loading updater workflow'
    i am using the adobe application extractor to unzip files. can i use something esle perhaps?

  • Editing RAW photos from the Nikon D7100

    What software would you recommend using to edit RAW photos from the Nikon D7100?
    Thanks for your help!
    Jake

    Camera
    Raw image filename extension
    Minimum Camera Raw plug-in version required
    Minimum Lightroom version required
    Nikon
    D7100
    NEF
    7.4
    4.4

  • Questions regarding hard disk replacement in MacBook Pro Early 2008 Edition

    Hello -
    You folks probably get this a lot but I have a MacBook Pro Early 2008 edition and would like to upgrade the base 200 GB 5400 RPM drive to a Seagate Momentus 7200.4 drive. I have a few questions regarding this, and would appreciate any feedback.
    1) Does anybody know if installing a new hard drive in a MacBook Pro would cause the warranty to be invalidated? I don't believe a hard drive is considered a user replaceable part, at least from what I read, and I would like to know if replacing it myself would void AppleCare.
    2) Does anybody have any experience with the Segate Montentus 7200.4? I'm interested in how reliable the drive is and how much heat it generates. I've quickly discovered that I can use my MacBook Pro as an oven in tight spots and would like to prevent it from cooking its own internals.
    3 random) Does anybody know at what temperature the system actually overheats? I'm seeing 171 F and this is with smcFanControl turned up to the Higher RPM mode. I'm a little nervous when I'm running WoW and the system is averaging above 170 with smcFanControl totally cranked up to 6000 rpm.
    Thanks everyone!

    Thanks for that. I've had mixed results with both Seagate and WD, but less issues historically with WD. My experience with IBM/Hitachi makes is nearly impossible to recommend their products, so based on what I'm seeing the Western Digital Scorpio Black looks like the best bet. Do you happen to know if Apple will do hardware installations outside of warranty repair scenario's? Ripping open my only notebook to perform "involved" hardware maintenance is not something I'd prefer to do, even with my technical background.

  • I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note.  I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds.  I can't get rid of it.  I have

    I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note.  I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds.  I can't get rid of it.  I have tried to clear out the iMessage settings I had put in, and I've tried to adjust the Accounts to not include notes to synch.  But, Notes will not stop.  It opens a new note, and even if you ignore it, it assumes preference every 5 seconds, and the Mac is impossible to use.

    Do you have any Boot Camp or other secondary partitions set up on your system? If so then try running a disk verification routine (chkdsk, etc.) in Windows to repair the disk. While I've not heard of it happening recently, in the past errors in these partitions have resulted in stubborn ghost files appearing in OS X.

  • Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive

    Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive.
    Tried to reset pram, smc, nvram.
    Tried installing new RAM.
    Tried installing new hard drive.
    You should know that my internal drive is installed in a cheap external case and plugged in a USB 2.0 port because i am waiting for a new hard drive cable.all
    Yep all good things happened to me...i don't know if all these problems are linked, ahh and also my trackpad is behaving very erraticaly sometimes, it's like it is possessed by a ghost. My computer is not under warranty anymore so i'd like to avoid a trip to the Apple store but i'm close to doing just that.
    Any help appreciated...

    It's diagnostic software. It's supposed to help you find problems. I don't think anyone is making any software yet that fixes hardware problems.
    That said, the two comments:
    Le husky wrote:
    Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive....
    .....also my trackpad is behaving very erraticaly sometimes, it's like it is possessed by a ghost....
    would lead me to think it's the logic board. On older MacBook Pro's both the USB I/O ports and the keyboard/trackpad are fed out of an integrated USB controller integrated into the South Bridge I/O controller. On newer models, the USB ports come out of an integrated North/South bridge controller and the keyboard/trackpad are handled by an SMC controller, which itself interfaces with the I/O controller. All of these items are on the logic board, and they're all unrepairable.
    ...unless of course the "internal drive [that] is installed in a cheap external case" is itself causing the problems. Another thing to try might be a different USB port, if you haven't done so already.
    I didn't know the price for Scannerz went up. I could have sworn I only paid 30-some bucks for it. Maybe it was on sale at the time. I don't remember.
    In any case, good luck.

  • Is there an easy way to securely delete everything on my macbook PRO except for the OS and applications?  Giving my old Macbook to a family member.

    Is there an eay way to securely erase all information on my macbook Pro except for the OS and applicatios?  I'm donating my computer but want to eliiminate my files and info.

    Yes, boot to your install disk (start up while holding C key).  Go to Utilities>Disk Utility.  Choose erase and format your disk (make sure it's formatted as Mac OSX extended journaled).  There's is a button for security options.  Choose the 0 option (don't choose the multiple pass versions, or it will take forever, but that's extra security).  The 0 option writes a 0 in every location on the drive, and it takes a few hours.  It would take CIA or highly skilled hacker abilities to dig out any information.
    Once you wipe the disc, reinstall OSX.  You're done.

  • HT201250 which external hard drive should I choose/use as I am setting up Time Machine on my MacBook Pro 15 for the very first time?

    Which external hard drive should I use/choose as I am setting up Time Machine on my MacBook Pro 15 for the very first time?

    Any of these SATA HDDs that are at least the same size as your internal HDD (preferably larger capacity).  In addition you will need an enclosure, preferably one with a Firewire as well as a USB connection.
    http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    Ciao.

  • How to transfer the content of the video to Adobe Premiere Pro CS3 for editing ?

    Hi there,
    I have an old video camera that is still working. That video camera uses a Hi 8 tape. The tape is bigger that the current DV tape. The size of the tape is something like a tape cassette.
    How to transfer the content of the video to Adobe Premiere Pro CS3 for editing ? Being an old video camera, the output doesn't have any firewire or USB connector. In fact the only output is has is the Yellow, Red & while connector (is this referred to as composite).
    So, how do I input this Yellow, Red & White cable into the PC (or rather into Adobe Pro CS3) ?
    Any established hardware/convertor to recommend ?
    Thanks

    Ryan,
    For "composite out," only you will need an A-D "bridge" to Capture from that camera. Grass Valley/Canopus offers two really good ones, the ADVC-110 and the ADVC-300. There are others and also PCI A-D capture cards, but the Canopus units get very good reviews.
    One other workflow would be to hook your older camera to a digital video camera with passthrough (not all have this and it is being discontinued fairly rapidly in consumer cameras) and then doing the Capture through that digital video camera via FireWire. You will not have Device Control, but can easily start/stop via the mouse and one hand on the switches, or on a remote.
    Good luck,
    Hunt

Maybe you are looking for