MacBook Pro ~ 13 inch Intel Core i5 Battery is not charging and it is plugged in

Hi Everyone!
I bought this MacBook Pro 13 inch, Intel Core i5 in June 2011 and it is Early 2011 model and today I am charging my battery and it plugged in and it wont charge. I have had it where the screen goes black and the plug wont show a light and it wont charge. The condition of the battery is Replace Soon. I dont know what it is.
Please Help. Thank you!

'Replace Battery" means you need a  new battery.
Take it to the Apple store as soon as possible.
Mac is in limited warranty for 1 year from the date of purchase.
If the battery is found to be defective, it will be replaced free while Mac is in warranty.
Take the Mac to the Apple store.

Similar Messages

  • I have MacBook Pro 2.2GHz Intel Core i7 (15-inch DDR3) Early-2011 and I want to upgrade RAM, What is the MAX RAM can I get it 8GB or 16GB?

    I have MacBook Pro 2.2GHz Intel Core i7 (15-inch DDR3) Early-2011 and I want to upgrade RAM, What is the MAX RAM can I get it 8GB or 16GB?

    Maximum Memory     16 GB (Actual) 8 GB (Apple)
    Memory Slots     2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

  • Apple MacBook Pro 2.33GHz Intel Core 2 Duo (17-inch): Maximum momory?

    Hi,
    There are confusing posts on the maximum memory I can put on Apple MacBook Pro 2.33GHz Intel Core 2 Duo (17-inch). Is it 3GB or 8GB?
    Thanks in advance,
    YD

    Apple says 3GB's, but you can run a max of 4GB's, although only about 3.3GB's will be able to addressed by your system. However, you'll get better performance by running matched pairs, so upgrade to 4GB's.

  • Friends, MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011)   New MB Pro with OSX 10.6 – current on all updates.  I successfully installed rEFit. I used Boot Camp to install Win 7.  All was great.  Then installed debian 6.  Somehow after the debian i

    MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New with OSX 10.6 – current on all updates.
    I successfully installed rEFit. I used Boot Camp to install Win 7.  All was great.
    Then installed debian 6.  Somehow after the debian install and restart (I know this sounds crazy) but I am now reduced to Win 7 only. rEFit is not present when rebooting nor is OSX or debian. Further, I am unable to force the install DVD to launch when rebooting, by holding C, D or F8.  The Option key brings me to the grey screen with a padlock. I have attempted the root and local pw- no go. Restart holding D takes me to the windows boot manager. I have attempted several options within the Advanced Options; including – Repair Your computer, safe mode and “last known good config,” All of which did nothing.
    I can see all my OSX files within win7. I tried to install the OSX within windows. Ya right, that did nothing..
    I only desire to get back to OSX...
    What are my options??

    Yes, you royally hosed up your machine.
    You should first try to get your files off, any way you can to a external drive.
    Your going to need to hold c and boot from the disk that came with your computer and a couple of screens in under the menu is a option for Disk Utility.
    Select your drive and Erase with Security Option Zero, format the drive HFS+ Journaled and when that's finished (about a hour or so) then quit and install OS X from the installer.
    I hope this works, but I suspect it won't. Others have hosed their machines trying to use a Linux disk without proper partition formatting too.
    Another option might be to use another Mac to c boot off the Snow Leopard disk and install OS X onto a external drive, take that to the problem Mac and try holding option and booting off of it to erase your internal drive.
    You could replace the drive.
    frederick s wrote:
     The Option key brings me to the grey screen with a padlock.
    Is this holding option while booting?
    There was someone else around here who hosed their Mac with a Linux disk too. Try to find it.

  • I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?

    I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?
    Do Not post stuff about how Airplay doesnt work, because i dont have Apple TV and dont need to hear about it.

    If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

  • MacBook Pro 17" with Intel Core 2 Duo startup freeze with 10.6.8?

    With my MacBook Pro 17" with Intel Core 2 Duo, 2.33 GHz startup freeze with 10.6.8 - I had problems after several SW upgrades. Startup ends every time in a freeze or a crash, nothing is running, i am not able to type in the password. it starts in beginning with thin colored disrupting lines on the display and this get more and more and than freeze the system.
    "Save Boot", startup with shift shows no problems, display is ok, no freeze. So something must new in the video-driver. Is there any driver what I can delete or any new software to help in this issue?

    try to boot off the cd installazzione, when the screen appears to follow thePACKING screen viewing. If you've already looked in the manual are your problem?

  • Cable that will connect to a VGA port on a TV from my MacBook Pro (2.4GHz Intel Core 2 Duo)

    Hi,
    The HDMI port on my Maxent tv is not working.  I am hoping to connect my MacBook Pro to the TV via the VGA port on the TV to watch Netflix and movies.  What cables do I need that will connect to a VGA port on a TV from my MacBook Pro (2.4GHz Intel Core 2 Duo)?  And will that cable support audio or will I need a separate audio cable?
    Thanks-
    Sheri

    Hi Sheri,
    The Core 2 Duo MacBook Pro models have a Mini DisplayPort for video out, which can be connected to a VGA connector using Apple's adapter. See this product page -
    Mini DisplayPort to VGA Adapter - Apple Store (U.S.)
    VGA does not carry an audio signal.
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • When I begin to attempt to download the windows support software in boot camp, it says the windows support software is unavailable. Is there any other place I can download it for a Macbook Pro 5,5 intel core 2 duo without the original CD?

    When I begin to attempt to download the windows support software in boot camp, it says the windows support software is unavailable. Is there any other place I can download it for a Macbook Pro 5,5 intel core 2 duo with snow leopard without the original CD?

    Hi,
    apart from the MacBook Air this feature is of no use for other Macs right now.
    Simply ingnore it (click "I already have the Drivers...) and continue with the installation.
    Sorry to say but you need the OSX Install DVD for the BootCamp Driver installation.
    The 3.0 version of the BootCamp Drivers is only avaiable on the disc.
    Later updates (3.1 and 3.2) can be downloaded from Apples Support website.
    Call Apple and ask for a replacement and they usually send you one for a small fee.
    And have the Serial-Number of your Mac at hand when calling.
    And since the OSX Install DVD can also be vital for maintenance and repair it is best to have one.
    The needed BootCamp Drivers are on the OSX Install DVD 1 that came with your Mac.
    Insert that disc while in Windows after the Windows installation to install the drivers.
    Regards
    Stefan

  • Since my macbook pro is an intel core duo but not a core 2 duo, I cannot upgrade to Yosemite.  So... what OS X can I upgrade to with this computer?

    Since my macbook pro is an intel core duo but not a core 2 duo, I cannot upgrade to Yosemite.  So... what OS X can I upgrade to with this computer? Thanks for the input.

    Intel Core Duo is a 32-bit processor, so the latest Mac OS X version you can install is Mac OS X Snow Leopard -> http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    You are running Mac OS X 10.6.8, so you are already running the most recent Mac OS X version for your computer.

  • Purchase RAM for Macbook Pro  2.26GHz Intel Core 2 Duo Mid-2009

    Hello,
    I need to upgrade the current memory(2 GB) of my Macbook pro (2.26GHz Intel Core 2 Duo Mid-2009) model..Can someone please suggest where I could purchase and what is the maximum and optimal that I could buy.
    Also I reside in India, so should I get it online or from the apple store which is like 100 km (nearest) from my place .
    Thanks
    Shubham

    You can buy them oniine if you wish to do so.  Buying it from Apple is a good idea but would cost more, and since it's 100km away, after your gas = more money.
    The maximum you can install is 8GB.  Your RAM specs are 1333MHz - DDR3 - 204PIN SODIMM.
    Check here for current prices online and compare to the price Apple sells them in your area.
    If you're not in a big rush - then buying online is a good idea.
    Good luck

  • Stock RAM Configuration for 15" MacBook Pro 2.4GHz Intel Core 2 Duo

    Hello,
    I have a new 15" MacBook Pro 2.4GHz Intel Core 2 Duo on it's way to me and I need to order a RAM upgrade. I know the specifications of what I need, but am getting conflicting information from the retailer on how the stock models are configured for RAM. The total amount is 2GHz. Does anyone know if this amount is provided by one or two RAM modules?
    "Technological change is like an axe in the hands of a pathological criminal.” (Albert Einstein, 1941),
    Dr. Z.
    Message was edited by: Dr. Z.
    Message was edited by: Dr. Z.

    You'll find the RAM is in a 2 x 1GB configuration. Unfortunately they both need to come out for you to upgrade to 4GB RAM in a 2 x 2GB configuration. Still cheaper than going with Apple which makes it a little softer.

  • What is the RAM limit in a macbook pro 2.33ghz intel core 2 duo.?

    Hello
    I have a macbook pro 2.33 ghz intel core 2 duo with
    2 GB 667 MHZ DDR2 SDRAM
    What is the RAM limit i can install? 3GB or 4GB?, how do i know that? I dont have the manual.
    thank you
    Leo.

    What is the RAM limit in a macbook pro 2.33ghz intel core 2 duo.?
    3GB. You can install 4GB. The computer will only utilize approximately 3.3GB though.
    http://www.everymac.com/systems/apple/macbook_pro/stats/macbook-pro-core-2-duo-2 .33-15-specs.html
    -Bmer
    Mac Owners Support Group - Join us @ MacOSG.com
      Mac611 Mobile Mac Support - about.Mac611.com
       iTunes:MacOSG Podcast | YouTube.MacOSG.com
                       An Apple User Group 
    Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

  • How to upgrade to 10.6 MacBook Pro 2.16 Intel Core Duo 1G 667 MHz DDR2 SDRAM

    how to upgrade to 10.6   I have a MacBook Pro 2.16 Intel Core Duo 1G 667 MHz DDR2 SDRAM

    HI..
    You can purchase Snow Leopard from the Apple online store >  Mac OS X 10.6 Snow Leopard - Apple Store
    Make sure your Mac meets Snow Leopard requirements >  Mac OS X v10.6 Snow Leopard - Technical Specifications
    edited by:  cs

  • My battery is not charging and condition is normal [MacBook Pro 2012]

    Well my battery is not charging and it says that condition is normal (image below):
    I went to an iShop in México and the dude that works there said to me: "it is working fine", I dont know what to do, help please?

    You are still under warranty and/or have AppleCare, call them.  Let them deal w/it.

  • I have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder.

    i have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder. or sometimes appears the apple logo and than back again to the interrogation folder... Help please!!!!

    mcbsousa wrote:
    hm... Is there any chance of making the bootable usb file and send it by dropbox or something like that? than put it in a pen drive and connect to the mac??
    Sending by Dropbox where, To who, to what computer? As your does not start up.
    You need to take at least the OS disc to a work Mac computer and create DMG from the OS install disc then restore that DMG to USB thumb drive. Then you can boot the computer from that thumb drive and install the OS. That is if your hard drive is functioning correctly.
    Then you can use the App disc in the external CD/DVD drive to load up all the included Applications that come with your version of OS X.

Maybe you are looking for

  • Not being recognized by Itunes for Windows. 0xE8000001 Error

    not being recognized by Itunes for Windows. 0xE8000001 Error I get this message when trying to sync my IPOD Touch 16GB after upgrading to 7.5. I have tried to remove 7.5 and reinstall 7.4 and still the same problem. I have it connected to the USB on

  • Blank header appears when validating  leave request from the UWL

    Hello, We are using SAP Portal 7.3 and BP_ERP5MSS 1.51 SP06 according note oss 1618269 with a backend ECC6 EHP5 SPS06. We are facing the following issue :: "Leave Request Approval screen is poping with blank header". This  issue occurs when launching

  • Replace function Issue

    Hi All, I using replace in my package and facing this issue. In my code i have temp fields 1 to 15. so when i use replace function to replace :temp1 value it also replaces value of :temp11.      :temp1 = some checks      :temp2 = some checks      :te

  • TIMER in the Application

    hello everybody, i have a problem: i need to make a timer for my application that send one mail to the admin at every months end.. so i ahev a timer class that do this. my question is...how and where can i define this timer ?? that when the applicati

  • Portal Time out

    Hi , I want to set the portal time out , such that if a user is not doing any activity , the portal should log him out(like banking websites) Please let me know the steps to do the same I found out that it can be set from System Administration --> Sy