Macbook Pro 13" Late 2011 slow when charging power

Anyone had this issue?
My Macbook Pro is a 13" late 2011, I5 and when i'm using it connected to the power it is much slower then when i'm using on batteries, even if the battery is fully charged.
I already tried to reset SMC, PRAM etc.
Any ideas?
Thanks
Thiago

Man punches himself in the nose. "OW!" he says. He punches himself again. "OW!!" he says. After the sixth or seventh time, he asks a friend how he can stop his nose from hurting.
"Stop punching yourself in the nose," the friend advises.

Similar Messages

  • Macbook Pro 13" late 2011 crashes when i plug out a "Focusrite Saffire 6 USB" while in sleeping mode.

    Hi Forum,
    I have a problem with my Macbook Pro crashing when i plug out my "Focusrite Saffire 6 USB" while it´s still in sleep mode.
    I do have the latest drivers and updates so is there any way to fix that Problem ( besides not pluging it out while in sleep mode)?

    Man punches himself in the nose. "OW!" he says. He punches himself again. "OW!!" he says. After the sixth or seventh time, he asks a friend how he can stop his nose from hurting.
    "Stop punching yourself in the nose," the friend advises.

  • I have the new macbook pro from late 2011. when i try plugging my cannon gl2 into the mac via firewire 800 it does not show up in iMovie as an option to import from. i even have gone into my settings on the camera and changed it to vcr.

    I have the new MacBook Pro from late 2011. "the one before the new ritina display" i have a cannon gl2 video camera which is mini dv. when i plug it into my mac via firwire 800 it does not show up in the iMovie. i have set the settings on the camera to vcr mode and changed it to av->dv out. when i click on the import from camera on imovie it doesnt even show my camera in it. it just gives me the option to import video from my facetime camera. the camera is turned on the wires are connected i know for fact that its a firewire and not a usb. i know what they each look like. i bought the firewire cable and it was marked down cause it was an opened and used item. would it be possible that it could be deffected and if that is not the reason what other options do i have?

    I would say that odds are high that you have a bad cable. Maybe that is why they returned it.
    I would suggest trying a different firewire cable.
    You can find Firewire cables inexpensively at monoprice.com. You need a 4 pin to 9 pin firewire cable.
    Here is a link.
    http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10301
    Other things to check:
    Is your camera plugged in to wall power (not to batteries only). Must be hooked to an AC power source to import.

  • Macbook Pro 15" Late 2011 - Running Extremely Slow

    I've only had my Macbook Pro for about 9 months. Lately it's been running EXTREMELY slow, and freezing up at some times. I have a RAM monitor, and it will sometimes drop below 192MB! I have 4GB installed, and I only run a few light-weight applications, No Final Cut, or Photosop. On a typical day I'll have the following open at once: Safari, Spotify, Minecraft, Mail, Messages
    Nothing 4GB can't handle right? I guess not. I don't download from untrusted websites, so I doubt it's a virus. I honestly have no clue. I don't have the Apple Care, and I'm not sure if this is covered in the 1yr limited warranty that is included with the computer. Hopefully someone can help me resolve this issue.
    Thanks,
    Caleb.

    cdh0127
    Re: Macbook Pro 15" Late 2011 - Running Extremely Slow 
    09-Mar-2013 23:49 (in response to pennbank)
    I know how computers work.
    Oh Sorry Thought you were asking for assistance in solving a problem with your computer

  • I have a macbook pro 13' (late 2011) 2.8Ghz Intel i7 memory 4GB 1333 MHz DDR3 and have upgraded my OS X Lion to Mavericks. Everything has slowed down. How do I go back to the older OS X Lion? Or should I improve speed differently?

    I have a macbook pro 13’ (late 2011) 2.8Ghz Intel i7 memory 4GB 1333 MHz DDR3 and have upgraded my OS X Lion to Mavericks 10.9.5. Everything has slowed down and the battery lasts a bit earlier. How do I go back to the older OS X Lion? Or should I improve speed differently? Would improving memory to 8GB help?

    i have run the EntreCheck and here is the report:
    EtreCheck version: 1.9.15 (52)
    Report generated 28 September 2014 16:16:39 GMT+3
    Hardware Information: ?
      MacBook Pro (13-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.8 GHz Intel Core i7 CPU: 2 cores
      4 GB RAM
    Video Information: ?
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ?
      OS X 10.9.5 (13F34) - Uptime: 0 days 4:59:22
    Disk Information: ?
      TOSHIBA MK7559GSXF disk0 : (750.16 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 749.3 GB (203.96 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      MATSHITADVD-R   UJ-8A8 
    USB Information: ?
      Apple Inc. FaceTime HD Camera (Built-in)
      Vodafone (ZTE) Vodafone Mobile Broadband K3565-Z
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ?
      Apple Inc. thunderbolt_bus
    Gatekeeper: ?
      Mac App Store and identified developers
    Kernel Extensions: ?
      [not loaded] com.ZTE.driver.ModemDriverMac (1.0.2d1) Support
      [loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.1) Support
      [not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.1) Support
      [not loaded] com.roxio.BluRaySupport (1.1.6) Support
      [not loaded] com.roxio.TDIXController (2.0) Support
    Startup Items: ?
      HWNetMgr: Path: /Library/StartupItems/HWNetMgr
      HWPortDetect: Path: /Library/StartupItems/HWPortDetect
      StartOuc: Path: /Library/StartupItems/StartOuc
    Launch Daemons: ?
      [running] cn.com.zte.PPPMonitor.plist Support
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [running] PPPMonitord.plist Support
    Launch Agents: ?
      [running] cn.com.zte.usbswapper.plist Support
      [running] com.hp.devicemonitor.plist Support
      [loaded] com.hp.messagecenter.launcher.plist Support
      [running] Swapper.plist Support
    User Login Items: ?
      iTunesHelper
      Dropbox
    Internet Plug-ins: ?
      SharePointBrowserPlugin: Version: 14.0.0 Support
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      Default Browser: Version: 537 - SDK 10.9
    Safari Extensions: ?
      AdBlock-2
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
      Flash Player  Support
      MacFUSE  Support
      Tuxera NTFS  Support
    Time Machine: ?
      Time Machine not configured!
    Top Processes by CPU: ?
          5% Safari
          3% WindowServer
          2% BitTorrent
          2% hidd
          0% softwareupdated
    Top Processes by Memory: ?
      229 MB Safari
      160 MB softwareupdated
      156 MB com.apple.WebKit.WebContent
      135 MB com.apple.IconServicesAgent
      102 MB VLC
    Virtual Memory Information: ?
      45 MB Free RAM
      1.55 GB Active RAM
      1.52 GB Inactive RAM
      895 MB Wired RAM
      628 MB Page-ins
      0 B Page-outs

  • I have upgraded my MacBook Pro 15 late 2011 to 8Gb RAM, now when I go to about this mac in it more info it doesn't show AMD graphics card as it used to before, it just show  Intel HD Graphics 3000 512 MB is that a problem that I need to worry about?

    I have upgraded my MacBook Pro 15 late 2011 to 8Gb RAM, now when I go to about this mac in it more info it doesn't show AMD graphics card as it used to before, it just show  Intel HD Graphics 3000 512 MB is that a problem that I need to worry about?
    and in system report >> hardware >> Graphics/Display >> it shows both grafics card listed.

    Some Mac's when the RAM is increased the Intel HD 3000 integrated graphics will bump itself up to the higher video RAM it takes, this seems to be what occured.
    It also means the dedicated graphics card will be used less, but only so slightly less.
    You obviously still should have both, you can test this by turning off Graphics Switching in Energy Saver, that will use the decicated AMD card all the time.
    You can also run Cinebench and compare the scores here
    Mac video card performance

  • Is it okay my Macbook Pro 13" (late 2011) is on 80° to about 92 when playing games and stuff like that?

    Title^^
    "Is it okay my Macbook Pro 13" (late 2011) is on 80° to about 92 when playing games and stuff like that?"

    Well, I just thought when I bought a computer to 1200$, i would be able to run atleast games which do not requirer that much GPU power. I only play games like Counter strike: Global Offensive, Counter strike: Source and league of legends.

  • How long to boot MacBook pro 13" late 2011?

    It takes 1 minute 30 seconds to startup my macbook pro 13" late 2011 (2.4ghz i5 processor, 4GB RAM)
    This seems like a long time? I have Microsoft Office and Photoshop installed, will this slow it down?
    Thanks!

    if you have a normal hard drive installed - it usually takes a minute to desktop when you power up.
    check your login items to see what's loading when you first power up your Macbook.
    you can also go to disk utility and verify your disk permissions - repair them if errors are found then restart your Macbook. 
    see if that helps your booting time.
    good luck

  • Macbook Pro 13" Late 2011 hard drive fails, how to replace hard drive?

    Hi!
    I have a Macbook Pro 13" Late 2011 (OS X Mountain Lion v 1.3.18 (352.4). I tried to install OS X Mavericks but it showed this error message:
    "This disk has S.M.A.R.T. errors. This disk has a hardware problem that can't be repaired. Back up as soon much data as possible and replace the disk."
    The laptop was still doing fine so I didn't do anything. Then it started to act funny: iPhoto stopped working, hangs when I watch video streaming, and it started to run really slow. I only use the laptop's basic features- internet, watching movies, editing using iMovies so it's really strange for me that the hard drive failed all of a sudden.
    I called Apple support and a kind fellow tried to troubleshoot it, thinking it was only a software problem. In the end, he said I need to bring my macbook to the service center and have the hard drive replaced. I know it will cost a lot so I want to replace the it myself.
    Here are my questions:
    1) Can this problem really be solved by just replacing the hard drive?
    2) Can I use SSD this time so my Macbook can run faster?
    3) What SSD is recommended for my late 2011 Macbook 13"?
    4) I don't have the installation disk, can I still install the OS X Mountain Lion? How?
    I am looking for other sites as well but I hope this community could share some tips too.
    Thanks a lot!

    I've switched out the hard drive on my Late 2011 model several times and I've never disconnected the battery cable.
    In my "Opinion" it is not necessary to do that. Not sure if it is or not recommended by Apple.
    EDIT:
    I just looked at my User Manual, PDF I downloaded from Apple, and there is no mention of disconnecting the battery.
    Here's a link to the manual for my model.
    http://manuals.info.apple.com/MANUALS/1000/MA1602/en_US/macbook_pro_15inch_late_ 2011.pdf

  • MacBook Pro 13'' late 2011 battery health problem!!! HELP!!!

    I have a MacBook Pro 13'' late 2011.
    It's this normal? How do I increase my battery health?
    Can I change my battery?

    When did you buy it?
    Do you run it down to near zero % before recharging? Which is a bad thing to do.
    Do you charge it to 100% before you take it off the charger?
    Do you always disconnect the charger once it reaches 100% even if you are right next to an AC outlet. Which is a bad idea.
    Batteries only last so long. Over use it and it will go bad sooner.

  • Notification center stops working on Macbook pro 17 late 2011

    I had several problems with Mountain Lion on Macbook pro 17 late 2011 model.
    #1 Notification center stopped updating
    #2 Worst battery backup had dropped significantly , it appears that the laptop needs to be plugged in to the socket at all time. Current backup is around 2 hours.
    Anyone else got similar issues ?

    85w apple charger stops charging the Mac
    I think your assumption that when the amber light goes out, the magsafe is malfunctioning is not correct.
    Some users have observed that if you push your Big MacBook Pro as hard as you can, it needs all the power from the power adapter (and possibly more from the battery) just to keep running. Thus, the charge indicator on the magsafe will go off Amber. This is weird, but is not a malfunction.

  • MacBook Pro 15" Late 2011 Problems with iMac 27" Late 2009 TDM

    Hi,
    I just got problems with my iMac 27" Late 2009 (Mini-DisplayPort) and my MacBook Pro 15" Late 2011 (Thunderbolt).
    When I try to use my iMac as external monitor for my MacBook, there are massive glitches and graphical bugs on my second screen.
    I bought a MDP-to-MDP wire from Belkin which works perfect on other computers.
    I tried these things:
    - Disconnected MagSafe from MacBook + unplugged all USB devices + switched graphics to discrete.
    - Shut down all computers ... then booted MBP, iMac and triggered CMD+F2
    - SMC, PRAM reset on both devices
    The cable works, because:
    17" MacBook Pro Late 2011 works perfectly on my iMac screen with my Belkin wire!
    I connected my MacBook Pro 15" to a 27" Cinema Display and it works flawless.
    After that I plugged it out and tested it again with my iMac screen -> suddenly it works.
    Retriggering CMD+F2 or replugging breaks it again with massive bugs.
    The MacBook Pro 17" is on 10.7.2, 15" is on 10.7.3, but I also tried to trigger dual screen in 10.7.0 setup with the same issue.
    Maybe its a problem with the internal 6750M of my MacBook Pro 15"?
    The 6770M of the 17" is working well.
    Sample Video:
    http://www.youtube.com/watch?v=W_pgc52syes
    All updates/firmware updates of iMac and MacBook Pro are installed.
    Any solutions?
    Greets,
    Kai

    Since this is a user to user forum with no employees participation, your plea is a good a screaming into the wilderness.  I suggest that you post your thoughts here:
    https://www.apple.com/feedback/

  • Macbook Pro 13" (Late 2011) Bottom Plate Bulging

    Hello there,
    I own a Macbook Pro 13" (Late 2011). I have had it for sometime now.
    I noticed that the bottom plate (the piece of aluminum that can be removed) is slightly loose in the front. There is a slight retreat when I press down on it. This is not happening to my newer Late 2013 15" Macbook Pro.
    I heard that this can be caused by a swelling battery?! My battery has around 350 cycles on it.
    Should I be concerned? Is it necessary to take it to an Apple Store and have them take a look at it??
    Thanks for your answers in advance.

    That could be the case. It wouldn't hurt to have them evaluate it at an Apple Store as the appointment is free.

  • MacBook Pro 13" Late 2011, 16GB RAM and Apple Premium Service Center

    Hello all,
    My dad has a MacBook Pro 13" Late 2011, it came with a 4GB RAM. When he got Parallels and installed Windows 8, 4GB RAM were not enough to even deal with Safari so he had to buy 16GB RAM from Cruical. Today when he went to Apple Premium Service Center here in Qatar (51 East) they refused to install the x2 8GB RAM and only installed one of them. They kept warning my dad that installing the whole 16GB can cause issues with the MacBook Pro HDD and can make it go faulty. I wanted to ask if installing RAMs can pose the HDD life to any danger. Because my dad uses his Mac for work and wouldn't like to lose any of his files against small additional speed.
    Thanks.

    its very easy to do, here are step by step instructions with photos

  • Macbook pro 13" late 2011 stuck up at apple logo and spinning wheel, changed HDD problem still exists

    i have a macbook pro 13' late 2011 unit and its not starting up, found out that the HDD was defective, but when i changed the HDD the problem still exists, what may be the problem?
    thanks

    Have you tried booting into the Recovery HD and running Disk Utility and checking to see if the HD needs repairs?
    Restart holding Command + r and at the recovery screen select Disk Utility. Then select Macintosh HD and click  on 'repair disk'. If anything gets altered click on repair disk again until you get a clean pass. Restart as normal from the Apple menu. More info here about the Recovery HD:
    http://support.apple.com/kb/HT4718

Maybe you are looking for

  • Since upgrading to iTunes 11, Spinning beach ball every time I open.

    Every time I open iTuness 11, after about 30 seconds I get the spinning wheel of death for about 3 minutes. Most of the time it comes back but occasionally it locks up the Mac fully.  I have a MacBook Pro 1st Thunder Bolt generation, Core I7, 8GB RAM

  • How to stop an iphone from "thinking" a phone no. is another iphone?

    I had an iphone 4 but then switched to a different device (ported my number out) and now I can no longer receive texts from my friend with an iphone 5 who used to send me messages using iMessage because the iphone 5 continues to "think" my phone numb

  • I want my AVI files from Hard disk for FMLE

    Is it possible to get AVI files from my Hard disk for FMLE if yes How..? Thanks in advance

  • Password protecting a Numbers worksheet

    Hi gang! I'm very new to Mac (bought my first MacBook 3 days ago!) and I'm just as new to iWork. I'm trying to use Numbers with old Excel spreadsheets that I've converted. One of the things that I loved about Excel is that you could password protect

  • Adding a VGA or DVI Display to iMac

    Good morning Apple Community.  I would like to attach a second display to my new iMAC Intels.  The trouble is, I can't find an adapter to go from Thunderbolt to VGA or DVI. Does apple make such an adapter?  I would like to utilize the monitors I curr